From: "Éric Brunet" <ebrunet-l5PIGlIYzrxGWvitb5QawA@public.gmane.org>
To: acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
Subject: Re: [ACPI] laptop turns itself off
Date: Tue, 23 Jul 2002 20:33:21 +0200 [thread overview]
Message-ID: <20020723183320.GA25180@lps.ens.fr> (raw)
In-Reply-To: <20020710132039.B17998-/+vdk8Lzq6wBYXXUC76CrNADJCGDAxhI@public.gmane.org>
On Wed, Jul 10, 2002 at 01:20:39PM -0500, Bob McElrath wrote:
> I have a laptop that spontaneously turns itself off about once or twice
> a day. It is an all-ACPI model from Compal model ACL00. I understand
> it is equivalent to a Toshiba Satellite 3000 series. The computer
> itself is the Emperor Linux model from http://www.aslab.com/.
I have the same problem with toshiba S3000-X11.
It happens even when the computer is cool. However, I think it is related to temperature:
I have spent some time looking at the temperature of the computer, as
reported by Bruno Ducrot's tosh300k module (the DSDT is buggued, so there
is no thermal zone unless you change it, which I haven't done yet)
The temperature behaves most of the time nicely: it increases slowly from
the lower value to the higher, then goes down quickly as the fan gets on.
However, at some times, the sensor report some aberrant value; like 15 or
20 or more degrees (Centigrade) off. It lasts for one or two seconds and
goes back to normal.
I believe that at some point, the grossely incorrect reported temperature
triggers the emergency shutdown.
I don't know what I should do. Is there a way to disable the emergency
shutdown (the fan works correctly, thank you) ? Is it possible to make
the emergency procedure average the temperature for 5 seconds before
deciding to shut down ? Is there a way to fix the sensors so that they
don't report wrong values ?
Of course, the other possibility is that the shutdown has nothing to do
with temperature, and that the wrong values reported by the sensors are
just a coincidence.
Eric Brunet
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
next parent reply other threads:[~2002-07-23 18:33 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20020710132039.B17998@draal.physics.wisc.edu>
[not found] ` <20020710132039.B17998-/+vdk8Lzq6wBYXXUC76CrNADJCGDAxhI@public.gmane.org>
2002-07-23 18:33 ` Éric Brunet [this message]
[not found] ` <20020723183320.GA25180-l5PIGlIYzrxGWvitb5QawA@public.gmane.org>
2002-07-23 20:17 ` laptop turns itself off Bob McElrath
[not found] ` <20020730080803.GA10077@lps.ens.fr>
[not found] ` <20020730080803.GA10077-l5PIGlIYzrxGWvitb5QawA@public.gmane.org>
2002-07-30 16:27 ` Bob McElrath
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20020723183320.GA25180@lps.ens.fr \
--to=ebrunet-l5pigliyzrxgwvitb5qawa@public.gmane.org \
--cc=acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox