From mboxrd@z Thu Jan 1 00:00:00 1970 From: Dominik Brodowski Subject: Re: Failure w/ latest ACPI patch... Date: Tue, 30 Jul 2002 16:54:33 +0200 Sender: acpi-devel-admin-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org Message-ID: <20020730165433.A1445@brodo.de> References: <20020729210341.B11837@tarnation.dyndns.org> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-15 Return-path: Content-Disposition: inline In-Reply-To: <20020729210341.B11837-2LEdZMXKCZJeeLb3ft/vUmD2FQJk+8+b@public.gmane.org>; from prothonotar-2LEdZMXKCZJeeLb3ft/vUmD2FQJk+8+b@public.gmane.org on Mon, Jul 29, 2002 at 09:03:41PM -0400 Errors-To: acpi-devel-admin-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: Aaron Gaudio Cc: Linux ACPI Devel Mailing List List-Id: linux-acpi@vger.kernel.org Hi, Intersting problem you're reporting here: On Mon, Jul 29, 2002 at 09:03:41PM -0400, Aaron Gaudio wrote: > I notice that in the acpi-patched version, there is some (possibly > BIOS?) message before the actual dmesg output gets printed Even before "uncompressing kernel...." ??? , and > for at least one of those devices for which an IRQ is not found, it > says it will use IRQ 255. That's BAD. IRQ 255 does not exist on any known laptop, I dare to say. > Unfortunately, because the boot sequence does not complete, I don't > have the output of dmesg available for the failed boot (I can always > attach one for the RH-based kernel, if anyone would like to see that). Could you pass pci=noacpi to the ACPI kernel, and try if it boots, please? Dominik ------------------------------------------------------- This sf.net email is sponsored by: Dice - The leading online job board for high-tech professionals. Search and apply for tech jobs today! http://seeker.dice.com/seeker.epl?rel_code=31