From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Jose E. Marchesi" Subject: some fan questions Date: Tue, 3 Sep 2002 11:06:16 GMT Sender: acpi-devel-admin-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org Message-ID: <200209031106.LAA18605@es.gnu.org> Return-path: Errors-To: acpi-devel-admin-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org List-Id: linux-acpi@vger.kernel.org Hi, I have some questions about ACPI and the fan control. I run a GNU System (Debian Woody) over a Linux kernel 2.4.18. In /proc/acpi/thermal_zone/THRM/trip_points: critical (S5): 100 C passive: 92 C: tc1=2 tc2=5 tsp=300 devices=0xcffe0d68 active[0]: 100 C: devices=0xc143c6c8 I think 100 C is too hot for my system! How can i change these values? Can i add new trippoints? By the way, when i do: echo -n 0 > /proc/acpi/fan/FAN/state the state change to 'on', but the machine fan doesnt start. I have an HP OmniBook XE3. Thanks in advance! -- Jose E. Marchesi GNU Spain http://es.gnu.org GNUs Not Unix! http://www.gnu.org -- "And if cynics ridicule freedom, ridicule community... if 'hard nosed realists' say that profit is the only ideal...just ignore them, and use copyleft all the same." -- RMS --- ------------------------------------------------------- This sf.net email is sponsored by: OSDN - Tired of that same old cell phone? Get a new here for FREE! https://www.inphonic.com/r.asp?r=sourceforge1&refcode1=vs3390