Re: Armada 110

[FrAnKenstEin <fake-3RXyrymLNR0b1SvskN2V4Q@public.gmane.org>]

Weee!

Thanks! That works ;)
I actually already had a look at those methods, but i wasn't sure about what the
methods did.. and started Store(..,Debug) - analyzing them ;)

Thanks for your quick help again...

Thomas Jakobi

On Thu, Nov 14, 2002 at 08:01:56AM +0100, Zden?k OGAR Skal?k wrote:
> Hi,
> 
> 	I have Armada 110 too & had the same problem. After fiddling with DSDT, I found
> solution (at least it's working for me :-)
> 	Try this: 
> 		a) dissasemble DSDT
> 		b) patch according to cpqlinux-page
> 		c) patch the method _BST in device BAT1 
>                    (should be in about 11% of file):
>                          Else
>                          {
> 				\_SB.Z000(0x8A)
> 				SEBS /* \_SB.BAT1.SEBS */()
> +				UPBS /* \_SB.BAT1.UPBS */()
> 			 }
> 		d) assemble & try
> 
> 	My own opinion is, that 
> 	a) SEBS is SetBateryStatus <-- store "static status" information about batery		
> 	b) UPBS is UpdateBatteryStatus <-- update according to "current state"
> 
> 	Hope it help :-) By
> 
> 		Zdenek OGAR Skalak
> -- 
> Ing. Zden?k OGAR Skal?k
> Monet+ a.s.
> Z?meck? 365
> 763 14 Zl?n - ?t?pa, CZ
> Tel: +420 / 577 110 411,  Fax: +420 / 577 914 557



-------------------------------------------------------
This sf.net email is sponsored by: To learn the basics of securing 
your web site with SSL, click here to get a FREE TRIAL of a Thawte 
Server Certificate: http://www.gothawte.com/rd524.html