From mboxrd@z Thu Jan 1 00:00:00 1970 From: Chris Howells Subject: Re: Latest ACPI + cpufreq on a Dell Inspiron 2650 Date: Mon, 2 Dec 2002 22:00:09 +0000 Sender: acpi-devel-admin-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org Message-ID: <200212022200.14480.chris@chrishowells.co.uk> References: <200212022050.26628.chris@chrishowells.co.uk> <20021202215309.J27991@parcelfarce.linux.theplanet.co.uk> Mime-Version: 1.0 Content-Type: Multipart/Mixed; boundary="Boundary-00=_pf969W/7snXOJca" Return-path: In-Reply-To: <20021202215309.J27991-+pPCBgu9SkPzIGdyhVEDUDl5KyyQGfY2kSSpQ9I8OhVaa/9Udqfwiw@public.gmane.org> Errors-To: acpi-devel-admin-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: Matthew Wilcox Cc: acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org List-Id: linux-acpi@vger.kernel.org --Boundary-00=_pf969W/7snXOJca Content-Type: Text/Plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Content-Description: clearsigned data Content-Disposition: inline -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, On Monday 02 December 2002 21:53, Matthew Wilcox wrote: > can you reproduce the problem without the tainting vmware modules loaded? Yes, all problems can be re-produced in run level 3 (e.g. without vmware and NVidia modules). lsmod shows: Module Size Used by Not tainted serial_cs 4384 0 (unused) i810_audio 20256 0 (autoclean) soundcore 3492 2 (autoclean) [i810_audio] ac97_codec 9856 0 (autoclean) [i810_audio] ipt_TOS 1088 5 (autoclean) ipt_state 608 4 (autoclean) ipt_REJECT 2848 7 (autoclean) ipt_LOG 3168 15 (autoclean) ipt_limit 960 17 (autoclean) ipt_MASQUERADE 1216 2 (autoclean) printer 6720 0 iptable_mangle 2208 1 (autoclean) iptable_nat 13908 1 (autoclean) [ipt_MASQUERADE] ip_conntrack 16652 2 (autoclean) [ipt_state ipt_MASQUERADE iptable_nat] iptable_filter 1728 1 (autoclean) ip_tables 10624 11 [ipt_TOS ipt_state ipt_REJECT ipt_LOG ipt_limit ipt_MASQUERADE iptable_mangle iptable_nat iptable_filter] irda-usb 10016 0 (unused) irda 78284 0 [irda-usb] mousedev 3808 0 (unused) 3c59x 25000 1 (autoclean) hid 17952 0 (unused) input 3264 0 [mousedev hid] usb-uhci 21220 0 (unused) usbcore 55008 1 [printer irda-usb hid usb-uhci] rtc 5756 0 (autoclean) Proper dmesg attached. - -- Cheers, Chris Howells -- chris-NvB7AskkBIqIudiWw5vspbVCufUGDwFn@public.gmane.org, howells@kde.org Web: http://chrishowells.co.uk, PGP key: http://chrishowells.co.uk/pgp.txt KDE: http://www.koffice.org, http://printing.kde.org, http://usability.kde.org -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.0 (GNU/Linux) iD8DBQE969fuF8Iu1zN5WiwRAgfTAJwMre6Xlvd5fkHlrgYLRuZlr/5d/QCeOd81 geZXb1kTlnaqkFs36o7JE1Q= =9R97 -----END PGP SIGNATURE----- --Boundary-00=_pf969W/7snXOJca Content-Type: text/plain; charset="iso-8859-1"; name="dmesg.txt" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="dmesg.txt" Linux version 2.4.20acpidebug (root@gandalf) (gcc version 2.95.4 20011002 (= Debian prerelease)) #3 Mon Dec 2 01:22:02 GMT 2002 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000007ef0000 (usable) BIOS-e820: 0000000007ef0000 - 0000000007eff000 (ACPI data) BIOS-e820: 0000000007eff000 - 0000000007f00000 (ACPI NVS) BIOS-e820: 0000000007f00000 - 0000000007f80000 (usable) BIOS-e820: 0000000007f80000 - 0000000008000000 (reserved) BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) 127MB LOWMEM available. ACPI: have wakeup address 0xc0001000 On node 0 totalpages: 32640 zone(0): 4096 pages. zone(1): 28544 pages. zone(2): 0 pages. ACPI: RSDP (v000 DELL ) @ 0x000f6740 ACPI: RSDT (v001 DELL RSDT 01540.00000) @ 0x07efadcf ACPI: FADT (v001 INTEL 845M 01540.00000) @ 0x07efef8c ACPI: DSDT (v001 DELL 845M 01540.00000) @ 0x00000000 ACPI: BIOS passes blacklist Kernel command line: BOOT_IMAGE=3DLinux ro root=3D306 hdc=3Dide-scsi 3 ide_setup: hdc=3Dide-scsi Initializing CPU#0 Detected 1894.452 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 3774.87 BogoMIPS Memory: 126464k/130560k available (1311k kernel code, 3644k reserved, 580k = data, 96k init, 0k highmem) Dentry cache hash table entries: 16384 (order: 5, 131072 bytes) Inode cache hash table entries: 8192 (order: 4, 65536 bytes) Mount-cache hash table entries: 2048 (order: 2, 16384 bytes) Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes) Page-cache hash table entries: 32768 (order: 5, 131072 bytes) CPU: L1 I cache: 0K, L1 D cache: 8K CPU: L2 cache: 512K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 3febf9ff 00000000 00000000 00000000 CPU: Common caps: 3febf9ff 00000000 00000000 00000000 CPU: Intel(R) Pentium(R) 4 Mobile CPU 1.90GHz stepping 04 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch-r1x6VkxMR+00zabcByZE4g@public.gmane.org) mtrr: detected mtrr type: Intel ACPI: Subsystem revision 20021122 PCI: PCI BIOS revision 2.10 entry at 0xfd9c5, last bus=3D2 PCI: Using configuration type 1 tbxface-0099 [03] Acpi_load_tables : ACPI Tables successfully acquired Parsing Methods:...........................................................= =2E........................................................................= =2E............. Table [DSDT] - 530 Objects with 51 Devices 146 Methods 16 Regions ACPI Namespace successfully loaded at root c0302dfc evxfevnt-0074 [04] Acpi_enable : Transition to ACPI mode successf= ul evevent-0511: *** Info: GPE Block0 defined as GPE0 to GPE15 evevent-0511: *** Info: GPE Block1 defined as GPE16 to GPE31 Executing all Device _STA and_INI methods:.................................= =2E................. 51 Devices found containing: 51 _STA, 1 _INI methods Completing Region/Field/Buffer/Package initialization:.....................= =2E.......................... Initialized 13/16 Regions 0/0 Fields 20/20 Buffers 15/15 Packages (530 node= s) ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: System [ACPI] (supports S0 S1 S3 S4 S5) ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) Transparent bridge - Intel Corp. 82801BAM/CAM PCI Bridge ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 11 12 14 15, disabled) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: Embedded Controller [EC0] (gpe 28) schedule_task(): keventd has not started pci_bind-0194 [09] acpi_pci_bind : Device 00:00:1d.02 not present i= n PCI namespace PCI: Probing PCI hardware ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9 PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=3Dnoacpi' or even 'a= cpi=3Doff' Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket cpufreq: P4/Xeon(TM) CPU On-Demand Clock Modulation available Starting kswapd Journalled Block Device driver loaded exfldio-0122 [30] Ex_setup_region : Field [ACPW] Base+Offset+Width 3= 8+0+4 is beyond end of region [GPIO] (length 3B) psparse-1103: *** Error: Method execution failed, AE_AML_REGION_LIMIT Method pathname: \_SB_.PCI0.LPCB.ACAD._PSR (Node c7e94728) acpi_ac-0083 [14] acpi_ac_get_state : Error reading AC Adapter state ACPI: Battery Slot [BAT1] (battery present) ACPI: Power Button (FF) [PWRF] ACPI: Lid Switch [LID] ACPI: Sleep Button (CM) [SLPB] ACPI: Processor [CPU0] (supports C1 C2, 2 performance states, 8 throttling = states) vga16fb: initializing vga16fb: mapped to 0xc00a0000 Console: switching to colour frame buffer device 80x30 fb0: VGA16 VGA frame buffer device pty: 256 Unix98 ptys configured i8k: unable to get SMM BIOS version Dell laptop SMM driver v1.13 14/05/2002 Massimo Dal Zotto (dz-8fiUuRrzOP0dnm+yROfE0A@public.gmane.org) Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_P= CI enabled Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=3D= xx ICH3M: IDE controller on PCI bus 00 dev f9 PCI: Device 00:1f.1 not available because of resource collisions ICH3M: BIOS setup was incomplete. ICH3M: chipset revision 2 ICH3M: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1840-0x1847, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1848-0x184f, BIOS settings: hdc:DMA, hdd:pio hda: IC25N020ATCS04-0, ATA DISK drive hdc: HL-DT-STCD-RW/DVD-ROM GCC-4240N, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 blk: queue c031ab44, I/O limit 4095Mb (mask 0xffffffff) [ACPI Debug] String: =3D=3D=3D=3D=3DQUERY_05=3D=3D=3D=3D=3D hda: 39070080 sectors (20004 MB) w/1768KiB Cache, CHS=3D2432/255/63, UDMA(1= 00) Partition check: hda: hda1 hda2 hda3 < hda5 hda6 hda7 > hda4 SCSI subsystem driver Revision: 1.00 scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: HL-DT-ST Model: RW/DVD GCC-4240N Rev: D110 Type: CD-ROM ANSI SCSI revision: 02 Linux Kernel Card Services 3.1.22 options: [pci] [cardbus] [pm] Intel PCIC probe: not found. Databook TCIC-2 PCMCIA probe: not found. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 8192 bind 8192) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. Yenta IRQ list 00b8, PCI irq10 Socket status: 30000411 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. =46reeing unused kernel memory: 96k freed Adding Swap: 248968k swap-space (priority -1) EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,6), internal journal Real Time Clock Driver v1.10e kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,7), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,4), internal journal EXT3-fs: mounted filesystem with ordered data mode. usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-uhci.c: $Revision: 1.275 $ time 01:19:39 Dec 2 2002 usb-uhci.c: High bandwidth mode enabled PCI: Setting latency timer of device 00:1d.0 to 64 usb-uhci.c: USB UHCI at I/O 0x1800, IRQ 10 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected PCI: Setting latency timer of device 00:1d.1 to 64 usb-uhci.c: USB UHCI at I/O 0x1820, IRQ 11 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: v1.275:USB Universal Host Controller Interface driver hub.c: new USB device 00:1d.1-1, assigned address 2 hub.c: USB hub found hub.c: 4 ports detected hub.c: new USB device 00:1d.1-1.1, assigned address 3 usb.c: USB device 3 (vend/prod 0x46d/0xc001) is not claimed by any active d= river. usb.c: registered new driver hiddev usb.c: registered new driver hid input0: USB HID v1.10 Mouse [Logitech USB Mouse] on usb2:3.0 hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik hid-core.c: USB HID support drivers 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html 02:01.0: 3Com PCI 3c905C Tornado at 0x3000. Vers LK1.1.16 hub.c: new USB device 00:1d.1-1.2, assigned address 4 mice: PS/2 mouse device common for all mice usb.c: USB device 4 (vend/prod 0x50f/0x180) is not claimed by any active dr= iver. usb.c: registered new driver irda-usb IRDA-USB found at address 4, Vendor: 50f, Product: 180 IrDA: Registered device irda0 USB IrDA support registered ip_tables: (C) 2000-2002 Netfilter core team ip_conntrack version 2.1 (1020 buckets, 8160 max) - 292 bytes per conntrack hub.c: new USB device 00:1d.1-1.4, assigned address 5 usb.c: USB device 5 (vend/prod 0x3f0/0x1904) is not claimed by any active d= river. usb.c: registered new driver usblp printer.c: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0= x03F0 pid 0x1904 printer.c: v0.11: USB Printer Device Class driver Intel 810 + AC97 Audio, version 0.21, 01:19:33 Dec 2 2002 PCI: Setting latency timer of device 00:1f.5 to 64 i810: Intel ICH3 found at IO 0x1880 and 0x1c00, IRQ 10 i810_audio: Audio Controller supports 6 channels. ac97_codec: AC97 Audio codec, id: =83=84v0(SigmaTel STAC????) i810_audio: only 48Khz playback available. i810_audio: AC'97 codec 0 Unable to map surround DAC's (or DAC's not presen= t), total channels =3D 2 ac97_codec: AC97 Modem codec, id: CXT33(Unknown) i810_audio: timed out waiting for codec 1 analog ready. cs: IO port probe 0x0c00-0x0cff: clean. cs: IO port probe 0x0800-0x08ff: clean. cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x4d0-0x4d7 cs: IO port probe 0x0a00-0x0aff: clean. cs: memory probe 0xa0000000-0xa0ffffff: clean. ttyS01 at port 0x02f8 (irq =3D 3) is a 16550A [ACPI Debug] String: =3D=3D=3D=3D=3DQUERY_08=3D=3D=3D=3D=3D [ACPI Debug] String: =3D=3D=3D=3D=3DQUERY_08=3D=3D=3D=3D=3D [ACPI Debug] String: =3D=3D=3D=3D=3DQUERY_08=3D=3D=3D=3D=3D exstore-0278 [59] Ex_store_object_to_ind: Could not store object to indexe= d package element psparse-1103: *** Error: Method execution failed, AE_BAD_HEX_CONSTANT Method pathname: \_SB_.PCI0.LPCB.BAT1._BIF (Node c7e91728) acpi_battery-0134 [48] acpi_battery_get_info : Error evaluating _BIF exstore-0278 [48] Ex_store_object_to_ind: Could not store object to indexe= d package element psparse-1103: *** Error: Method execution failed, AE_BAD_HEX_CONSTANT Method pathname: \_SB_.PCI0.LPCB.BAT1._BIF (Node c7e91728) acpi_battery-0134 [37] acpi_battery_get_info : Error evaluating _BIF exstore-0278 [38] Ex_store_object_to_ind: Could not store object to indexe= d package element psparse-1103: *** Error: Method execution failed, AE_BAD_HEX_CONSTANT Method pathname: \_SB_.PCI0.LPCB.BAT1._BIF (Node c7e91728) acpi_battery-0134 [27] acpi_battery_get_info : Error evaluating _BIF [ACPI Debug] String: =3D=3D=3D=3D=3DQUERY_08=3D=3D=3D=3D=3D exstore-0278 [63] Ex_store_object_to_ind: Could not store object to indexe= d package element psparse-1103: *** Error: Method execution failed, AE_BAD_HEX_CONSTANT Method pathname: \_SB_.PCI0.LPCB.BAT1._BIF (Node c7e91728) acpi_battery-0134 [52] acpi_battery_get_info : Error evaluating _BIF exstore-0278 [52] Ex_store_object_to_ind: Could not store object to indexe= d package element psparse-1103: *** Error: Method execution failed, AE_BAD_HEX_CONSTANT Method pathname: \_SB_.PCI0.LPCB.BAT1._BIF (Node c7e91728) acpi_battery-0134 [41] acpi_battery_get_info : Error evaluating _BIF exstore-0278 [41] Ex_store_object_to_ind: Could not store object to indexe= d package element psparse-1103: *** Error: Method execution failed, AE_BAD_HEX_CONSTANT Method pathname: \_SB_.PCI0.LPCB.BAT1._BIF (Node c7e91728) acpi_battery-0134 [30] acpi_battery_get_info : Error evaluating _BIF [ACPI Debug] String: =3D=3D=3D=3D=3DQUERY_08=3D=3D=3D=3D=3D exstore-0278 [67] Ex_store_object_to_ind: Could not store object to indexe= d package element psparse-1103: *** Error: Method execution failed, AE_BAD_HEX_CONSTANT Method pathname: \_SB_.PCI0.LPCB.BAT1._BIF (Node c7e91728) acpi_battery-0134 [56] acpi_battery_get_info : Error evaluating _BIF exstore-0278 [56] Ex_store_object_to_ind: Could not store object to indexe= d package element psparse-1103: *** Error: Method execution failed, AE_BAD_HEX_CONSTANT Method pathname: \_SB_.PCI0.LPCB.BAT1._BIF (Node c7e91728) acpi_battery-0134 [45] acpi_battery_get_info : Error evaluating _BIF exstore-0278 [45] Ex_store_object_to_ind: Could not store object to indexe= d package element psparse-1103: *** Error: Method execution failed, AE_BAD_HEX_CONSTANT Method pathname: \_SB_.PCI0.LPCB.BAT1._BIF (Node c7e91728) acpi_battery-0134 [34] acpi_battery_get_info : Error evaluating _BIF --Boundary-00=_pf969W/7snXOJca-- ------------------------------------------------------- This SF.net email is sponsored by: Get the new Palm Tungsten T handheld. Power & Color in a compact size! http://ads.sourceforge.net/cgi-bin/redirect.pl?palm0002en