Linux version 2.4.20 (root-bi+AKbBUZKY6gyzm1THtWbp2dZbC/Bob@public.gmane.org) (gcc version 2.96 20000731 (Mandrake Linux 8.1 2.96-0.62mdk)) #2 Fri Jan 3 09:03:59 IST 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 0000000000080000 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000dfec000 (usable) BIOS-e820: 000000000dfec000 - 000000000dfef000 (ACPI data) BIOS-e820: 000000000dfef000 - 000000000dfff000 (reserved) BIOS-e820: 000000000dfff000 - 000000000e000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 223MB LOWMEM available. ACPI: have wakeup address 0xc0001000 On node 0 totalpages: 57324 zone(0): 4096 pages. zone(1): 53228 pages. zone(2): 0 pages. ACPI: RSDP (v000 ASUS ) @ 0x000f8070 ACPI: RSDT (v001 ASUS A7N266VM 16944.11825) @ 0x0dfec000 ACPI: FADT (v001 ASUS A7N266VM 16944.11825) @ 0x0dfec100 ACPI: BOOT (v001 ASUS A7N266VM 16944.11825) @ 0x0dfec040 ACPI: MADT (v001 ASUS A7N266VM 16944.11825) @ 0x0dfec080 ACPI: DSDT (v001 ASUS A7N266VM 00000.04096) @ 0x00000000 ACPI: BIOS passes blacklist ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 Pentium(tm) Pro APIC version 16 ACPI: LAPIC_NMI (acpi_id[0x00] polarity[0x1] trigger[0x1] lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0]) IOAPIC[0]: Assigned apic_id 2 IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, IRQ 0-23 ACPI: INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x0] trigger[0x1]) ACPI: INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x9] polarity[0x1] trigger[0x3]) Using ACPI (MADT) for SMP configuration information Kernel command line: BOOT_IMAGE=linux ro root=303 Initializing CPU#0 Detected 1670.481 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 3335.78 BogoMIPS Memory: 224412k/229296k available (1101k kernel code, 4372k reserved, 469k data, 92k init, 0k highmem) Dentry cache hash table entries: 32768 (order: 6, 262144 bytes) Inode cache hash table entries: 16384 (order: 5, 131072 bytes) Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes) Page-cache hash table entries: 65536 (order: 6, 262144 bytes) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0383fbff c1c3fbff 00000000 00000000 CPU: Common caps: 0383fbff c1c3fbff 00000000 00000000 CPU: AMD Athlon(TM) XP 2000+ stepping 02 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 ENABLING IO-APIC IRQs init IO_APIC IRQs IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected. ..TIMER: vector=0x31 pin1=2 pin2=0 ..MP-BIOS bug: 8254 timer not connected to IO-APIC ...trying to set up timer (IRQ0) through the 8259A ... ..... (found pin 0) ...works. number of MP IRQ sources: 16. number of IO-APIC #2 registers: 24. testing the IO APIC....................... IO APIC #2...... .... register #00: 02000000 ....... : physical APIC id: 02 .... register #01: 00170011 ....... : max redirection entries: 0017 ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 00000000 ....... : arbitration: 00 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 001 01 0 0 0 0 0 1 1 31 01 001 01 0 0 0 0 0 1 1 39 02 000 00 1 0 0 0 0 0 0 00 03 001 01 0 0 0 0 0 1 1 41 04 001 01 0 0 0 0 0 1 1 49 05 001 01 0 0 0 0 0 1 1 51 06 001 01 0 0 0 0 0 1 1 59 07 001 01 0 0 0 0 0 1 1 61 08 001 01 0 0 0 0 0 1 1 69 09 001 01 1 1 0 0 0 1 1 71 0a 001 01 0 0 0 0 0 1 1 79 0b 001 01 0 0 0 0 0 1 1 81 0c 001 01 0 0 0 0 0 1 1 89 0d 001 01 0 0 0 0 0 1 1 91 0e 001 01 0 0 0 0 0 1 1 99 0f 001 01 0 0 0 0 0 1 1 A1 10 000 00 1 0 0 0 0 0 0 00 11 000 00 1 0 0 0 0 0 0 00 12 000 00 1 0 0 0 0 0 0 00 13 000 00 1 0 0 0 0 0 0 00 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:0 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1670.4808 MHz. ..... host bus clock speed is 267.2768 MHz. cpu: 0, clocks: 2672768, slice: 1336384 CPU0 mtrr: v1.40 (20010327) Richard Gooch (rgooch-r1x6VkxMR+00zabcByZE4g@public.gmane.org) mtrr: detected mtrr type: Intel ACPI: Subsystem revision 20021212 PCI: PCI BIOS revision 2.10 entry at 0xf1b20, last bus=2 PCI: Using configuration type 1 tbxface-0099 [03] Acpi_load_tables : ACPI Tables successfully acquired Parsing all Control Methods:.......................................................................................................................................................... Table [DSDT] - 410 Objects with 53 Devices 154 Methods 12 Regions ACPI Namespace successfully loaded at root c02b679c evxfevnt-0074 [04] Acpi_enable : Transition to ACPI mode successful evgpe-0259: *** Info: GPE Block0 defined as GPE0 to GPE15 evgpe-0259: *** Info: GPE Block1 defined as GPE16 to GPE47 Executing all Device _STA and_INI methods:..................................................... 53 Devices found containing: 53 _STA, 0 _INI methods Completing Region/Field/Buffer/Package initialization:.................................. Initialized 8/12 Regions 0/0 Fields 15/15 Buffers 11/11 Packages (410 nodes) ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: System [ACPI] (supports S0 S1 S4 S5) ACPI: PCI Interrupt Link [LNKA] (IRQs 16 18, enabled at IRQ 5) ACPI: PCI Interrupt Link [LNKB] (IRQs 16 18, disabled) ACPI: PCI Interrupt Link [LNKC] (IRQs 16 18, disabled) ACPI: PCI Interrupt Link [LNKD] (IRQs 16 18, disabled) ACPI: PCI Interrupt Link [LNKE] (IRQs 19, enabled at IRQ 11) ACPI: PCI Interrupt Link [LNKF] (IRQs 20 21 22, enabled at IRQ 5) ACPI: PCI Interrupt Link [LNKU] (IRQs 20 21 22, enabled at IRQ 10) ACPI: PCI Interrupt Link [LNKI] (IRQs 20 21 22, disabled) ACPI: PCI Interrupt Link [LNKJ] (IRQs 20 21 22, enabled at IRQ 5) ACPI: PCI Interrupt Link [LNKK] (IRQs 20 21 22, enabled at IRQ 11) ACPI: PCI Interrupt Link [LNKM] (IRQs 20 21 22, disabled) ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT] pci_bind-0191 [05] acpi_pci_bind : Device 00:00:04.00 not present in PCI namespace PCI: Probing PCI hardware dsopcode-0495 [14] Ds_init_buffer_field : Field size 56 exceeds Buffer size 48 (bits) psparse-1102: *** Error: Method execution failed [\_SB_.SRS_] (Node cdf6e1e8), AE_AML_BUFFER_LIMIT psparse-1102: *** Error: Method execution failed [\_SB_.LNKB._SRS] (Node cdf6eee8), AE_AML_BUFFER_LIMIT pci_link-0316 [03] acpi_pci_link_set : Error evaluating _SRS ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 0 dsopcode-0495 [14] Ds_init_buffer_field : Field size 56 exceeds Buffer size 48 (bits) psparse-1102: *** Error: Method execution failed [\_SB_.SRS_] (Node cdf6e1e8), AE_AML_BUFFER_LIMIT psparse-1102: *** Error: Method execution failed [\_SB_.LNKC._SRS] (Node cdf6d668), AE_AML_BUFFER_LIMIT pci_link-0316 [03] acpi_pci_link_set : Error evaluating _SRS ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 0 dsopcode-0495 [14] Ds_init_buffer_field : Field size 56 exceeds Buffer size 48 (bits) psparse-1102: *** Error: Method execution failed [\_SB_.SRS_] (Node cdf6e1e8), AE_AML_BUFFER_LIMIT psparse-1102: *** Error: Method execution failed [\_SB_.LNKD._SRS] (Node cdf6dce8), AE_AML_BUFFER_LIMIT pci_link-0316 [03] acpi_pci_link_set : Error evaluating _SRS ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 0 dsopcode-0495 [14] Ds_init_buffer_field : Field size 56 exceeds Buffer size 48 (bits) psparse-1102: *** Error: Method execution failed [\_SB_.SRS_] (Node cdf6e1e8), AE_AML_BUFFER_LIMIT psparse-1102: *** Error: Method execution failed [\_SB_.LNKI._SRS] (Node cdf6b8e8), AE_AML_BUFFER_LIMIT pci_link-0316 [03] acpi_pci_link_set : Error evaluating _SRS ACPI: PCI Interrupt Link [LNKI] enabled at IRQ 0 dsopcode-0495 [14] Ds_init_buffer_field : Field size 56 exceeds Buffer size 48 (bits) psparse-1102: *** Error: Method execution failed [\_SB_.SRS_] (Node cdf6e1e8), AE_AML_BUFFER_LIMIT psparse-1102: *** Error: Method execution failed [\_SB_.LNKM._SRS] (Node cdf6ad68), AE_AML_BUFFER_LIMIT pci_link-0316 [03] acpi_pci_link_set : Error evaluating _SRS ACPI: PCI Interrupt Link [LNKM] enabled at IRQ 0 PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PCI_IDE: unknown IDE controller on PCI bus 00 device 48, VID=10de, DID=01bc PCI_IDE: chipset revision 195 PCI_IDE: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xb800-0xb807, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xb808-0xb80f, BIOS settings: hdc:DMA, hdd:pio hda: SAMSUNG SV4002H, ATA DISK drive hdc: ASUS DVD-ROM E612, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: 78242976 sectors (40060 MB) w/2048KiB Cache, CHS=4870/255/63 hdc: ATAPI 40X DVD-ROM drive, 640kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.12 Partition check: hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 > Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 usb.c: registered new driver hub NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 32768) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 92k freed Real Time Clock Driver v1.10e Adding Swap: 136512k swap-space (priority -1) Intel 810 + AC97 Audio, version 0.21, 17:21:26 Jan 2 2003 PCI: Enabling device 00:06.0 (0005 -> 0007) PCI: Setting latency timer of device 00:06.0 to 64 i810: NVIDIA nForce Audio found at IO 0xe000 and 0xe100, IRQ 11 i810_audio: Audio Controller supports 6 channels. ac97_codec: AC97 Audio codec, id: ALG32(ALC650) i810_audio: AC'97 codec 0 supports AMAP, total channels = 6 MSDOS FS: IO charset iso8859-1 MSDOS FS: Using codepage 850 MSDOS FS: IO charset iso8859-1 MSDOS FS: Using codepage 850 MSDOS FS: IO charset iso8859-1 MSDOS FS: Using codepage 850 EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended blk: queue c02ce6e4, I/O limit 4095Mb (mask 0xffffffff) i2c-core.o: i2c core module version 2.6.5 (20020915) i2c-amd756.o version 2.6.5 (20020915) i2c-amd756.o: Found nVidia nForce SMBus controller. i2c-amd756.o: nVidia nForce bus detected and initialized i2c-proc.o version 2.6.5 (20020915) w83781d.o version 2.6.5 (20020915)