From: Arndt Schoenewald <abs-SA7OhAOe25xnNxvc45mVi0K323yFvGpRdefyYXQ/eNw@public.gmane.org>
To: Martin Siegert <siegert-z1KUqvL5UUQ@public.gmane.org>
Cc: acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
Subject: Re: ACPI problems on Athlon MP system
Date: Fri, 10 Jan 2003 11:37:07 +0100 [thread overview]
Message-ID: <20030110103707.GA12313@digda.intern.quelltext.com> (raw)
In-Reply-To: <20030110030741.GA2580-0ze2hujOWYhqr3d4nwidZ7Dks+cytr/Z@public.gmane.org>
Hi Martin,
the ACPI support in the 2.4 kernel series is very old (from autumn
2001 if I remember correctly), so you should use the ACPI patch from
http://sourceforge.net/projects/acpi; in your case
http://prdownloads.sf.net/acpi/acpi-20021212-2.4.20.diff.gz
(This patch applies cleanly against linux-2.4.21-pre2 from kernel.org
even though it was done for 2.4.20.)
The Intel people are trying to get an updated ACPI version into 2.4,
but I guess this will not happen before 2.4.22. The 2.5 kernel series
does already include a current ACPI version.
Good luck,
Arndt
On Thu, Jan 09, 2003 at 07:07:41PM -0800, Martin Siegert wrote:
> Hi,
>
> I am not sure whether this is the correct place to ask this question,
> but hopefully you can point me in the right direction.
>
> Here is the problem:
> I am trying to get the "poweroff" command working on an Athlon MP
> (Tyan S2462) system (linux-2.4.21-pre2; otherwise RedHat 7.3).
>
> The machine has ACPI enabled in the bios. When I compile the kernel
> with ACPI disabled, the poweroff command shuts down the system, but
> does not shut off the power (it acts exactly like the halt command).
> In order to shutoff the machine I must press the power switch.
>
> When I compile the kernel with ACPI enabled the situation is worse:
> the halt and poweroff commands still work in exactly the same way
> (shutdown the system), but now I cannot switch off the machine
> anymore: pressing the power switch has absolutely no effect
> (regardless of how long I hold the switch). The only way to
> switch off the machine is to either pull the power cord or to
> press the reset button on then the power switch (which will then
> switch off the machine when it reboots).
>
> What am I doing wrong? Am I missing some kernel switches, options?
> Do I need additional software?
>
> Any help or suggestions, hints are appreciated!
>
> Thanks in advance,
>
> Martin
--
Arndt Schoenewald <abs-SA7OhAOe25xnNxvc45mVi0K323yFvGpRdefyYXQ/eNw@public.gmane.org>, Software Developer
Quelltext AG (http://www.quelltext-ag.de), Dortmund, Germany
-------------------------------------------------------
This SF.NET email is sponsored by:
SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See!
http://www.vasoftware.com
next prev parent reply other threads:[~2003-01-10 10:37 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-01-10 3:07 ACPI problems on Athlon MP system Martin Siegert
[not found] ` <20030110030741.GA2580-0ze2hujOWYhqr3d4nwidZ7Dks+cytr/Z@public.gmane.org>
2003-01-10 10:31 ` Pavel Machek
2003-01-10 10:37 ` Arndt Schoenewald [this message]
[not found] ` <20030110103707.GA12313-XEk0yrNnxERrk9EDFsdIuomMxnTEL9wi0E9HWUfgJXw@public.gmane.org>
2003-01-10 10:59 ` DSDT for Compaq Presario 1720US Prabhakar Reddy Gudla Venkata Siva
2003-01-15 3:36 ` ACPI problems on Athlon MP system Martin Siegert
[not found] ` <20030115033643.GA29848-0ze2hujOWYhqr3d4nwidZ7Dks+cytr/Z@public.gmane.org>
2003-01-15 9:45 ` Arndt Schoenewald
2003-01-10 12:46 ` Ducrot Bruno
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20030110103707.GA12313@digda.intern.quelltext.com \
--to=abs-sa7ohaoe25xnnxvc45mvi0k323yfvgprdefyyxq/enw@public.gmane.org \
--cc=acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
--cc=siegert-z1KUqvL5UUQ@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox