Linux version 2.4.21-pre3 (root@jonas) (gcc version 3.2.1 20021207 (Gentoo Linux 3.2.1-20021207)) #8 Mon Jan 20 14:57:21 CET 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000002ff60000 (usable) BIOS-e820: 000000002ff60000 - 000000002ff7a000 (ACPI data) BIOS-e820: 000000002ff7a000 - 000000002ff7c000 (ACPI NVS) BIOS-e820: 000000002ff7c000 - 0000000030000000 (reserved) BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) 767MB LOWMEM available. ACPI: have wakeup address 0xc0001000 On node 0 totalpages: 196448 zone(0): 4096 pages. zone(1): 192352 pages. zone(2): 0 pages. ACPI: RSDP (v002 IBM ) @ 0x000f7060 ACPI: XSDT (v001 IBM TP-1G 00000.04176) @ 0x2ff6ee44 ACPI: FADT (v001 IBM TP-1G 00000.04176) @ 0x2ff6ee88 ACPI: SSDT (v001 IBM TP-1G 00000.04176) @ 0x2ff6ef3c ACPI: ECDT (v001 IBM TP-1G 00000.04176) @ 0x2ff79f87 ACPI: BOOT (v001 IBM TP-1G 00000.04176) @ 0x2ff79fd8 ACPI: DSDT (v001 IBM TP-1G 00000.04176) @ 0x00000000 ACPI: BIOS passes blacklist IBM machine detected. Enabling interrupts during APM calls. Kernel command line: root=/dev/hda3 Initializing CPU#0 Detected 1199.021 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 2392.06 BogoMIPS Memory: 774260k/785792k available (1785k kernel code, 11144k reserved, 583k data, 76k init, 0k highmem) Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode cache hash table entries: 65536 (order: 7, 524288 bytes) Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) Buffer-cache hash table entries: 65536 (order: 6, 262144 bytes) Page-cache hash table entries: 262144 (order: 8, 1048576 bytes) CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 3febf9ff 00000000 00000000 00000000 CPU: Common caps: 3febf9ff 00000000 00000000 00000000 CPU: Intel(R) Pentium(R) 4 Mobile CPU 1.80GHz stepping 04 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX ACPI: Subsystem revision 20030109 PCI: PCI BIOS revision 2.10 entry at 0xfd8fe, last bus=8 PCI: Using configuration type 1 tbxface-0098 [03] acpi_load_tables : ACPI Tables successfully acquired Parsing all Control Methods:......................................................................................................................................................................................................................................................................................................................................................................................................... Table [DSDT] - 1276 Objects with 64 Devices 393 Methods 18 Regions Parsing all Control Methods: Table [SSDT] - 0 Objects with 0 Devices 0 Methods 0 Regions ACPI Namespace successfully loaded at root c037761c evxfevnt-0073 [04] acpi_enable : Transition to ACPI mode successful evgpe-0262: *** Info: GPE Block0 defined as GPE0 to GPE15 evgpe-0262: *** Info: GPE Block1 defined as GPE16 to GPE31 ACPI: Found ECDT ACPI: Could not use ECDT evxfevnt-0118 [06] acpi_disable : ACPI mode disabled utalloc-0967 [05] ut_dump_allocations : No outstanding allocations. PCI: Probing PCI hardware PCI: ACPI tables contain no PCI IRQ routing entries PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 00:1f.1 Transparent bridge - Intel Corp. 82801BAM/CAM PCI Bridge PCI: Discovered primary peer bus 09 [IRQ] PCI: Using IRQ router PIIX [8086/248c] at 00:1f.0 PCI: Found IRQ 11 for device 00:1f.1 PCI: Sharing IRQ 11 with 00:1d.2 PCI: Sharing IRQ 11 with 02:02.0 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd devfs: v1.12c (20020818) Richard Gooch (rgooch-r1x6VkxMR+00zabcByZE4g@public.gmane.org) devfs: boot_options: 0x1 Installing knfsd (copyright (C) 1996 okir-pn4DOG8n3UYbFoVRYvo4fw@public.gmane.org). pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS01 at 0x02f8 (irq = 3) is a 16550A PCI: Found IRQ 11 for device 00:1f.6 PCI: Sharing IRQ 11 with 00:1f.3 PCI: Sharing IRQ 11 with 00:1f.5 PCI: Sharing IRQ 11 with 02:00.1 eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin and others PCI: Found IRQ 11 for device 02:08.0 eth0: Intel Corp. 82801CAM (ICH3) PRO/100 VE (LOM) Ethernet Controller, 00:D0:59:CF:10:21, IRQ 11. Board assembly 000000-000, Physical connectors present: RJ45 Primary interface chip i82555 PHY #1. General self-test: passed. Serial sub-system self-test: passed. Internal registers self-test: passed. ROM checksum self-test: passed (0x04f4518b). Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 690M agpgart: Detected Intel i845 chipset agpgart: AGP aperture is 64M @ 0xe0000000 [drm] Initialized tdfx 1.0.0 20010216 on minor 0 [drm] AGP 0.99 on Intel i845 @ 0xe0000000 64MB [drm] Initialized radeon 1.1.1 20010405 on minor 1 [drm] AGP 0.99 on Intel i845 @ 0xe0000000 64MB [drm] Initialized i810 1.2.0 20010920 on minor 2 Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH3M: IDE controller at PCI slot 00:1f.1 PCI: Enabling device 00:1f.1 (0005 -> 0007) PCI: Found IRQ 11 for device 00:1f.1 PCI: Sharing IRQ 11 with 00:1d.2 PCI: Sharing IRQ 11 with 02:02.0 ICH3M: chipset revision 2 ICH3M: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:DMA, hdd:pio hda: IC25N040ATCS04-0, ATA DISK drive blk: queue c038db80, I/O limit 4095Mb (mask 0xffffffff) hdc: DW-28E, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: host protected area => 1 hda: 78140160 sectors (40008 MB) w/1768KiB Cache, CHS=5168/240/63, UDMA(100) hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 1658kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.12 Partition check: /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 Linux Kernel Card Services 3.1.22 options: [pci] [cardbus] [pm] PCI: Found IRQ 11 for device 02:00.0 PCI: Sharing IRQ 11 with 00:1d.0 PCI: Sharing IRQ 11 with 01:00.0 PCI: Found IRQ 11 for device 02:00.1 PCI: Sharing IRQ 11 with 00:1f.3 PCI: Sharing IRQ 11 with 00:1f.5 PCI: Sharing IRQ 11 with 00:1f.6 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 8192 buckets, 64Kbytes TCP: Hash tables configured (established 262144 bind 65536) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. Yenta IRQ list 04b8, PCI irq11 Socket status: 30000006 Yenta IRQ list 04b8, PCI irq11 Socket status: 30000006 reiserfs: checking transaction log (device 03:03) ... Using r5 hash to sort names ReiserFS version 3.6.25 VFS: Mounted root (reiserfs filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 76k freed Adding Swap: 1028152k swap-space (priority -1)