Linux version 2.5.59 (root@asparagine) (gcc version 3.2.2 20030129 (Debian prerelease)) #2 Wed Feb 5 01:52:04 GMT 2003 Video mode to be used for restore is f00 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000bff0000 (usable) BIOS-e820: 000000000bff0000 - 000000000bfffc00 (ACPI data) BIOS-e820: 000000000bfffc00 - 000000000c000000 (ACPI NVS) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 191MB LOWMEM available. ACPI: have wakeup address 0xc0001000 On node 0 totalpages: 49136 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 45040 pages, LIFO batch:10 HighMem zone: 0 pages, LIFO batch:1 ACPI: RSDP (v000 PTLTD ) @ 0x000f6c80 ACPI: RSDT (v001 PTLTD RSDT 01540.00000) @ 0x0bffc972 ACPI: FADT (v001 IBM TP240 01540.00000) @ 0x0bfffb65 ACPI: BOOT (v001 PTLTD $SBFTBL$ 01540.00000) @ 0x0bfffbd9 ACPI: DSDT (v001 PTL BX-TJ 01540.00000) @ 0x00000000 ACPI: BIOS passes blacklist IBM machine detected. Enabling interrupts during APM calls. IBM machine detected. Disabling SMBus accesses. Building zonelist for node : 0 Kernel command line: auto BOOT_IMAGE=Linux ro root=306 video=vesa resume=/dev/hda5 reboot=w Initializing CPU#0 PID hash table entries: 1024 (order 10: 8192 bytes) Detected 497.735 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 985.08 BogoMIPS Memory: 190788k/196544k available (2134k kernel code, 5120k reserved, 659k data, 128k init, 0k highmem) Security Scaffold v1.0.0 initialized Dentry cache hash table entries: 32768 (order: 6, 262144 bytes) Inode-cache hash table entries: 16384 (order: 5, 131072 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) -> /dev -> /dev/console -> /root CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: Intel Pentium III (Coppermine) stepping 06 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket mtrr: v2.0 (20020519) EISA bus registered EISA: Probing bus... EISA: Detected 0 card. PCI: PCI BIOS revision 2.10 entry at 0xfd9df, last bus=0 PCI: Using configuration type 1 BIO: pool of 256 setup, 14Kb (56 bytes/bio) biovec pool[0]: 1 bvecs: 256 entries (12 bytes) biovec pool[1]: 4 bvecs: 256 entries (48 bytes) biovec pool[2]: 16 bvecs: 256 entries (192 bytes) biovec pool[3]: 64 bvecs: 256 entries (768 bytes) biovec pool[4]: 128 bvecs: 256 entries (1536 bytes) biovec pool[5]: 256 bvecs: 256 entries (3072 bytes) ACPI: Subsystem revision 20030122 ACPI-0262: *** Info: GPE Block0 defined as GPE0 to GPE15 ACPI-0262: *** Info: GPE Block1 defined as GPE16 to GPE31 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: (supports S0 S1 S3 S4 S4bios S5) ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 14 15, disabled) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 14 15) ACPI: Embedded Controller [EC0] (gpe 25) ACPI: Power Resource [PCR0] (off) ACPI: Power Resource [PFAN] (off) Linux Plug and Play Support v0.94 (c) Adam Belay pnp: Enabling Plug and Play Card Services. PnPBIOS: Found PnP BIOS installation structure at 0xc00f6d20 PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xac81, dseg 0x400 PnPBIOS: 19 nodes reported by PnP BIOS; 19 recorded by driver isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found block request queues: 128 requests per read queue 128 requests per write queue 8 requests per batch enter congestion at 15 exit congestion at 17 drivers/usb/core/usb.c: registered new driver usbfs drivers/usb/core/usb.c: registered new driver hub ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 ACPI: No IRQ known for interrupt pin A of device 00:09.0 - using IRQ 255 PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' SBF: ACPI BOOT descriptor is wrong length (39) SBF: Simple Boot Flag extension found and enabled. SBF: Setting boot flags 0x1 IA-32 Microcode Update Driver: v1.11 Enabling SEP on CPU 0 aio_setup: sizeof(struct page) = 40 Journalled Block Device driver loaded devfs: v1.22 (20021013) Richard Gooch (rgooch-r1x6VkxMR+00zabcByZE4g@public.gmane.org) devfs: boot_options: 0x0 Capability LSM initialized Initializing Cryptographic API ACPI: AC Adapter [ACAD] (on-line) ACPI: Battery Slot [BAT1] (battery present) ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (CM) [SBTN] ACPI: Lid Switch [LID] ACPI: Fan [FAN] (off) ACPI: Processor [CPU0] (supports C1 C2 C3, 8 throttling states) ACPI: Thermal Zone [THRM] (31 C) Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing enabled tts/0 at I/O 0x3f8 (irq = 4) is a 16550A tts/1 at I/O 0x2f8 (irq = 3) is a 16550A Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 loop: loaded (max 8 devices) Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller at PCI slot 00:07.1 PIIX4: chipset revision 0 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1420-0x1427, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1428-0x142f, BIOS settings: hdc:pio, hdd:pio hda: IBM-DARA-212000, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: host protected area => 1 hda: 23579136 sectors (12073 MB) w/418KiB Cache, CHS=23392/16/63, UDMA(33) /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 p6 p7 > Linux Kernel Card Services 3.1.22 options: [pci] [cardbus] [pm] mice: PS/2 mouse device common for all mice input: PC Speaker input: PS/2 Generic Mouse on isa0060/serio1 serio: i8042 AUX port at 0x60,0x64 irq 12 input: AT Set 2 keyboard on isa0060/serio0 serio: i8042 KBD port at 0x60,0x64 irq 1 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Advanced Linux Sound Architecture Driver Version 0.9.0rc6 (Tue Dec 17 19:01:13 2002 UTC). request_module[snd-card-0]: not ready request_module[snd-card-1]: not ready request_module[snd-card-2]: not ready request_module[snd-card-3]: not ready request_module[snd-card-4]: not ready request_module[snd-card-5]: not ready request_module[snd-card-6]: not ready request_module[snd-card-7]: not ready ALSA device list: No soundcards found. NET4: Linux TCP/IP 1.0 for NET4.0 IP: routing cache hash table of 1024 buckets, 8Kbytes TCP: Hash tables configured (established 16384 bind 32768) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. BIOS EDD facility v0.07 2002-Oct-24, 1 devices found Yenta IRQ list 0098, PCI irq11 Socket status: 30000010 Resume Machine: resuming from /dev/hda5 Resuming from device ide0(3,5) Resume Machine: This is normal swap space EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: ide0(3,6): orphan cleanup on readonly fs ext3_orphan_cleanup: deleting unreferenced inode 179955 EXT3-fs: ide0(3,6): 1 orphan inode deleted EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 128k freed Adding 409616k swap on /dev/hda5. Priority:-1 extents:1 EXT3 FS 2.4-0.9.16, 02 Dec 2001 on ide0(3,6), internal journal Real Time Clock Driver v1.11 warning: process `update' used the obsolete bdflush system call Fix your initscripts? cs4281: version v1.13.32 time 01:56:51 Feb 5 2003 drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.0 uhci-hcd 00:07.2: Intel Corp. 82440MX USB Universa uhci-hcd 00:07.2: irq 11, io base 00001400 Please use the 'usbfs' filetype instead, the 'usbdevfs' name is deprecated. uhci-hcd 00:07.2: new USB bus registered, assigned bus number 1 hub 1-0:0: USB hub found hub 1-0:0: 2 ports detected ttyS2: LSR safety check engaged! ttyS2: LSR safety check engaged! cs: IO port probe 0x0c00-0x0cff: clean. cs: IO port probe 0x0800-0x08ff: clean. cs: IO port probe 0x0100-0x04ff: excluding 0x398-0x39f 0x3b8-0x3df 0x4d0-0x4d7 cs: IO port probe 0x0a00-0x0aff: clean. cs: memory probe 0xa0000000-0xa0ffffff: clean. hermes.c: 4 Jul 2002 David Gibson orinoco.c 0.13a (David Gibson and others) orinoco_cs.c 0.13a (David Gibson and others) eth0: Station identity 001f:0004:0001:0003 eth0: Looks like an Intersil firmware version 1.3.4 eth0: Ad-hoc demo mode supported eth0: IEEE standard IBSS ad-hoc mode supported eth0: WEP supported, 104-bit key eth0: MAC address 00:60:B3:68:A4:47 eth0: Station name "Prism I" eth0: ready eth0: index 0x01: Vcc 5.0, irq 3, io 0x0100-0x013f eth0: New link status: Connected (0001) Module cs4281 cannot be unloaded due to unsafe usage in include/linux/module.h:430