Re: ACPI + IO-APIC power off by button problems

[dbenham-FG1iuTdj8bisTnJN9+BGXg@public.gmane.org]

Have you configured acpid?  You mention kernel and ACPI patch but
nothing about the daemon...

On Sun, Mar 02, 2003 at 07:53:46PM +0100, AnonimoVeneziano wrote:
> Hi, I have this configuration:
> 
> MSI KT4 Ultra MoBo
> Athlon XP 2400+
> Matrox G450
> 
> and this problem: with kernel 2.4.20 and without ACPI patch installed 
> and IO-APIC support activated the system does not shutdown properly, and 
> it reboots instead of turn off and if I try to turn off the PC by 
> pressing the power off button it does nothing, as if I've never pressed it
> 
> Using instead the kernel 2.4.21-pre4 + lastest ACPI patch I've solved 
> the power down issue , and now the system shutdown properly , but the 
> button does not work again . Without IO-APIC the button works correctly. 
> There are some incompatibilities between the PowerButton and the IO-APIC?
> 
> I've noticed this problem in my old mobo too, an ASUS CUV4X-EA
> 
> Thanks
> 
> Bye
> 
> 
> 
> -------------------------------------------------------
> This sf.net email is sponsored by:ThinkGeek
> Welcome to geek heaven.
> http://thinkgeek.com/sf
> _______________________________________________
> Acpi-devel mailing list
> Acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
> https://lists.sourceforge.net/lists/listinfo/acpi-devel


-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf