Re: presario 1505us battery not found

[Abheek Anand <abheek-VX+DGZyGJwM3uPMLIKxrzw@public.gmane.org>]

Yes I tried doing that as well but the battery still doesnt show up.

Regards,
Abheek

On (04/25/03 15:53), Richard Black wrote:
> Have you tried booting with no AC power connected?
> 
> Sincerely,
> Richard Black
> 
> Abheek Anand wrote:
> 
> >Hi,
> >
> >After quite a bit of tinkering with my presario 1505us, I managed to get 
> >most
> >of what I need up and working. Currently im using linux 2.5.67 with
> >acpi-20030328. I am able to get ac-adaptor information, and the LID works
> >fine. However, I am unable to get acpi to recognize my battery, which it
> >always shows as absent. I have looked at several people's suggestions on 
> >this
> >on the mailing list, but none of them work for me.
> >
> >I'm including a copy of the dmesg messages my system spews out. I also did 
> >the
> >usual dsdt disassemble, fix, and include in kernel routine. I have put up 
> >my
> >original (and fixed) dsdt on http://www.cs.umd.edu/~abheek/acpi . My
> >/proc/acpi/battery/BAT1 entries show the battery as absent.
> >
> >Any help would be _very_ appreciated.
> >
> >Thanks,
> >Abheek
> >
> >
> >----- dmesg <snip> ----
> >
> >Linux version 2.5.67 (root-c5qLw1b7B3dFcdTHL1IdjYdd74u8MsAO@public.gmane.org) (gcc version 3.2.2 20030222 
> >(Red Hat Linux 3.2.2-5)) #6 Thu Apr 24 13:45:50 EDT 2003
> >Video mode to be used for restore is ffff
> >BIOS-provided physical RAM map:
> >BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> >BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> >BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> >BIOS-e820: 0000000000100000 - 000000000ffd0000 (usable)
> >BIOS-e820: 000000000ffd0000 - 000000000fff0c00 (reserved)
> >BIOS-e820: 000000000fff0c00 - 000000000fffc000 (ACPI NVS)
> >BIOS-e820: 000000000fffc000 - 0000000010000000 (reserved)
> >255MB LOWMEM available.
> >On node 0 totalpages: 65488
> > DMA zone: 4096 pages, LIFO batch:1
> > Normal zone: 61392 pages, LIFO batch:14
> > HighMem zone: 0 pages, LIFO batch:1
> >ACPI: RSDP (v000 COMPAQ                     ) @ 0x000f9970
> >ACPI: RSDT (v001 COMPAQ CPQ004A  09478.00544) @ 0x0fff0c84
> >ACPI: FADT (v002 COMPAQ CPQ004A  00000.00002) @ 0x0fff0c00
> >ACPI: SSDT (v001 COMPAQ CPQCrP4C 00000.04097) @ 0x0fff6637
> >ACPI: DSDT (v001 COMPAQ  EVON800 00001.00000) @ 0x00000000
> >ACPI: BIOS passes blacklist
> >Building zonelist for node : 0
> >Kernel command line: ro root=/dev/hda3 hdc=ide-scsi pci=noacpi
> >ide_setup: hdc=ide-scsi
> >Initializing CPU#0
> >PID hash table entries: 1024 (order 10: 8192 bytes)
> >Detected 1594.399 MHz processor.
> >Console: colour VGA+ 80x25
> >Calibrating delay loop... 3145.72 BogoMIPS
> >Memory: 254948k/261952k available (2392k kernel code, 6292k reserved, 963k 
> >data, 132k init, 0k highmem)
> >Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
> >Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
> >Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
> >-> /dev
> >-> /dev/console
> >-> /root
> >CPU: Trace cache: 12K uops, L1 D cache: 8K
> >CPU: L2 cache: 512K
> >CPU:     After generic, caps: 3febf9ff 00000000 00000000 00000000
> >Intel machine check architecture supported.
> >Intel machine check reporting enabled on CPU#0.
> >CPU#0: Intel P4/Xeon Extended MCE MSRs (12) available
> >CPU: Intel(R) Pentium(R) 4 CPU 1.60GHz stepping 04
> >Enabling fast FPU save and restore... done.
> >Enabling unmasked SIMD FPU exception support... done.
> >Checking 'hlt' instruction... OK.
> >POSIX conformance testing by UNIFIX
> >Initializing RT netlink socket
> >mtrr: v2.0 (20020519)
> >PCI: BIOS32 entry (0xc00f0000) in high memory, cannot use.
> >PCI: Using configuration type 1
> >BIO: pool of 256 setup, 15Kb (60 bytes/bio)
> >biovec pool[0]:   1 bvecs: 256 entries (12 bytes)
> >biovec pool[1]:   4 bvecs: 256 entries (48 bytes)
> >biovec pool[2]:  16 bvecs: 256 entries (192 bytes)
> >biovec pool[3]:  64 bvecs: 256 entries (768 bytes)
> >biovec pool[4]: 128 bvecs: 256 entries (1536 bytes)
> >biovec pool[5]: 256 bvecs: 256 entries (3072 bytes)
> >ACPI: Subsystem revision 20030328
> >  tbget-0292: *** Info: Table [DSDT] replaced by host OS
> >tbxface-0117 [03] acpi_load_tables      : ACPI Tables successfully acquired
> >Parsing all Control 
> >Methods:...................................................................................................................................................................................................................................................
> >Table [DSDT] - 784 Objects with 88 Devices 243 Methods 24 Regions
> >Parsing all Control Methods:
> >Table [SSDT] - 0 Objects with 0 Devices 0 Methods 0 Regions
> >ACPI Namespace successfully loaded at root c04795dc
> >evxfevnt-0093 [04] acpi_enable           : Transition to ACPI mode 
> >successful
> >evgpeblk-0731 [06] ev_create_gpe_block   : GPE Block: [_GPE] 2 registers 
> >at 0000000000001028 on interrupt 9
> >evgpeblk-0736 [06] ev_create_gpe_block   : GPE Block defined as GPE 0x00 
> >to GPE 0x0F
> >evgpeblk-0262 [07] ev_save_method_info   : Registered GPE method _L0B as 
> >GPE number 0x0B
> >evgpeblk-0731 [06] ev_create_gpe_block   : GPE Block: [_GPE] 2 registers 
> >at 000000000000102C on interrupt 9
> >evgpeblk-0736 [06] ev_create_gpe_block   : GPE Block defined as GPE 0x10 
> >to GPE 0x1F
> >evgpeblk-0262 [07] ev_save_method_info   : Registered GPE method _L11 as 
> >GPE number 0x11
> >evgpeblk-0262 [07] ev_save_method_info   : Registered GPE method _L13 as 
> >GPE number 0x13
> >evgpeblk-0262 [07] ev_save_method_info   : Registered GPE method _L14 as 
> >GPE number 0x14
> >evgpeblk-0262 [07] ev_save_method_info   : Registered GPE method _L15 as 
> >GPE number 0x15
> >evgpeblk-0262 [07] ev_save_method_info   : Registered GPE method _L17 as 
> >GPE number 0x17
> >evgpeblk-0262 [07] ev_save_method_info   : Registered GPE method _L18 as 
> >GPE number 0x18
> >evgpeblk-0262 [07] ev_save_method_info   : Registered GPE method _L1C as 
> >GPE number 0x1C
> >Executing all Device _STA and_INI methods:...evrgnini-0261: *** Error: 
> >Could not install pci_config handler for C03B, AE_ALREADY_EXISTS
> >....evrgnini-0261: *** Error: Could not install pci_config handler for 
> >C03B, AE_ALREADY_EXISTS
> >....................evregion-0254 [22] ev_address_space_dispa: no handler 
> >for region(cff6d3a8) [EmbeddedControl]
> >exfldio-0235 [21] ex_access_region      : Region EmbeddedControl(3) has no 
> >handler
> >evregion-0254 [22] ev_address_space_dispa: no handler for region(cff6d3a8) 
> >[EmbeddedControl]
> >exfldio-0235 [21] ex_access_region      : Region EmbeddedControl(3) has no 
> >handler
> >psparse-1121: *** Error: Method execution failed 
> >[\_SB_.C03B.C04E.C0CF.C0D3] (Node cff6c728), AE_NOT_EXIST
> >psparse-1121: *** Error: Method execution failed 
> >[\_SB_.C03B.C04E.C0CF._INI] (Node cff696a8), AE_NOT_EXIST
> > nsinit-0397 [06] ns_init_one_device    : \_SB_.C03B.C04E.C0CF._INI 
> > failed: AE_NOT_EXIST
> >.........................................evrgnini-0261: *** Error: Could 
> >not install pci_config handler for C03B, AE_ALREADY_EXISTS
> >.......................
> >91 Devices found containing: 91 _STA, 4 _INI methods
> >Completing Region/Field/Buffer/Package 
> >initialization:.................................................................................................
> >Initialized 14/24 Regions 0/0 Fields 25/26 Buffers 58/67 Packages (835 
> >nodes)
> >ACPI: Interpreter enabled
> >ACPI: Using PIC for interrupt routing
> >ACPI: PCI Root Bridge [C03B] (00:00)
> >PCI: Probing PCI hardware (bus 00)
> >Transparent bridge - Intel Corp. 82801BAM/CAM PCI Bri
> >ACPI: PCI Interrupt Routing Table [\_SB_.C03B._PRT]
> >ACPI: PCI Interrupt Routing Table [\_SB_.C03B.C03C._PRT]
> >ACPI: PCI Interrupt Routing Table [\_SB_.C03B.C04D._PRT]
> >ACPI: Embedded Controller [C0CF] (gpe 29)
> >ACPI: Power Resource [C142] (off)
> >ACPI: Power Resource [C156] (off)
> >ACPI: Power Resource [C15A] (off)
> >ACPI: Power Resource [C15E] (off)
> >ACPI: Power Resource [C167] (on)
> >ACPI: PCI Interrupt Link [C0B5] (IRQs 5 10 *11)
> >ACPI: PCI Interrupt Link [C0B6] (IRQs *5 10 11)
> >ACPI: PCI Interrupt Link [C0B7] (IRQs 5 10 *11)
> >ACPI: PCI Interrupt Link [C0B8] (IRQs 5 10 *11)
> >ACPI: PCI Interrupt Link [C0B9] (IRQs 5 *10 11)
> >pci_link-0110 [25] acpi_pci_link_check_po: Blank IRQ resource
> >ACPI: PCI Interrupt Link [C0BA] (IRQs, disabled)
> >pci_link-0110 [26] acpi_pci_link_check_po: Blank IRQ resource
> >ACPI: PCI Interrupt Link [C0BB] (IRQs, disabled)
> >pci_link-0110 [27] acpi_pci_link_check_po: Blank IRQ resource
> >ACPI: PCI Interrupt Link [C0BC] (IRQs, disabled)
> >ACPI: Power Resource [C0CE] (on)
> >ACPI: Power Resource [C1D3] (off)
> >ACPI: Power Resource [C1D4] (off)
> >ACPI: Power Resource [C1D5] (off)
> >ACPI: Power Resource [C1D6] (off)
> >ACPI: Power Resource [C1E1] (off)
> >ACPI: Power Resource [C1E2] (off)
> >ACPI: Power Resource [C1E3] (off)
> >Linux Plug and Play Support v0.96 (c) Adam Belay
> >PnPBIOS: Scanning system for PnP BIOS support...
> >PnPBIOS: Found PnP BIOS installation structure at 0xc00f2e20
> >PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x2e4e, dseg 0xf0000
> >PnPBIOS: 16 nodes reported by PnP BIOS; 16 recorded by driver
> >block request queues:
> >128 requests per read queue
> >128 requests per write queue
> >8 requests per batch
> >enter congestion at 15
> >exit congestion at 17
> >Linux Kernel Card Services 3.1.22
> > options:  [pci] [cardbus] [pm]
> >PCI: Probing PCI hardware
> >PCI: Using IRQ router PIIX [8086/248c] at 00:1f.0
> >cpufreq: Intel(R) SpeedStep(TM) for this processor not (yet) available.
> >cpufreq: P4/Xeon(TM) CPU On-Demand Clock Modulation available
> >Enabling SEP on CPU 0
> >Journalled Block Device driver loaded
> >Installing knfsd (copyright (C) 1996 okir-pn4DOG8n3UYbFoVRYvo4fw@public.gmane.org).
> >udf: registering filesystem
> >ACPI: AC Adapter [ACAD] (off-line)
> >ACPI: Battery Slot [BAT1] (battery absent)   
> >ACPI: Power Button (FF) [PWRF]
> >ACPI: Sleep Button (CM) [SLPB]
> >ACPI: Lid Switch [LID]
> >ACPI: Fan [C1D7] (off)
> >ACPI: Fan [C1D8] (off)
> >ACPI: Fan [C1D9] (off)
> >ACPI: Fan [C1DA] (off)
> >ACPI: Processor [C000] (supports C1 C2 C3, 8 throttling states)
> >[ACPI Debug] Integer: 0000000000000E62
> >[ACPI Debug] Integer: 0000000000000DFE
> >[ACPI Debug] Integer: 0000000000000D9A
> >[ACPI Debug] Integer: 0000000000000D36
> >[ACPI Debug] Integer: 0000000000000CD2
> >ACPI: Thermal Zone [TZ1] (32 C)
> >[ACPI Debug] Integer: 0000000000000DFE
> >[ACPI Debug] Integer: 0000000000000D68
> >[ACPI Debug] Integer: 0000000000000D04
> >[ACPI Debug] Integer: 0000000000000CA0
> >ACPI: Thermal Zone [TZ2] (28 C)
> >[ACPI Debug] Integer: 0000000000000CD2
> >ACPI: Thermal Zone [TZ3] (27 C)
> >
> >----- </snip> ------
> >
> >
> >-------------------------------------------------------
> >This sf.net email is sponsored by:ThinkGeek
> >Welcome to geek heaven.
> >http://thinkgeek.com/sf
> >_______________________________________________
> >Acpi-devel mailing list
> >Acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
> >https://lists.sourceforge.net/lists/listinfo/acpi-devel
> > 
> >
> 
> 
> 
> 
> -------------------------------------------------------
> This sf.net email is sponsored by:ThinkGeek
> Welcome to geek heaven.
> http://thinkgeek.com/sf
> _______________________________________________
> Acpi-devel mailing list
> Acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org


-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf