From mboxrd@z Thu Jan 1 00:00:00 1970 From: Abheek Anand Subject: Re: presario 1505us battery not found Date: Fri, 25 Apr 2003 16:55:14 -0400 Sender: acpi-devel-admin-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org Message-ID: <20030425205514.GA9608@cs.umd.edu> References: <20030424194943.GB25389@cs.umd.edu> <3EA9A03D.2000507@hp.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <3EA9A03D.2000507-VXdhtT5mjnY@public.gmane.org> Errors-To: acpi-devel-admin-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: Richard Black Cc: acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org List-Id: linux-acpi@vger.kernel.org Yes I tried doing that as well but the battery still doesnt show up. Regards, Abheek On (04/25/03 15:53), Richard Black wrote: > Have you tried booting with no AC power connected? > > Sincerely, > Richard Black > > Abheek Anand wrote: > > >Hi, > > > >After quite a bit of tinkering with my presario 1505us, I managed to get > >most > >of what I need up and working. Currently im using linux 2.5.67 with > >acpi-20030328. I am able to get ac-adaptor information, and the LID works > >fine. However, I am unable to get acpi to recognize my battery, which it > >always shows as absent. I have looked at several people's suggestions on > >this > >on the mailing list, but none of them work for me. > > > >I'm including a copy of the dmesg messages my system spews out. I also did > >the > >usual dsdt disassemble, fix, and include in kernel routine. I have put up > >my > >original (and fixed) dsdt on http://www.cs.umd.edu/~abheek/acpi . My > >/proc/acpi/battery/BAT1 entries show the battery as absent. > > > >Any help would be _very_ appreciated. > > > >Thanks, > >Abheek > > > > > >----- dmesg ---- > > > >Linux version 2.5.67 (root-c5qLw1b7B3dFcdTHL1IdjYdd74u8MsAO@public.gmane.org) (gcc version 3.2.2 20030222 > >(Red Hat Linux 3.2.2-5)) #6 Thu Apr 24 13:45:50 EDT 2003 > >Video mode to be used for restore is ffff > >BIOS-provided physical RAM map: > >BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) > >BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) > >BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) > >BIOS-e820: 0000000000100000 - 000000000ffd0000 (usable) > >BIOS-e820: 000000000ffd0000 - 000000000fff0c00 (reserved) > >BIOS-e820: 000000000fff0c00 - 000000000fffc000 (ACPI NVS) > >BIOS-e820: 000000000fffc000 - 0000000010000000 (reserved) > >255MB LOWMEM available. > >On node 0 totalpages: 65488 > > DMA zone: 4096 pages, LIFO batch:1 > > Normal zone: 61392 pages, LIFO batch:14 > > HighMem zone: 0 pages, LIFO batch:1 > >ACPI: RSDP (v000 COMPAQ ) @ 0x000f9970 > >ACPI: RSDT (v001 COMPAQ CPQ004A 09478.00544) @ 0x0fff0c84 > >ACPI: FADT (v002 COMPAQ CPQ004A 00000.00002) @ 0x0fff0c00 > >ACPI: SSDT (v001 COMPAQ CPQCrP4C 00000.04097) @ 0x0fff6637 > >ACPI: DSDT (v001 COMPAQ EVON800 00001.00000) @ 0x00000000 > >ACPI: BIOS passes blacklist > >Building zonelist for node : 0 > >Kernel command line: ro root=/dev/hda3 hdc=ide-scsi pci=noacpi > >ide_setup: hdc=ide-scsi > >Initializing CPU#0 > >PID hash table entries: 1024 (order 10: 8192 bytes) > >Detected 1594.399 MHz processor. > >Console: colour VGA+ 80x25 > >Calibrating delay loop... 3145.72 BogoMIPS > >Memory: 254948k/261952k available (2392k kernel code, 6292k reserved, 963k > >data, 132k init, 0k highmem) > >Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) > >Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) > >Mount-cache hash table entries: 512 (order: 0, 4096 bytes) > >-> /dev > >-> /dev/console > >-> /root > >CPU: Trace cache: 12K uops, L1 D cache: 8K > >CPU: L2 cache: 512K > >CPU: After generic, caps: 3febf9ff 00000000 00000000 00000000 > >Intel machine check architecture supported. > >Intel machine check reporting enabled on CPU#0. > >CPU#0: Intel P4/Xeon Extended MCE MSRs (12) available > >CPU: Intel(R) Pentium(R) 4 CPU 1.60GHz stepping 04 > >Enabling fast FPU save and restore... done. > >Enabling unmasked SIMD FPU exception support... done. > >Checking 'hlt' instruction... OK. > >POSIX conformance testing by UNIFIX > >Initializing RT netlink socket > >mtrr: v2.0 (20020519) > >PCI: BIOS32 entry (0xc00f0000) in high memory, cannot use. > >PCI: Using configuration type 1 > >BIO: pool of 256 setup, 15Kb (60 bytes/bio) > >biovec pool[0]: 1 bvecs: 256 entries (12 bytes) > >biovec pool[1]: 4 bvecs: 256 entries (48 bytes) > >biovec pool[2]: 16 bvecs: 256 entries (192 bytes) > >biovec pool[3]: 64 bvecs: 256 entries (768 bytes) > >biovec pool[4]: 128 bvecs: 256 entries (1536 bytes) > >biovec pool[5]: 256 bvecs: 256 entries (3072 bytes) > >ACPI: Subsystem revision 20030328 > > tbget-0292: *** Info: Table [DSDT] replaced by host OS > >tbxface-0117 [03] acpi_load_tables : ACPI Tables successfully acquired > >Parsing all Control > >Methods:................................................................................................................................................................................................................................................... > >Table [DSDT] - 784 Objects with 88 Devices 243 Methods 24 Regions > >Parsing all Control Methods: > >Table [SSDT] - 0 Objects with 0 Devices 0 Methods 0 Regions > >ACPI Namespace successfully loaded at root c04795dc > >evxfevnt-0093 [04] acpi_enable : Transition to ACPI mode > >successful > >evgpeblk-0731 [06] ev_create_gpe_block : GPE Block: [_GPE] 2 registers > >at 0000000000001028 on interrupt 9 > >evgpeblk-0736 [06] ev_create_gpe_block : GPE Block defined as GPE 0x00 > >to GPE 0x0F > >evgpeblk-0262 [07] ev_save_method_info : Registered GPE method _L0B as > >GPE number 0x0B > >evgpeblk-0731 [06] ev_create_gpe_block : GPE Block: [_GPE] 2 registers > >at 000000000000102C on interrupt 9 > >evgpeblk-0736 [06] ev_create_gpe_block : GPE Block defined as GPE 0x10 > >to GPE 0x1F > >evgpeblk-0262 [07] ev_save_method_info : Registered GPE method _L11 as > >GPE number 0x11 > >evgpeblk-0262 [07] ev_save_method_info : Registered GPE method _L13 as > >GPE number 0x13 > >evgpeblk-0262 [07] ev_save_method_info : Registered GPE method _L14 as > >GPE number 0x14 > >evgpeblk-0262 [07] ev_save_method_info : Registered GPE method _L15 as > >GPE number 0x15 > >evgpeblk-0262 [07] ev_save_method_info : Registered GPE method _L17 as > >GPE number 0x17 > >evgpeblk-0262 [07] ev_save_method_info : Registered GPE method _L18 as > >GPE number 0x18 > >evgpeblk-0262 [07] ev_save_method_info : Registered GPE method _L1C as > >GPE number 0x1C > >Executing all Device _STA and_INI methods:...evrgnini-0261: *** Error: > >Could not install pci_config handler for C03B, AE_ALREADY_EXISTS > >....evrgnini-0261: *** Error: Could not install pci_config handler for > >C03B, AE_ALREADY_EXISTS > >....................evregion-0254 [22] ev_address_space_dispa: no handler > >for region(cff6d3a8) [EmbeddedControl] > >exfldio-0235 [21] ex_access_region : Region EmbeddedControl(3) has no > >handler > >evregion-0254 [22] ev_address_space_dispa: no handler for region(cff6d3a8) > >[EmbeddedControl] > >exfldio-0235 [21] ex_access_region : Region EmbeddedControl(3) has no > >handler > >psparse-1121: *** Error: Method execution failed > >[\_SB_.C03B.C04E.C0CF.C0D3] (Node cff6c728), AE_NOT_EXIST > >psparse-1121: *** Error: Method execution failed > >[\_SB_.C03B.C04E.C0CF._INI] (Node cff696a8), AE_NOT_EXIST > > nsinit-0397 [06] ns_init_one_device : \_SB_.C03B.C04E.C0CF._INI > > failed: AE_NOT_EXIST > >.........................................evrgnini-0261: *** Error: Could > >not install pci_config handler for C03B, AE_ALREADY_EXISTS > >....................... > >91 Devices found containing: 91 _STA, 4 _INI methods > >Completing Region/Field/Buffer/Package > >initialization:................................................................................................. > >Initialized 14/24 Regions 0/0 Fields 25/26 Buffers 58/67 Packages (835 > >nodes) > >ACPI: Interpreter enabled > >ACPI: Using PIC for interrupt routing > >ACPI: PCI Root Bridge [C03B] (00:00) > >PCI: Probing PCI hardware (bus 00) > >Transparent bridge - Intel Corp. 82801BAM/CAM PCI Bri > >ACPI: PCI Interrupt Routing Table [\_SB_.C03B._PRT] > >ACPI: PCI Interrupt Routing Table [\_SB_.C03B.C03C._PRT] > >ACPI: PCI Interrupt Routing Table [\_SB_.C03B.C04D._PRT] > >ACPI: Embedded Controller [C0CF] (gpe 29) > >ACPI: Power Resource [C142] (off) > >ACPI: Power Resource [C156] (off) > >ACPI: Power Resource [C15A] (off) > >ACPI: Power Resource [C15E] (off) > >ACPI: Power Resource [C167] (on) > >ACPI: PCI Interrupt Link [C0B5] (IRQs 5 10 *11) > >ACPI: PCI Interrupt Link [C0B6] (IRQs *5 10 11) > >ACPI: PCI Interrupt Link [C0B7] (IRQs 5 10 *11) > >ACPI: PCI Interrupt Link [C0B8] (IRQs 5 10 *11) > >ACPI: PCI Interrupt Link [C0B9] (IRQs 5 *10 11) > >pci_link-0110 [25] acpi_pci_link_check_po: Blank IRQ resource > >ACPI: PCI Interrupt Link [C0BA] (IRQs, disabled) > >pci_link-0110 [26] acpi_pci_link_check_po: Blank IRQ resource > >ACPI: PCI Interrupt Link [C0BB] (IRQs, disabled) > >pci_link-0110 [27] acpi_pci_link_check_po: Blank IRQ resource > >ACPI: PCI Interrupt Link [C0BC] (IRQs, disabled) > >ACPI: Power Resource [C0CE] (on) > >ACPI: Power Resource [C1D3] (off) > >ACPI: Power Resource [C1D4] (off) > >ACPI: Power Resource [C1D5] (off) > >ACPI: Power Resource [C1D6] (off) > >ACPI: Power Resource [C1E1] (off) > >ACPI: Power Resource [C1E2] (off) > >ACPI: Power Resource [C1E3] (off) > >Linux Plug and Play Support v0.96 (c) Adam Belay > >PnPBIOS: Scanning system for PnP BIOS support... > >PnPBIOS: Found PnP BIOS installation structure at 0xc00f2e20 > >PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x2e4e, dseg 0xf0000 > >PnPBIOS: 16 nodes reported by PnP BIOS; 16 recorded by driver > >block request queues: > >128 requests per read queue > >128 requests per write queue > >8 requests per batch > >enter congestion at 15 > >exit congestion at 17 > >Linux Kernel Card Services 3.1.22 > > options: [pci] [cardbus] [pm] > >PCI: Probing PCI hardware > >PCI: Using IRQ router PIIX [8086/248c] at 00:1f.0 > >cpufreq: Intel(R) SpeedStep(TM) for this processor not (yet) available. > >cpufreq: P4/Xeon(TM) CPU On-Demand Clock Modulation available > >Enabling SEP on CPU 0 > >Journalled Block Device driver loaded > >Installing knfsd (copyright (C) 1996 okir-pn4DOG8n3UYbFoVRYvo4fw@public.gmane.org). > >udf: registering filesystem > >ACPI: AC Adapter [ACAD] (off-line) > >ACPI: Battery Slot [BAT1] (battery absent) > >ACPI: Power Button (FF) [PWRF] > >ACPI: Sleep Button (CM) [SLPB] > >ACPI: Lid Switch [LID] > >ACPI: Fan [C1D7] (off) > >ACPI: Fan [C1D8] (off) > >ACPI: Fan [C1D9] (off) > >ACPI: Fan [C1DA] (off) > >ACPI: Processor [C000] (supports C1 C2 C3, 8 throttling states) > >[ACPI Debug] Integer: 0000000000000E62 > >[ACPI Debug] Integer: 0000000000000DFE > >[ACPI Debug] Integer: 0000000000000D9A > >[ACPI Debug] Integer: 0000000000000D36 > >[ACPI Debug] Integer: 0000000000000CD2 > >ACPI: Thermal Zone [TZ1] (32 C) > >[ACPI Debug] Integer: 0000000000000DFE > >[ACPI Debug] Integer: 0000000000000D68 > >[ACPI Debug] Integer: 0000000000000D04 > >[ACPI Debug] Integer: 0000000000000CA0 > >ACPI: Thermal Zone [TZ2] (28 C) > >[ACPI Debug] Integer: 0000000000000CD2 > >ACPI: Thermal Zone [TZ3] (27 C) > > > >----- ------ > > > > > >------------------------------------------------------- > >This sf.net email is sponsored by:ThinkGeek > >Welcome to geek heaven. > >http://thinkgeek.com/sf > >_______________________________________________ > >Acpi-devel mailing list > >Acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org > >https://lists.sourceforge.net/lists/listinfo/acpi-devel > > > > > > > > > ------------------------------------------------------- > This sf.net email is sponsored by:ThinkGeek > Welcome to geek heaven. > http://thinkgeek.com/sf > _______________________________________________ > Acpi-devel mailing list > Acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf