From: Abheek Anand <abheek-VX+DGZyGJwM3uPMLIKxrzw@public.gmane.org>
To: Kevin Schmidt <w9cf-iy676YoZKZKAgX/H7s3LlTe48wsgrGvP@public.gmane.org>
Cc: acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
Subject: Re: presario 1505us battery not found
Date: Sat, 26 Apr 2003 14:35:26 -0400 [thread overview]
Message-ID: <20030426183526.GA11530@cs.umd.edu> (raw)
In-Reply-To: <200304261058.DAA12435-iy676YoZKZKAgX/H7s3LlTe48wsgrGvP@public.gmane.org>
Well it does the trick on my hardware. I am now able to check up on battery
status etc. Next step is trying to get suspend to work ;-)
Thanks a lot
Abheek
On (04/26/03 03:58), Kevin Schmidt wrote:
> I am running a 2.4.19 kernel and acpi20020918, on a compaq evo1000v.
> Many things may have improved since then. I finally gave up and patched
> the dsdt to always report the battery present. I was then able to get
> the battery charge status etc.; I changed:
> Return (local1)
> to
> Return (Or (local1,0x10))
> in my C10F method, to set the battery present bit. I don't know if this
> name is the same in other compaq dsdts.
>
> > Date: Thu, 24 Apr 2003 15:49:43 -0400
> > From: Abheek Anand <abheek-VX+DGZyGJwM3uPMLIKxrzw@public.gmane.org>
> > To: acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
> > Organization: CS Department, University of Maryland
> > Subject: [ACPI] presario 1505us battery not found
> >
> > Hi,
> >
> > After quite a bit of tinkering with my presario 1505us, I managed to get most
> > of what I need up and working. Currently im using linux 2.5.67 with
> > acpi-20030328. I am able to get ac-adaptor information, and the LID works
> > fine. However, I am unable to get acpi to recognize my battery, which it
> > always shows as absent. I have looked at several people's suggestions on this
> > on the mailing list, but none of them work for me.
> >
> > I'm including a copy of the dmesg messages my system spews out. I also did the
> > usual dsdt disassemble, fix, and include in kernel routine. I have put up my
> > original (and fixed) dsdt on http://www.cs.umd.edu/~abheek/acpi . My
> > /proc/acpi/battery/BAT1 entries show the battery as absent.
> >
> > Any help would be _very_ appreciated.
> >
> > Thanks,
> > Abheek
> >
> =-------------------------------------------------------------
> Kevin Schmidt, w9cf-iy676YoZKZKAgX/H7s3LlTe48wsgrGvP@public.gmane.org, http://fermi.la.asu.edu/w9cf
> Department of Physics and Astronomy
> Arizona State University, Tempe, AZ 85287-1504
> (480) 965-8240 Fax: (480) 965-7954
>
>
> -------------------------------------------------------
> This sf.net email is sponsored by:ThinkGeek
> Welcome to geek heaven.
> http://thinkgeek.com/sf
> _______________________________________________
> Acpi-devel mailing list
> Acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
> https://lists.sourceforge.net/lists/listinfo/acpi-devel
Abheek
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
next prev parent reply other threads:[~2003-04-26 18:35 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-04-26 10:58 Re:presario 1505us battery not found Kevin Schmidt
[not found] ` <200304261058.DAA12435-iy676YoZKZKAgX/H7s3LlTe48wsgrGvP@public.gmane.org>
2003-04-26 18:35 ` Abheek Anand [this message]
-- strict thread matches above, loose matches on Subject: below --
2003-04-28 21:38 presario " Moore, Robert
2003-04-28 17:51 Moore, Robert
[not found] ` <D3A3AA459175A44CB5326F26DA7A189C1C3C2B-sBd4vmA9Se58QrAoInS571DQ4js95KgL@public.gmane.org>
2003-04-28 19:14 ` Abheek Anand
2003-04-25 21:53 Moore, Robert
2003-04-24 19:49 Abheek Anand
2003-04-25 20:53 ` Richard Black
[not found] ` <3EA9A03D.2000507-VXdhtT5mjnY@public.gmane.org>
2003-04-25 20:55 ` Abheek Anand
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20030426183526.GA11530@cs.umd.edu \
--to=abheek-vx+dgzygjwm3upmlikxrzw@public.gmane.org \
--cc=acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
--cc=w9cf-iy676YoZKZKAgX/H7s3LlTe48wsgrGvP@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox