Re: [2.5.69] S3 does not come back / Sony Vaio C1MHP

[Ducrot Bruno <ducrot-kk6yZipjEM5g9hUCZPvPmw@public.gmane.org>]

On Tue, May 27, 2003 at 12:15:01PM +0200, Florian Lohoff wrote:
> 
> Hi,
> S3 would be the reason to switch to 2.5 - bad that it does not work for
> me ;) 
> 
> Sony Vaio C1MHP 
> Transmeta TM5800
> 
> echo 3 >/proc/acpi/sleep
> 
> goes to sleep - The power led turns blinking red - good sign - after
> pressing the powerbutton the machine powers up (Powerled turns green and
> batterie led turns orange) but nothing happens. Backlight does not turn 
> on nor does the disk do anything. From looking at the screen in bright
> light it does not write anything to it.
> 
> I need to disconnect the battery to get to a defined state again. The
> power-button does nothing and even then the first power-on does
> nothing - need to powercyle once after battery disconnect.
> 

Could you try without frame buffer?


-- 
Ducrot Bruno

--  Which is worse:  ignorance or apathy?
--  Don't know.  Don't care.


-------------------------------------------------------
This SF.net email is sponsored by: ObjectStore.
If flattening out C++ or Java code to make your application fit in a
relational database is painful, don't do it! Check out ObjectStore.
Now part of Progress Software. http://www.objectstore.net/sourceforge