From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ducrot Bruno Subject: Re: [2.5.69] S3 does not come back / Sony Vaio C1MHP Date: Tue, 27 May 2003 15:13:15 +0200 Sender: acpi-devel-admin-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org Message-ID: <20030527131315.GS346@poupinou.org> References: <20030527101501.GB1247@paradigm.rfc822.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <20030527101501.GB1247-L3tpvOS5ZD2KugBFyThYrEB+6BGkLq7r@public.gmane.org> Errors-To: acpi-devel-admin-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: Florian Lohoff Cc: acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org List-Id: linux-acpi@vger.kernel.org On Tue, May 27, 2003 at 12:15:01PM +0200, Florian Lohoff wrote: > > Hi, > S3 would be the reason to switch to 2.5 - bad that it does not work for > me ;) > > Sony Vaio C1MHP > Transmeta TM5800 > > echo 3 >/proc/acpi/sleep > > goes to sleep - The power led turns blinking red - good sign - after > pressing the powerbutton the machine powers up (Powerled turns green and > batterie led turns orange) but nothing happens. Backlight does not turn > on nor does the disk do anything. From looking at the screen in bright > light it does not write anything to it. > > I need to disconnect the battery to get to a defined state again. The > power-button does nothing and even then the first power-on does > nothing - need to powercyle once after battery disconnect. > Could you try without frame buffer? -- Ducrot Bruno -- Which is worse: ignorance or apathy? -- Don't know. Don't care. ------------------------------------------------------- This SF.net email is sponsored by: ObjectStore. If flattening out C++ or Java code to make your application fit in a relational database is painful, don't do it! Check out ObjectStore. Now part of Progress Software. http://www.objectstore.net/sourceforge