Re: [2.5.69] S3 does not come back / Sony Vaio C1MHP

Ducrot Bruno
2003-05-27T13:34:01Z

On Tue, May 27, 2003 at 03:15:53PM +0200, Florian Lohoff wrote:
> On Tue, May 27, 2003 at 03:13:15PM +0200, Ducrot Bruno wrote:
> > > Hi,
> > > S3 would be the reason to switch to 2.5 - bad that it does not work for
> > > me ;)
> > >
> > > Sony Vaio C1MHP
> > > Transmeta TM5800
> > >
> > > echo 3 >/proc/acpi/sleep
> > >
> > > goes to sleep - The power led turns blinking red - good sign - after
> > > pressing the powerbutton the machine powers up (Powerled turns green and
> > > batterie led turns orange) but nothing happens. Backlight does not turn
> > > on nor does the disk do anything. From looking at the screen in bright
> > > light it does not write anything to it.
> > >
> > > I need to disconnect the battery to get to a defined state again. The
> > > power-button does nothing and even then the first power-on does
> > > nothing - need to powercyle once after battery disconnect.
> >
> > Could you try without frame buffer?
> >
>
> Its on pure VGA 80x25 the radeonfb does not get initialized - another
> bug i am chasing.
>

What is the command line ?
I have seen that :

Video mode to be used for restore is f00

Also, provide _full_ demsg, not only greping acpi.

--
Ducrot Bruno

-- Which is worse: ignorance or apathy?
-- Don't know. Don't care.

-------------------------------------------------------
This SF.net email is sponsored by: ObjectStore.
If flattening out C++ or Java code to make your application fit in a
relational database is painful, don't do it! Check out ObjectStore.
Now part of Progress Software. http://www.objectstore.net/sourceforge