[2.5.69] S3 does not come back / Sony Vaio C1MHP

[2.5.69] S3 does not come back / Sony Vaio C1MHP

[Florian Lohoff]

[-- Attachment #1: Type: text/plain, Size: 6554 bytes --]


Hi,
S3 would be the reason to switch to 2.5 - bad that it does not work for
me ;) 

Sony Vaio C1MHP 
Transmeta TM5800

echo 3 >/proc/acpi/sleep

goes to sleep - The power led turns blinking red - good sign - after
pressing the powerbutton the machine powers up (Powerled turns green and
batterie led turns orange) but nothing happens. Backlight does not turn 
on nor does the disk do anything. From looking at the screen in bright
light it does not write anything to it.

I need to disconnect the battery to get to a defined state again. The
power-button does nothing and even then the first power-on does
nothing - need to powercyle once after battery disconnect.


paradigm:~# lsmod
Module                  Size  Used by
snd_ali5451            12004  0 
snd_ac97_codec         32900  1 snd_ali5451
snd_pcm                53568  1 snd_ali5451
snd_page_alloc          3876  1 snd_pcm
snd_timer              13152  1 snd_pcm
snd                    27904  4 snd_ali5451,snd_ac97_codec,snd_pcm,snd_timer
soundcore               3680  1 snd
usb_storage            19232  0 
scsi_mod               73132  1 usb_storage
ohci_hcd               11680  0 
usbcore                65332  4 usb_storage,ohci_hcd
ohci1394               22720  0 
ieee1394               42376  1 ohci1394

paradigm:~# dmesg
Linux version 2.5.69 (root@paradigm) (gcc version 2.95.4 20011002 (Debian prerelease)) #1 Tue May 27 11:40:21 CEST 2003
Video mode to be used for restore is f00
[...]
ACPI: RSDP (v000 PTLTD                      ) @ 0x000f7bc0
ACPI: RSDT (v001 SONY   E0       08194.02068) @ 0x0eef86ed
ACPI: FADT (v002 SONY   E0       08194.02068) @ 0x0eefbe82
ACPI: SSDT (v001 PTLTD  ACPIPST1 08194.02068) @ 0x0eefbf06
ACPI: DSDT (v001   SONY E0       08194.02068) @ 0x00000000
ACPI: BIOS passes blacklist
Sony Vaio laptop detected.
[...]
ACPI: Subsystem revision 20030418
 tbxface-0117 [03] acpi_load_tables      : ACPI Tables successfully acquired
Parsing all Control Methods:...........................................................................................................................
Table [DSDT] - 499 Objects with 48 Devices 122 Methods 13 Regions
Parsing all Control Methods:
Table [SSDT] - 0 Objects with 0 Devices 0 Methods 0 Regions
ACPI Namespace successfully loaded at root c037535c
evxfevnt-0093 [04] acpi_enable           : Transition to ACPI mode successful
evgpeblk-0740 [06] ev_create_gpe_block   : GPE Block: [_GPE] 8 registers at 0000000000008018 on interrupt 9
evgpeblk-0745 [06] ev_create_gpe_block   : GPE Block defined as GPE 0x00 to GPE 0x3F
evgpeblk-0262 [08] ev_save_method_info   : Registered GPE method _L08 as GPE number 0x08
evgpeblk-0262 [08] ev_save_method_info   : Registered GPE method _L09 as GPE number 0x09
evgpeblk-0262 [08] ev_save_method_info   : Registered GPE method _L0B as GPE number 0x0B
evgpeblk-0262 [08] ev_save_method_info   : Registered GPE method _L0D as GPE number 0x0D
Executing all Device _STA and_INI methods:.....................[ACPI Debug] String: LNK2_STA
.[ACPI Debug] String: LNK3_STA
.[ACPI Debug] String: LNK4_STA
.[ACPI Debug] String: LNK5_STA
.[ACPI Debug] String: LNK6_STA
.[ACPI Debug] String: LNK7_STA
.[ACPI Debug] String: LNK8_STA
.[ACPI Debug] String: LNKU_STA
....................
48 Devices found containing: 48 _STA, 3 _INI methods
Completing Region/Field/Buffer/Package initialization:....................................................................
Initialized 7/13 Regions 0/0 Fields 32/32 Buffers 28/28 Packages (502 nodes)
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Embedded Controller [EC0] (gpe 1)
ACPI: PCI Interrupt Link [LNK1] (IRQs *9)
[ACPI Debug] String: LNK2_STA
[ACPI Debug] String: LNK2_STA
[ACPI Debug] String: LNK2_STA
[ACPI Debug] String: LNK2_CRS
ACPI: PCI Interrupt Link [LNK2] (IRQs *9)
[ACPI Debug] String: LNK3_STA
[ACPI Debug] String: LNK3_STA
[ACPI Debug] String: LNK3_STA
[ACPI Debug] String: LNK3_CRS
ACPI: PCI Interrupt Link [LNK3] (IRQs *9)
[ACPI Debug] String: LNK4_STA
[ACPI Debug] String: LNK4_STA
[ACPI Debug] String: LNK4_STA
[ACPI Debug] String: LNK4_CRS
ACPI: PCI Interrupt Link [LNK4] (IRQs *9)
[ACPI Debug] String: LNK5_STA
[ACPI Debug] String: LNK5_STA
[ACPI Debug] String: LNK5_STA
[ACPI Debug] String: LNK5_CRS
ACPI: PCI Interrupt Link [LNK5] (IRQs *9)
[ACPI Debug] String: LNK6_STA
[ACPI Debug] String: LNK6_STA
[ACPI Debug] String: LNK6_STA
ACPI: PCI Interrupt Link [LNK6] (IRQs 9, disabled)
[ACPI Debug] String: LNK7_STA
[ACPI Debug] String: LNK7_STA
[ACPI Debug] String: LNK7_STA
[ACPI Debug] String: LNK7_CRS
ACPI: PCI Interrupt Link [LNK7] (IRQs *9)
[ACPI Debug] String: LNK8_STA
[ACPI Debug] String: LNK8_STA
[ACPI Debug] String: LNK8_STA
[ACPI Debug] String: LNK8_CRS
ACPI: PCI Interrupt Link [LNK8] (IRQs *9)
[ACPI Debug] String: LNKU_STA
[ACPI Debug] String: LNKU_STA
[ACPI Debug] String: LNKU_STA
[ACPI Debug] String: LNKU_CRS
ACPI: PCI Interrupt Link [LNKU] (IRQs *9)
ACPI: Power Resource [LRP0] (off)
block request queues:
 128 requests per read queue
 128 requests per write queue
 8 requests per batch
 enter congestion at 15
 exit congestion at 17
Linux Kernel Card Services 3.1.22
  options:  [pci] [cardbus] [pm]
[ACPI Debug] String: LNK6_SRS
[ACPI Debug] String: LNK6_STA
[ACPI Debug] String: LNK6_STA
[ACPI Debug] String: LNK6_CRS
ACPI: PCI Interrupt Link [LNK6] enabled at IRQ 9
 pci_irq-0295 [24] acpi_pci_irq_derive   : Unable to derive IRQ for device 00:10.0
ACPI: No IRQ known for interrupt pin A of device 00:10.0 - using IRQ 255
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
Initializing RT netlink socket
Enabling SEP on CPU 0
Journalled Block Device driver loaded
Initializing Cryptographic API
ACPI: AC Adapter [ACAD] (on-line)
ACPI: Battery Slot [BAT1] (battery present)
ACPI: Lid Switch [LID]
ACPI: Power Button (CM) [PWRB]
ACPI: Fan [LRA0] (off)
ACPI: Processor [CPU0] (supports C1 C2 C3)
ACPI: Thermal Zone [ATF0] (52 C)
[...]
ACPI: (supports S0 S3 S4 S5)
Resume Machine: resuming from /dev/hda5
Resuming from device hda5
Resume Machine: This is normal swap space


-- 
Florian Lohoff                  flo-BCn6idZOOBwdnm+yROfE0A@public.gmane.org             +49-5201-669912
                        Heisenberg may have been here.

[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]

Re: [2.5.69] S3 does not come back / Sony Vaio C1MHP

[Florian Lohoff]

[-- Attachment #1: Type: text/plain, Size: 832 bytes --]

On Tue, May 27, 2003 at 07:29:41PM +0800, Michael Frank wrote:
> 
> Common issue here is that many drivers have not been
> validated to resume properly.
> 
> Please use S3 first without modules/drivers in single user
> console mode only. (boot with: single)

Done - Same behaviour - Even with init=/bin/sh booting
mounting proc and echoing s3 - Same ... Immediate suspend
- wakeup hangs.

> 2.5.70 - just out - seems to be better than 2.5.69, but
> it still causes problems with IDE on my machine (TM5600
> Tosh Libretto L2), msg follows.

2.5.70 does not boot for me - Some obscure unhandled IRQs coming up
which hangs the machine on boot.

Flo
-- 
Florian Lohoff                  flo-BCn6idZOOBwdnm+yROfE0A@public.gmane.org             +49-5201-669912
                        Heisenberg may have been here.

[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]

Re: [2.5.69] S3 does not come back / Sony Vaio C1MHP

[Ducrot Bruno]

On Tue, May 27, 2003 at 12:15:01PM +0200, Florian Lohoff wrote:
> 
> Hi,
> S3 would be the reason to switch to 2.5 - bad that it does not work for
> me ;) 
> 
> Sony Vaio C1MHP 
> Transmeta TM5800
> 
> echo 3 >/proc/acpi/sleep
> 
> goes to sleep - The power led turns blinking red - good sign - after
> pressing the powerbutton the machine powers up (Powerled turns green and
> batterie led turns orange) but nothing happens. Backlight does not turn 
> on nor does the disk do anything. From looking at the screen in bright
> light it does not write anything to it.
> 
> I need to disconnect the battery to get to a defined state again. The
> power-button does nothing and even then the first power-on does
> nothing - need to powercyle once after battery disconnect.
> 

Could you try without frame buffer?


-- 
Ducrot Bruno

--  Which is worse:  ignorance or apathy?
--  Don't know.  Don't care.


-------------------------------------------------------
This SF.net email is sponsored by: ObjectStore.
If flattening out C++ or Java code to make your application fit in a
relational database is painful, don't do it! Check out ObjectStore.
Now part of Progress Software. http://www.objectstore.net/sourceforge

Re: [2.5.69] S3 does not come back / Sony Vaio C1MHP

[Florian Lohoff]

[-- Attachment #1: Type: text/plain, Size: 1130 bytes --]

On Tue, May 27, 2003 at 03:13:15PM +0200, Ducrot Bruno wrote:
> > Hi,
> > S3 would be the reason to switch to 2.5 - bad that it does not work for
> > me ;) 
> > 
> > Sony Vaio C1MHP 
> > Transmeta TM5800
> > 
> > echo 3 >/proc/acpi/sleep
> > 
> > goes to sleep - The power led turns blinking red - good sign - after
> > pressing the powerbutton the machine powers up (Powerled turns green and
> > batterie led turns orange) but nothing happens. Backlight does not turn 
> > on nor does the disk do anything. From looking at the screen in bright
> > light it does not write anything to it.
> > 
> > I need to disconnect the battery to get to a defined state again. The
> > power-button does nothing and even then the first power-on does
> > nothing - need to powercyle once after battery disconnect.
> 
> Could you try without frame buffer?
> 

Its on pure VGA 80x25 the radeonfb does not get initialized - another
bug i am chasing.

Flo
-- 
Florian Lohoff                  flo-BCn6idZOOBwdnm+yROfE0A@public.gmane.org             +49-5201-669912
                        Heisenberg may have been here.

[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]

Re: [2.5.69] S3 does not come back / Sony Vaio C1MHP

[Ducrot Bruno]

On Tue, May 27, 2003 at 03:15:53PM +0200, Florian Lohoff wrote:
> On Tue, May 27, 2003 at 03:13:15PM +0200, Ducrot Bruno wrote:
> > > Hi,
> > > S3 would be the reason to switch to 2.5 - bad that it does not work for
> > > me ;) 
> > > 
> > > Sony Vaio C1MHP 
> > > Transmeta TM5800
> > > 
> > > echo 3 >/proc/acpi/sleep
> > > 
> > > goes to sleep - The power led turns blinking red - good sign - after
> > > pressing the powerbutton the machine powers up (Powerled turns green and
> > > batterie led turns orange) but nothing happens. Backlight does not turn 
> > > on nor does the disk do anything. From looking at the screen in bright
> > > light it does not write anything to it.
> > > 
> > > I need to disconnect the battery to get to a defined state again. The
> > > power-button does nothing and even then the first power-on does
> > > nothing - need to powercyle once after battery disconnect.
> > 
> > Could you try without frame buffer?
> > 
> 
> Its on pure VGA 80x25 the radeonfb does not get initialized - another
> bug i am chasing.
> 

What is the command line ?
I have seen that :

Video mode to be used for restore is f00

Also, provide _full_ demsg, not only greping acpi.


-- 
Ducrot Bruno

--  Which is worse:  ignorance or apathy?
--  Don't know.  Don't care.


-------------------------------------------------------
This SF.net email is sponsored by: ObjectStore.
If flattening out C++ or Java code to make your application fit in a
relational database is painful, don't do it! Check out ObjectStore.
Now part of Progress Software. http://www.objectstore.net/sourceforge

Re: [2.5.69] S3 does not come back / Sony Vaio C1MHP

[Knut Neumann]

Am Die, 2003-05-27 um 12.15 schrieb Florian Lohoff:
> Sony Vaio C1MHP 
> Transmeta TM5800

I can definetely confirm the very same behaviour for

Sony Vaio Z600TEK
Intel PIII-750

> goes to sleep - The power led turns blinking red - good sign - after
> pressing the powerbutton the machine powers up (Powerled turns green and
> batterie led turns orange) but nothing happens. Backlight does not turn 
> on nor does the disk do anything. From looking at the screen in bright
> light it does not write anything to it.
> 
> I need to disconnect the battery to get to a defined state again. The
> power-button does nothing and even then the first power-on does
> nothing - need to powercyle once after battery disconnect.

I tried lots of different stuff (see mail archives) and came to the
conclusion that it does never jump to the wakeup address indeed. So it
seems that either that some hardware does not correctly get prepared for
sleep and it thus hangs in pre-OS-controlled (whats the correct term
here?) code when waking up or there is a bug in sonys pre-OS-controlled
code.

i thought of trying to set OS String to Windows NT or something but did
not try that yet...

Regards
-Knut



-------------------------------------------------------
This SF.net email is sponsored by: ObjectStore.
If flattening out C++ or Java code to make your application fit in a
relational database is painful, don't do it! Check out ObjectStore.
Now part of Progress Software. http://www.objectstore.net/sourceforge

Re: [2.5.69] S3 does not come back / Sony Vaio C1MHP

[Pavel Machek]

Hi!

> S3 would be the reason to switch to 2.5 - bad that it does not work for
> me ;) 
> 
> Sony Vaio C1MHP 
> Transmeta TM5800
> 
> echo 3 >/proc/acpi/sleep

You may need to pass acpi_sleep=s3_bios or acpi_sleep=s3_mode (or how
is it called).
								Pavel
-- 
When do you have a heart between your knees?
[Johanka's followup: and *two* hearts?]


-------------------------------------------------------
This SF.net email is sponsored by: eBay
Get office equipment for less on eBay!
http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5

Re: [2.5.69] S3 does not come back / Sony Vaio C1MHP

[Florian Lohoff]

[-- Attachment #1: Type: text/plain, Size: 530 bytes --]

On Wed, May 28, 2003 at 11:41:24PM +0200, Pavel Machek wrote:
> > S3 would be the reason to switch to 2.5 - bad that it does not work for
> > me ;) 
> > 
> > Sony Vaio C1MHP 
> > Transmeta TM5800
> > 
> > echo 3 >/proc/acpi/sleep
> 
> You may need to pass acpi_sleep=s3_bios or acpi_sleep=s3_mode (or how
> is it called).

tried that - no luck

Flo
-- 
Florian Lohoff                  flo-BCn6idZOOBwdnm+yROfE0A@public.gmane.org             +49-5201-669912
                        Heisenberg may have been here.

[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]

Re: [2.5.69] S3 does not come back / Sony Vaio C1MHP

[Pavel Machek]

Hi!

> On Wed, May 28, 2003 at 11:41:24PM +0200, Pavel Machek wrote:
> > > S3 would be the reason to switch to 2.5 - bad that it does not work for
> > > me ;) 
> > > 
> > > Sony Vaio C1MHP 
> > > Transmeta TM5800
> > > 
> > > echo 3 >/proc/acpi/sleep
> > 
> > You may need to pass acpi_sleep=s3_bios or acpi_sleep=s3_mode (or how
> > is it called).
> 
> tried that - no luck

Well, 8 leds on paralel port and book about i386 assembly is the next
step, I'm afraid.

Or you can make sony (or someone else?) donate vaio notebook to me
;-).
								Pavel
-- 
When do you have a heart between your knees?
[Johanka's followup: and *two* hearts?]


-------------------------------------------------------
This SF.net email is sponsored by: eBay
Get office equipment for less on eBay!
http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5

Re: [2.5.69] S3 does not come back / Sony Vaio C1MHP

[Florian Lohoff]

[-- Attachment #1: Type: text/plain, Size: 515 bytes --]

On Thu, May 29, 2003 at 09:17:35PM +0200, Pavel Machek wrote:
> > tried that - no luck
> 
> Well, 8 leds on paralel port and book about i386 assembly is the next
> step, I'm afraid.
> 
> Or you can make sony (or someone else?) donate vaio notebook to me
> ;-).

If it had a parallel port :) Firewire, USB, VGA, Ethernet - thats it.

Flo
-- 
Florian Lohoff                  flo-BCn6idZOOBwdnm+yROfE0A@public.gmane.org             +49-5201-669912
                        Heisenberg may have been here.

[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]

Re: [2.5.69] S3 does not come back / Sony Vaio C1MHP

[Ducrot Bruno]

On Sat, May 31, 2003 at 10:57:06AM +0200, Florian Lohoff wrote:
> On Thu, May 29, 2003 at 09:17:35PM +0200, Pavel Machek wrote:
> > > tried that - no luck
> > 
> > Well, 8 leds on paralel port and book about i386 assembly is the next
> > step, I'm afraid.
> > 
> > Or you can make sony (or someone else?) donate vaio notebook to me
> > ;-).
> 
> If it had a parallel port :) Firewire, USB, VGA, Ethernet - thats it.
> 

Keyboard led blink, perhaps ?

-- 
Ducrot Bruno

--  Which is worse:  ignorance or apathy?
--  Don't know.  Don't care.


-------------------------------------------------------
This SF.net email is sponsored by:  Etnus, makers of TotalView, The best
thread debugger on the planet. Designed with thread debugging features
you've never dreamed of, try TotalView 6 free at www.etnus.com.

Re: [2.5.69] S3 does not come back / Sony Vaio C1MHP

[Pavel Machek]

Hi!

> > > > tried that - no luck
> > > 
> > > Well, 8 leds on paralel port and book about i386 assembly is the next
> > > step, I'm afraid.
> > > 
> > > Or you can make sony (or someone else?) donate vaio notebook to me
> > > ;-).
> > 
> > If it had a parallel port :) Firewire, USB, VGA, Ethernet - thats it.

> Keyboard led blink, perhaps ?

That's hard I'm afraid. Beeping on speaker should be easier.

								Pavel
-- 
When do you have a heart between your knees?
[Johanka's followup: and *two* hearts?]


-------------------------------------------------------
This SF.net email is sponsored by:  Etnus, makers of TotalView, The best
thread debugger on the planet. Designed with thread debugging features
you've never dreamed of, try TotalView 6 free at www.etnus.com.

Re: [2.5.69] S3 does not come back / Sony Vaio C1MHP

[Alan Cox]

On Iau, 2003-06-05 at 23:01, Pavel Machek wrote:
> > Keyboard led blink, perhaps ?
> 
> That's hard I'm afraid. Beeping on speaker should be easier.

-ac has a pluggable morse code ops that should be ideal for this.
Speaker is definitely easier though (and it would be nice to have
speaker morse too)



-------------------------------------------------------
This SF.net email is sponsored by:  Etnus, makers of TotalView, The best
thread debugger on the planet. Designed with thread debugging features
you've never dreamed of, try TotalView 6 free at www.etnus.com.

Re: [2.5.69] S3 does not come back / Sony Vaio C1MHP

[Pavel Machek]

Hi!

> > > Keyboard led blink, perhaps ?
> > 
> > That's hard I'm afraid. Beeping on speaker should be easier.
> 
> -ac has a pluggable morse code ops that should be ideal for this.
> Speaker is definitely easier though (and it would be nice to have
> speaker morse too)

This one needs to be called from assembly in real mode (during resume)
and shortly after entering protected. panic code is unlikely to be
helpfull.

							Pavel

-- 
When do you have a heart between your knees?
[Johanka's followup: and *two* hearts?]


-------------------------------------------------------
This SF.net email is sponsored by:  Etnus, makers of TotalView, The best
thread debugger on the planet. Designed with thread debugging features
you've never dreamed of, try TotalView 6 free at www.etnus.com.