* Re: interesting bug i have been fighting
[not found] ` <3ACA40606221794F80A5670F0AF15F8401720C52-SRlDPOYGfgogGBtAFL8yw7fspsVTdybXVpNB7YpNyf8@public.gmane.org>
@ 2003-12-23 21:13 ` Steven Michalske
0 siblings, 0 replies; 5+ messages in thread
From: Steven Michalske @ 2003-12-23 21:13 UTC (permalink / raw)
To: acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f
[-- Attachment #1: Type: text/plain, Size: 883 bytes --]
On Tuesday 23 December 2003 1:59 am, you wrote:
> >On Friday 19 December 2003 1:36 am, Steven Michalske wrote:
> >> this has existed in the 2.6 series for me test4 through release
> >>
> >> I am running an IBM thinkpad a21p
> >>
> >> when acpi events occur, power unpluged, extra keys for back light of
>
> screen
>
> >> are pressed, my keyboard will lock up if xfree86 has been ran.
> >>
> >> ocaisonly i will get a semafor locking error from osl
> >>
> >> osl-0892 [1952] os_wait_semaphore : Failed to acquire
> >> semaphore[cffee620| 1|0], AE_TIME
> >
> >this seems to not pertain to the keyboard locking up
> >
> >> is my latest capture of this event.
> >
> > turning on debuging of the acpi corrects the lockup issue.
> >
> >> what information can i collect for debuging this system?
>
> the full dmesg log can help us better understand you problem.
attached is the log.
[-- Attachment #2: full-dmesg.log --]
[-- Type: text/x-log, Size: 11306 bytes --]
Linux version 2.6.0-beta (root-7rVE/Fg9U4Y@public.gmane.org) (gcc version 3.2.3) #4 Fri Dec 19 00:27:04 EST 2003
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
BIOS-e820: 000000000fff0000 - 000000000fffec00 (ACPI data)
BIOS-e820: 000000000fffec00 - 0000000010000000 (ACPI NVS)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
255MB LOWMEM available.
On node 0 totalpages: 65520
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 61424 pages, LIFO batch:14
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
IBM machine detected. Enabling interrupts during APM calls.
IBM machine detected. Disabling SMBus accesses.
ACPI: RSDP (v000 PTLTD ) @ 0x000f7160
ACPI: RSDT (v001 PTLTD RSDT 0x06041080 LTP 0x00000000) @ 0x0fff5309
ACPI: FADT (v001 IBM TP-A21p 0x06041080 0x00000000) @ 0x0fffeb65
ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06041080 LTP 0x00000001) @ 0x0fffebd9
ACPI: DSDT (v001 IBM TP-A21p 0x06041080 MSFT 0x0100000c) @ 0x00000000
Building zonelist for node : 0
Kernel command line: BOOT_IMAGE=Lunar ro root=302
Initializing CPU#0
PID hash table entries: 1024 (order 10: 8192 bytes)
Detected 846.969 MHz processor.
Console: colour dummy device 80x25
Memory: 254084k/262080k available (3220k kernel code, 7268k reserved, 1095k data, 160k init, 0k highmem)
Calibrating delay loop... 1675.26 BogoMIPS
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000
CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040
CPU: Intel Pentium III (Coppermine) stepping 06
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfd94f, last bus=7
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20031002
tbxface-0117 [03] acpi_load_tables : ACPI Tables successfully acquired
Parsing all Control Methods:........................................................................................................................................................................................................................................................................................................................................
Table [DSDT](id F004) - 1092 Objects with 53 Devices 328 Methods 19 Regions
ACPI Namespace successfully loaded at root c0578a1c
ACPI: IRQ 9 was Edge Triggered, setting to Level Triggerd
evxfevnt-0093 [04] acpi_enable : Transition to ACPI mode successful
evgpeblk-0748 [06] ev_create_gpe_block : GPE 00 to 15 [_GPE] 2 regs at 000000000000100C on int 9
Completing Region/Field/Buffer/Package initialization:......................................................................................................................................................................
Initialized 15/19 Regions 81/81 Fields 42/42 Buffers 28/28 Packages (1100 nodes)
Executing all Device _STA and_INI methods:.................................................
49 Devices found containing: 49 _STA, 5 _INI methods
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: Power Resource [PSER] (on)
ACPI: Power Resource [PSIO] (on)
ACPI: Embedded Controller [EC] (gpe 9)
Linux Plug and Play Support v0.97 (c) Adam Belay
SCSI subsystem initialized
Linux Kernel Card Services
options: [pci] [cardbus] [pm]
drivers/usb/core/usb.c: registered new driver usbfs
drivers/usb/core/usb.c: registered new driver hub
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
vesafb: framebuffer at 0xf8000000, mapped to 0xd080f000, size 16384k
vesafb: mode is 1600x1200x24, linelength=4800, pages=1
vesafb: protected mode interface info at c000:647a
vesafb: scrolling: redraw
vesafb: directcolor: size=0:8:8:8, shift=0:16:8:0
fb0: VESA VGA frame buffer device
SBF: ACPI BOOT descriptor is wrong length (39)
SBF: Simple Boot Flag extension found and enabled.
SBF: Setting boot flags 0x1
speedstep-smi: signature:0x47534943, command:0x008200b2, event:0x00c000b3, perf_level:0x07d00000.
speedstep-smi: could not detect low and high frequencies by SMI call.
cpufreq: change to 0 MHz succeded
cpufreq: change to 4 MHz succeded
speedstep-smi: workaround worked.
cpufreq: currently at high speed setting - 850 MHz
ikconfig 0.7 with /proc/config*
devfs: v1.22 (20021013) Richard Gooch (rgooch-r1x6VkxMR+00zabcByZE4g@public.gmane.org)
devfs: boot_options: 0x0
udf: registering filesystem
SGI XFS for Linux with no debug enabled
Initializing Cryptographic API
Limiting direct PCI/PCI transfers.
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Battery Slot [BAT1] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Processor [CPU] (supports C1 C2 C3, 8 throttling states)
ACPI: Thermal Zone [THM0] (51 C)
Console: switching to colour frame buffer device 200x75
pty: 256 Unix98 ptys configured
request_module: failed /sbin/modprobe -- parport_lowlevel. error = -16
lp: driver loaded but no devices found
Generic RTC Driver v1.07
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel 440BX Chipset.
agpgart: Maximum main memory to use for agp memory: 203M
agpgart: AGP aperture is 64M @ 0xf4000000
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
parport0: PC-style at 0x3bc [PCSPP,TRISTATE]
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
lp0: using parport0 (polling).
Using anticipatory io scheduler
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
Intel(R) PRO/100 Network Driver - version 2.3.30-k1
Copyright (c) 2003 Intel Corporation
e100: selftest OK.
e100: eth0: Intel(R) PRO/100 Network Connection
Hardware receive checksums enabled
cpu cycle saver enabled
orinoco.c 0.13e (David Gibson <hermes-xT8FGy+AXnRB3Ne2BGzF6laj5H9X9Tb+@public.gmane.org> and others)
orinoco_cs.c 0.13e (David Gibson <hermes-xT8FGy+AXnRB3Ne2BGzF6laj5H9X9Tb+@public.gmane.org> and others)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 0000:00:07.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1850-0x1857, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x1858-0x185f, BIOS settings: hdc:pio, hdd:pio
hda: IBM-DJSA-232, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 128KiB
hda: 62506080 sectors (32003 MB) w/1874KiB Cache, CHS=65535/15/63, UDMA(33)
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4
Console: switching to colour frame buffer device 200x75
Yenta: CardBus bridge found at 0000:00:02.0 [1014:0130]
Yenta: Using INTVAL to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta: ISA IRQ list 04b8, PCI irq11
Socket status: 30000006
Yenta: CardBus bridge found at 0000:00:02.1 [1014:0130]
Yenta: Using INTVAL to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta: ISA IRQ list 04b8, PCI irq11
Socket status: 30000006
drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: irq 11, io base 00001860
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
drivers/usb/core/usb.c: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
drivers/usb/core/usb.c: registered new driver usb-storage
USB Mass Storage support registered.
drivers/usb/core/usb.c: registered new driver hid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
input: PS/2 Generic Mouse on isa0060/serio1
serio: i8042 AUX port at 0x60,0x64 irq 12
input: AT Translated Set 2 keyboard on isa0060/serio0
serio: i8042 KBD port at 0x60,0x64 irq 1
Advanced Linux Sound Architecture Driver Version 0.9.7 (Thu Sep 25 19:16:36 2003 UTC).
request_module: failed /sbin/modprobe -- snd-card-0. error = -16
specify port
ALSA device list:
#0: Sound Fusion CS46xx at 0xf0122000/0xf0000000, irq 11
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S1 S3 S4 S5)
found reiserfs format "3.6" with standard journal
Reiserfs journal params: device hda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
reiserfs: checking transaction log (hda2) for (hda2)
reiserfs: replayed 16 transactions in 2 seconds
Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 160k freed
Adding 491392k swap on /dev/discs/disc0/part4. Priority:-1 extents:1
Removing [39301 41971 0x0 SD]..done
Removing [39301 38538 0x0 SD]..done
There were 2 uncompleted unlinks/truncates. Completed
XFS mounting filesystem hda3
Ending clean XFS mount for filesystem: hda3
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x170-0x177 0x370-0x377 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
cs: memory probe 0xa0000000-0xa0ffffff: clean.
eth1: Station identity 001f:0001:0007:0034
eth1: Looks like a Lucent/Agere firmware version 7.52
eth1: Ad-hoc demo mode supported
eth1: IEEE standard IBSS ad-hoc mode supported
eth1: WEP supported, 104-bit key
eth1: MAC address 00:02:2D:04:AC:41
eth1: Station name "HERMES I"
eth1: ready
eth1: index 0x01: Vcc 5.0, irq 3, io 0x0100-0x013f
eth1: New link status: Connected (0001)
eth1: New link status: Connected (0001)
^ permalink raw reply [flat|nested] 5+ messages in thread