* tg3 driver does not support S4 mode?
@ 2003-12-26 15:50 John Knottenbelt
[not found] ` <200312261550.16560.jak97-CezfXpuMXD6Fxr2TtlUqVg@public.gmane.org>
0 siblings, 1 reply; 2+ messages in thread
From: John Knottenbelt @ 2003-12-26 15:50 UTC (permalink / raw)
To: Acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f
Hi
I'm running Linux 2.6.0:
On entering S4 I get:
tg3: eth0: Invalid power state (4) requested.
Relevant kernel messages follow below. How hard
do you think it would be to add S4 support for
tg3. What does S4 support involve?
Many thanks
John
=Stopping tasks:
===========================================================================|
Freeing memory: .....................................|
hdc: start_power_step(step: 0)
hdc: completing PM request, suspend
hdb: start_power_step(step: 0)
hdb: completing PM request, suspend
hda: start_power_step(step: 0)
hda: completing PM request, suspend
tg3: eth0: Invalid power state (4) requested.
hda: Wakeup request inited, waiting for !BSY...
hda: start_power_step(step: 1000)
blk: queue dfd39a00, I/O limit 4095Mb (mask 0xffffffff)
hda: completing PM request, resume
hdb: Wakeup request inited, waiting for !BSY...
hdb: start_power_step(step: 1000)
blk: queue dfd39600, I/O limit 4095Mb (mask 0xffffffff)
hdb: completing PM request, resume
hdc: Wakeup request inited, waiting for !BSY...
hdc: start_power_step(step: 1000)
hdc: completing PM request, resume
Restarting tasks... done
atkbd.c: Unknown key released (translated set 2, code 0x6e, data 0xff, on
isa0060/serio0).
-------------------------------------------------------
This SF.net email is sponsored by: IBM Linux Tutorials.
Become an expert in LINUX or just sharpen your skills. Sign up for IBM's
Free Linux Tutorials. Learn everything from the bash shell to sys admin.
Click now! http://ads.osdn.com/?ad_id=1278&alloc_id=3371&op=click
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: tg3 driver does not support S4 mode?
[not found] ` <200312261550.16560.jak97-CezfXpuMXD6Fxr2TtlUqVg@public.gmane.org>
@ 2003-12-26 22:23 ` Pavel Machek
0 siblings, 0 replies; 2+ messages in thread
From: Pavel Machek @ 2003-12-26 22:23 UTC (permalink / raw)
To: John Knottenbelt, Patrick Mochel
Cc: Acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f
Hi!
> I'm running Linux 2.6.0:
>
> On entering S4 I get:
>
> tg3: eth0: Invalid power state (4) requested.
>
> Relevant kernel messages follow below. How hard
> do you think it would be to add S4 support for
> tg3. What does S4 support involve?
Maybe we should be calling device_suspend(*3*) from swsusp.c, because
we want devices to enter D3 state (and they dont care about us
entering S*4*)...
[Patrick, could you comment on that? It is not obvious from quick scan
of documentation].
Pavel
--
When do you have a heart between your knees?
[Johanka's followup: and *two* hearts?]
-------------------------------------------------------
This SF.net email is sponsored by: IBM Linux Tutorials.
Become an expert in LINUX or just sharpen your skills. Sign up for IBM's
Free Linux Tutorials. Learn everything from the bash shell to sys admin.
Click now! http://ads.osdn.com/?ad_id=1278&alloc_id=3371&op=click
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2003-12-26 22:23 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2003-12-26 15:50 tg3 driver does not support S4 mode? John Knottenbelt
[not found] ` <200312261550.16560.jak97-CezfXpuMXD6Fxr2TtlUqVg@public.gmane.org>
2003-12-26 22:23 ` Pavel Machek
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox