From mboxrd@z Thu Jan 1 00:00:00 1970 From: Pavel Machek Subject: Re: S1 could work Date: Thu, 22 Jan 2004 11:29:12 +0100 Sender: acpi-devel-admin-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org Message-ID: <20040122102912.GA355@elf.ucw.cz> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: Errors-To: acpi-devel-admin-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org List-Unsubscribe: , List-Post: List-Help: List-Subscribe: , List-Archive: To: Tod Morrison Cc: acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org List-Id: linux-acpi@vger.kernel.org HI! > Hopefully this is can be done. I have partially functional S1 and S3 > states, in the case of S3 the LCD remains off after resume which I gather > may be a problem for awhile, but I'm patient. The problem with S1 is just > frustrating though, I have no way of powering of (i.e. dpms) from the > console (setterm doesn't work) and S1 doesn't turn off the LCD. This > wasn't a problem under 2.4 since I would just execute 'xset dpms force > off' from within X before suspending. Unfortunately, in 2.6 acpi switches > to a text console to display some messages prior to going into standby > which breaks my only work around. I'd like to know if there's anyway > around this, as it essentially makes 2.6 kernels unusable to me. Switching consoles doing S1 is not neccessary on working hardware. You might want to simply comment it out. Pavel -- When do you have a heart between your knees? [Johanka's followup: and *two* hearts?] ------------------------------------------------------- The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. http://www.eclipsecon.org/osdn