Re: Re: ASUS M6800N: battery0 not present

[Andre Messerschmidt <a.messerschmidt-hi6Y0CQ0nG0@public.gmane.org>]

[-- Attachment #1: Type: text/plain, Size: 5159 bytes --]

Am Mittwoch, 18. Februar 2004 12:11 schrieb Luca Capello:
> Just to avoid mistackes: can you attach you customized compiled DSDT?
> I'll give it a try and report the results.
See attachment.

> As I wrote in the last post, I'll try to correct the new DSDT from BIOS
> 0205A.001: it has just 5 errors, so maybe there're good improvements.
> Anyway, as above, I'd like to try your DSDT in .aml format, compiled by
> you, if you could attach it.
I tried your table with my original BIOS, but then I get errors during 
startup, which is not really suprising since it is another BIOS. 
Here is the boot.msg part: 

<4>    ACPI-0292: *** Info: Table [DSDT] replaced by host OS
<3>schedule_task(): keventd has not started
<3>schedule_task(): keventd has not started
<3>schedule_task(): keventd has not started
<3>schedule_task(): keventd has not started
<4>    ACPI-0398: *** Error: acpi_ev_gpe_dispatch: No handler or method for 
GPE[1C], d
isabling event
<4>    ACPI-1121: *** Error: Method execution failed [\_SB_.LNKA._STA] (Node 
dfeaa620)
, AE_AML_REGION_LIMIT
<4>    ACPI-0098: *** Error: Method execution failed [\_SB_.LNKA._STA] (Node 
dfeaa620)
, AE_AML_REGION_LIMIT
<4>    ACPI-1121: *** Error: Method execution failed [\_SB_.LNKB._STA] (Node 
dfeaa720)
, AE_AML_REGION_LIMIT
<4>    ACPI-0098: *** Error: Method execution failed [\_SB_.LNKB._STA] (Node 
dfeaa720)
, AE_AML_REGION_LIMIT
<4>    ACPI-1121: *** Error: Method execution failed [\_SB_.LNKC._STA] (Node 
dfeaa820)
, AE_AML_REGION_LIMIT
<4>    ACPI-0098: *** Error: Method execution failed [\_SB_.LNKC._STA] (Node 
dfeaa820)
, AE_AML_REGION_LIMIT
<4>    ACPI-1121: *** Error: Method execution failed [\_SB_.LNKD._STA] (Node 
dfeaa920)
, AE_AML_REGION_LIMIT
<4>    ACPI-0098: *** Error: Method execution failed [\_SB_.LNKD._STA] (Node 
dfeaa920)
, AE_AML_REGION_LIMIT
<4>    ACPI-1121: *** Error: Method execution failed [\_SB_.LNKE._STA] (Node 
dfeaaa20)
, AE_AML_REGION_LIMIT
<4>    ACPI-0098: *** Error: Method execution failed [\_SB_.LNKE._STA] (Node 
dfeaaa20)
, AE_AML_REGION_LIMIT
<4>    ACPI-1121: *** Error: Method execution failed [\_SB_.LNKF._STA] (Node 
dfeaab20)
, AE_AML_REGION_LIMIT
<4>    ACPI-0098: *** Error: Method execution failed [\_SB_.LNKF._STA] (Node 
dfeaab20)
, AE_AML_REGION_LIMIT
<4>    ACPI-1121: *** Error: Method execution failed [\_SB_.LNKG._STA] (Node 
dfeaac20)
, AE_AML_REGION_LIMIT
<4>    ACPI-0098: *** Error: Method execution failed [\_SB_.LNKG._STA] (Node 
dfeaac20)
, AE_AML_REGION_LIMIT
<4>    ACPI-1121: *** Error: Method execution failed [\_SB_.LNKH._STA] (Node 
dfeaad20)
, AE_AML_REGION_LIMIT
<4>    ACPI-0098: *** Error: Method execution failed [\_SB_.LNKH._STA] (Node 
dfeaad20)
, AE_AML_REGION_LIMIT
<6>ACPI: Interpreter enabled
<6>ACPI: Using PIC for interrupt routing
<6>ACPI: System [ACPI] (supports S0 S1 S3 S4 S5)
<6>ACPI: PCI Root Bridge [PCI0] (00:00)
<4>PCI: Probing PCI hardware (bus 00)
<6>PCI: Ignoring BAR0-3 of IDE controller 00:1f.1
<4>Transparent bridge - Intel Corp. 82801BAM/CAM/DBM PCI Bridge
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
<6>ACPI: Embedded Controller [EC0] (gpe 28)
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
<4>    ACPI-1121: *** Error: Method execution failed [\_SB_.LNKA._STA] (Node 
dfeaa620), AE_AML_REGION_LIMIT
<4>    ACPI-1121: *** Error: Method execution failed [\_SB_.LNKB._STA] (Node 
dfeaa720), AE_AML_REGION_LIMIT
<4>    ACPI-1121: *** Error: Method execution failed [\_SB_.LNKC._STA] (Node 
dfeaa820), AE_AML_REGION_LIMIT
<4>    ACPI-1121: *** Error: Method execution failed [\_SB_.LNKD._STA] (Node 
dfeaa920), AE_AML_REGION_LIMIT
<4>    ACPI-1121: *** Error: Method execution failed [\_SB_.LNKE._STA] (Node 
dfeaaa20), AE_AML_REGION_LIMIT
<4>    ACPI-1121: *** Error: Method execution failed [\_SB_.LNKF._STA] (Node 
dfeaab20), AE_AML_REGION_LIMIT
<4>    ACPI-1121: *** Error: Method execution failed [\_SB_.LNKG._STA] (Node 
dfeaac20), AE_AML_REGION_LIMIT
<4>    ACPI-1121: *** Error: Method execution failed [\_SB_.LNKH._STA] (Node 
dfeaad20), AE_AML_REGION_LIMIT
<6>ACPI: Power Resource [GFAN] (off)
<6>PCI: Probing PCI hardware
<4>PCI: No IRQ known for interrupt pin A of device 00:1d.0
<4>PCI: No IRQ known for interrupt pin B of device 00:1d.1
<4>PCI: No IRQ known for interrupt pin C of device 00:1d.2
<4>PCI: No IRQ known for interrupt pin D of device 00:1d.7
<4>PCI: No IRQ known for interrupt pin A of device 00:1f.1
<4>PCI: No IRQ known for interrupt pin B of device 00:1f.3
<4>PCI: No IRQ known for interrupt pin B of device 00:1f.5
<4>PCI: No IRQ known for interrupt pin B of device 00:1f.6
<4>PCI: No IRQ known for interrupt pin A of device 01:00.0
<4>PCI: No IRQ known for interrupt pin A of device 02:00.0
<4>PCI: No IRQ known for interrupt pin A of device 02:01.0
<4>PCI: No IRQ known for interrupt pin B of device 02:01.1 - using IRQ 255
<4>PCI: No IRQ known for interrupt pin C of device 02:01.2
<4>PCI: No IRQ known for interrupt pin A of device 02:02.0
<6>PCI: Using ACPI for IRQ routing
<6>PCI: if you experience problems, try using option 'pci=noacpi' or even 
'acpi=off'

regards 
Andre



[-- Attachment #2: dsdt_table.dsl.gz --]
[-- Type: application/x-gzip, Size: 18006 bytes --]