S1 and S3 not working with ide-scsi on Toshiba 3000

S1 and S3 not working with ide-scsi on Toshiba 3000

[Nikolaus Filus]

Hi,

after beeing too long frustrated about not working standby and suspend
on my Tosh3k, I checked all possible drivers for ACPI-support.
Finally I found, that I booted with hdc=ide-scsi and resume was stopping
on talking with hdc.
After changing to ide-cd everything is working fine (on console), even
with uhci-hcd loaded! Tested with 2.6.3.

Is this a known bug or may I add it to bugzilla?


Nikolaus



-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now.
Build and deploy apps & Web services for Linux with
a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click

Re: S1 and S3 not working with ide-scsi on Toshiba 3000

[Pavel Machek]

Hi!

> after beeing too long frustrated about not working standby and suspend
> on my Tosh3k, I checked all possible drivers for ACPI-support.
> Finally I found, that I booted with hdc=ide-scsi and resume was stopping
> on talking with hdc.
> After changing to ide-cd everything is working fine (on console), even
> with uhci-hcd loaded! Tested with 2.6.3.
> 
> Is this a known bug or may I add it to bugzilla?
> 

This is likely ide driver problem => talk to ide people.
				Pavel
-- 
64 bytes from 195.113.31.123: icmp_seq=28 ttl=51 time=448769.1 ms         



-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now.
Build and deploy apps & Web services for Linux with
a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click

Re: S1 and S3 not working with ide-scsi on Toshiba 3000

[Bruno Ducrot]

On Tue, Feb 24, 2004 at 03:17:15PM +0100, Nikolaus Filus wrote:
> Hi,
> 
> after beeing too long frustrated about not working standby and suspend
> on my Tosh3k, I checked all possible drivers for ACPI-support.
> Finally I found, that I booted with hdc=ide-scsi and resume was stopping
> on talking with hdc.
> After changing to ide-cd everything is working fine (on console), even
> with uhci-hcd loaded! Tested with 2.6.3.
> 
> Is this a known bug or may I add it to bugzilla?
> 

For me, yes.  Never had time to fix this ok, and worst I don't have
anymore a toshiba 3000 by now.  The problem (on kernel 2.4) was that
the ide hwif is not properly restored so that DMA do not worked any
more.  A little hack permit to get it ok (I think I put it on the
acpi.sf.net with the toshiba 3000-100 dsdt).

-- 
Bruno Ducrot

--  Which is worse:  ignorance or apathy?
--  Don't know.  Don't care.


-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now.
Build and deploy apps & Web services for Linux with
a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click