Re: Several problems with sleep states

[Bruno Ducrot <ducrot-kk6yZipjEM5g9hUCZPvPmw@public.gmane.org>]

On Fri, Feb 27, 2004 at 10:19:37AM +0100, Nicolas Sabouret wrote:
> Hi,
> 
> following problems:
> 1. echo -n "disk" > /sys/power/state => nothing happens
> 2. echo -n "mem" > /sys/power/state => the computer enters "suspend on 
> ram" mode (the suspend light gets on, etc...) when I try to wake up the 
> computer, it hangs (some noise indicating that the disks are woken up 
> and then nothing but a blank screen, even starting from console).

You should try with swsusp instead and with /proc/acpi/sleep by now.
pmdisk apparently does support only S4BIOS (and you don't have s4bios,
looking the dmesg), not S4.

> 
> 3. It has certainly nothing to do with what I said before, but I cannot 
> find a /proc/acpi/processor/CPU0/performance (I have all the other files 
> you mention in your Documentation section).

It has been deprecated.  Look at /sys/devices/system/cpu0/cpufreq instead.

Cheers,

-- 
Bruno Ducrot

--  Which is worse:  ignorance or apathy?
--  Don't know.  Don't care.


-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now.
Build and deploy apps & Web services for Linux with
a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click