From: Frank Fiene <ffiene-MDAluyXF630@public.gmane.org>
To: acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
Subject: Problems with Thinkpad A31p
Date: Mon, 1 Mar 2004 09:01:25 +0100 [thread overview]
Message-ID: <200403010901.25316.ffiene@veka.com> (raw)
Hi,
i have problems using my A31p with the docking station since 2.6.2-ac3 of
the linux kernel.
I am using SuSE 9.0 and had to start with acpi=off, if i load kernel
2.4.*.
After upgrading to 2.6, i tried some things and i found the DSDT file for
the A31 on acpi.sf.net. I am quiet happy with this but if i connect my
Thinkpad to the docking station, USB doesn't work.
dmesg says:
BIOS-e820: 000000002ff70000 - 000000002ff7e000 (ACPI data)
BIOS-e820: 000000002ff7e000 - 000000002ff80000 (ACPI NVS)
ACPI: RSDP (v002 IBM ) @ 0x000f7040
ACPI: XSDT (v001 IBM TP-1N 0x00001030 LTP 0x00000000) @ 0x2ff72e02
ACPI: FADT (v001 IBM TP-1N 0x00001030 IBM 0x00000001) @ 0x2ff72e4e
ACPI: SSDT (v001 IBM TP-1N 0x00001030 MSFT 0x0100000d) @ 0x2ff72f02
ACPI: ECDT (v001 IBM TP-1N 0x00001030 IBM 0x00000001) @ 0x2ff7df54
ACPI: TCPA (v001 IBM TP-1N 0x00001030 PTL 0x00000001) @ 0x2ff7dfa6
ACPI: BOOT (v001 IBM TP-1N 0x00001030 LTP 0x00000001) @ 0x2ff7dfd8
ACPI: DSDT (v001 IBM TP-1N 0x00001030 MSFT 0x0100000d) @ 0x00000000
ACPI: PM-Timer IO Port: 0x1008
ACPI: Subsystem revision 20040211
ACPI: IRQ9 SCI: Edge set to Level Trigger.
ACPI: Found ECDT
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11)
ACPI: PCI Root Bridge [PCI0] (00:00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Embedded Controller [EC] (gpe 28)
ACPI: Power Resource [PUBS] (on)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1.DOCK._PRT]
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
PCI: Using ACPI for IRQ routing
apm: overridden by ACPI.
ACPI: (supports S0 S3 S4 S5)
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Battery Slot [BAT1] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Processor [CPU] (supports C1 C2 C3, 8 throttling states)
ACPI: Thermal Zone [THM0] (30 C)
Any suggestions?
--
uniorg Solutions GmbH - Märkische Strasse 237 - 44141 Dortmund
ffiene-MDAluyXF630@public.gmane.org - Tel:0231-9497-262
--
Ein Unternehmen der uniorg-Gruppe
-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now.
Build and deploy apps & Web services for Linux with
a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click
reply other threads:[~2004-03-01 8:01 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200403010901.25316.ffiene@veka.com \
--to=ffiene-mdaluyxf630@public.gmane.org \
--cc=acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox