* AE_ALREADY_EXISTS bug still here
@ 2004-04-03 18:45 Jerome Poggi
0 siblings, 0 replies; 2+ messages in thread
From: Jerome Poggi @ 2004-04-03 18:45 UTC (permalink / raw)
To: acpi-devel-TtF/mJH4Jtrk1uMJSBkQmQ
[-- Attachment #1: Type: text/plain, Size: 3548 bytes --]
Hi all,
I get one bug :
Apr 3 20:12:03 efflam ACPI-0279: *** Error: Looking up [BUFF] in namespace, AE_ALREADY_EXISTS
Apr 3 20:12:03 efflam ACPI-1133: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node c12d0f60), AE_ALREADY_EXISTS
But i had the last kernel version and the last ACPI patch :
root-mvppoxjXWBo@public.gmane.org:/proc # cat version
Linux version 2.6.4-hardened-r3 (root-mvppoxjXWBo@public.gmane.org) (gcc version 3.3.3 20040217 (Gentoo Linux 3.3.3, propolice-3.3-7)) #5 Fri Apr 2 15:32:48 CEST 2004
root-mvppoxjXWBo@public.gmane.org:/proc/acpi # cat info
version: 20040326
# biosdecode 2.3
ACPI 1.0 present.
OEM Identifier: TOSHIB
RSD Table 32-bit Address: 0x0FF60000
PCI Interrupt Routing 1.0 present.
Router ID: 00:1f.0
Exclusive IRQs: None
Compatible Router: 8086:122e
Slot Entry 1: ID 00:1f, on-board
Slot Entry 2: ID 02:07, on-board
Slot Entry 3: ID 02:0d, on-board
Slot Entry 4: ID 02:08, on-board
Slot Entry 5: ID 01:00, on-board
Slot Entry 6: ID 02:0c, on-board
Slot Entry 7: ID 02:0a, slot number 1
Slot Entry 8: ID 02:0b, slot number 2
Slot Entry 9: ID 02:01, slot number 3
BIOS32 Service Directory present.
Revision: 0
Calling Interface Address: 0x000FC34A
SMBIOS 2.3 present.
Structure Table Length: 1380 bytes
Structure Table Address: 0x000EC000
Number Of Structures: 43
Maximum Structure Size: 92 bytes
SYSID present.
Revision: 0
Structure Table Address: 0x000F03A0
Number Of Structures: 1
PNP BIOS 1.0 present.
Event Notification: Polling
Event Notification Flag Address: 0x00000510
Real Mode 16-bit Code Address: F000:914B
Real Mode 16-bit Data Address: 0000:0000
16-bit Protected Mode Code Address: 0x000F9168
16-bit Protected Mode Data Address: 0x00000000
OEM Device Identifier: TOS3500
/proc/acpi/battery/BAT2/alarm
alarm: 64 mAh
---
/proc/acpi/battery/BAT2/state
present: yes
capacity state: ok
charging state: charging
present rate: 810 mA
remaining capacity: 2283 mAh
present voltage: 10930 mV
---
/proc/acpi/battery/BAT2/info
present: yes
design capacity: 3400 mAh
last full capacity: 3168 mAh
battery technology: rechargeable
design voltage: 10800 mV
design capacity warning: 64 mAh
design capacity low: 0 mAh
capacity granularity 1: 1 mAh
capacity granularity 2: 1 mAh
model number: P71022002112
serial number: 1000172838
battery type: Li-ION
OEM info:
---
/proc/acpi/battery/BAT1/alarm
alarm: 68 mAh
---
/proc/acpi/battery/BAT1/state
present: yes
capacity state: ok
charging state: unknown
present rate: 786 mA
remaining capacity: 3400 mAh
present voltage: 11270 mV
---
/proc/acpi/battery/BAT1/info
present: yes
design capacity: 3600 mAh
last full capacity: 3400 mAh
battery technology: rechargeable
design voltage: 10800 mV
design capacity warning: 68 mAh
design capacity low: 0 mAh
capacity granularity 1: 1 mAh
capacity granularity 2: 1 mAh
model number: XM2030P02
serial number: 1000010554
battery type: Li-ION
OEM info:
---
My dmesg and DSDT are in attached piece.
Jerome.
[-- Attachment #2: dmesg.txt --]
[-- Type: text/plain, Size: 20934 bytes --]
Linux version 2.6.4-hardened-r3 (root-mvppoxjXWBo@public.gmane.org) (gcc version 3.3.3 20040217 (Gentoo Linux 3.3.3, propolice-3.3-7)) #5 Fri Apr 2 15:32:48 CEST 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 00000000000eee00 (reserved)
BIOS-e820: 00000000000eee00 - 00000000000ef000 (ACPI NVS)
BIOS-e820: 00000000000ef000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000ff60000 (usable)
BIOS-e820: 000000000ff60000 - 000000000ff70000 (ACPI data)
BIOS-e820: 000000000ff70000 - 0000000010000000 (reserved)
BIOS-e820: 00000000feea0000 - 00000000feec0000 (reserved)
BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
255MB LOWMEM available.
On node 0 totalpages: 65376
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 61280 pages, LIFO batch:14
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 TOSHIB ) @ 0x000f01b0
ACPI: RSDT (v001 TOSHIB 750 0x00970814 TASM 0x04010000) @ 0x0ff60000
ACPI: FADT (v001 TOSHIB 750 0x00970814 TASM 0x04010000) @ 0x0ff60054
ACPI: DSDT (v001 TOSHIB 8200 0x20001220 MSFT 0x0100000a) @ 0x00000000
ACPI: PM-Timer IO Port: 0xee08
Built 1 zonelists
Kernel command line: BOOT_IMAGE=Linux264 ro root=305 pmdisk=/dev/hda1 resume=/dev/hda1 pci=noacpi pci=usepirqmask
Initializing CPU#0
PID hash table entries: 1024 (order 10: 8192 bytes)
Detected 847.620 MHz processor.
Using pmtmr for high-res timesource
Console: colour dummy device 80x25
Memory: 254056k/261504k available (2939k kernel code, 6724k reserved, 371k data, 164k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 1679.36 BogoMIPS
Security Scaffold v1.0.0 initialized
Capability LSM initialized
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000
CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After all inits, caps: 0383f1ff 00000000 00000000 00000040
CPU: Intel Pentium III (Coppermine) stepping 06
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfda51, last bus=14
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: IRQ9 SCI: Level Trigger.
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.PCIB.MPC0._PRW] (Node c12d4e20), AE_NOT_EXIST
ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.PCIB.MPC0._PRW] (Node c12d4e20), AE_NOT_EXIST
ACPI-0165: *** Error: No object was returned from [\_SB_.LNKA._STA] (Node cff5e820), AE_NOT_EXIST
ACPI-0165: *** Error: No object was returned from [\_SB_.LNKB._STA] (Node cff5e920), AE_NOT_EXIST
ACPI-0165: *** Error: No object was returned from [\_SB_.LNKC._STA] (Node cff4c5a0), AE_NOT_EXIST
ACPI-0165: *** Error: No object was returned from [\_SB_.LNKD._STA] (Node cff4c4a0), AE_NOT_EXIST
ACPI-0165: *** Error: No object was returned from [\_SB_.LNKE._STA] (Node cff4c3a0), AE_NOT_EXIST
ACPI-0165: *** Error: No object was returned from [\_SB_.LNKH._STA] (Node cff4c2a0), AE_NOT_EXIST
ACPI-0165: *** Error: No object was returned from [\_SB_.PCI0.FNC0.FDD_._STA] (Node c12d3ae0), AE_NOT_EXIST
ACPI-0165: *** Error: No object was returned from [\_SB_.PCI0.FNC0.COM_._STA] (Node c12d39a0), AE_NOT_EXIST
ACPI-0165: *** Error: No object was returned from [\_SB_.PCI0.FNC0.FSIR._STA] (Node c12d2820), AE_NOT_EXIST
ACPI-0165: *** Error: No object was returned from [\_SB_.PCI0.FNC0.PRT_._STA] (Node c12d26e0), AE_NOT_EXIST
ACPI-0165: *** Error: No object was returned from [\_SB_.PCI0.FNC0.PRT1._STA] (Node c12d2600), AE_NOT_EXIST
ACPI-0165: *** Error: No object was returned from [\_SB_.PCI0.FNC0.PCC0._STA] (Node c12d2500), AE_NOT_EXIST
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: Power Resource [PIHD] (on)
ACPI: Power Resource [PMHD] (off)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: Power Resource [PFAN] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
SCSI subsystem initialized
PCI: Probing PCI hardware
PCI: Using IRQ router PIIX/ICH [8086/244c] at 0000:00:1f.0
PCI: Found IRQ 11 for device 0000:02:0c.0
PCI: Sharing IRQ 11 with 0000:01:00.0
PCI: Sharing IRQ 11 with 0000:02:0d.0
PCI: Found IRQ 11 for device 0000:02:0d.1
PCI: Sharing IRQ 11 with 0000:00:1f.2
PCI: Sharing IRQ 11 with 0000:02:07.0
vesafb: framebuffer at 0xfc000000, mapped to 0xd0809000, size 16384k
vesafb: mode is 1024x768x8, linelength=1024, pages=20
vesafb: protected mode interface info at c000:76ee
vesafb: scrolling: redraw
fb0: VESA VGA frame buffer device
vga16fb: initializing
vga16fb: mapped to 0xc00a0000
fb1: VGA16 VGA frame buffer device
ikconfig 0.7 with /proc/config*
devfs: 2004-01-31 Richard Gooch (rgooch-r1x6VkxMR+00zabcByZE4g@public.gmane.org)
devfs: boot_options: 0x1
Installing knfsd (copyright (C) 1996 okir-pn4DOG8n3UYbFoVRYvo4fw@public.gmane.org).
NTFS driver 2.1.6 [Flags: R/W].
udf: registering filesystem
Initializing Cryptographic API
Console: switching to colour frame buffer device 128x48
lp: driver loaded but no devices found
Real Time Clock Driver v1.12
hw_random hardware driver 1.0.0 loaded
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel i815 Chipset, but could not find the secondary device.
agpgart: Detected an Intel i815 Chipset.
agpgart: Maximum main memory to use for agp memory: 203M
agpgart: AGP aperture is 64M @ 0xf0000000
[drm] Initialized i810 1.4.0 20030605 on minor 0
[drm] Initialized i830 1.3.2 20021108 on minor 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
PCI: Found IRQ 11 for device 0000:00:1f.6
Using anticipatory io scheduler
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw-5bpFXmC1L3aJ4eUNlOKu3Q@public.gmane.org> and others
PCI: Found IRQ 11 for device 0000:02:08.0
eth0: OEM i82557/i82558 10/100 Ethernet, 00:00:39:D1:D0:2E, IRQ 11.
Board assembly 000000-000, Physical connectors present: RJ45
Primary interface chip i82555 PHY #1.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0x04f4518b).
e100: Intel(R) PRO/100 Network Driver, 3.0.16
e100: Copyright(c) 1999-2004 Intel Corporation
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH2M: IDE controller at PCI slot 0000:00:1f.1
ICH2M: chipset revision 3
ICH2M: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xcff0-0xcff7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xcff8-0xcfff, BIOS settings: hdc:pio, hdd:pio
hda: TOSHIBA MK2016GAP, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 128KiB
hda: 39070080 sectors (20003 MB), CHS=38760/16/63, UDMA(66)
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 p6 p7 p8 p9 p10 p11 p12 p13 >
Console: switching to colour frame buffer device 128x48
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
input: ImPS/2 Logitech Wheel Mouse on isa0060/serio1
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
ip_conntrack version 2.1 (2043 buckets, 16344 max) - 296 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_recent v0.3.1: Stephen Frost <sfrost-vhD3WmCyG/PR7s880joybQ@public.gmane.org>. http://snowman.net/projects/ipt_recent/
arp_tables: (C) 2002 David S. Miller
NET: Registered protocol family 1
NET: Registered protocol family 17
Resume Machine: resuming from /dev/hda1
Resuming from device hda1
Resume Machine: This is normal swap space
PM: Reading pmdisk image.
PM: Resume from disk failed.
ACPI: (supports S0 S1 S3 S4 S4bios S5)
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
(fs/jbd/recovery.c, 252): journal_recover: JBD: recovery, exit status 0, recovered transactions 95361 to 95388
(fs/jbd/recovery.c, 254): journal_recover: JBD: Replayed 183 and revoked 4/8 blocks
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 164k freed
Adding 257000k swap on /dev/hda1. Priority:-1 extents:1
Unable to find swap-space signature
EXT3 FS on hda5, internal journal
loop: loaded (max 8 devices)
found reiserfs format "3.6" with standard journal
Reiserfs journal params: device hda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
reiserfs: checking transaction log (hda6) for (hda6)
reiserfs: replayed 14 transactions in 1 seconds
Using r5 hash to sort names
found reiserfs format "3.6" with standard journal
Reiserfs journal params: device hda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
reiserfs: checking transaction log (hda7) for (hda7)
Using r5 hash to sort names
found reiserfs format "3.6" with standard journal
Reiserfs journal params: device hda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
reiserfs: checking transaction log (hda8) for (hda8)
Using r5 hash to sort names
found reiserfs format "3.6" with standard journal
Reiserfs journal params: device hda9, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
reiserfs: checking transaction log (hda9) for (hda9)
reiserfs: replayed 25 transactions in 1 seconds
Using r5 hash to sort names
Removing [1945 24914 0x0 SD]..done
Removing [1945 24913 0x0 SD]..done
Removing [1945 24912 0x0 SD]..done
There were 3 uncompleted unlinks/truncates. Completed
found reiserfs format "3.6" with standard journal
Reiserfs journal params: device hda10, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
reiserfs: checking transaction log (hda10) for (hda10)
reiserfs: replayed 2 transactions in 0 seconds
Using r5 hash to sort names
found reiserfs format "3.6" with standard journal
Reiserfs journal params: device hda11, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
reiserfs: checking transaction log (hda11) for (hda11)
Using r5 hash to sort names
found reiserfs format "3.6" with standard journal
Reiserfs journal params: device hda12, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
reiserfs: checking transaction log (hda12) for (hda12)
Using r5 hash to sort names
drivers/usb/core/usb.c: registered new driver usbfs
drivers/usb/core/usb.c: registered new driver hub
Unable to find swap-space signature
Linux Kernel Card Services
options: [pci] [cardbus] [pm]
Databook TCIC-2 PCMCIA probe: not found.
PCI: Enabling device 0000:02:0c.0 (0000 -> 0002)
PCI: Found IRQ 11 for device 0000:02:0c.0
PCI: Sharing IRQ 11 with 0000:01:00.0
PCI: Sharing IRQ 11 with 0000:02:0d.0
Yenta: CardBus bridge found at 0000:02:0c.0 [12a3:ab01]
Yenta: Enabling burst memory read transactions
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta: ISA IRQ mask 0x0000, PCI irq 11
Socket status: 30000011
PCI: Enabling device 0000:02:0d.0 (0000 -> 0002)
PCI: Found IRQ 11 for device 0000:02:0d.0
PCI: Sharing IRQ 11 with 0000:01:00.0
PCI: Sharing IRQ 11 with 0000:02:0c.0
Yenta: CardBus bridge found at 0000:02:0d.0 [1179:0001]
Yenta: ISA IRQ mask 0x04b8, PCI irq 11
Socket status: 30000007
PCI: Enabling device 0000:02:0d.1 (0000 -> 0002)
PCI: Found IRQ 11 for device 0000:02:0d.1
PCI: Sharing IRQ 11 with 0000:00:1f.2
PCI: Sharing IRQ 11 with 0000:02:07.0
Yenta: CardBus bridge found at 0000:02:0d.1 [1179:0001]
Yenta: ISA IRQ mask 0x04b8, PCI irq 11
Socket status: 30000007
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x170-0x177 0x370-0x377 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
cs: memory probe 0xa0000000-0xa0ffffff: clean.
orinoco.c 0.13e (David Gibson <hermes-xT8FGy+AXnRB3Ne2BGzF6laj5H9X9Tb+@public.gmane.org> and others)
orinoco_cs.c 0.13e (David Gibson <hermes-xT8FGy+AXnRB3Ne2BGzF6laj5H9X9Tb+@public.gmane.org> and others)
eth1: Station identity 001f:0001:0006:000e
eth1: Looks like a Lucent/Agere firmware version 6.14
eth1: Ad-hoc demo mode supported
eth1: IEEE standard IBSS ad-hoc mode supported
eth1: WEP supported, 104-bit key
eth1: MAC address 00:02:2D:11:98:15
eth1: Station name "HERMES I"
eth1: ready
eth1: index 0x01: Vcc 3.3, irq 11, io 0x0100-0x013f
USB Universal Host Controller Interface driver v2.2
PCI: Found IRQ 11 for device 0000:00:1f.2
PCI: Sharing IRQ 11 with 0000:02:07.0
PCI: Sharing IRQ 11 with 0000:02:0d.1
uhci_hcd 0000:00:1f.2: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1f.2 to 64
uhci_hcd 0000:00:1f.2: irq 11, io base 0000cf80
uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
PCI: Found IRQ 11 for device 0000:00:1f.4
uhci_hcd 0000:00:1f.4: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1f.4 to 64
uhci_hcd 0000:00:1f.4: irq 11, io base 0000cf60
uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usb 1-1: new full speed USB device using address 2
drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic
drivers/usb/core/usb.c: registered new driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0
drivers/usb/serial/usb-serial.c: USB Serial support registered for PL-2303
pl2303 1-1:1.0: PL-2303 converter detected
usb 1-1: PL-2303 converter now attached to ttyUSB0 (or usb/tts/0 for devfs)
drivers/usb/core/usb.c: registered new driver pl2303
drivers/usb/serial/pl2303.c: Prolific PL2303 USB to serial adaptor driver v0.10
usb 1-2: new low speed USB device using address 3
PCI: Found IRQ 11 for device 0000:02:07.0
PCI: Sharing IRQ 11 with 0000:00:1f.2
PCI: Sharing IRQ 11 with 0000:02:0d.1
input: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:1f.2-2
drivers/usb/core/usb.c: registered new driver hid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 64 td 64
process `named' is using obsolete setsockopt SO_BSDCOMPAT
toshiba_acpi: Toshiba Laptop ACPI Extras version 0.18
toshiba_acpi: HCI method: \_SB_.VALD.GHCI
ACPI: Processor [CPU0] (supports C1 C2)
ACPI: Thermal Zone [THRM] (48 C)
ACPI: Fan [FAN] (off)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: Battery Slot [BAT1] (battery present)
ACPI: Battery Slot [BAT2] (battery present)
ACPI: AC Adapter [ADP1] (on-line)
Toshiba System Managment Mode driver v1.11 26/9/2001
atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0).
atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.
atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0).
atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.
prism2cs_init: prism2_cs.o: 0.2.1-pre20 Loaded
prism2cs_init: dev_info is: prism2_cs
prism2_cs: index 0x01: Vcc 3.3, irq 3, io 0x0180-0x01bf
PDA Read from 0x007f0000 in EXTDS space.
PDA Read from 0x007f0000 in EXTDS space.
ident: nic h/w: id=0x800c 1.0.0
ident: pri f/w: id=0x15 1.1.1
ident: sta f/w: id=0x1f 1.7.4
MFI:SUP:role=0x00:id=0x01:var=0x01:b/t=1/1
CFI:SUP:role=0x00:id=0x02:var=0x02:b/t=1/1
PRI:SUP:role=0x00:id=0x03:var=0x01:b/t=4/4
STA:SUP:role=0x00:id=0x04:var=0x01:b/t=1/12
PRI-CFI:ACT:role=0x01:id=0x02:var=0x02:b/t=1/1
STA-CFI:ACT:role=0x01:id=0x02:var=0x02:b/t=1/1
STA-MFI:ACT:role=0x01:id=0x01:var=0x01:b/t=1/1
Prism2 card SN: 00034033748\x0a
device wlan0 entered promiscuous mode
monitor mode enabled
device wlan0 left promiscuous mode
monitor mode disabled
dot11req_reset: the macaddress and setdefaultmib arguments are currently unsupported.
dot11req_reset: the macaddress and setdefaultmib arguments are currently unsupported.
device wlan0 entered promiscuous mode
monitor mode enabled
device wlan0 left promiscuous mode
monitor mode disabled
device wlan0 entered promiscuous mode
monitor mode enabled
eth1: New link status: Connected (0001)
device wlan0 left promiscuous mode
monitor mode disabled
hfa384x_docmd_wait: hfa384x_cmd timeout(1), reg=0xffff.
hfa384x_cmd_access: Call to hfa384x_docmd_wait failed (-110 0)
prism2sta_mlmerequest: Failed to read wlan0 statistics: error=-110
hfa384x_docmd_wait: hfa384x_cmd timeout(1), reg=0xffff.
hfa384x_cmd_access: Call to hfa384x_docmd_wait failed (-110 0)
prism2sta_mlmerequest: Failed to read wlan0 statistics: error=-110
hfa384x_docmd_wait: hfa384x_cmd timeout(1), reg=0xffff.
dev_mc_discard: multicast leakage! dmi_users=3
hfa384x_docmd_wait: hfa384x_cmd timeout(1), reg=0xffff.
prism2_cs.o: 0.2.1-pre20 Unloaded
p80211.o: 0.2.1-pre20 Unloaded
grsec: mount /dev/loop0 to /home/poggi/Mail/crypted by /bin/mount[mount:12196] uid/euid:1000/0 gid/egid:1000/1000, parent /home/poggi/bin/fetchmail[fetchmail:29254] uid/euid:1000/1000 gid/egid:1000/1000
grsec: mount /dev/loop1 to /home/poggi/Mail/clients by /bin/mount[mount:22226] uid/euid:1000/0 gid/egid:1000/1000, parent /home/poggi/bin/fetchmail[fetchmail:8931] uid/euid:1000/1000 gid/egid:1000/1000
grsec: mount /dev/loop2 to /home/poggi/clients by /bin/mount[mount:25007] uid/euid:1000/0 gid/egid:1000/1000, parent /home/poggi/bin/fetchmail[fetchmail:7248] uid/euid:1000/1000 gid/egid:1000/1000
eth1: New link status: AP Out of Range (0004)
eth1: New link status: AP In Range (0005)
eth1: New link status: Disconnected (0002)
eth1: New link status: Connected (0001)
ttyUSB0: 1 input overrun(s)
usb 1-2: USB disconnect, address 3
usb 1-2: new low speed USB device using address 4
input: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:1f.2-2
usb 1-1: USB disconnect, address 2
pl2303 1-1:1.0: device disconnected
PL-2303 ttyUSB0: PL-2303 converter now disconnected from ttyUSB0
usb 1-1: new full speed USB device using address 5
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
Vendor: LEXAR Model: JUMPDRIVE Rev: 1.20
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sda: 251904 512-byte hdwr sectors (129 MB)
sda: assuming Write Enabled
sda: assuming drive cache: write through
/dev/scsi/host0/bus0/target0/lun0: p1
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 5
drivers/usb/core/usb.c: registered new driver usb-storage
USB Mass Storage support registered.
grsec: mount /dev/sda1 to /mnt/usbdsk by /bin/mount[mount:20214] uid/euid:1000/0 gid/egid:1000/1000, parent /bin/bash[bash:12515] uid/euid:1000/1000 gid/egid:1000/1000
VFS: Can't find ext2 filesystem on dev loop3.
grsec: mount /dev/loop3 to /home/poggi/perso by /bin/mount[mount:18734] uid/euid:1000/0 gid/egid:1000/1000, parent /bin/bash[bash:8954] uid/euid:1000/1000 gid/egid:1000/1000
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
PPP BSD Compression module registered
PPP Deflate Compression module registered
grsec: unmount of /dev/sda1 by /bin/umount[umount:5716] uid/euid:1000/0 gid/egid:1000/1000, parent /bin/bash[sh:10709] uid/euid:1000/1000 gid/egid:1000/1000
usb 1-1: USB disconnect, address 5
ACPI-0279: *** Error: Looking up [BUFF] in namespace, AE_ALREADY_EXISTS
ACPI-1133: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node c12d0f60), AE_ALREADY_EXISTS
[-- Attachment #3: dsdt.gz --]
[-- Type: application/x-gunzip, Size: 46752 bytes --]
^ permalink raw reply [flat|nested] 2+ messages in thread
* RE: AE_ALREADY_EXISTS bug still here
@ 2004-04-05 15:28 Moore, Robert
0 siblings, 0 replies; 2+ messages in thread
From: Moore, Robert @ 2004-04-05 15:28 UTC (permalink / raw)
To: Jerome Poggi, acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f
However, you should only get the error once. After that, the method is
forced to "Serialized".
Bob
-----Original Message-----
From: acpi-devel-admin-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
[mailto:acpi-devel-admin-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org] On Behalf Of Jerome
Poggi
Sent: Saturday, April 03, 2004 10:45 AM
To: acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
Subject: [ACPI] AE_ALREADY_EXISTS bug still here
Hi all,
I get one bug :
Apr 3 20:12:03 efflam ACPI-0279: *** Error: Looking up [BUFF] in
namespace, AE_ALREADY_EXISTS
Apr 3 20:12:03 efflam ACPI-1133: *** Error: Method execution failed
[\_SB_.BAT1._BST] (Node c12d0f60), AE_ALREADY_EXISTS
But i had the last kernel version and the last ACPI patch :
root-mvppoxjXWBo@public.gmane.org:/proc # cat version
Linux version 2.6.4-hardened-r3 (root-mvppoxjXWBo@public.gmane.org) (gcc version 3.3.3
20040217 (Gentoo Linux 3.3.3, propolice-3.3-7)) #5 Fri Apr 2 15:32:48
CEST 2004
root-mvppoxjXWBo@public.gmane.org:/proc/acpi # cat info
version: 20040326
# biosdecode 2.3
ACPI 1.0 present.
OEM Identifier: TOSHIB
RSD Table 32-bit Address: 0x0FF60000
PCI Interrupt Routing 1.0 present.
Router ID: 00:1f.0
Exclusive IRQs: None
Compatible Router: 8086:122e
Slot Entry 1: ID 00:1f, on-board
Slot Entry 2: ID 02:07, on-board
Slot Entry 3: ID 02:0d, on-board
Slot Entry 4: ID 02:08, on-board
Slot Entry 5: ID 01:00, on-board
Slot Entry 6: ID 02:0c, on-board
Slot Entry 7: ID 02:0a, slot number 1
Slot Entry 8: ID 02:0b, slot number 2
Slot Entry 9: ID 02:01, slot number 3
BIOS32 Service Directory present.
Revision: 0
Calling Interface Address: 0x000FC34A
SMBIOS 2.3 present.
Structure Table Length: 1380 bytes
Structure Table Address: 0x000EC000
Number Of Structures: 43
Maximum Structure Size: 92 bytes
SYSID present.
Revision: 0
Structure Table Address: 0x000F03A0
Number Of Structures: 1
PNP BIOS 1.0 present.
Event Notification: Polling
Event Notification Flag Address: 0x00000510
Real Mode 16-bit Code Address: F000:914B
Real Mode 16-bit Data Address: 0000:0000
16-bit Protected Mode Code Address: 0x000F9168
16-bit Protected Mode Data Address: 0x00000000
OEM Device Identifier: TOS3500
/proc/acpi/battery/BAT2/alarm
alarm: 64 mAh
---
/proc/acpi/battery/BAT2/state
present: yes
capacity state: ok
charging state: charging
present rate: 810 mA
remaining capacity: 2283 mAh
present voltage: 10930 mV
---
/proc/acpi/battery/BAT2/info
present: yes
design capacity: 3400 mAh
last full capacity: 3168 mAh
battery technology: rechargeable
design voltage: 10800 mV
design capacity warning: 64 mAh
design capacity low: 0 mAh
capacity granularity 1: 1 mAh
capacity granularity 2: 1 mAh
model number: P71022002112
serial number: 1000172838
battery type: Li-ION
OEM info:
---
/proc/acpi/battery/BAT1/alarm
alarm: 68 mAh
---
/proc/acpi/battery/BAT1/state
present: yes
capacity state: ok
charging state: unknown
present rate: 786 mA
remaining capacity: 3400 mAh
present voltage: 11270 mV
---
/proc/acpi/battery/BAT1/info
present: yes
design capacity: 3600 mAh
last full capacity: 3400 mAh
battery technology: rechargeable
design voltage: 10800 mV
design capacity warning: 68 mAh
design capacity low: 0 mAh
capacity granularity 1: 1 mAh
capacity granularity 2: 1 mAh
model number: XM2030P02
serial number: 1000010554
battery type: Li-ION
OEM info:
---
My dmesg and DSDT are in attached piece.
Jerome.
-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id\x1470&alloc_id638&op=click
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2004-04-05 15:28 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-04-03 18:45 AE_ALREADY_EXISTS bug still here Jerome Poggi
-- strict thread matches above, loose matches on Subject: below --
2004-04-05 15:28 Moore, Robert
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox