From: Jacek Kawa <jfk-am85oNWwv3KkuDHyt5Lh4DtUAC2U4X/S@public.gmane.org>
To: acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: 2.6/2.4, ACPI, Compaq Armada 110, freeze while booting
Date: Sun, 18 Apr 2004 03:00:00 +0200 [thread overview]
Message-ID: <20040418005959.GA15475@finwe.eu.org> (raw)
Hi!
(I'm not subscribed to acpi-devel@ so CC me)
I've got problem with making Linux with ACPI enabled
work with Compaq Armada 110.
o 2.6.6-rc1 log (written down):
-------------------------------
ACPI: Subsystem revision 20040326
tbxface-0117 [03] acpi_load_tables : ACPI Tables successfully acquired
Parsing all Control Methods:.................................................... ...
Table [DSDT](id F004) - 398 Objects with 38 Devices 122 Methods 13 Regions
ACPI Namespace successfully loaded at root c03851bc
ACPI: IRQ10 SCI: Edge set to Level Trigger.
evxfevnt-0093 [04] acpi_enable : Transition to ACPI mode successful
evgpeblk-0867 [06] ev_create_gpe_block : GPE 00 to 15 [_GPE] 2 regs at 0000000000008020 on int 10
evgpeblk-0925 [06] ev_create_gpe_block : Found 0 Wake, Enabled 5 Runtime GPEs in this block
Completing Region/Field/Buffer/Package initialization:................................ ...
Initialized 13/13 Regions 1/1 Fields 22/22 Buffers 19/19 Packages (407 nodes)
Executing all Device _STA and_INI methods: ..........[ACPI Debug] String: Length 0x30, "--------- VIA SOFTWARE SMI PMIO 2Fh ------------"
And then OS freezes. pci=noacpi or/and noacpi are not enough and only
acpi=off 'solves' problem.
o tested versions
-----------------
I tested 2.6.6-rc1, 2.6.5-mm6, 2.6.4, 2.6.1 and symptoms are similar
(when debug is disabled last visible line is 'ACPI: IRQ10 SCI: Edge set
to Level Trigger') With 2.4.24 and 2.4.25 and ACPI enabled I got blank
screen instead of text, but I guess it's the same problem (without ACPI
2.4.2[45] boot fine).
Custom DSDT does not help. I patched osl.c and according to logs new table
(found here: http://acpi.sourceforge.net/dsdt/view.php?id=77) was loaded
correctly, but system froze after 'Executing all Device _STA and_INI methods'
as before.
o references
------------
I found one similar description of problem, with Compaq Presario 2158 EA,
but no solution
(http://linux.derkeiler.com/Newsgroups/comp.os.linux.portable/2003-09/0017.html).
It's bit strange to me, and maybe I should test some older ACPI versions,
as there are many pages with information, that ACPI with modified DSDT is
almost fully functional...
o system details
----------------
2.6.6-rc1 config:
http://zeus.polsl.gliwice.pl/~jfk/kernel/acpi/config-2.6.6-rc1
2.4.25 config:
http://zeus.polsl.gliwice.pl/~jfk/kernel/acpi/config-2.4.25
acpidmp output:
http://zeus.polsl.gliwice.pl/~jfk/kernel/acpi/acpidmp
cpuinfo:
http://zeus.polsl.gliwice.pl/~jfk/kernel/acpi/cpuinfo
lspci:
http://zeus.polsl.gliwice.pl/~jfk/kernel/acpi/lspci
http://zeus.polsl.gliwice.pl/~jfk/kernel/acpi/lspci-v
http://zeus.polsl.gliwice.pl/~jfk/kernel/acpi/lspci-v-v
http://zeus.polsl.gliwice.pl/~jfk/kernel/acpi/lspci-v-v-v
/proc/dma:
http://zeus.polsl.gliwice.pl/~jfk/kernel/acpi/dma
/proc/interrupts:
http://zeus.polsl.gliwice.pl/~jfk/kernel/acpi/interrupts
(all collected with acpi=off)
Gnu C 3.3.3
Gnu make 3.80
binutils 2.14.90.0.7
util-linux 2.12
mount 2.12
module-init-tools 3.0-pre10
e2fsprogs 1.35
jfsutils 1.1.4
xfsprogs 2.6.5
Linux C Library 2.3.2
Dynamic linker (ldd) 2.3.2
Procps 3.2.1
Net-tools 1.60
Console-tools 0.2.3
Sh-utils 5.0.91
Suggestions are welcome.
bye!
--
Jacek Kawa
-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
reply other threads:[~2004-04-18 1:00 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20040418005959.GA15475@finwe.eu.org \
--to=jfk-am85onwwv3kkudhyt5lh4dtuac2u4x/s@public.gmane.org \
--cc=acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox