* support for Sony vaio VGN-A1XX
@ 2004-08-15 7:48 Luis Alves
0 siblings, 0 replies; only message in thread
From: Luis Alves @ 2004-08-15 7:48 UTC (permalink / raw)
To: acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f
[-- Attachment #1: Type: text/plain, Size: 1242 bytes --]
Hi
I am trying to make the extra keys on my vaio work,
I tried sonypi but was not able to make the keys work,
but I was able to make the brightness work.
Also this laptop as a auto brightness feature with a light sensor to auto
adjust the brightness to save battery life. Does any one know how to make
this work.
Hi have a report of my experiences with my vaio at:
http://www.linux-on-laptops.com/hosted/svvgna190.html
I attached the acpi info from my computer
cat /proc/acpi/dsdt > /tmp/trace/dsdt.aml
dmesg -s40000 > /tmp/trace/dmesg_s40000.dump
dmidecode > /tmp/trace/dmidecode.dump
lspci -vv > /tmp/trace/lspci_vv.dmup
any information would be usefull.
--
___________________________________________________________________________
Luis Antonio Ferreira Alves
http://finalpoint.homeunix.net
email: luis.alves-Gbsd49wXnelWk0Htik3J/w@public.gmane.org
lalves-r/Jw6+rmf7HQT0dZR+AlfA@public.gmane.org
AIM-lalves AIM-lafasvl ICQ-5061305 AIM-lalvesnet YAHOO-lafa_home
___________________________________________________________________________
DB2Everyplace http://www-3.ibm.com/software/data/db2/everyplace/
Reclaim Your Inbox! http://www.mozilla.org/products/thunderbird/
[-- Attachment #2: dmesg_s40000.dump --]
[-- Type: text/plain, Size: 21202 bytes --]
Linux version 2.6.8-0.rc2.2mdk-i686-up-4GB (nplanel-Z0lnJUwvxyVn+L6o72McsUEOCMrvLtNR@public.gmane.org) (gcc version 3.4.1 (Mandrakelinux (Alpha 3.4.1-2mdk)) #1 Wed Jul 21 19:15:51 CEST 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007ff40000 (usable)
BIOS-e820: 000000007ff40000 - 000000007ff50000 (ACPI data)
BIOS-e820: 000000007ff50000 - 0000000080000000 (ACPI NVS)
1151MB HIGHMEM available.
896MB LOWMEM available.
On node 0 totalpages: 524096
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 225280 pages, LIFO batch:16
HighMem zone: 294720 pages, LIFO batch:16
DMI present.
ACPI: RSDP (v000 SONY ) @ 0x000f53f0
ACPI: RSDT (v001 SONY F1 0x20040607 MSFT 0x00000097) @ 0x7ff40000
ACPI: FADT (v002 SONY F1 0x20040607 MSFT 0x00000097) @ 0x7ff40200
ACPI: OEMB (v001 SONY F1 0x20040607 MSFT 0x00000097) @ 0x7ff50040
ACPI: DSDT (v001 SONY F1 0x20040607 MSFT 0x0100000d) @ 0x00000000
ACPI: PM-Timer IO Port: 0x408
Built 1 zonelists
Found and enabled local APIC!
Initializing CPU#0
Kernel command line: BOOT_IMAGE=linuxi686-up-4GB_noresume ro root=307 devfs=mount acpi=on resume=/dev/hda6 splash=silent nolapic noresume
bootsplash: silent mode.
PID hash table entries: 4096 (order 12: 32768 bytes)
Detected 1695.018 MHz processor.
Using pmtmr for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2073980k/2096384k available (2020k kernel code, 21252k reserved, 826k data, 284k init, 1178880k highmem, 0k BadRAM)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 3358.72 BogoMIPS
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: afe9fbbf 00000000 00000000 00000000
CPU: After vendor identify, caps: afe9fbbf 00000000 00000000 00000000
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: After all inits, caps: afe9fbbf 00000000 00000000 00000040
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel(R) Pentium(R) M processor 1.70GHz stepping 06
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 383k freed
NET: Registered protocol family 16
EISA bus registered
PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
Looking for DSDT in initrd ... not found!
ACPI: IRQ9 SCI: Level Trigger.
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
ACPI: Embedded Controller [EC0] (gpe 28)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *9)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 9)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 7 9)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9)
ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 9)
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Disabled
PCI: Using ACPI for IRQ routing
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 9 (level, low) -> IRQ 9
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 4
ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 4 (level, low) -> IRQ 4
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 7
ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 7 (level, low) -> IRQ 7
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 3
ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 3 (level, low) -> IRQ 3
ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 7 (level, low) -> IRQ 7
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9
ACPI: PCI interrupt 0000:00:1f.3[B] -> GSI 9 (level, low) -> IRQ 9
ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 9 (level, low) -> IRQ 9
ACPI: PCI interrupt 0000:00:1f.6[B] -> GSI 9 (level, low) -> IRQ 9
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 9
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 9 (level, low) -> IRQ 9
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 9
ACPI: PCI interrupt 0000:02:01.0[A] -> GSI 9 (level, low) -> IRQ 9
ACPI: PCI interrupt 0000:02:01.2[C] -> GSI 3 (level, low) -> IRQ 3
ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 5
ACPI: PCI interrupt 0000:02:01.3[B] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI interrupt 0000:02:02.0[A] -> GSI 7 (level, low) -> IRQ 7
ACPI: PCI interrupt 0000:02:03.0[A] -> GSI 9 (level, low) -> IRQ 9
ACPI: PCI interrupt 0000:02:04.0[A] -> GSI 9 (level, low) -> IRQ 9
ACPI: PCI interrupt 0000:02:04.1[B] -> GSI 9 (level, low) -> IRQ 9
ACPI: PCI interrupt 0000:02:04.2[C] -> GSI 7 (level, low) -> IRQ 7
vesafb: framebuffer at 0xd0000000, mapped to 0xf880c000, size 1875k
vesafb: mode is 800x600x16, linelength=1600, pages=67
vesafb: protected mode interface info at c000:57f6
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
fb0: VESA VGA frame buffer device
apm: BIOS not found.
audit: initializing netlink socket (disabled)
audit(1092519713.4294966188:0): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch-r1x6VkxMR+00zabcByZE4g@public.gmane.org)
devfs: boot_options: 0x1
Initializing Cryptographic API
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
bootsplash 3.1.4-2004/02/19-spock-0.1: looking for picture.... silentjpeg size 10822 bytes, found (800x600, 10774 bytes, v3).
Console: switching to colour frame buffer device 92x32
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
ACPI: PCI interrupt 0000:00:1f.6[B] -> GSI 9 (level, low) -> IRQ 9
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH4: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 7 (level, low) -> IRQ 7
ICH4: chipset revision 3
ICH4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
hda: HITACHI_DK23FA-80, ATA DISK drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: MATSHITAUJ-820D, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100)
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 p6 p7 >
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
input: PS/2 Generic Mouse on isa0060/serio1
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
EISA: Probing bus 0 at eisa0
NET: Registered protocol family 2
IP: routing cache hash table of 16384 buckets, 128Kbytes
TCP: Hash tables configured (established 524288 bind 65536)
NET: Registered protocol family 1
Resume Machine: Resuming from device unknown-block(3,6)
Resume Machine: This is normal swap space
disabled
PM: Reading pmdisk image.
PM: Resume from disk failed.
ACPI: (supports S0 S3 S4 S5)
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
Mounted devfs on /dev
ieee1394: Initialized config rom entry `ip1394'
SCSI subsystem initialized
ReiserFS: hda7: found reiserfs format "3.6" with standard journal
ReiserFS: hda7: using ordered data mode
ReiserFS: hda7: journal params: device hda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda7: checking transaction log (hda7)
ReiserFS: hda7: Using r5 hash to sort names
Mounted devfs on /dev
Freeing unused kernel memory: 284k freed
Real Time Clock Driver v1.12
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 9 (level, low) -> IRQ 9
uhci_hcd 0000:00:1d.0: Intel Corp. 82801DB (ICH4) USB UHCI #1
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: irq 9, io base 0000e800
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 4 (level, low) -> IRQ 4
uhci_hcd 0000:00:1d.1: Intel Corp. 82801DB (ICH4) USB UHCI #2
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: irq 4, io base 0000e880
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 7 (level, low) -> IRQ 7
uhci_hcd 0000:00:1d.2: Intel Corp. 82801DB (ICH4) USB UHCI #3
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: irq 7, io base 0000ec00
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb 2-2: new full speed USB device using address 2
ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 3 (level, low) -> IRQ 3
ehci_hcd 0000:00:1d.7: Intel Corp. 82801DB (ICH4) USB2 EHCI Controller
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: irq 3, pci mem f8a25c00
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
ACPI: PCI interrupt 0000:02:04.2[C] -> GSI 7 (level, low) -> IRQ 7
ehci_hcd 0000:02:04.2: NEC Corporation USB 2.0
ehci_hcd 0000:02:04.2: irq 7, pci mem f8a97400
ehci_hcd 0000:02:04.2: new USB bus registered, assigned bus number 5
ehci_hcd 0000:02:04.2: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 5 ports detected
usb 2-2: device not accepting address 2, error -71
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 64 td 64
ACPI: PCI interrupt 0000:02:04.0[A] -> GSI 9 (level, low) -> IRQ 9
ohci_hcd 0000:02:04.0: NEC Corporation USB
ohci_hcd 0000:02:04.0: irq 9, pci mem f8a99000
ohci_hcd 0000:02:04.0: new USB bus registered, assigned bus number 6
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 3 ports detected
ACPI: PCI interrupt 0000:02:04.1[B] -> GSI 9 (level, low) -> IRQ 9
ohci_hcd 0000:02:04.1: NEC Corporation USB (#2)
usb 4-4: new high speed USB device using address 2
ohci_hcd 0000:02:04.1: irq 9, pci mem f8a9b000
ohci_hcd 0000:02:04.1: new USB bus registered, assigned bus number 7
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
hub 4-4:1.0: USB hub found
hub 4-4:1.0: 4 ports detected
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
ohci_hcd 0000:02:04.1: wakeup
usb 5-4: new high speed USB device using address 3
usb 4-4.1: new low speed USB device using address 3
usbcore: registered new driver hiddev
input: USB HID v1.11 Keyboard [Microsoft Microsoft Wireless Optical Desktop® 1.00] on usb-0000:00:1d.7-4.1
input: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Desktop® 1.00] on usb-0000:00:1d.7-4.1
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
usbcore: registered new driver usbkbd
drivers/usb/input/usbkbd.c: :USB HID Boot Protocol keyboard driver
ts: Compaq touchscreen protocol output
usb 4-4.2: new low speed USB device using address 4
input,hiddev0: USB HID v1.10 Keyboard [Sony Sony IR Receiver] on usb-0000:00:1d.7-4.2
usb 7-1: new full speed USB device using address 2
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 1 proto 2 vid 0x067B pid 0x2305
Adding 3148700k swap on /dev/hda6. Priority:-1 extents:1
imm: Version 2.05 (for Linux 2.4.0)
ppa: Version 2.07 (for Linux 2.4.x)
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel 855PM Chipset.
agpgart: Maximum main memory to use for agp memory: 1919M
agpgart: AGP aperture is 256M @ 0xe0000000
ohci1394: $Rev: 1223 $ Ben Collins <bcollins-8fiUuRrzOP0dnm+yROfE0A@public.gmane.org>
ACPI: PCI interrupt 0000:02:01.2[C] -> GSI 3 (level, low) -> IRQ 3
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[3] MMIO=[ff6fe800-ff6fefff] Max Packet=[2048]
ip1394: $Rev: 1224 $ Ben Collins <bcollins-8fiUuRrzOP0dnm+yROfE0A@public.gmane.org>
ip1394: eth0: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
ieee1394: Host added: ID:BUS[0-00:1023] GUID[0800460301a5325b]
e1000: Ignoring new-style parameters in presence of obsolete ones
Intel(R) PRO/1000 Network Driver - version 5.2.52-k4
Copyright (c) 1999-2004 Intel Corporation.
ACPI: PCI interrupt 0000:02:03.0[A] -> GSI 9 (level, low) -> IRQ 9
e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (8192 buckets, 65536 max) - 328 bytes per conntrack
ACPI: AC Adapter [ACAD] (on-line)
ACPI: Battery Slot [BAT1] (battery present)
ACPI: Power Button (CM) [PWRB]
ACPI: Lid Switch [LID]
ACPI: Processor [CPU1] (supports C1 C2, 8 throttling states)
ACPI: Thermal Zone [ATF0] (57 C)
inserting floppy driver for 2.6.8-0.rc2.2mdk-i686-up-4GB
Floppy drive(s): fd0 is 1.44M
floppy0: no floppy controllers found
inserting floppy driver for 2.6.8-0.rc2.2mdk-i686-up-4GB
Floppy drive(s): fd0 is 1.44M<4>devfs_mk_dev: could not append to parent for floppy/0u1440
devfs_mk_dev: could not append to parent for floppy/0u1680
devfs_mk_dev: could not append to parent for floppy/0u1722
devfs_mk_dev: could not append to parent for floppy/0u1743
devfs_mk_dev: could not append to parent for floppy/0u1760
devfs_mk_dev: could not append to parent for floppy/0u1920
devfs_mk_dev: could not append to parent for floppy/0u1840
devfs_mk_dev: could not append to parent for floppy/0u1600
devfs_mk_dev: could not append to parent for floppy/0u360
devfs_mk_dev: could not append to parent for floppy/0u720
devfs_mk_dev: could not append to parent for floppy/0u820
devfs_mk_dev: could not append to parent for floppy/0u830
devfs_mk_dev: could not append to parent for floppy/0u1040
devfs_mk_dev: could not append to parent for floppy/0u1120
devfs_mk_dev: could not append to parent for floppy/0u800
devfs_mk_dev: could not append to parent for floppy/0
floppy0: no floppy controllers found
inserting floppy driver for 2.6.8-0.rc2.2mdk-i686-up-4GB
Floppy drive(s): fd0 is 1.44M
floppy0: no floppy controllers found
inserting floppy driver for 2.6.8-0.rc2.2mdk-i686-up-4GB
Floppy drive(s): fd0 is 1.44M<4>devfs_mk_dev: could not append to parent for floppy/0u1440
devfs_mk_dev: could not append to parent for floppy/0u1680
devfs_mk_dev: could not append to parent for floppy/0u1722
devfs_mk_dev: could not append to parent for floppy/0u1743
devfs_mk_dev: could not append to parent for floppy/0u1760
devfs_mk_dev: could not append to parent for floppy/0u1920
devfs_mk_dev: could not append to parent for floppy/0u1840
devfs_mk_dev: could not append to parent for floppy/0u1600
devfs_mk_dev: could not append to parent for floppy/0u360
devfs_mk_dev: could not append to parent for floppy/0u720
devfs_mk_dev: could not append to parent for floppy/0u820
devfs_mk_dev: could not append to parent for floppy/0u830
devfs_mk_dev: could not append to parent for floppy/0u1040
devfs_mk_dev: could not append to parent for floppy/0u1120
devfs_mk_dev: could not append to parent for floppy/0u800
devfs_mk_dev: could not append to parent for floppy/0
floppy0: no floppy controllers found
inserting floppy driver for 2.6.8-0.rc2.2mdk-i686-up-4GB
Floppy drive(s): fd0 is 1.44M
floppy0: no floppy controllers found
hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
NET: Registered protocol family 17
e1000: eth1: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex
ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 9 (level, low) -> IRQ 9
PCI: Setting latency timer of device 0000:00:1f.5 to 64
intel8x0_measure_ac97_clock: measured 49562 usecs
intel8x0: clocking to 48000
Bluetooth: Core ver 2.6
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.3
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM ver 1.3
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
NET: Registered protocol family 10
Disabled Privacy Extensions on device c0385b20(lo)
IPv6 over IPv4 tunneling driver
mtrr: 0xd0000000,0x4000000 overlaps existing 0xd0000000,0x100000
lp: driver loaded but no devices found
drivers/usb/input/hid-input.c: event field not found
drivers/usb/input/hid-input.c: event field not found
drivers/usb/input/hid-input.c: event field not found
Installing knfsd (copyright (C) 1996 okir-pn4DOG8n3UYbFoVRYvo4fw@public.gmane.org).
inserting floppy driver for 2.6.8-0.rc2.2mdk-i686-up-4GB
Floppy drive(s): fd0 is 1.44M<4>devfs_mk_dev: could not append to parent for floppy/0u1440
devfs_mk_dev: could not append to parent for floppy/0u1680
devfs_mk_dev: could not append to parent for floppy/0u1722
devfs_mk_dev: could not append to parent for floppy/0u1743
devfs_mk_dev: could not append to parent for floppy/0u1760
devfs_mk_dev: could not append to parent for floppy/0u1920
devfs_mk_dev: could not append to parent for floppy/0u1840
devfs_mk_dev: could not append to parent for floppy/0u1600
devfs_mk_dev: could not append to parent for floppy/0u360
devfs_mk_dev: could not append to parent for floppy/0u720
devfs_mk_dev: could not append to parent for floppy/0u820
devfs_mk_dev: could not append to parent for floppy/0u830
devfs_mk_dev: could not append to parent for floppy/0u1040
devfs_mk_dev: could not append to parent for floppy/0u1120
devfs_mk_dev: could not append to parent for floppy/0u800
devfs_mk_dev: could not append to parent for floppy/0
bootsplash 3.1.4-2004/02/19-spock-0.1: looking for picture.... found (800x600, 11774 bytes, v3).
bootsplash: status on console 0 changed to on
bootsplash 3.1.4-2004/02/19-spock-0.1: looking for picture.... found (800x600, 11774 bytes, v3).
bootsplash: status on console 1 changed to on
bootsplash 3.1.4-2004/02/19-spock-0.1: looking for picture.... found (800x600, 11774 bytes, v3).
bootsplash: status on console 2 changed to on
bootsplash 3.1.4-2004/02/19-spock-0.1: looking for picture.... found (800x600, 11774 bytes, v3).
bootsplash: status on console 3 changed to on
floppy0: no floppy controllers found
bootsplash 3.1.4-2004/02/19-spock-0.1: looking for picture.... found (800x600, 11774 bytes, v3).
bootsplash: status on console 4 changed to on
bootsplash 3.1.4-2004/02/19-spock-0.1: looking for picture.... found (800x600, 11774 bytes, v3).
bootsplash: status on console 5 changed to on
eth1: no IPv6 routers present
inserting floppy driver for 2.6.8-0.rc2.2mdk-i686-up-4GB
Floppy drive(s): fd0 is 1.44M
floppy0: no floppy controllers found
cdrom: This disc doesn't have any tracks I recognize!
sonypi: Sony Programmable I/O Controller Driver v1.23.
sonypi: detected type2 model, verbose = 0, fnkeyinit = off, camera = off, compat = off, mask = 0xffffffff, useinput = on, acpi = on
sonypi: enabled at irq=11, port1=0x1080, port2=0x1084
sonypi: device allocated minor is 63
Sony VAIO Jog Dial installed.
sonypi: removed.
sonypi: Sony Programmable I/O Controller Driver v1.23.
sonypi: detected type2 model, verbose = 0, fnkeyinit = off, camera = off, compat = off, mask = 0xffffffff, useinput = on, acpi = on
sonypi: enabled at irq=11, port1=0x1080, port2=0x1084
sonypi: device allocated minor is 63
Sony VAIO Jog Dial installed.
[-- Attachment #3: dmidecode.dump --]
[-- Type: text/plain, Size: 6367 bytes --]
# dmidecode 2.4
SMBIOS 2.3 present.
17 structures occupying 809 bytes.
Table at 0x000F8E30.
Handle 0x0000
DMI type 0, 20 bytes.
BIOS Information
Vendor: American Megatrends Inc.
Version: R0050F1
Release Date: 06/07/2004
Address: 0xF0000
Runtime Size: 64 kB
ROM Size: 512 kB
Characteristics:
PCI is supported
PC Card (PCMCIA) is supported
PNP is supported
BIOS is upgradeable
BIOS shadowing is allowed
ESCD support is available
Boot from CD is supported
Selectable boot is supported
EDD is supported
8042 keyboard services are supported (int 9h)
CGA/mono video services are supported (int 10h)
ACPI is supported
USB legacy is supported
AGP is supported
Smart battery is supported
BIOS boot specification is supported
Function key-initiated network boot is supported
Handle 0x0001
DMI type 1, 25 bytes.
System Information
Manufacturer: Sony Corporation
Product Name: VGN-A190(UC)
Version: C0003QH1
Serial Number: 28173030-3110492
UUID: 5B5966C0-FA69-11D7-8BDC-080046D9C22C
Wake-up Type: Power Switch
Handle 0x0002
DMI type 3, 17 bytes.
Chassis Information
Manufacturer: Sony Corporation
Type: Notebook
Lock: Not Present
Version: N/A
Serial Number: 28173030-3110492
Asset Tag: 8Q5L00000200fda0ee04d55672f2
Boot-up State: Safe
Power Supply State: Safe
Thermal State: Safe
Security Status: None
OEM Information: 0x0000000A
Handle 0x0003
DMI type 4, 35 bytes.
Processor Information
Socket Designation: N/A
Type: Central Processor
Family: Pentium M
Manufacturer: GenuineIntel
ID: D6 06 00 00 BF FB E9 AF
Signature: Type 0, Family 6, Model 13, Stepping 6
Flags:
FPU (Floating-point unit on-chip)
VME (Virtual mode extension)
DE (Debugging extension)
PSE (Page size extension)
TSC (Time stamp counter)
MSR (Model specific registers)
MCE (Machine check exception)
CX8 (CMPXCHG8 instruction supported)
APIC (On-chip APIC hardware supported)
SEP (Fast system call)
MTRR (Memory type range registers)
PGE (Page global enable)
MCA (Machine check architecture)
CMOV (Conditional move instruction supported)
PAT (Page attribute table)
CLFSH (CLFLUSH instruction supported)
DS (Debug store)
ACPI (ACPI supported)
MMX (MMX technology supported)
FXSR (Fast floating-point save and restore)
SSE (Streaming SIMD extensions)
SSE2 (Streaming SIMD extensions 2)
SS (Self-snoop)
TM (Thermal monitor supported)
SBF (Signal break on FERR)
Version: Intel(R) Pentium(R) M processor 1.70GHz
Voltage: 1.3 V
External Clock: 100 MHz
Max Speed: 1700 MHz
Current Speed: 1700 MHz
Status: Populated, Enabled
Upgrade: None
L1 Cache Handle: 0x0004
L2 Cache Handle: 0x0005
L3 Cache Handle: 0x0006
Serial Number: N/A
Asset Tag: N/A
Part Number: N/A
Handle 0x0004
DMI type 7, 19 bytes.
Cache Information
Socket Designation: L1 Cache
Configuration: Enabled, Socketed, Level 1
Operational Mode: Varies With Memory Address
Location: Internal
Installed Size: 32 KB
Maximum Size: 32 KB
Supported SRAM Types:
Unknown
Installed SRAM Type: Unknown
Speed: Unknown
Error Correction Type: Unknown
System Type: Data
Associativity: 8-way Set-associative
Handle 0x0005
DMI type 7, 19 bytes.
Cache Information
Socket Designation: L2 Cache
Configuration: Enabled, Socketed, Level 2
Operational Mode: Varies With Memory Address
Location: Internal
Installed Size: 2048 KB
Maximum Size: 2048 KB
Supported SRAM Types:
Unknown
Installed SRAM Type: Unknown
Speed: Unknown
Error Correction Type: Unknown
System Type: Unified
Associativity: 8-way Set-associative
Handle 0x0006
DMI type 7, 19 bytes.
Cache Information
Socket Designation: L3 Cache
Configuration: Disabled, Not Socketed, Level 3
Operational Mode: Unknown
Location: Unknown
Installed Size: 0 KB
Maximum Size: 0 KB
Supported SRAM Types:
Unknown
Installed SRAM Type: Unknown
Speed: Unknown
Error Correction Type: Unknown
System Type: Unknown
Associativity: Unknown
Handle 0x0007
DMI type 9, 13 bytes.
System Slot Information
Designation: PCCARD1
Type: 32-bit PC Card (PCMCIA)
Current Usage: Available
Length: Other
ID: Adapter 0, Socket 1
Characteristics:
5.0 V is provided
3.3 V is provided
PC Card-16 is supported
Cardbus is supported
Modem ring resume is supported
PME signal is supported
Hot-plug devices are supported
Handle 0x0008
DMI type 11, 5 bytes.
OEM Strings
String 1: UCG260XEUM
Handle 0x0009
DMI type 16, 15 bytes.
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: Unknown
Maximum Capacity: 2048 GB
Error Information Handle: Not Provided
Number Of Devices: 2
Handle 0x000A
DMI type 19, 15 bytes.
Memory Array Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0007FFFFFFF
Range Size: 2 GB
Physical Array Handle: 0x0009
Partition Width: 0
Handle 0x000B
DMI type 17, 21 bytes.
Memory Device
Array Handle: 0x0009
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: SODIMM
Set: None
Locator: SODIMM1
Bank Locator: BANK0
Type: DDR
Type Detail: Unknown
Handle 0x000C
DMI type 20, 19 bytes.
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0003FFFFFFF
Range Size: 1 GB
Physical Device Handle: 0x000B
Memory Array Mapped Address Handle: 0x000A
Partition Row Position: Unknown
Interleave Position: Unknown
Interleaved Data Depth: Unknown
Handle 0x000D
DMI type 17, 21 bytes.
Memory Device
Array Handle: 0x0009
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: SODIMM
Set: None
Locator: SODIMM2
Bank Locator: BANK1
Type: DDR
Type Detail: Unknown
Handle 0x000E
DMI type 20, 19 bytes.
Memory Device Mapped Address
Starting Address: 0x00040000000
Ending Address: 0x0007FFFFFFF
Range Size: 1 GB
Physical Device Handle: 0x000D
Memory Array Mapped Address Handle: 0x000A
Partition Row Position: Unknown
Interleave Position: Unknown
Interleaved Data Depth: Unknown
Handle 0x000F
DMI type 32, 20 bytes.
System Boot Information
Status: No errors detected
Handle 0x0010
DMI type 127, 4 bytes.
End Of Table
[-- Attachment #4: dsdt.aml --]
[-- Type: application/octet-stream, Size: 15192 bytes --]
[-- Attachment #5: lspci_vv.dmup --]
[-- Type: text/plain, Size: 13347 bytes --]
00:00.0 Host bridge: Intel Corp. 82855PM Processor to I/O Controller (rev 03)
Subsystem: Sony Corporation: Unknown device 8187
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=256M]
Capabilities: [e4] #09 [4104]
Capabilities: [a0] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
00:01.0 PCI bridge: Intel Corp. 82855PM Processor to AGP Controller (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: ff500000-ff5fffff
Prefetchable memory behind bridge: ce900000-de9fffff
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
00:1d.0 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 03) (prog-if 00 [UHCI])
Subsystem: Sony Corporation: Unknown device 8188
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 9
Region 4: I/O ports at e800 [size=32]
00:1d.1 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 03) (prog-if 00 [UHCI])
Subsystem: Sony Corporation: Unknown device 8188
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 4
Region 4: I/O ports at e880 [size=32]
00:1d.2 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 03) (prog-if 00 [UHCI])
Subsystem: Sony Corporation: Unknown device 8188
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 7
Region 4: I/O ports at ec00 [size=32]
00:1d.7 USB Controller: Intel Corp. 82801DB/DBM (ICH4/ICH4-M) USB 2.0 EHCI Controller (rev 03) (prog-if 20 [EHCI])
Subsystem: Sony Corporation: Unknown device 8188
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed to IRQ 3
Region 0: Memory at ff7ffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] #0a [2080]
00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 83) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+
Latency: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=64
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: ff600000-ff6fffff
Prefetchable memory behind bridge: dea00000-deafffff
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
00:1f.0 ISA bridge: Intel Corp. 82801DBM LPC Interface Controller (rev 03)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:1f.1 IDE interface: Intel Corp. 82801DBM (ICH4) Ultra ATA Storage Controller (rev 03) (prog-if 8a [Master SecP PriP])
Subsystem: Sony Corporation: Unknown device 8188
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 7
Region 0: I/O ports at <unassigned>
Region 1: I/O ports at <unassigned>
Region 2: I/O ports at <unassigned>
Region 3: I/O ports at <unassigned>
Region 4: I/O ports at ffa0 [size=16]
Region 5: Memory at 80000000 (32-bit, non-prefetchable) [size=1K]
00:1f.3 SMBus: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 03)
Subsystem: Sony Corporation: Unknown device 8188
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 9
Region 4: I/O ports at 0540 [size=32]
00:1f.5 Multimedia audio controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03)
Subsystem: Sony Corporation: Unknown device 818b
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 9
Region 0: I/O ports at ee00 [size=256]
Region 1: I/O ports at e000 [size=64]
Region 2: Memory at ff7ff800 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at ff7ff400 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:1f.6 Modem: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 03) (prog-if 00 [Generic])
Subsystem: Sony Corporation: Unknown device 818c
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 9
Region 0: I/O ports at e400 [size=256]
Region 1: I/O ports at e080 [size=128]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:00.0 VGA compatible controller: ATI Technologies Inc RV350 [Mobility Radeon 9600 M10] (prog-if 00 [VGA])
Subsystem: Sony Corporation: Unknown device 818a
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (2000ns min), cache line size 10
Interrupt: pin A routed to IRQ 9
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at c800 [size=256]
Region 2: Memory at ff5f0000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at ff5c0000 [disabled] [size=128K]
Capabilities: [58] AGP version 2.0
Status: RQ=80 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP- GART64- 64bit- FW- Rate=<none>
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:01.0 CardBus bridge: Texas Instruments PCI7420 CardBus Controller
Subsystem: Sony Corporation: Unknown device 818f
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64, cache line size 10
Interrupt: pin A routed to IRQ 9
Region 0: Memory at 80001000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
I/O window 0: 00000000-00000003
I/O window 1: 00000000-00000003
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt- PostWrite-
16-bit legacy interface ports at 0001
02:01.2 FireWire (IEEE 1394): Texas Instruments PCI7x20 1394a-2000 OHCI Two-Port PHY/Link-Layer Controller (prog-if 10 [OHCI])
Subsystem: Sony Corporation: Unknown device 818f
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (750ns min, 1000ns max), cache line size 10
Interrupt: pin C routed to IRQ 3
Region 0: Memory at ff6fe800 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at ff6f8000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME+
02:01.3 Unknown mass storage controller: Texas Instruments PCI7420/PCI7620 Dual Socket CardBus and Smart Card Cont. w/ 1394a-2000 OHCI Two-Port PHY/Link-Layer Cont. an
Subsystem: Sony Corporation: Unknown device 8190
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (1750ns min, 1000ns max), cache line size 10
Interrupt: pin B routed to IRQ 5
Region 0: Memory at ff6ff000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:02.0 Network controller: Intel Corp. PRO/Wireless 2200BG (rev 05)
Subsystem: Intel Corp.: Unknown device 2751
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (750ns min, 6000ns max), cache line size 10
Interrupt: pin A routed to IRQ 7
Region 0: Memory at ff6fd000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
02:03.0 Ethernet controller: Intel Corp. 82541GI/PI Gigabit Ethernet Controller
Subsystem: Sony Corporation: Unknown device 818e
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (63750ns min), cache line size 10
Interrupt: pin A routed to IRQ 9
Region 0: Memory at ff6c0000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at ff6a0000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at dc00 [size=64]
Expansion ROM at ff680000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [e4] PCI-X non-bridge device.
Command: DPERE- ERO+ RBC=0 OST=0
Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-, DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM-
02:04.0 USB Controller: NEC Corporation USB (rev 43) (prog-if 10 [OHCI])
Subsystem: Sony Corporation: Unknown device 819a
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (250ns min, 10500ns max), cache line size 10
Interrupt: pin A routed to IRQ 9
Region 0: Memory at ff6f7000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:04.1 USB Controller: NEC Corporation USB (rev 43) (prog-if 10 [OHCI])
Subsystem: Sony Corporation: Unknown device 819a
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (250ns min, 10500ns max), cache line size 10
Interrupt: pin B routed to IRQ 9
Region 0: Memory at ff6fc000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:04.2 USB Controller: NEC Corporation USB 2.0 (rev 04) (prog-if 20 [EHCI])
Subsystem: Sony Corporation: Unknown device 819a
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (4000ns min, 8500ns max), cache line size 10
Interrupt: pin C routed to IRQ 7
Region 0: Memory at ff6fe400 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2004-08-15 7:48 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-08-15 7:48 support for Sony vaio VGN-A1XX Luis Alves
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox