From mboxrd@z Thu Jan 1 00:00:00 1970 From: mizu Subject: Re: ACER 632 notebook reboots instead of poweroff Date: Wed, 27 Oct 2004 16:18:33 +0200 Sender: acpi-devel-admin-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org Message-ID: <20041027141833.GC8443@zimen.sk> References: <20041026194029.GA10954@pooh> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="NKoe5XOeduwbEQHU" Return-path: Content-Disposition: inline In-Reply-To: <20041026194029.GA10954@pooh> Errors-To: acpi-devel-admin-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org List-Unsubscribe: , List-Post: List-Help: List-Subscribe: , List-Archive: To: acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org List-Id: linux-acpi@vger.kernel.org --NKoe5XOeduwbEQHU Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable Hi, the same problem is with my ACER 632 too. I've tried disable wakeup devices /proc/acpi/wakeup, but with no success. =20 Sia mizu On Tue, Oct 26, 2004 at 09:40:29PM +0200, Laszlo 'GCS' Boszormenyi wrote: > Hi, >=20 > I have a Gericom 1st supersonic (PIII 1.2Ghz) laptop, running Debian > Sarge (up-to-date). I have it since ~2.4.14, and until 2.6.8.1 the > 'halt' command shut down the machine correctly. Starting with 2.6.8.1-bk1 > it reboots. :( I realize that -bk1 has a big ACPI update, which may be > the problem IMHO. > I have tried to look into existing bugreports, but could not find any > similar to this on the Kernel Bugzilla nor in the ACPI Bugzilla. All I > could found some note that Local APIC can cause problems, but even if I > disable that, the problem remains. Asked LKML without any reply; hope > here I can get some help, so if you need more information about it, > please let me know. > Some maybe relevant bits from the machine: > 0000:00:00.0 Host bridge: VIA Technologies, Inc. VT82C693A/694x [Apollo P= RO133x] (rev c4) > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParEr= r- Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=3Dmedium >TAbort= - SERR- Latency: 0 > Region 0: Memory at e8000000 (32-bit, prefetchable) [size=3D128M] > Capabilities: [a0] AGP version 2.0 > Status: RQ=3D32 Iso- ArqSz=3D0 Cal=3D0 SBA+ ITACoh- GART6= 4- HTrans- 64bit- FW- AGP3- Rate=3Dx1,x2,x4 > Command: RQ=3D1 ArqSz=3D0 Cal=3D0 SBA+ AGP+ GART64- 64bit= - FW- Rate=3Dx1 > Capabilities: [c0] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=3D0mA PME(D0-,D1-,= D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=3D0 DScale=3D0 PME- >=20 > 0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo > MVP3/Pro133x AGP] (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParEr= r- Stepping- SERR- FastB2B- > Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=3Dmedium >TAbort= - SERR- Latency: 0 > Bus: primary=3D00, secondary=3D01, subordinate=3D01, sec-latency= =3D0 > I/O behind bridge: 00009000-00009fff > Memory behind bridge: e0000000-e00fffff > Prefetchable memory behind bridge: f0000000-f7ffffff > BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B- > Capabilities: [80] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=3D0mA PME(D0-,D1-,= D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=3D0 DScale=3D0 PME- >=20 >=20 > A dmesg between a working 2.6.8.1 and 2.6.8.1-bk1 reveals only minor(?) > things: > Mount-cache hash table entries: 512 (order: 0, 4096 bytes) > -CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000 > -CPU: After vendor identify, caps: 0383fbff 00000000 00000000 00000000 > +CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 > +CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000 > CPU: L1 I cache: 16K, L1 D cache: 16K > CPU: L2 cache: 256K > -CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 > +CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 > Intel machine check architecture supported. > [...] > -enabled ExtINT on CPU#0 > -ESR value before enabling vector: 00000000 > -ESR value after enabling vector: 00000000 > -Using local APIC timer interrupts. > -calibrating APIC timer ... > -..... CPU clock speed is 1199.0574 MHz. > -..... host bus clock speed is 133.0285 MHz. > +ACPI: IRQ9 SCI: Edge set to Level Trigger. > NET: Registered protocol family 16 > PCI: PCI BIOS revision 2.10 entry at 0xfd84e, last bus=3D1 > PCI: Using configuration type 1 > mtrr: v2.0 (20020519) > -ACPI: Subsystem revision 20040326 > -ACPI: IRQ9 SCI: Edge set to Level Trigger. > +ACPI: Subsystem revision 20040715 > [...] > Initializing Cryptographic API > -PCI: Disabling Via external APIC routing > PCI: Via IRQ fixup for 0000:00:07.5, from 255 to 5 >=20 > Anyone have at least a shot what can cause this problem? > I would be happy to try out patches or back out ones from -bk1 if > needed. >=20 > Any help is greatly appreciated in advance, > Laszlo/GCS >=20 >=20 >=20 > ------------------------------------------------------- > This SF.Net email is sponsored by: > Sybase ASE Linux Express Edition - download now for FREE > LinuxWorld Reader's Choice Award Winner for best database on Linux. > http://ads.osdn.com/?ad_id=3D5588&alloc_id=3D12065&op=3Dclick > _______________________________________________ > Acpi-devel mailing list > Acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org > https://lists.sourceforge.net/lists/listinfo/acpi-devel --=20 mizu =3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D [-> E-mail:michal_AT_zimen_DOT_sk =20 [-> ICQ:97165392 [-> WWW: http://michal.zimen.sk =3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D --NKoe5XOeduwbEQHU Content-Type: application/pgp-signature; name="signature.asc" Content-Description: Digital signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.5 (GNU/Linux) iD8DBQFBf6459kFXwDL4DRkRAu5kAKCWjCe9BKUbznpvVGaOV09ffMR/twCffQMP F4KBLs4Z5TI5zrniAR3oiYQ= =Ny6D -----END PGP SIGNATURE----- --NKoe5XOeduwbEQHU-- ------------------------------------------------------- This SF.Net email is sponsored by: Sybase ASE Linux Express Edition - download now for FREE LinuxWorld Reader's Choice Award Winner for best database on Linux. http://ads.osdn.com/?ad_id=5588&alloc_id=12065&op=click