From mboxrd@z Thu Jan 1 00:00:00 1970 From: Dominik Brodowski Subject: Re: Re: Centrino speedstep Date: Wed, 29 Dec 2004 22:46:29 +0100 Message-ID: <20041229214629.GA21054@dominikbrodowski.de> References: <20041228212653.GA8436@dominikbrodowski.de> <41D30842.4040204@paranoici.org> <20041229205905.GA12181@dominikbrodowski.de> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: Sender: acpi-devel-admin-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org Errors-To: acpi-devel-admin-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org List-Unsubscribe: , List-Post: List-Help: List-Subscribe: , List-Archive: To: Johan Vromans Cc: acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org List-Id: linux-acpi@vger.kernel.org On Wed, Dec 29, 2004 at 10:33:26PM +0100, Johan Vromans wrote: > Dominik Brodowski writes: > > > You should fix the DSDT and replace the frequency value of the P0 > > state with 1500 instead of 1600. Else frequency calculations in the > > kernel get mixed up which can cause too short or too long delays. > > I've already fixed my DSDT to compile, so this would be easily added > ... if I knew where. Can you point me in the right direction? in the _PSS, first block, somewhere should be 1600. Change it to 1500. Dominik ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://productguide.itmanagersjournal.com/