TM632 and S3. Network after wakeup. (kernel 2.6.10-rc3-mm1)

TM632 and S3. Network after wakeup. (kernel 2.6.10-rc3-mm1)

[Michal Zimen]

[-- Attachment #1: Type: text/plain, Size: 843 bytes --]

Salut.

   a good job ! :)  Thanks a lot.
   
   Last night i've tested 2.6.10-rc3-mm1 kernel with S3 sleep state and i was surprised,
   when i can wakeup normally :) (without hangs)

   It looks very good, soundcard ALI5451 driver wakeups fine, but there is a one
   strange problem with network.
   (I couldn't test X, because this version have several bugs, also X's
    disfunction.:( I think, nv driver have work well for me.)

   Resolver did not work, i guess.
   
   When i try to ping to another site: Uknown host.

   But when i try to ping with IP address, it is all right.



   Any ideas ?


   				mizu

   


   
-- 
              mizu
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
[-> E-mail:michal_AT_zimen_DOT_sk    
[-> ICQ:97165392
[-> WWW: http://michal.zimen.sk
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 189 bytes --]

Re: TM632 and S3. Network after wakeup. (kernel 2.6.10-rc3-mm1)

[Stefan Dösinger]

>    Resolver did not work, i guess.
>
>    When i try to ping to another site: Uknown host.
>
>    But when i try to ping with IP address, it is all right.
Looks like you lost your network configuration. This is not really a bug, as 
you might have moved your computer somewhere else while it was suspended.

Try to restart your network, e.g. /etc/init.d/network restart, depending on 
your disto. The ifplugd daemon could take care of this for you. If you move 
between different WLANs you may want to use waproamd too.

Cheers,
Stefan


-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now. 
http://productguide.itmanagersjournal.com/

Re: [SOLVED] TM632 and S3. Network after wakeup. (kernel 2.6.10-rc3-mm1)

[mizu]

[-- Attachment #1: Type: text/plain, Size: 1078 bytes --]

Yeah !

  -laptop Acer TM632 
  -with vanilla kernel 2.6.10
  -with GNU nvidia driver.

  S3 state (sleep and wakeup) works perfectly.

  I think, it looks like we have full ACPI support.


  Good job, thanks !


  			mizu

			
On Thu, Dec 16, 2004 at 09:30:27PM +0100, Stefan D?singer wrote:
> >    Resolver did not work, i guess.
> >
> >    When i try to ping to another site: Uknown host.
> >
> >    But when i try to ping with IP address, it is all right.
> Looks like you lost your network configuration. This is not really a bug, as 
> you might have moved your computer somewhere else while it was suspended.
> 
> Try to restart your network, e.g. /etc/init.d/network restart, depending on 
> your disto. The ifplugd daemon could take care of this for you. If you move 
> between different WLANs you may want to use waproamd too.
> 
> Cheers,
> Stefan

-- 
              mizu
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
[-> E-mail:michal_AT_zimen_DOT_sk    
[-> ICQ:97165392
[-> WWW: http://michal.zimen.sk
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 189 bytes --]

Re: [SOLVED] TM632 and S3. Network after wakeup. (kernel 2.6.10-rc3-mm1)

[mizu]

[-- Attachment #1.1: Type: text/plain, Size: 980 bytes --]

hi :)


i did not test S4 yet.

WHat kind of problem, do you have ?
What is the last message of your resume operation ?



my config is here as attachment.


		good luck
				mizu



On Fri, Jan 07, 2005 at 11:55:38AM +0100, Tim Dijkstra wrote:
> On Tue, 4 Jan 2005 19:55:26 +0100
> mizu <michal-VaXaUECoPuY@public.gmane.org> wrote:
> 
> > Yeah !
> > 
> >   -laptop Acer TM632 
> >   -with vanilla kernel 2.6.10
> >   -with GNU nvidia driver.
> > 
> >   S3 state (sleep and wakeup) works perfectly.
> > 
> >   I think, it looks like we have full ACPI support.
> 
> Hi, I have a very similar machine (TM636), but can't get it to work.
> Could you please send me your .config, maybe I can track down the
> differences. BTW, did you also try S4?
> 
> grts Tim

-- 
              mizu
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
[-> E-mail:michal_AT_zimen_DOT_sk    
[-> ICQ:97165392
[-> WWW: http://michal.zimen.sk
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

[-- Attachment #1.2: config.gz --]
[-- Type: application/octet-stream, Size: 8117 bytes --]

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 189 bytes --]

Re: [SOLVED] TM632 and S3. Network after wakeup. (kernel 2.6.10-rc3-mm1)

[mizu]

[-- Attachment #1: Type: text/plain, Size: 1336 bytes --]

Hi


Without this line in lilo.conf, resume will fail, (i think so).


append="acpi_sleep=s3_bios"



On Mon, Jan 10, 2005 at 11:19:29AM +0100, Tim Dijkstra wrote:
> On Fri, 7 Jan 2005 16:29:47 +0100
> mizu <michal-VaXaUECoPuY@public.gmane.org> wrote:
> 
> > i did not test S4 yet.
> > 
> > WHat kind of problem, do you have ?
> > What is the last message of your resume operation ?
> 
> I don't know;) Suspend seems to do what it's supposed to. But on resume,
> I hear the disk spin up again, but then nothing. Nothing on the screen
> (it's still of I think), but also no network, keyboard doesn't work. I
> think it locks up.
>  
> > my config is here as attachment.
> 
> I haven't build a new kernel yet, but looked at your config. I
> spotted two obvious differences. For one I boot with a initrd, don't
> know if that's a problem. Second, you didn't include the pcmcia/pccard
> subsystem. Doesn't you're machine have any pccard slots? a

Actually, i don't have any pcmcia card, so i've removed this drivers from
my kernel.
Try to build your kernel and sleep without pcmcia code.

see you

			
			mizu



-- 
              mizu
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
[-> E-mail:michal_AT_zimen_DOT_sk    
[-> ICQ:97165392
[-> WWW: http://michal.zimen.sk
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 189 bytes --]