Re: Smart Battery System driver

[Bruno Ducrot <ducrot-kk6yZipjEM5g9hUCZPvPmw@public.gmane.org>]

On Sat, Jan 15, 2005 at 12:13:03AM +0000, Matthew Garrett wrote:
> On Fri, 2005-01-14 at 14:23 -0500, Rich Townsend wrote:
> 
> > ...provides access to the SBS via a new /proc/acpi/sbs interface, and
> > also provides a "legacy" /proc/acpi/battery interface that current
> > battery-monitoring tools can access. This driver depends on Bruno's 
> > i2c-acpi-ec driver, which I have included with my source code since a 
> > couple of bug fixes were necessary.
> 
> One thing I've been meaning to ask - several Thinkpads have an
> interesting design issue, whereby reading certain smbus addresses can
> render the machine unbootable without a motherboard replacement. As a
> result, i2c-piix refuses to load on Thinkpads. Does something similar
> need to be done for i2c-acpi-ec, or does it only provide i2c access to
> devices connected to the embedded controller?
> 

The latter.  But its possible that devices connected may be
faulty.  I'm not aware of a thinkpad with such i2c access (though
its possible there is one than can be legacy).

-- 
Bruno Ducrot

--  Which is worse:  ignorance or apathy?
--  Don't know.  Don't care.


-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt