* HP-Compaq nx9110 laptop
@ 2005-03-23 16:56 Alexandre B
[not found] ` <200503231156.47279.wacky-kjdgaHvQH9ajKv3TNrM5DQ@public.gmane.org>
0 siblings, 1 reply; 2+ messages in thread
From: Alexandre B @ 2005-03-23 16:56 UTC (permalink / raw)
To: acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f
Hello list,
I've acquired an HP-Compaq nx9110 laptop recently and I tested everything and
found most of the parts working correctly .. sometimes with non-free drivers,
sometimes otherwise.
One thing still pending to work is the sleep/suspend/resume function. I
crawled the web for a while.. found the ACPI DSDT repository and tried
fiddling with the DSDT. I fixed a bug in it.. replaced it in an initrd but
that couldn't get the suspend/resume to work. I tried software suspend 2, but
it hanged all the time. Now I compiled the kernel with ACPI debugging and
tried:
echo 0xffffffff > /proc/acpi/debug_level
and watched what happened when I did:
echo 3 > /proc/acpi/sleep
or
echo mem > /sys/power/state
or anything with these pseudo-files. The thing is I see absolutely nothing in
the logs when I try these.. while when I close the laptop cover, a whole
bunch of stuff appears in the logs about the LID triggering events. Isn't
anything supposed to appear in the logs about ACPI when playing with these
files ?
I read a howto somewhere.. and it recommended to step in this mailing list for
suspend resume problems, since it seems it's still being developed. Is that
right ?
I was wondering if anyone could guide me to a solution, or help out getting
this to work.
Below are the outputs of:
dmidecode
lspci -vv
lsusb -vv
Thanks for any insights.
Alexandre Bourget
# dmidecode 2.4
SMBIOS 2.31 present.
36 structures occupying 1178 bytes.
Table at 0x000D7010.
Handle 0x0000
DMI type 0, 20 bytes.
BIOS Information
Vendor: Hewlett-Packard
Version: F.24
Release Date: 06/30/2004
Address: 0xE4F90
Runtime Size: 110704 bytes
ROM Size: 512 kB
Characteristics:
PCI is supported
PC Card (PCMCIA) is supported
PNP is supported
BIOS is upgradeable
BIOS shadowing is allowed
Boot from CD is supported
Selectable boot is supported
Print screen service is supported (int 5h)
8042 keyboard services are supported (int 9h)
Printer services are supported (int 17h)
CGA/mono video services are supported (int 10h)
ACPI is supported
USB legacy is supported
AGP is supported
LS-120 boot is supported
Smart battery is supported
Handle 0x0001
DMI type 1, 25 bytes.
System Information
Manufacturer: Hewlett-Packard
Product Name: Compaq nx9110 (PG425UA#ABC)
Version: F.24
Serial Number: CND4341939
UUID: E6E5B9BB-F205-11D8-A8D4-000FB00A6E7D
Wake-up Type: Power Switch
Handle 0x0002
DMI type 2, 8 bytes.
Base Board Information
Manufacturer: Hewlett-Packard
Product Name: 089C
Version: 31.36
Serial Number: CND4341939ABCDEF
Handle 0x0003
DMI type 3, 21 bytes.
Chassis Information
Manufacturer: Hewlett-Packard
Type: Notebook
Lock: Not Present
Version: Null
Serial Number: Null
Asset Tag:
Boot-up State: Safe
Power Supply State: Safe
Thermal State: Safe
Security Status: None
OEM Information: 0x00000000
Heigth: 52 U
Number Of Power Cords: 18
Contained Elements: 0
Handle 0x0004
DMI type 4, 35 bytes.
Processor Information
Socket Designation: JP8
Type: Central Processor
Family: Pentium 4
Manufacturer: GenuineIntel
ID: 29 0F 00 00 FF FB EB BF
Signature: Type 0, Family 15, Model 2, Stepping 9
Flags:
FPU (Floating-point unit on-chip)
VME (Virtual mode extension)
DE (Debugging extension)
PSE (Page size extension)
TSC (Time stamp counter)
MSR (Model specific registers)
PAE (Physical address extension)
MCE (Machine check exception)
CX8 (CMPXCHG8 instruction supported)
APIC (On-chip APIC hardware supported)
SEP (Fast system call)
MTRR (Memory type range registers)
PGE (Page global enable)
MCA (Machine check architecture)
CMOV (Conditional move instruction supported)
PAT (Page attribute table)
PSE-36 (36-bit page size extension)
CLFSH (CLFLUSH instruction supported)
DS (Debug store)
ACPI (ACPI supported)
MMX (MMX technology supported)
FXSR (Fast floating-point save and restore)
SSE (Streaming SIMD extensions)
SSE2 (Streaming SIMD extensions 2)
SS (Self-snoop)
HTT (Hyper-threading technology)
TM (Thermal monitor supported)
SBF (Signal break on FERR)
Version: Intel(R) Pentium(R) 4 CPU 3.00GHz
Voltage: 2.2 V
External Clock: Unknown
Max Speed: 3000 MHz
Current Speed: 3000 MHz
Status: Populated, Enabled
Upgrade: ZIF Socket
L1 Cache Handle: Not Provided
L2 Cache Handle: 0x0008
L3 Cache Handle: Not Provided
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Handle 0x0005
DMI type 5, 20 bytes.
Memory Controller Information
Error Detecting Method: None
Error Correcting Capabilities:
None
Supported Interleave: One-way Interleave
Current Interleave: One-way Interleave
Maximum Memory Module Size: 2048 MB
Maximum Total Memory Size: 4096 MB
Supported Speeds:
Other
Supported Memory Types:
DIMM
SDRAM
Memory Module Voltage: 3.3 V
Associated Memory Slots: 2
0x0006
0x0007
Enabled Error Correcting Capabilities:
Unknown
Handle 0x0006
DMI type 6, 12 bytes.
Memory Module Information
Socket Designation: Socket 0
Bank Connections: 0 2
Current Speed: 3 ns
Type: DIMM SDRAM
Installed Size: 256 MB (Single-bank Connection)
Enabled Size: 256 MB (Single-bank Connection)
Error Status: OK
Handle 0x0007
DMI type 6, 12 bytes.
Memory Module Information
Socket Designation: Socket 1
Bank Connections: 0 3
Current Speed: 3 ns
Type: DIMM SDRAM
Installed Size: 256 MB (Single-bank Connection)
Enabled Size: 256 MB (Single-bank Connection)
Error Status: OK
Handle 0x0008
DMI type 7, 19 bytes.
Cache Information
Socket Designation: L2 Cache
Configuration: Enabled, Socketed, Level 2
Operational Mode: Write Back
Location: Internal
Installed Size: 512 KB
Maximum Size: 1024 KB
Supported SRAM Types:
Burst
Pipeline Burst
Installed SRAM Type: Burst
Speed: Unknown
Error Correction Type: Unknown
System Type: Unknown
Associativity: Unknown
Handle 0x0009
DMI type 9, 13 bytes.
System Slot Information
Designation: PCI Slot J29
Type: 32-bit PC Card (PCMCIA)
Current Usage: Unknown
Length: Long
ID: Adapter 0, Socket 0
Characteristics:
5.0 V is provided
3.3 V is provided
PC Card-16 is supported
Cardbus is supported
Hot-plug devices are supported
Handle 0x000A
DMI type 9, 13 bytes.
System Slot Information
Designation: PCI Slot J30
Type: 32-bit PC Card (PCMCIA)
Current Usage: Unknown
Length: Long
ID: Adapter 0, Socket 0
Characteristics:
5.0 V is provided
3.3 V is provided
PC Card-16 is supported
Cardbus is supported
Hot-plug devices are supported
Handle 0x000B
DMI type 10, 6 bytes.
On Board Device Information
Type: Video
Status: Enabled
Description: 128 RS200M
Handle 0x000C
DMI type 11, 5 bytes.
OEM Strings
String 1: Warranty:
Handle 0x000D
DMI type 12, 5 bytes.
System Configuration Options
Option 1: Jumper settings can be described here.
Handle 0x000E
DMI type 16, 15 bytes.
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 1 GB
Error Information Handle: Not Provided
Number Of Devices: 2
Handle 0x000F
DMI type 17, 27 bytes.
Memory Device
Array Handle: 0x000E
Error Information Handle: No Error
Total Width: 32 bits
Data Width: 32 bits
Size: 256 MB
Form Factor: DIMM
Set: 1
Locator: U5
Bank Locator: Bank 0
Type: DRAM
Type Detail: Synchronous
Speed: Unknown
Manufacturer: Not Specified
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Handle 0x0010
DMI type 17, 27 bytes.
Memory Device
Array Handle: 0x000E
Error Information Handle: No Error
Total Width: 32 bits
Data Width: 32 bits
Size: 256 MB
Form Factor: DIMM
Set: 1
Locator: U6
Bank Locator: Bank 0
Type: DRAM
Type Detail: Synchronous
Speed: Unknown
Manufacturer: Not Specified
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Handle 0x0011
DMI type 18, 23 bytes.
32-bit Memory Error Information
Type: OKBad Read
Granularity: Unknown
Operation: Unknown
Vendor Syndrome: Unknown
Memory Array Address: Unknown
Device Address: Unknown
Resolution: Unknown
Handle 0x0012
DMI type 19, 15 bytes.
Memory Array Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0001FFFFFFF
Range Size: 512 MB
Physical Array Handle: 0x000E
Partition Width: 0
Handle 0x0013
DMI type 20, 19 bytes.
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0000FFFFFFF
Range Size: 256 MB
Physical Device Handle: 0x000F
Memory Array Mapped Address Handle: 0x0012
Partition Row Position: 2
Handle 0x0014
DMI type 22, 26 bytes.
Portable Battery
Location: Left Front
Manufacturer: Not Specified
Name: <BAD INDEX>
Design Capacity: Unknown
Design Voltage: Unknown
SBDS Version: Not Specified
Maximum Error: 0%
SBDS Serial Number: 0000
SBDS Manufacture Date: 1980-00-00
SBDS Chemistry: Not Specified
OEM-specific Information: 0x00000000
Handle 0x0015
DMI type 23, 13 bytes.
System Reset
Status: Enabled
Watchdog Timer: Present
Boot Option: Do Not Reboot
Boot Option On Limit: Do Not Reboot
Reset Count: Unknown
Reset Limit: Unknown
Timer Interval: Unknown
Timeout: Unknown
Handle 0x0016
DMI type 24, 5 bytes.
Hardware Security
Power-On Password Status: Disabled
Keyboard Password Status: Unknown
Administrator Password Status: Enabled
Front Panel Reset Status: Unknown
Handle 0x0017
DMI type 25, 9 bytes.
System Power Controls
Next Scheduled Power-on: 12-31 23:59:59
Handle 0x0018
DMI type 26, 22 bytes.
Voltage Probe
Description: Voltage Probe 1
Location: Processor
Status: OK
Maximum Value: Unknown
Minimum Value: Unknown
Resolution: Unknown
Tolerance: Unknown
Accuracy: Unknown
OEM-specific Information: 0x00000000
Nominal Value: 8.192 V
Handle 0x0019
DMI type 26, 20 bytes.
Voltage Probe
Description: Voltage Probe 2
Location: Processor
Status: OK
Maximum Value: Unknown
Minimum Value: Unknown
Resolution: Unknown
Tolerance: Unknown
Accuracy: Unknown
OEM-specific Information: 0x00000000
Handle 0x001A
DMI type 27, 14 bytes.
Cooling Device
Temperature Probe Handle: 0x001C
Type: Fan
Status: OK
Cooling Unit Group: 255
OEM-specific Information: 0x00000000
Nominal Speed: Unknown Or Non-rotating
Handle 0x001B
DMI type 27, 12 bytes.
Cooling Device
Temperature Probe Handle: 0x001C
Type: Fan
Status: OK
Cooling Unit Group: 255
OEM-specific Information: 0x00000000
Handle 0x001C
DMI type 28, 22 bytes.
Temperature Probe
Description: Temperature Probe 1
Location: Processor
Status: OK
Maximum Value: Unknown
Minimum Value Unknown
Resolution: Unknown
Tolerance: Unknown
Accuracy: Unknown
OEM-specific Information: 0x00000000
Nominal Value: Unknown
Handle 0x001D
DMI type 28, 20 bytes.
Temperature Probe
Description: Temperature Probe 2
Location: Processor
Status: OK
Maximum Value: Unknown
Minimum Value Unknown
Resolution: Unknown
Tolerance: Unknown
Accuracy: Unknown
OEM-specific Information: 0x00000000
Handle 0x001E
DMI type 29, 22 bytes.
Electrical Current Probe
Description: Electrical Current Probe 1
Location: Processor
Status: OK
Maximum Value: Unknown
Minimum Value: Unknown
Resolution: Unknown
Tolerance: Unknown
Accuracy: Unknown
OEM-specific Information: 0x00000000
Nominal Value: Unknown
Handle 0x001F
DMI type 29, 20 bytes.
Electrical Current Probe
Description: Electrical Current Probe 2
Location: Processor
Status: OK
Maximum Value: Unknown
Minimum Value: Unknown
Resolution: Unknown
Tolerance: Unknown
Accuracy: Unknown
OEM-specific Information: 0x00000000
Handle 0x0020
DMI type 30, 6 bytes.
Out-of-band Remote Access
Manufacturer Name: Intel
Inbound Connection: Enabled
Outbound Connection: Disabled
Handle 0x0021
DMI type 32, 20 bytes.
System Boot Information
Status: <OUT OF SPEC>
Handle 0x0022
DMI type 126, 4 bytes.
Inactive
Handle 0x0023
DMI type 127, 4 bytes.
End Of Table
00:00.0 Host bridge: ATI Technologies Inc: Unknown device 5833 (rev 02)
Subsystem: ATI Technologies Inc: Unknown device 1234
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Region 0: Memory at d2000000 (32-bit, prefetchable) [size=32M]
Region 1: Memory at d0000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [a0] AGP version 3.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans-
64bit- FW+ AGP3+ Rate=x4,x8
Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP- GART64- 64bit- FW-
Rate=<none>
00:01.0 PCI bridge: ATI Technologies Inc: Unknown device 5838 (prog-if 00
[Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 99
Bus: primary=00, secondary=01, subordinate=01, sec-latency=68
I/O behind bridge: 00009000-00009fff
Memory behind bridge: d0100000-d01fffff
Prefetchable memory behind bridge: e0000000-efffffff
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
00:13.0 USB Controller: ATI Technologies Inc: Unknown device 4347 (rev 01)
(prog-if 10 [OHCI])
Subsystem: ATI Technologies Inc: Unknown device 434c
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64, cache line size 08
Interrupt: pin A routed to IRQ 19
Region 0: Memory at d0001000 (32-bit, non-prefetchable) [size=4K]
00:13.1 USB Controller: ATI Technologies Inc: Unknown device 4348 (rev 01)
(prog-if 10 [OHCI])
Subsystem: ATI Technologies Inc: Unknown device 434c
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64, cache line size 08
Interrupt: pin A routed to IRQ 19
Region 0: Memory at d0002000 (32-bit, non-prefetchable) [size=4K]
00:14.0 SMBus: ATI Technologies Inc ATI SMBus (rev 16)
Subsystem: Hewlett-Packard Company: Unknown device 006b
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Region 0: I/O ports at 8040 [size=16]
Region 1: Memory at 18000000 (32-bit, non-prefetchable) [size=1K]
00:14.1 IDE interface: ATI Technologies Inc: Unknown device 4349 (prog-if 8a
[Master SecP PriP])
Subsystem: ATI Technologies Inc: Unknown device 4349
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort+
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at <ignored>
Region 1: I/O ports at <ignored>
Region 2: I/O ports at <ignored>
Region 3: I/O ports at <ignored>
Region 4: I/O ports at 8060 [size=16]
00:14.3 ISA bridge: ATI Technologies Inc: Unknown device 434c
Subsystem: ATI Technologies Inc: Unknown device 434c
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:14.4 PCI bridge: ATI Technologies Inc: Unknown device 4342 (prog-if 01
[Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=02, subordinate=04, sec-latency=69
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: d0200000-d02fffff
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
00:14.5 Multimedia audio controller: ATI Technologies Inc IXP150 AC'97 Audio
Controller
Subsystem: Hewlett-Packard Company: Unknown device 006b
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (500ns min), cache line size 08
Interrupt: pin B routed to IRQ 5
Region 0: Memory at d0003000 (32-bit, non-prefetchable) [size=256]
00:14.6 Modem: ATI Technologies Inc IXP AC'97 Modem (rev 01) (prog-if 00
[Generic])
Subsystem: Hewlett-Packard Company: Unknown device 006b
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 5
Region 0: Memory at d0003400 (32-bit, non-prefetchable) [size=256]
01:05.0 VGA compatible controller: ATI Technologies Inc: Unknown device 5835
(prog-if 00 [VGA])
Subsystem: Hewlett-Packard Company: Unknown device 006b
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B+
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 66 (2000ns min), cache line size 08
Interrupt: pin A routed to IRQ 16
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=256M]
Region 1: I/O ports at 9000 [size=256]
Region 2: Memory at d0100000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [58] AGP version 3.0
Status: RQ=256 Iso- ArqSz=0 Cal=7 SBA+ ITACoh- GART64- HTrans-
64bit+ FW+ AGP3+ Rate=x4,x8
Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP- GART64- 64bit- FW-
Rate=<none>
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:00.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21 IEEE-1394a-2000
Controller (PHY/Link) (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company: Unknown device 006b
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (500ns min, 1000ns max), cache line size 08
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d0216000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at d0210000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME+
02:02.0 Ethernet controller: Atheros Communications, Inc. AR5212 802.11abg NIC
(rev 01)
Subsystem: Compaq Computer Corporation: Unknown device 00e5
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 168 (2500ns min, 7000ns max), cache line size 08
Interrupt: pin A routed to IRQ 18
Region 0: Memory at d0200000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
02:03.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Hewlett-Packard Company: Unknown device 006b
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 128 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at a000 [size=256]
Region 1: Memory at d0216800 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:04.0 CardBus bridge: Texas Instruments PCI1620 PC Card Controller (rev 01)
Subsystem: Hewlett-Packard Company: Unknown device 006b
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64, cache line size 08
Interrupt: pin A routed to IRQ 10
Region 0: Memory at 18001000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
I/O window 0: 00000000-00000003
I/O window 1: 00000000-00000003
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite-
16-bit legacy interface ports at 0001
02:04.1 CardBus bridge: Texas Instruments PCI1620 PC Card Controller (rev 01)
Subsystem: Hewlett-Packard Company: Unknown device 006b
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 10
Region 0: Memory at 18002000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=07, subordinate=0a, sec-latency=176
I/O window 0: 00000000-00000003
I/O window 1: 00000000-00000003
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite-
16-bit legacy interface ports at 0001
02:04.2 System peripheral: Texas Instruments PCI1620 Firmware Loading Function
(rev 01)
Subsystem: Hewlett-Packard Company: Unknown device 006b
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (1750ns min, 1000ns max), cache line size 08
Region 0: I/O ports at a400 [size=64]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:07.0 USB Controller: NEC Corporation USB (rev 43) (prog-if 10 [OHCI])
Subsystem: NEC Corporation USB
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (250ns min, 10500ns max), cache line size 08
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d0214000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:07.1 USB Controller: NEC Corporation USB (rev 43) (prog-if 10 [OHCI])
Subsystem: NEC Corporation USB
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (250ns min, 10500ns max), cache line size 08
Interrupt: pin B routed to IRQ 18
Region 0: Memory at d0215000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:07.2 USB Controller: NEC Corporation USB 2.0 (rev 04) (prog-if 20 [EHCI])
Subsystem: NEC Corporation USB 2.0
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (4000ns min, 8500ns max), cache line size 20
Interrupt: pin C routed to IRQ 19
Region 0: Memory at d0216c00 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Bus 005 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0
bDeviceProtocol 1
bMaxPacketSize0 8
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 Linux 2.6.11-rc3 ehci_hcd
iProduct 2 EHCI Host Controller
iSerial 1 0000:02:07.2
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type none
wMaxPacketSize 2
bInterval 12
Language IDs: (length=4)
0409 English(US)
Bus 004 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 Linux 2.6.11-rc3 ohci_hcd
iProduct 2 OHCI Host Controller
iSerial 1 0000:02:07.1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type none
wMaxPacketSize 2
bInterval 255
Language IDs: (length=4)
0409 English(US)
Bus 003 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 Linux 2.6.11-rc3 ohci_hcd
iProduct 2 OHCI Host Controller
iSerial 1 0000:02:07.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type none
wMaxPacketSize 2
bInterval 255
Language IDs: (length=4)
0409 English(US)
Bus 002 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 Linux 2.6.11-rc3 ohci_hcd
iProduct 2 OHCI Host Controller
iSerial 1 0000:00:13.1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type none
wMaxPacketSize 2
bInterval 255
Language IDs: (length=4)
0409 English(US)
Bus 001 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 Linux 2.6.11-rc3 ohci_hcd
iProduct 2 OHCI Host Controller
iSerial 1 0000:00:13.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type none
wMaxPacketSize 2
bInterval 255
Language IDs: (length=4)
0409 English(US)
I copy here the outputs
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: HP-Compaq nx9110 laptop
[not found] ` <200503231156.47279.wacky-kjdgaHvQH9ajKv3TNrM5DQ@public.gmane.org>
@ 2005-03-25 8:18 ` Pavel Machek
0 siblings, 0 replies; 2+ messages in thread
From: Pavel Machek @ 2005-03-25 8:18 UTC (permalink / raw)
To: Alexandre B; +Cc: acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f
Hi!
> I've acquired an HP-Compaq nx9110 laptop recently and I tested everything and
> found most of the parts working correctly .. sometimes with non-free drivers,
> sometimes otherwise.
>
> One thing still pending to work is the sleep/suspend/resume function. I
> crawled the web for a while.. found the ACPI DSDT repository and tried
> fiddling with the DSDT. I fixed a bug in it.. replaced it in an initrd but
> that couldn't get the suspend/resume to work. I tried software suspend 2, but
> it hanged all the time. Now I compiled the kernel with ACPI debugging and
> tried:
>
> echo 0xffffffff > /proc/acpi/debug_level
>
> and watched what happened when I did:
>
> echo 3 > /proc/acpi/sleep
> or
> echo mem > /sys/power/state
>
> or anything with these pseudo-files. The thing is I see absolutely nothing in
> the logs when I try these.. while when I close the laptop cover, a whole
> bunch of stuff appears in the logs about the LID triggering events. Isn't
> anything supposed to appear in the logs about ACPI when playing with these
> files ?
>
> I read a howto somewhere.. and it recommended to step in this mailing list for
> suspend resume problems, since it seems it's still being developed. Is that
> right ?
>
> I was wondering if anyone could guide me to a solution, or help out getting
> this to work.
>
> Below are the outputs of:
> dmidecode
> lspci -vv
> lsusb -vv
>
>
> Thanks for any insights.
Try getting swsusp to work, first.
Pavel
--
People were complaining that M$ turns users into beta-testers...
...jr ghea gurz vagb qrirybcref, naq gurl frrz gb yvxr vg gung jnl!
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2005-03-25 8:18 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-03-23 16:56 HP-Compaq nx9110 laptop Alexandre B
[not found] ` <200503231156.47279.wacky-kjdgaHvQH9ajKv3TNrM5DQ@public.gmane.org>
2005-03-25 8:18 ` Pavel Machek
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox