Re: 2.6.12-rc1-mm[1-3]: ACPI battery monitor does not work

["Rafael J. Wysocki" <rjw-KKrjLPT3xs0@public.gmane.org>]

On Wednesday, 30 of March 2005 07:53, Yu, Luming wrote:
> On Tuesday 29 March 2005 17:56, Rafael J. Wysocki wrote:
> > Hi,
> >
> > There is a problem on my box (Asus L5D, x86-64 kernel) with the ACPI
> > battery driver in the 2.6.12-rc1-mm[1-3] kernels.  Namely, the battery
> > monitor that I use (the kpowersave applet from SUSE 9.2) is no longer able
> > to report the battery status (ie how much % it is loaded).  It can only
> > check if the AC power is connected (if it is connected, kpowersave behaves
> > as though there was no battery in the box, and if it is not connected,
> > kpowersave always shows that the battery is 1% loaded).
> >
> > Also, there are big latencies on loading and accessing the battery module,
> > but the module loads successfully and there's nothing suspicious in dmesg.
> >
> > Please let me know if you need any additional information.
> >
> > Greets,
> > Rafael
> 
> Could you just revert ec-mode patch, then retest?

Could you please point me to it?

Rafael


-- 
- Would you tell me, please, which way I ought to go from here?
- That depends a good deal on where you want to get to.
		-- Lewis Carroll "Alice's Adventures in Wonderland"


-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click