* [PATCH] Enable C2/C3 on SMP systems
@ 2005-04-02 1:41 Venkatesh Pallipadi
0 siblings, 0 replies; only message in thread
From: Venkatesh Pallipadi @ 2005-04-02 1:41 UTC (permalink / raw)
To: acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f; +Cc: Len Brown
Attached patch enables C2/C3 on SMP systems. Please review and let me know
your comments.
Thanks,
Venki
Currently, C2/C3 is supported on UP systems only. This patch adds support
for C2/C3 on SMP systems.
http://bugme.osdl.org/show_bug.cgi?id=4401
has some history on this.
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
diff -purN linux-2.6.12-rc1-org/arch/i386/kernel/acpi/cstate.c linux-2.6.12-rc1-org-patch/arch/i386/kernel/acpi/cstate.c
--- linux-2.6.12-rc1-org/arch/i386/kernel/acpi/cstate.c 1969-12-31 16:00:00.000000000 -0800
+++ linux-2.6.12-rc1-org-patch/arch/i386/kernel/acpi/cstate.c 2005-04-01 13:30:43.000000000 -0800
@@ -0,0 +1,71 @@
+/*
+ * arch/i386/kernel/acpi/cstate.c
+ *
+ * Copyright (C) 2005 Intel Corporation
+ * Venkatesh Pallipadi <venkatesh.pallipadi-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
+ * - Added _PDC for SMP C-states on Intel CPUs
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/acpi.h>
+
+#include <acpi/processor.h>
+#include <asm/acpi.h>
+
+static void acpi_processor_power_init_intel_pdc(
+ struct acpi_processor_power *pow)
+{
+ struct acpi_object_list *obj_list;
+ union acpi_object *obj;
+ u32 *buf;
+
+ /* allocate and initialize pdc. It will be used later. */
+ obj_list = kmalloc(sizeof(struct acpi_object_list), GFP_KERNEL);
+ if (!obj_list) {
+ printk(KERN_ERR "Memory allocation error\n");
+ return;
+ }
+
+ obj = kmalloc(sizeof(union acpi_object), GFP_KERNEL);
+ if (!obj) {
+ printk(KERN_ERR "Memory allocation error\n");
+ kfree(obj_list);
+ return;
+ }
+
+ buf = kmalloc(12, GFP_KERNEL);
+ if (!buf) {
+ printk(KERN_ERR "Memory allocation error\n");
+ kfree(obj);
+ kfree(obj_list);
+ return;
+ }
+
+ buf[0] = ACPI_PDC_REVISION_ID;
+ buf[1] = 1;
+ buf[2] = ACPI_PDC_C_CAPABILITY_SMP;
+
+ obj->type = ACPI_TYPE_BUFFER;
+ obj->buffer.length = 12;
+ obj->buffer.pointer = (u8 *)buf;
+ obj_list->count = 1;
+ obj_list->pointer = obj;
+ pow->pdc = obj_list;
+
+ return;
+}
+
+void acpi_processor_power_init_pdc(struct acpi_processor_power *pow,
+ unsigned int cpu)
+{
+ struct cpuinfo_x86 *c = cpu_data + cpu;
+
+ pow->pdc = NULL;
+ if (c->x86_vendor == X86_VENDOR_INTEL)
+ acpi_processor_power_init_intel_pdc(pow);
+
+ return;
+}
+EXPORT_SYMBOL(acpi_processor_power_init_pdc);
diff -purN linux-2.6.12-rc1-org/arch/i386/kernel/acpi/Makefile linux-2.6.12-rc1-org-patch/arch/i386/kernel/acpi/Makefile
--- linux-2.6.12-rc1-org/arch/i386/kernel/acpi/Makefile 2005-03-01 23:38:09.000000000 -0800
+++ linux-2.6.12-rc1-org-patch/arch/i386/kernel/acpi/Makefile 2005-04-01 13:22:02.000000000 -0800
@@ -2,3 +2,7 @@ obj-$(CONFIG_ACPI_BOOT) := boot.o
obj-$(CONFIG_X86_IO_APIC) += earlyquirk.o
obj-$(CONFIG_ACPI_SLEEP) += sleep.o wakeup.o
+ifneq ($(CONFIG_ACPI_PROCESSOR),)
+obj-y += cstate.o
+endif
+
diff -purN linux-2.6.12-rc1-org/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c linux-2.6.12-rc1-org-patch/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c
--- linux-2.6.12-rc1-org/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c 2005-04-01 11:50:15.000000000 -0800
+++ linux-2.6.12-rc1-org-patch/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c 2005-04-01 11:55:16.000000000 -0800
@@ -369,7 +369,7 @@ static int centrino_cpu_init_acpi(struct
arg0.buffer.pointer = (u8 *) arg0_buf;
arg0_buf[0] = ACPI_PDC_REVISION_ID;
arg0_buf[1] = 1;
- arg0_buf[2] = ACPI_PDC_EST_CAPABILITY_SMP | ACPI_PDC_EST_CAPABILITY_MSR;
+ arg0_buf[2] = ACPI_PDC_EST_CAPABILITY_SMP_MSR;
p.pdc = &arg_list;
diff -purN linux-2.6.12-rc1-org/drivers/acpi/processor_core.c linux-2.6.12-rc1-org-patch/drivers/acpi/processor_core.c
--- linux-2.6.12-rc1-org/drivers/acpi/processor_core.c 2005-04-01 11:50:15.000000000 -0800
+++ linux-2.6.12-rc1-org-patch/drivers/acpi/processor_core.c 2005-04-01 11:55:16.000000000 -0800
@@ -256,6 +256,43 @@ acpi_processor_errata (
/* --------------------------------------------------------------------------
+ Common ACPI processor fucntions
+ -------------------------------------------------------------------------- */
+
+/*
+ * _PDC is required for a BIOS-OS handshake for most of the newer
+ * ACPI processor features.
+ */
+
+int acpi_processor_set_pdc(struct acpi_processor *pr,
+ struct acpi_object_list *pdc_in)
+{
+ acpi_status status = AE_OK;
+ u32 arg0_buf[3];
+ union acpi_object arg0 = {ACPI_TYPE_BUFFER};
+ struct acpi_object_list no_object = {1, &arg0};
+ struct acpi_object_list *pdc;
+
+ ACPI_FUNCTION_TRACE("acpi_processor_set_pdc");
+
+ arg0.buffer.length = 12;
+ arg0.buffer.pointer = (u8 *) arg0_buf;
+ arg0_buf[0] = ACPI_PDC_REVISION_ID;
+ arg0_buf[1] = 0;
+ arg0_buf[2] = 0;
+
+ pdc = (pdc_in) ? pdc_in : &no_object;
+
+ status = acpi_evaluate_object(pr->handle, "_PDC", pdc, NULL);
+
+ if ((ACPI_FAILURE(status)) && (pdc_in))
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Error evaluating _PDC, using legacy perf. control...\n"));
+
+ return_VALUE(status);
+}
+
+
+/* --------------------------------------------------------------------------
FS Interface (/proc)
-------------------------------------------------------------------------- */
diff -purN linux-2.6.12-rc1-org/drivers/acpi/processor_idle.c linux-2.6.12-rc1-org-patch/drivers/acpi/processor_idle.c
--- linux-2.6.12-rc1-org/drivers/acpi/processor_idle.c 2005-04-01 11:50:15.000000000 -0800
+++ linux-2.6.12-rc1-org-patch/drivers/acpi/processor_idle.c 2005-04-01 13:27:27.000000000 -0800
@@ -6,6 +6,8 @@
* Copyright (C) 2004 Dominik Brodowski <linux-JhLEnvuH02M@public.gmane.org>
* Copyright (C) 2004 Anil S Keshavamurthy <anil.s.keshavamurthy-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
* - Added processor hotplug support
+ * Copyright (C) 2005 Venkatesh Pallipadi <venkatesh.pallipadi-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
+ * - Added support for C3 on SMP
*
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*
@@ -142,7 +144,7 @@ acpi_processor_power_activate (
switch (old->type) {
case ACPI_STATE_C3:
/* Disable bus master reload */
- if (new->type != ACPI_STATE_C3)
+ if (new->type != ACPI_STATE_C3 && pr->flags.bm_check)
acpi_set_register(ACPI_BITREG_BUS_MASTER_RLD, 0, ACPI_MTX_DO_NOT_LOCK);
break;
}
@@ -152,7 +154,7 @@ acpi_processor_power_activate (
switch (new->type) {
case ACPI_STATE_C3:
/* Enable bus master reload */
- if (old->type != ACPI_STATE_C3)
+ if (old->type != ACPI_STATE_C3 && pr->flags.bm_check)
acpi_set_register(ACPI_BITREG_BUS_MASTER_RLD, 1, ACPI_MTX_DO_NOT_LOCK);
break;
}
@@ -297,8 +299,16 @@ static void acpi_processor_idle (void)
break;
case ACPI_STATE_C3:
- /* Disable bus master arbitration */
- acpi_set_register(ACPI_BITREG_ARB_DISABLE, 1, ACPI_MTX_DO_NOT_LOCK);
+
+ if (pr->flags.bm_check) {
+ /* Disable bus master arbitration */
+ acpi_set_register(ACPI_BITREG_ARB_DISABLE, 1,
+ ACPI_MTX_DO_NOT_LOCK);
+ } else {
+ /* SMP case. Flush caches before C3. */
+ ACPI_FLUSH_CPU_CACHE();
+ }
+
/* Get start time (ticks) */
t1 = inl(acpi_fadt.xpm_tmr_blk.address);
/* Invoke C3 */
@@ -307,8 +317,11 @@ static void acpi_processor_idle (void)
t2 = inl(acpi_fadt.xpm_tmr_blk.address);
/* Get end time (ticks) */
t2 = inl(acpi_fadt.xpm_tmr_blk.address);
- /* Enable bus master arbitration */
- acpi_set_register(ACPI_BITREG_ARB_DISABLE, 0, ACPI_MTX_DO_NOT_LOCK);
+ if (pr->flags.bm_check) {
+ /* Enable bus master arbitration */
+ acpi_set_register(ACPI_BITREG_ARB_DISABLE, 0, ACPI_MTX_DO_NOT_LOCK);
+ }
+
/* Re-enable interrupts */
local_irq_enable();
/* Compute time (ticks) that we were actually asleep */
@@ -529,9 +542,6 @@ static int acpi_processor_get_power_info
ACPI_FUNCTION_TRACE("acpi_processor_get_power_info_cst");
- if (errata.smp)
- return_VALUE(-ENODEV);
-
if (nocst)
return_VALUE(-ENODEV);
@@ -664,13 +674,6 @@ static void acpi_processor_power_verify_
return_VOID;
}
- /* We're (currently) only supporting C2 on UP */
- else if (errata.smp) {
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "C2 not supported in SMP mode\n"));
- return_VOID;
- }
-
/*
* Otherwise we've met all of our C2 requirements.
* Normalize the C2 latency to expidite policy
@@ -692,6 +695,17 @@ static void acpi_processor_power_verify_
return_VOID;
/*
+ * WBINVD should be set in fadt, for C3 state to be supported on
+ * SMP system.
+ */
+ else if ((num_online_cpus() > 1) && (acpi_fadt.wb_invd != 1)) {
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+ "Cache invalidation should work properly"
+ " for C3 to be enabled on SMP systems\n"));
+ return_VOID;
+ }
+
+ /*
* C3 latency must be less than or equal to 1000
* microseconds.
*/
@@ -703,19 +717,12 @@ static void acpi_processor_power_verify_
}
/* bus mastering control is necessary */
- else if (!pr->flags.bm_control) {
+ else if ((num_online_cpus() == 1) && !pr->flags.bm_control) {
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"C3 support requires bus mastering control\n"));
return_VOID;
}
- /* We're (currently) only supporting C2 on UP */
- else if (errata.smp) {
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "C3 not supported in SMP mode\n"));
- return_VOID;
- }
-
/*
* PIIX4 Erratum #18: We don't support C3 when Type-F (fast)
* DMA transfers are used by any ISA device to avoid livelock.
@@ -737,7 +744,17 @@ static void acpi_processor_power_verify_
*/
cx->valid = 1;
cx->latency_ticks = US_TO_PM_TIMER_TICKS(cx->latency);
- pr->flags.bm_check = 1;
+
+ /*
+ * bm_check is only needed for C3 on UP.
+ * On SMP we invalidate cache before entering C3.
+ */
+ if (num_online_cpus() == 1) {
+ pr->flags.bm_check = 1;
+ } else {
+ acpi_set_register(ACPI_BITREG_BUS_MASTER_RLD,
+ 0, ACPI_MTX_DO_NOT_LOCK);
+ }
return_VOID;
}
@@ -829,7 +846,7 @@ int acpi_processor_cst_has_changed (stru
if (!pr)
return_VALUE(-EINVAL);
- if (errata.smp || nocst) {
+ if ( nocst) {
return_VALUE(-ENODEV);
}
@@ -929,7 +946,6 @@ static struct file_operations acpi_proce
.release = single_release,
};
-
int acpi_processor_power_init(struct acpi_processor *pr, struct acpi_device *device)
{
acpi_status status = 0;
@@ -946,7 +962,10 @@ int acpi_processor_power_init(struct acp
first_run++;
}
- if (!errata.smp && (pr->id == 0) && acpi_fadt.cst_cnt && !nocst) {
+ if (!pr)
+ return_VALUE(-EINVAL);
+
+ if (acpi_fadt.cst_cnt && !nocst) {
status = acpi_os_write_port(acpi_fadt.smi_cmd, acpi_fadt.cst_cnt, 8);
if (ACPI_FAILURE(status)) {
ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
@@ -954,6 +973,8 @@ int acpi_processor_power_init(struct acp
}
}
+ acpi_processor_power_init_pdc(&(pr->power), pr->id);
+ acpi_processor_set_pdc(pr, pr->power.pdc);
acpi_processor_get_power_info(pr);
/*
diff -purN linux-2.6.12-rc1-org/drivers/acpi/processor_perflib.c linux-2.6.12-rc1-org-patch/drivers/acpi/processor_perflib.c
--- linux-2.6.12-rc1-org/drivers/acpi/processor_perflib.c 2005-04-01 11:50:15.000000000 -0800
+++ linux-2.6.12-rc1-org-patch/drivers/acpi/processor_perflib.c 2005-04-01 11:55:16.000000000 -0800
@@ -165,37 +165,6 @@ void acpi_processor_ppc_exit(void) {
acpi_processor_ppc_status &= ~PPC_REGISTERED;
}
-/*
- * when registering a cpufreq driver with this ACPI processor driver, the
- * _PCT and _PSS structures are read out and written into struct
- * acpi_processor_performance.
- */
-static int acpi_processor_set_pdc (struct acpi_processor *pr)
-{
- acpi_status status = AE_OK;
- u32 arg0_buf[3];
- union acpi_object arg0 = {ACPI_TYPE_BUFFER};
- struct acpi_object_list no_object = {1, &arg0};
- struct acpi_object_list *pdc;
-
- ACPI_FUNCTION_TRACE("acpi_processor_set_pdc");
-
- arg0.buffer.length = 12;
- arg0.buffer.pointer = (u8 *) arg0_buf;
- arg0_buf[0] = ACPI_PDC_REVISION_ID;
- arg0_buf[1] = 0;
- arg0_buf[2] = 0;
-
- pdc = (pr->performance->pdc) ? pr->performance->pdc : &no_object;
-
- status = acpi_evaluate_object(pr->handle, "_PDC", pdc, NULL);
-
- if ((ACPI_FAILURE(status)) && (pr->performance->pdc))
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Error evaluating _PDC, using legacy perf. control...\n"));
-
- return_VALUE(status);
-}
-
static int
acpi_processor_get_performance_control (
@@ -357,7 +326,7 @@ acpi_processor_get_performance_info (
if (!pr || !pr->performance || !pr->handle)
return_VALUE(-EINVAL);
- acpi_processor_set_pdc(pr);
+ acpi_processor_set_pdc(pr, pr->performance->pdc);
status = acpi_get_handle(pr->handle, "_PCT", &handle);
if (ACPI_FAILURE(status)) {
diff -purN linux-2.6.12-rc1-org/include/acpi/pdc_intel.h linux-2.6.12-rc1-org-patch/include/acpi/pdc_intel.h
--- linux-2.6.12-rc1-org/include/acpi/pdc_intel.h 1969-12-31 16:00:00.000000000 -0800
+++ linux-2.6.12-rc1-org-patch/include/acpi/pdc_intel.h 2005-04-01 12:17:29.000000000 -0800
@@ -0,0 +1,29 @@
+
+/* _PDC bit definition for Intel processors */
+
+#ifndef __PDC_INTEL_H__
+#define __PDC_INTEL_H__
+
+#define ACPI_PDC_P_FFH (0x0001)
+#define ACPI_PDC_C_C1_HALT (0x0002)
+#define ACPI_PDC_T_FFH (0x0004)
+#define ACPI_PDC_SMP_C1PT (0x0008)
+#define ACPI_PDC_SMP_C2C3 (0x0010)
+#define ACPI_PDC_SMP_P_SWCOORD (0x0020)
+#define ACPI_PDC_SMP_C_SWCOORD (0x0040)
+#define ACPI_PDC_SMP_T_SWCOORD (0x0080)
+#define ACPI_PDC_C_C1_FFH (0x0100)
+
+
+#define ACPI_PDC_EST_CAPABILITY_SMP (ACPI_PDC_SMP_C1PT | \
+ ACPI_PDC_C_C1_HALT)
+
+#define ACPI_PDC_EST_CAPABILITY_SMP_MSR (ACPI_PDC_EST_CAPABILITY_SMP | \
+ ACPI_PDC_P_FFH)
+
+#define ACPI_PDC_C_CAPABILITY_SMP (ACPI_PDC_SMP_C2C3 | \
+ ACPI_PDC_SMP_C1PT | \
+ ACPI_PDC_C_C1_HALT)
+
+#endif /* __PDC_INTEL_H__ */
+
diff -purN linux-2.6.12-rc1-org/include/acpi/processor.h linux-2.6.12-rc1-org-patch/include/acpi/processor.h
--- linux-2.6.12-rc1-org/include/acpi/processor.h 2005-04-01 11:50:15.000000000 -0800
+++ linux-2.6.12-rc1-org-patch/include/acpi/processor.h 2005-04-01 13:26:59.000000000 -0800
@@ -4,6 +4,8 @@
#include <linux/kernel.h>
#include <linux/config.h>
+#include <asm/acpi.h>
+
#define ACPI_PROCESSOR_BUSY_METRIC 10
#define ACPI_PROCESSOR_MAX_POWER 8
@@ -14,6 +16,8 @@
#define ACPI_PROCESSOR_MAX_THROTTLE 250 /* 25% */
#define ACPI_PROCESSOR_MAX_DUTY_WIDTH 4
+#define ACPI_PDC_REVISION_ID 0x1
+
/* Power Management */
struct acpi_processor_cx;
@@ -59,6 +63,9 @@ struct acpi_processor_power {
u32 bm_activity;
int count;
struct acpi_processor_cx states[ACPI_PROCESSOR_MAX_POWER];
+
+ /* the _PDC objects passed by the driver, if any */
+ struct acpi_object_list *pdc;
};
/* Performance Management */
@@ -82,8 +89,6 @@ struct acpi_processor_px {
acpi_integer status; /* success indicator */
};
-#define ACPI_PDC_REVISION_ID 0x1
-
struct acpi_processor_performance {
unsigned int state;
unsigned int platform_limit;
@@ -179,7 +184,23 @@ int acpi_processor_notify_smm(struct mod
extern struct acpi_processor *processors[NR_CPUS];
extern struct acpi_processor_errata errata;
+int acpi_processor_set_pdc(struct acpi_processor *pr,
+ struct acpi_object_list *pdc_in);
+
+#ifdef ARCH_HAS_POWER_PDC_INIT
+void acpi_processor_power_init_pdc(struct acpi_processor_power *pow,
+ unsigned int cpu);
+#else
+static inline void acpi_processor_power_init_pdc(
+ struct acpi_processor_power *pow, unsigned int cpu)
+{
+ pow->pdc = NULL;
+ return;
+}
+#endif
+
/* in processor_perflib.c */
+
#ifdef CONFIG_CPU_FREQ
void acpi_processor_ppc_init(void);
void acpi_processor_ppc_exit(void);
diff -purN linux-2.6.12-rc1-org/include/asm-i386/acpi.h linux-2.6.12-rc1-org-patch/include/asm-i386/acpi.h
--- linux-2.6.12-rc1-org/include/asm-i386/acpi.h 2005-04-01 11:50:15.000000000 -0800
+++ linux-2.6.12-rc1-org-patch/include/asm-i386/acpi.h 2005-04-01 12:23:55.000000000 -0800
@@ -28,6 +28,8 @@
#ifdef __KERNEL__
+#include <acpi/pdc_intel.h>
+
#include <asm/system.h> /* defines cmpxchg */
#define COMPILER_DEPENDENT_INT64 long long
@@ -101,12 +103,6 @@ __acpi_release_global_lock (unsigned int
:"=r"(n_hi), "=r"(n_lo) \
:"0"(n_hi), "1"(n_lo))
-/*
- * Refer Intel ACPI _PDC support document for bit definitions
- */
-#define ACPI_PDC_EST_CAPABILITY_SMP 0xa
-#define ACPI_PDC_EST_CAPABILITY_MSR 0x1
-
#ifdef CONFIG_ACPI_BOOT
extern int acpi_lapic;
extern int acpi_ioapic;
@@ -185,6 +181,8 @@ extern void acpi_reserve_bootmem(void);
extern u8 x86_acpiid_to_apicid[];
+#define ARCH_HAS_POWER_PDC_INIT 1
+
#endif /*__KERNEL__*/
#endif /*_ASM_ACPI_H*/
diff -purN linux-2.6.12-rc1-org/include/asm-x86_64/acpi.h linux-2.6.12-rc1-org-patch/include/asm-x86_64/acpi.h
--- linux-2.6.12-rc1-org/include/asm-x86_64/acpi.h 2005-04-01 11:50:15.000000000 -0800
+++ linux-2.6.12-rc1-org-patch/include/asm-x86_64/acpi.h 2005-04-01 12:22:57.000000000 -0800
@@ -28,6 +28,8 @@
#ifdef __KERNEL__
+#include <acpi/pdc_intel.h>
+
#define COMPILER_DEPENDENT_INT64 long long
#define COMPILER_DEPENDENT_UINT64 unsigned long long
@@ -99,12 +101,6 @@ __acpi_release_global_lock (unsigned int
:"=r"(n_hi), "=r"(n_lo) \
:"0"(n_hi), "1"(n_lo))
-/*
- * Refer Intel ACPI _PDC support document for bit definitions
- */
-#define ACPI_PDC_EST_CAPABILITY_SMP 0xa
-#define ACPI_PDC_EST_CAPABILITY_MSR 0x1
-
#ifdef CONFIG_ACPI_BOOT
extern int acpi_lapic;
extern int acpi_ioapic;
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2005-04-02 1:41 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-04-02 1:41 [PATCH] Enable C2/C3 on SMP systems Venkatesh Pallipadi
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox