Re: Re: Centrino not scaling to lowest frequency

[Felix Homann <fexpop-53koH/AXb86i2/dY4+mD5w@public.gmane.org>]

Thanks Johan,

actually I'm quite sure that the CPU frequencies in the DSDT are wrong. 
Unfortunately I can't figure out where they are defined in the DSDT. 

Neither the dissassembled original DSDT nor the custom one (which adds battery 
read-out support) contain any _PSS entries. Isn't that what I should be 
looking for?

Where else might frequencies be defined in the DSDT?

Thanks again,

Felix

On Tuesday 16 August 2005 10:44, Johan Vromans wrote:
> Felix Homann <fexpop-53koH/AXb86i2/dY4+mD5w@public.gmane.org> writes:
> > $ cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies
> > 1600000 1333000 1067000 800000
>
> On my Acer Travelmate 4001WLMi the CPU frequencies in the DSDT were
> wrong. Did you check you have the right DSDT and frequencies?
>
> -- Johan
>
> See also:
> http://www.squirrel.nl/people/jvromans/articles/TM4001WLMi/acpi/speedstep.h
>tml


-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO
September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf