From mboxrd@z Thu Jan 1 00:00:00 1970 From: Elliott Martin Subject: help troubleshooting Date: Wed, 7 Sep 2005 11:01:26 -0700 Message-ID: <200509071101.27211.johnelliottmartin@gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Content-Disposition: inline Sender: acpi-devel-admin-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org Errors-To: acpi-devel-admin-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org List-Unsubscribe: , List-Post: List-Help: List-Subscribe: , List-Archive: To: acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org List-Id: linux-acpi@vger.kernel.org Hello, I just upgraded to the 2.6.13 kernel and I am now seeing new ACPI errors during boot up and I was wondering if I could get some help. I have fixed every problem with my DSDT so far, but this is a little more difficult. My question is, how do I find out exactly what is failing from these messages: ACPI-0423: *** Error: Handler for [EmbeddedControl] returned AE_TIME ACPI-1172: *** Error: Method execution failed [\_SB_.PCI0.SBRG.EC0_.RWRD] (Node ddfba4e0), AE_TIME ACPI-1172: *** Error: Method execution failed [\_SB_.PCI0.BAT0.BIF1] (Node ddfba1a0), AE_TIME ACPI-1172: *** Error: Method execution failed [\_SB_.PCI0.BAT0._BIF] (Node ddfba320), AE_TIME I have looked through the code, and I think the BIF1 and _BIF methods fail because they call the RWRD method, so if I fix that I should be alright, but I don't know what in the RWRD method is bad. Can I use that node information from above to find out where in the DSDT the problem is occuring? -Elliott ------------------------------------------------------- SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf