hard drive errors on acpi s3 resume

sdfa
2005-11-04T06:39:46Z

i've been trying to get s3 working on my sony vaio, but i'm having some problems concerning the hard drive during resume. after a resume i see these messages in dmesg:

hda: lost interrupt

evevent-0299: *** Error: No installed handler for fixed event [00000002]

Restarting tasks... done

hda: dma_timer_expiry: dma status == 0x21

hda: DMA timeout error

hda: dma timeout error: status=0x50 { DriveReady SeekComplete }

ide: failed opcode was: unknown

hda: status error: status=0x50 { DriveReady SeekComplete }

ide: failed opcode was: unknown

hda: no DRQ after issuing MULTWRITE_EXT

hda: status error: status=0x50 { DriveReady SeekComplete }

ide: failed opcode was: unknown

hda: no DRQ after issuing MULTWRITE_EXT

hda: lost interrupt

hda: status error: status=0x50 { DriveReady SeekComplete }

ide: failed opcode was: unknown

hda: no DRQ after issuing MULTWRITE_EXT

hda: status error: status=0x50 { DriveReady SeekComplete }

ide: failed opcode was: unknown

hda: no DRQ after issuing MULTWRITE_EXT

ide0: reset: success

sometimes i also see this message right before all of this, i'm not sure if it's related:

acpi_bus_0200 [77] bus_set_power : Device is not power manageable

the drive eventually spins up and the resume is a success, but it takes like two minutes(too long) and i'm afraid it may be damaging my hard drive.

the drive is an ide ata drive with an ich4-m controller.

_______________________________________________
Join Excite! - http://www.excite.com
The most personalized portal on the Web!