Fw: Re: 2.6.15-rc5-mm1

[Andrew Morton <akpm-3NddpPZAyC0@public.gmane.org>]

[-- Attachment #1: Type: text/plain, Size: 11396 bytes --]


I assume this is due to recent updates in Len's tree.


Begin forwarded message:

Date: Mon, 5 Dec 2005 21:59:05 +0300
From: Roman I Khimov <rik-MdmE8JOsREphl2p70BpVqQ@public.gmane.org>
To: Andrew Morton <akpm-3NddpPZAyC0@public.gmane.org>
Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: 2.6.15-rc5-mm1


Hello.

5 ______________ 2005 10:21 | Andrew Morton:
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.15-rc5/2.6.15-rc5-mm1/

Something went wrong with ACPI, my fan is blowing constantly. This is an
old MiTAC notebook with mobile Athlon XP 1700+.

Here is the diff between dmesg on 2.6.15-rc3-mm1 and 2.6.15-rc5-mm1:

rik@pu-erh:~> diff -up dmesg-2.6.15-rc3-mm1 dmesg-2.6.15-rc5-mm1
--- dmesg-2.6.15-rc3-mm1        2005-12-05 21:49:10.291930507 +0300
+++ dmesg-2.6.15-rc5-mm1        2005-12-05 21:45:13.203193011 +0300
@@ -1,4 +1,4 @@
-Linux version 2.6.15-rc3-mm1-pu-erh-static (root@pu-erh) (gcc version 3.3.3 (SuSE Linux)) #1 PREEMPT Wed Nov 30 15:04:54 MSK 2005
+Linux version 2.6.15-rc5-mm1-pu-erh (root@pu-erh) (gcc version 3.3.3 (SuSE Linux)) #1 PREEMPT Mon Dec 5 18:01:01 MSK 2005
 BIOS-provided physical RAM map:
  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
@@ -9,10 +9,10 @@ BIOS-provided physical RAM map:
  BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
 735MB LOWMEM available.
 On node 0 totalpages: 188400
-  DMA zone: 4096 pages, LIFO batch:2
-  DMA32 zone: 0 pages, LIFO batch:2
-  Normal zone: 184304 pages, LIFO batch:64
-  HighMem zone: 0 pages, LIFO batch:2
+  DMA zone: 4096 pages, LIFO batch:0
+  DMA32 zone: 0 pages, LIFO batch:0
+  Normal zone: 184304 pages, LIFO batch:31
+  HighMem zone: 0 pages, LIFO batch:0
 DMI 2.3 present.
 ACPI: RSDP (v000 OID_00                                ) @ 0x000e5010
 ACPI: RSDT (v001 INSYDE RSDT_000 0x00000001 _CSI 0x00010100) @ 0x2dfffbc0
@@ -31,14 +31,14 @@ Initializing CPU#0
 Kernel command line: lapic root=/dev/hda3 video=savagefb:1024x768-32@60 splash=silent desktop resume=/dev/hda5 showopts init=/sbin/initng rw
 CPU 0 irqstacks, hard=c0498000 soft=c0497000
 PID hash table entries: 4096 (order: 12, 65536 bytes)
-Detected 1459.924 MHz processor.
+Detected 1459.922 MHz processor.
 Using tsc for high-res timesource
 Console: colour VGA+ 80x25
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 742096k/753600k available (2626k kernel code, 10964k reserved, 844k data, 180k init, 0k highmem)
+Memory: 742140k/753600k available (2627k kernel code, 10964k reserved, 843k data, 180k init, 0k highmem)
 Checking if this processor honours the WP bit even in supervisor mode... Ok.
-Calibrating delay using timer specific routine.. 2922.34 BogoMIPS (lpj=1461170)
+Calibrating delay using timer specific routine.. 2922.34 BogoMIPS (lpj=1461172)
 Mount-cache hash table entries: 512
 CPU: After generic identify, caps: 0383fbff c1cbfbff 00000000 00000000 00000000 00000000 00000000
 CPU: After vendor identify, caps: 0383fbff c1cbfbff 00000000 00000000 00000000 00000000 00000000
@@ -56,12 +56,10 @@ NET: Registered protocol family 16
 ACPI: bus type pci registered
 PCI: PCI BIOS revision 2.10 entry at 0xe8b24, last bus=1
 PCI: Using configuration type 1
-usbcore: registered new driver usbfs
-usbcore: registered new driver hub
 ACPI: Subsystem revision 20050916
-spurious 8259A interrupt: IRQ7.
 ACPI: Interpreter enabled
 ACPI: Using PIC for interrupt routing
+spurious 8259A interrupt: IRQ7.
 ACPI: PCI Root Bridge [PCI0] (0000:00)
 PCI: Probing PCI hardware (bus 00)
 ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
@@ -77,6 +75,8 @@ ACPI: PCI Interrupt Link [LNKD] (IRQs 5
 Linux Plug and Play Support v0.97 (c) Adam Belay
 pnp: PnP ACPI init
 pnp: PnP ACPI: found 11 devices
+usbcore: registered new driver usbfs
+usbcore: registered new driver hub
 PCI: Using ACPI for IRQ routing
 PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
 pnp: 00:07: ioport range 0x330-0x331 has been reserved
@@ -103,37 +103,12 @@ Total HugeTLB memory allocated, 0
 Initializing Cryptographic API
 io scheduler noop registered
 io scheduler cfq registered
-ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
-ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
-ehci_hcd 0000:00:10.3: EHCI Host Controller
-ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1
-ehci_hcd 0000:00:10.3: irq 11, io mem 0xf0000000
-ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
-usb usb1: configuration #1 chosen from 1 choice
-hub 1-0:1.0: USB hub found
-hub 1-0:1.0: 4 ports detected
-USB Universal Host Controller Interface driver v2.3
 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
 PCI: setting IRQ 10 as level-triggered
-ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
-uhci_hcd 0000:00:10.0: UHCI Host Controller
-uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
-uhci_hcd 0000:00:10.0: irq 10, io base 0x00001200
-usb usb2: configuration #1 chosen from 1 choice
-hub 2-0:1.0: USB hub found
-hub 2-0:1.0: 2 ports detected
-ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
-uhci_hcd 0000:00:10.1: UHCI Host Controller
-uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
-uhci_hcd 0000:00:10.1: irq 11, io base 0x00001300
-usb usb3: configuration #1 chosen from 1 choice
-hub 3-0:1.0: USB hub found
-hub 3-0:1.0: 2 ports detected
-usbcore: registered new driver libusual
 ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
 savagefb: mapped io at ee880000
 savagefb: probed videoram:  32768k
-savagefb: Detected current MCLK value of 25256 kHz
+savagefb: Detected current MCLK value of 14318 kHz
 savagefb: mapped framebuffer at ee980000, pbase == 90000000
 savagefb v0.4.0_2.6: 32640kB VRAM, using 1024x768, 48.364kHz, 60Hz
 Console: switching to colour frame buffer device 128x48
@@ -145,7 +120,6 @@ ACPI: Sleep Button (CM) [SBTN]
 ACPI: Lid Switch [LID]
 ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
 Using specific hotkey driver
-ACPI: CPU0 (power states: C1[C1] C2[C2])
 ACPI: Processor [CPU0] (supports 16 throttling states)
 Real Time Clock Driver v1.12
 Non-volatile memory driver v1.2
@@ -171,7 +145,7 @@ loop: loaded (max 8 devices)
 via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
 ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
 eth0: VIA Rhine II at 0xf0000100, 00:40:d0:2e:06:bc, IRQ 10.
-eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
+eth0: MII PHY found at address 1, status 0x7869 advertising 05e1 Link 45e1.
 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
 VP_IDE: IDE controller at PCI slot 0000:00:11.1
@@ -184,9 +158,9 @@ VP_IDE: VIA vt8235 (rev 00) IDE UDMA133
 Probing IDE interface ide0...
 hda: ST94811A, ATA DISK drive
 Synaptics Touchpad, model: 1, fw: 5.1, id: 0x8f40b1, caps: 0x80471b/0x0
-input: SynPS/2 Synaptics TouchPad as /class/input/input1
 ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
 Probing IDE interface ide1...
+input: SynPS/2 Synaptics TouchPad as /class/input/input1
 hdc: QSI CD-RW/DVD-ROM SBW-161, ATAPI CD/DVD-ROM drive
 ide1 at 0x170-0x177,0x376 on irq 15
 hda: max request size: 1024KiB
@@ -202,13 +176,39 @@ ACPI: PCI Interrupt 0000:00:0b.0[A] -> L
 ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[5]  MMIO=[fedff800-fedfffff]  Max Packet=[2048]
 ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
 Yenta: CardBus bridge found at 0000:00:09.0 [1071:8375]
-Yenta: ISA IRQ mask 0x0010, PCI irq 11
+Yenta: ISA IRQ mask 0x0040, PCI irq 11
 Socket status: 30000006
+ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
+ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
+ehci_hcd 0000:00:10.3: EHCI Host Controller
+ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1
+ehci_hcd 0000:00:10.3: irq 11, io mem 0xf0000000
+ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
+usb usb1: configuration #1 chosen from 1 choice
+hub 1-0:1.0: USB hub found
+hub 1-0:1.0: 4 ports detected
+USB Universal Host Controller Interface driver v2.3
+ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
+uhci_hcd 0000:00:10.0: UHCI Host Controller
+uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
+uhci_hcd 0000:00:10.0: irq 10, io base 0x00001200
+usb usb2: configuration #1 chosen from 1 choice
+hub 2-0:1.0: USB hub found
+hub 2-0:1.0: 2 ports detected
+ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
+uhci_hcd 0000:00:10.1: UHCI Host Controller
+uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
+uhci_hcd 0000:00:10.1: irq 11, io base 0x00001300
+usb usb3: configuration #1 chosen from 1 choice
+hub 3-0:1.0: USB hub found
+hub 3-0:1.0: 2 ports detected
+usbcore: registered new driver libusual
 i2c /dev entries driver
 device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org
 Advanced Linux Sound Architecture Driver Version 1.0.10rc3 (Mon Nov 07 13:30:21 2005 UTC).
 ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
 PCI: Setting latency timer of device 0000:00:11.5 to 64
+ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0040d001000a8f08]
 ACPI: PCI Interrupt 0000:00:11.6[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
 PCI: Setting latency timer of device 0000:00:11.6 to 64
 ALSA device list:
@@ -223,11 +223,10 @@ TCP reno registered
 TCP bic registered
 NET: Registered protocol family 1
 powernow: PowerNOW! Technology present. Can scale: frequency and voltage.
-Detected 1459.676 MHz processor.
+Detected 1460.133 MHz processor.
 powernow: SGTC: 13333
-powernow: Minimum speed 862 MHz. Maximum speed 1459 MHz.
+powernow: Minimum speed 862 MHz. Maximum speed 1460 MHz.
 Using IPI Shortcut mode
-ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0040d001000a8f08]
 ACPI wakeup devices:
 SBTN USB0 USB1 AC97 MC97 LAN0 FSD0
 ACPI: (supports S0 S3 S4 S5)
@@ -238,7 +237,7 @@ ReiserFS: hda3: checking transaction log
 ReiserFS: hda3: Using r5 hash to sort names
 VFS: Mounted root (reiserfs filesystem).
 Freeing unused kernel memory: 180k freed
-Write protecting the kernel read-only data: 402k
+Write protecting the kernel read-only data: 403k
 Loading Reiser4. See www.namesys.com for a description of Reiser4.
 Adding 979892k swap on /dev/hda5.  Priority:-1 extents:1 across:979892k
 NET: Registered protocol family 17


Also DMA info in the start of the log looks strange to me (but everything
works).

Any additional info on request, any patches are welcome.

-- 
                            Roman
 ,---------------------------. ,--------------------------.
/     http://www.3os.ru/      V    http://www.osrc.info/   \         .o.
\    mailto: rik-EZ1ikkraMFw@public.gmane.org       ^   mailto: rik-MdmE8JOsREphl2p70BpVqQ@public.gmane.org    /         ..o
 `---------------------------' `--------------------------'          ooo
gpg --recv-keys 0xE5E055C3 --keyserver hkp://subkeys.pgp.net


[-- Attachment #2: 00000000.mimetmp --]
[-- Type: application/pgp-signature, Size: 190 bytes --]