From mboxrd@z Thu Jan 1 00:00:00 1970 From: Andrew Morton Subject: Fw: Re: 2.6.15-rc5-mm1 Date: Tue, 6 Dec 2005 14:08:41 +1100 Message-ID: <20051206140841.2c3d7c52.akpm@osdl.org> Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="Multipart=_Tue__6_Dec_2005_14_08_41_+1100_Pf0FT8GpVi8kOSQZ" Return-path: Sender: acpi-devel-admin-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org Errors-To: acpi-devel-admin-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org List-Unsubscribe: , List-Post: List-Help: List-Subscribe: , List-Archive: To: acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org Cc: Roman I Khimov List-Id: linux-acpi@vger.kernel.org This is a multi-part message in MIME format. --Multipart=_Tue__6_Dec_2005_14_08_41_+1100_Pf0FT8GpVi8kOSQZ Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit I assume this is due to recent updates in Len's tree. Begin forwarded message: Date: Mon, 5 Dec 2005 21:59:05 +0300 From: Roman I Khimov To: Andrew Morton Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org Subject: Re: 2.6.15-rc5-mm1 Hello. 5 ______________ 2005 10:21 | Andrew Morton: > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.15-rc5/2.6.15-rc5-mm1/ Something went wrong with ACPI, my fan is blowing constantly. This is an old MiTAC notebook with mobile Athlon XP 1700+. Here is the diff between dmesg on 2.6.15-rc3-mm1 and 2.6.15-rc5-mm1: rik@pu-erh:~> diff -up dmesg-2.6.15-rc3-mm1 dmesg-2.6.15-rc5-mm1 --- dmesg-2.6.15-rc3-mm1 2005-12-05 21:49:10.291930507 +0300 +++ dmesg-2.6.15-rc5-mm1 2005-12-05 21:45:13.203193011 +0300 @@ -1,4 +1,4 @@ -Linux version 2.6.15-rc3-mm1-pu-erh-static (root@pu-erh) (gcc version 3.3.3 (SuSE Linux)) #1 PREEMPT Wed Nov 30 15:04:54 MSK 2005 +Linux version 2.6.15-rc5-mm1-pu-erh (root@pu-erh) (gcc version 3.3.3 (SuSE Linux)) #1 PREEMPT Mon Dec 5 18:01:01 MSK 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) @@ -9,10 +9,10 @@ BIOS-provided physical RAM map: BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 735MB LOWMEM available. On node 0 totalpages: 188400 - DMA zone: 4096 pages, LIFO batch:2 - DMA32 zone: 0 pages, LIFO batch:2 - Normal zone: 184304 pages, LIFO batch:64 - HighMem zone: 0 pages, LIFO batch:2 + DMA zone: 4096 pages, LIFO batch:0 + DMA32 zone: 0 pages, LIFO batch:0 + Normal zone: 184304 pages, LIFO batch:31 + HighMem zone: 0 pages, LIFO batch:0 DMI 2.3 present. ACPI: RSDP (v000 OID_00 ) @ 0x000e5010 ACPI: RSDT (v001 INSYDE RSDT_000 0x00000001 _CSI 0x00010100) @ 0x2dfffbc0 @@ -31,14 +31,14 @@ Initializing CPU#0 Kernel command line: lapic root=/dev/hda3 video=savagefb:1024x768-32@60 splash=silent desktop resume=/dev/hda5 showopts init=/sbin/initng rw CPU 0 irqstacks, hard=c0498000 soft=c0497000 PID hash table entries: 4096 (order: 12, 65536 bytes) -Detected 1459.924 MHz processor. +Detected 1459.922 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) -Memory: 742096k/753600k available (2626k kernel code, 10964k reserved, 844k data, 180k init, 0k highmem) +Memory: 742140k/753600k available (2627k kernel code, 10964k reserved, 843k data, 180k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. -Calibrating delay using timer specific routine.. 2922.34 BogoMIPS (lpj=1461170) +Calibrating delay using timer specific routine.. 2922.34 BogoMIPS (lpj=1461172) Mount-cache hash table entries: 512 CPU: After generic identify, caps: 0383fbff c1cbfbff 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 0383fbff c1cbfbff 00000000 00000000 00000000 00000000 00000000 @@ -56,12 +56,10 @@ NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xe8b24, last bus=1 PCI: Using configuration type 1 -usbcore: registered new driver usbfs -usbcore: registered new driver hub ACPI: Subsystem revision 20050916 -spurious 8259A interrupt: IRQ7. ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing +spurious 8259A interrupt: IRQ7. ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 @@ -77,6 +75,8 @@ ACPI: PCI Interrupt Link [LNKD] (IRQs 5 Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 11 devices +usbcore: registered new driver usbfs +usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report pnp: 00:07: ioport range 0x330-0x331 has been reserved @@ -103,37 +103,12 @@ Total HugeTLB memory allocated, 0 Initializing Cryptographic API io scheduler noop registered io scheduler cfq registered -ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 -ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 -ehci_hcd 0000:00:10.3: EHCI Host Controller -ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1 -ehci_hcd 0000:00:10.3: irq 11, io mem 0xf0000000 -ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 -usb usb1: configuration #1 chosen from 1 choice -hub 1-0:1.0: USB hub found -hub 1-0:1.0: 4 ports detected -USB Universal Host Controller Interface driver v2.3 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered -ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10 -uhci_hcd 0000:00:10.0: UHCI Host Controller -uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 -uhci_hcd 0000:00:10.0: irq 10, io base 0x00001200 -usb usb2: configuration #1 chosen from 1 choice -hub 2-0:1.0: USB hub found -hub 2-0:1.0: 2 ports detected -ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 -uhci_hcd 0000:00:10.1: UHCI Host Controller -uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 -uhci_hcd 0000:00:10.1: irq 11, io base 0x00001300 -usb usb3: configuration #1 chosen from 1 choice -hub 3-0:1.0: USB hub found -hub 3-0:1.0: 2 ports detected -usbcore: registered new driver libusual ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10 savagefb: mapped io at ee880000 savagefb: probed videoram: 32768k -savagefb: Detected current MCLK value of 25256 kHz +savagefb: Detected current MCLK value of 14318 kHz savagefb: mapped framebuffer at ee980000, pbase == 90000000 savagefb v0.4.0_2.6: 32640kB VRAM, using 1024x768, 48.364kHz, 60Hz Console: switching to colour frame buffer device 128x48 @@ -145,7 +120,6 @@ ACPI: Sleep Button (CM) [SBTN] ACPI: Lid Switch [LID] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) Using specific hotkey driver -ACPI: CPU0 (power states: C1[C1] C2[C2]) ACPI: Processor [CPU0] (supports 16 throttling states) Real Time Clock Driver v1.12 Non-volatile memory driver v1.2 @@ -171,7 +145,7 @@ loop: loaded (max 8 devices) via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10 eth0: VIA Rhine II at 0xf0000100, 00:40:d0:2e:06:bc, IRQ 10. -eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1. +eth0: MII PHY found at address 1, status 0x7869 advertising 05e1 Link 45e1. Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 0000:00:11.1 @@ -184,9 +158,9 @@ VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 Probing IDE interface ide0... hda: ST94811A, ATA DISK drive Synaptics Touchpad, model: 1, fw: 5.1, id: 0x8f40b1, caps: 0x80471b/0x0 -input: SynPS/2 Synaptics TouchPad as /class/input/input1 ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... +input: SynPS/2 Synaptics TouchPad as /class/input/input1 hdc: QSI CD-RW/DVD-ROM SBW-161, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 1024KiB @@ -202,13 +176,39 @@ ACPI: PCI Interrupt 0000:00:0b.0[A] -> L ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[5] MMIO=[fedff800-fedfffff] Max Packet=[2048] ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 Yenta: CardBus bridge found at 0000:00:09.0 [1071:8375] -Yenta: ISA IRQ mask 0x0010, PCI irq 11 +Yenta: ISA IRQ mask 0x0040, PCI irq 11 Socket status: 30000006 +ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 +ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 +ehci_hcd 0000:00:10.3: EHCI Host Controller +ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1 +ehci_hcd 0000:00:10.3: irq 11, io mem 0xf0000000 +ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 +usb usb1: configuration #1 chosen from 1 choice +hub 1-0:1.0: USB hub found +hub 1-0:1.0: 4 ports detected +USB Universal Host Controller Interface driver v2.3 +ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10 +uhci_hcd 0000:00:10.0: UHCI Host Controller +uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 +uhci_hcd 0000:00:10.0: irq 10, io base 0x00001200 +usb usb2: configuration #1 chosen from 1 choice +hub 2-0:1.0: USB hub found +hub 2-0:1.0: 2 ports detected +ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 +uhci_hcd 0000:00:10.1: UHCI Host Controller +uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 +uhci_hcd 0000:00:10.1: irq 11, io base 0x00001300 +usb usb3: configuration #1 chosen from 1 choice +hub 3-0:1.0: USB hub found +hub 3-0:1.0: 2 ports detected +usbcore: registered new driver libusual i2c /dev entries driver device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org Advanced Linux Sound Architecture Driver Version 1.0.10rc3 (Mon Nov 07 13:30:21 2005 UTC). ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5 PCI: Setting latency timer of device 0000:00:11.5 to 64 +ieee1394: Host added: ID:BUS[0-00:1023] GUID[0040d001000a8f08] ACPI: PCI Interrupt 0000:00:11.6[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5 PCI: Setting latency timer of device 0000:00:11.6 to 64 ALSA device list: @@ -223,11 +223,10 @@ TCP reno registered TCP bic registered NET: Registered protocol family 1 powernow: PowerNOW! Technology present. Can scale: frequency and voltage. -Detected 1459.676 MHz processor. +Detected 1460.133 MHz processor. powernow: SGTC: 13333 -powernow: Minimum speed 862 MHz. Maximum speed 1459 MHz. +powernow: Minimum speed 862 MHz. Maximum speed 1460 MHz. Using IPI Shortcut mode -ieee1394: Host added: ID:BUS[0-00:1023] GUID[0040d001000a8f08] ACPI wakeup devices: SBTN USB0 USB1 AC97 MC97 LAN0 FSD0 ACPI: (supports S0 S3 S4 S5) @@ -238,7 +237,7 @@ ReiserFS: hda3: checking transaction log ReiserFS: hda3: Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem). Freeing unused kernel memory: 180k freed -Write protecting the kernel read-only data: 402k +Write protecting the kernel read-only data: 403k Loading Reiser4. See www.namesys.com for a description of Reiser4. Adding 979892k swap on /dev/hda5. Priority:-1 extents:1 across:979892k NET: Registered protocol family 17 Also DMA info in the start of the log looks strange to me (but everything works). Any additional info on request, any patches are welcome. -- Roman ,---------------------------. ,--------------------------. / http://www.3os.ru/ V http://www.osrc.info/ \ .o. \ mailto: rik-EZ1ikkraMFw@public.gmane.org ^ mailto: rik-MdmE8JOsREphl2p70BpVqQ@public.gmane.org / ..o `---------------------------' `--------------------------' ooo gpg --recv-keys 0xE5E055C3 --keyserver hkp://subkeys.pgp.net --Multipart=_Tue__6_Dec_2005_14_08_41_+1100_Pf0FT8GpVi8kOSQZ Content-Type: application/pgp-signature; name="00000000.mimetmp" Content-Disposition: attachment; filename="00000000.mimetmp" Content-Transfer-Encoding: base64 LS0tLS1CRUdJTiBQR1AgU0lHTkFUVVJFLS0tLS0KVmVyc2lvbjogR251UEcgdjEuMi40IChHTlUv TGludXgpCgppRDhEQlFCRGxJMzlYSjcweitYZ1ZjTVJBb2pxQUtDYndtS0ZJNndaK2NGTjNGcHRj azEzaE90b3NnQ2VMQnVvClQrTGpndXR6bFo2akJVV0tzWlJac2tVPQo9bUNNbwotLS0tLUVORCBQ R1AgU0lHTkFUVVJFLS0tLS0KCg== --Multipart=_Tue__6_Dec_2005_14_08_41_+1100_Pf0FT8GpVi8kOSQZ-- ------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://ads.osdn.com/?ad_id=7637&alloc_id=16865&op=click