Re: Fwd: [patch 01/14] asus_acpi: W3000 support

[Karol Kozimor <sziwan@hell.org.pl>]

Thus wrote Len Brown:
> Karol,
> What shall we do with this?
> 
> If you want it applied, you can simply reply-all to akpm's e-mail and say "please apply".
> If you want me to put it in the batch for 2.6.19, i can do that too.


Hi,
Sorry for the delay, I've been traveling for 2 weeks and will be for 2
more. The patch *looks* OK, but I can't verify all the method nodes here.
Please put it in the test tree, but don't apply to mainline yet, I'll try
to verify this ASAP.

-- 
Karol 'sziwan' Kozimor
sziwan@hell.org.pl

--------------
From: Marek W <marekw1977@yahoo.com.au>

Add support for W3000 (W3V) and indirectly fixes an issue with kmilo under KDE
(it was triggering excessive LCD read error messages by querying asus_acpi
module) allowing people (I am probably the only one who tested this) with
W3000 to run kmilo.

Cc: Karol Kozimor <sziwan@hell.org.pl>
Signed-off-by: Andrew Morton <akpm@osdl.org>
---

 drivers/acpi/asus_acpi.c |   17 ++++++++++++++++-
 1 file changed, 16 insertions(+), 1 deletion(-)

diff -puN drivers/acpi/asus_acpi.c~asus_acpi-w3000-support drivers/acpi/asus_acpi.c
--- a/drivers/acpi/asus_acpi.c~asus_acpi-w3000-support
+++ a/drivers/acpi/asus_acpi.c
@@ -138,6 +138,7 @@ struct asus_hotk {
 		S2x,		//S200 (J1 reported), Victor MP-XP7210
 		W1N,		//W1000N
 		W5A,		//W5A
+		W3V,            //W3030V
 		xxN,		//M2400N, M3700N, M5200N, M6800N, S1300N, S5200N
 		//(Centrino)
 		END_MODEL
@@ -376,6 +377,17 @@ static struct model_data model_conf[END_
 	 .display_get = "\\ADVG"},
 
 	{
+	 .name = "W3V",
+	 .mt_mled = "MLED",
+	 .mt_wled = "WLED",
+	 .mt_lcd_switch = xxN_PREFIX "_Q10",
+	 .lcd_status = "\\BKLT",
+	 .brightness_set = "SPLV",
+	 .brightness_get = "GPLV",
+	 .display_set = "SDSP",
+	 .display_get = "\\INFB"},
+
+       {
 	 .name = "xxN",
 	 .mt_mled = "MLED",
 /* WLED present, but not controlled by ACPI */
@@ -1097,6 +1109,8 @@ static int asus_model_match(char *model)
 		return A4G;
 	else if (strncmp(model, "W1N", 3) == 0)
 		return W1N;
+	else if (strncmp(model, "W3V", 3) == 0)
+		return W3V;
 	else if (strncmp(model, "W5A", 3) == 0)
 		return W5A;
 	else
@@ -1200,9 +1214,10 @@ static int asus_hotk_get_info(void)
 		hotk->methods->mt_wled = NULL;
 	/* L5D's WLED is not controlled by ACPI */
 	else if (strncmp(string, "M2N", 3) == 0 ||
+		 strncmp(string, "W3V", 3) == 0 ||
 		 strncmp(string, "S1N", 3) == 0)
 		hotk->methods->mt_wled = "WLED";
-	/* M2N and S1N have a usable WLED */
+	/* M2N, S1N and W3V have a usable WLED */
 	else if (asus_info) {
 		if (strncmp(asus_info->oem_table_id, "L1", 2) == 0)
 			hotk->methods->mled_status = NULL;