From mboxrd@z Thu Jan 1 00:00:00 1970 From: Pavel Machek Subject: Re: Problem with resuming ATI SATA on HPC nx6325 Date: Tue, 5 Sep 2006 08:24:50 +0200 Message-ID: <20060905062438.GD1958@elf.ucw.cz> References: <200609041332.19780.rjw@sisk.pl> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Received: from gprs189-60.eurotel.cz ([160.218.189.60]:8673 "EHLO amd.ucw.cz") by vger.kernel.org with ESMTP id S965167AbWIEGZF (ORCPT ); Tue, 5 Sep 2006 02:25:05 -0400 Content-Disposition: inline In-Reply-To: <200609041332.19780.rjw@sisk.pl> Sender: linux-acpi-owner@vger.kernel.org List-Id: linux-acpi@vger.kernel.org To: "Rafael J. Wysocki" Cc: Linux ACPI , Alan Cox Hi! > I've just installed SUSE 10.1 on a HPC 6325 notebook (x86_64, dual_core) with > an ATI chipset. It generally works just fine (well, except for some minor > glitches), but I'm having problems with suspending it which seem to be ACPI > related. > > Namely, on the 2.6.18-rc5-mm1 kernel the hard drive is not accessible after > a resume of device drivers (eg. in the resume-during-suspend phase of swsusp). > On 2.6.18-rc5 swsusp works with the following drivers loaded: > > cpufreq_ondemand > powernow_k8 > freq_table > af_packet > ip6t_REJECT > xt_tcpudp > ipt_REJECT > xt_state > iptable_filter > ip_conntrack > nfnetlink > ip_tables > ip6table_filter > ip6_tables > x_tables > ipv6 > ext3 > jbd > fan > thermal > processor > sg > atiixp > sata_sil > libata > ide_disk > ide_core > > but if ohci_hcd and ehci_hcd are loaded additionally, the SATA thing doesn't > resume properly (if only one of ehci_hcd or ohci_hcd is loaded, it works). So situation is: 2.6.18-rc5: works in any config 2.6.18-rc5-mm1: if ohci+ehci+sata are loaded, SATA breaks during resume , right? How does it breaks? Are interrupts shared between the two? Pavel -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html