[PATCH 2/22] Remove trailing whitespace

[Corentin CHARY <corentincj@iksaif.net>]

Remove some trailing whitespace.

Signed-off-by: Corentin Chary <corentincj@iksaif.net>
---
 asus_acpi.c |   46 +++++++++++++++++++++++-----------------------
 1 file changed, 23 insertions(+), 23 deletions(-)

--- a/drivers/acpi/asus_acpi.c  2006-12-15 10:35:29.000000000 +0100
+++ b/drivers/acpi/asus_acpi.c  2006-12-15 10:30:52.000000000 +0100
@@ -83,7 +83,7 @@
 module_param(asus_gid, uint, 0);
 MODULE_PARM_DESC(asus_gid, "GID for entries in /proc/acpi/asus.\n");

-/* For each model, all features implemented,
+/* For each model, all features implemented,
  * those marked with R are relative to HOTK, A for absolute */
 struct model_data {
        char *name;             //name of the laptop________________A
@@ -128,7 +128,7 @@
                L3D,            //L3400D
                L3H,            //L3H, L2000E, L5D
                L4R,            //L4500R
-               L5x,            //L5800C
+               L5x,            //L5800C
                L8L,            //L8400L
                M1A,            //M1300A
                M2E,            //M2400E, L4400L
@@ -428,12 +428,12 @@
                },
 };

-/*
+/*
  * This function evaluates an ACPI method, given an int as parameter, the
  * method is searched within the scope of the handle, can be NULL. The output
  * of the method is written is output, which can also be NULL
  *
- * returns 1 if write is successful, 0 else.
+ * returns 1 if write is successful, 0 else.
  */
 static int write_acpi_int(acpi_handle handle, const char *method, int val,
                          struct acpi_buffer *output)
@@ -485,9 +485,9 @@
        len += sprintf(page, ACPI_HOTK_NAME " " ASUS_ACPI_VERSION "\n");
        len += sprintf(page + len, "Model reference    : %s\n",
                       hotk->methods->name);
-       /*
-        * The SFUN method probably allows the original driver to get the list
-        * of features supported by a given model. For now, 0x0100 or 0x0800
+       /*
+        * The SFUN method probably allows the original driver to get the list
+        * of features supported by a given model. For now, 0x0100 or 0x0800
         * bit signifies that the laptop is equipped with a Wi-Fi MiniPCI 
card.
         * The significance of others is yet to be found.
         */
@@ -497,7 +497,7 @@
        /*
         * Another value for userspace: the ASYM method returns 0x02 for
         * battery low and 0x04 for battery critical, its readings tend to be
-        * more accurate than those provided by _BST.
+        * more accurate than those provided by _BST.
         * Note: since not all the laptops provide this method, errors are
         * silently ignored.
         */
@@ -666,7 +666,7 @@
 proc_write_bluetooth(struct file *file, const char __user * buffer,
                     unsigned long count, void *data)
 {
-       /* Note: mt_bt_switch controls both internal Bluetooth adapter's
+       /* Note: mt_bt_switch controls both internal Bluetooth adapter's
           presence and its LED */
        return write_led(buffer, count, hotk->methods->mt_bt_switch, BT_ON, 
0);
 }
@@ -710,7 +710,7 @@

                input.count = 2;
                input.pointer = mt_params;
-               /* Note: the following values are partly guessed up, but
+               /* Note: the following values are partly guessed up, but
                   otherwise they seem to work */
                mt_params[0].type = ACPI_TYPE_INTEGER;
                mt_params[0].integer.value = 0x02;
@@ -751,7 +751,7 @@
                            (hotk->handle, hotk->methods->mt_lcd_switch, 0x07,
                             NULL))
                                status = AE_ERROR;
-                       /* L3H's AML executes EHK (0x07) upon Fn+F7 keypress,
+                       /* L3H's AML executes EHK (0x07) upon Fn+F7 keypress,
                           the exact behaviour is simulated here */
                }
                if (ACPI_FAILURE(status))
@@ -862,7 +862,7 @@
 }

 /*
- * Now, *this* one could be more user-friendly, but so far, no-one has
+ * Now, *this* one could be more user-friendly, but so far, no-one has
  * complained. The significance of bits is the same as in proc_write_disp()
  */
 static int
@@ -879,9 +879,9 @@
 }

 /*
- * Experimental support for display switching. As of now: 1 should activate
- * the LCD output, 2 should do for CRT, and 4 for TV-Out. Any combination
- * (bitwise) of these will suffice. I never actually tested 3 displays hooked 
up
+ * Experimental support for display switching. As of now: 1 should activate
+ * the LCD output, 2 should do for CRT, and 4 for TV-Out. Any combination
+ * (bitwise) of these will suffice. I never actually tested 3 displays hooked 
up
  * simultaneously, so be warned. See the acpi4asus README for more info.
  */
 static int
@@ -981,9 +981,9 @@
                              &proc_read_bluetooth, mode, device);
        }

-       /*
-        * We need both read node and write method as LCD switch is also 
accessible
-        * from keyboard
+       /*
+        * We need both read node and write method as LCD switch is also
+        * accessible from keyboard
         */
        if (hotk->methods->mt_lcd_switch && hotk->methods->lcd_status) {
                asus_proc_add(PROC_LCD, &proc_write_lcd, &proc_read_lcd, mode,
@@ -1124,8 +1124,8 @@
        acpi_status status;

        /*
-        * Get DSDT headers early enough to allow for differentiating between
-        * models, but late enough to allow acpi_bus_register_driver() to fail
+        * Get DSDT headers early enough to allow for differentiating between
+        * models, but late enough to allow acpi_bus_register_driver() to fail
         * before doing anything ACPI-specific. Should we encounter a machine,
         * which needs special handling (i.e. its hotkey device has a 
different
         * HID), this bit will be moved. A global variable asus_info contains
@@ -1152,8 +1152,8 @@

        /*
         * Try to match the object returned by INIT to the specific model.
-        * Handle every possible object (or the lack of thereof) the DSDT
-        * writers might throw at us. When in trouble, we pass NULL to
+        * Handle every possible object (or the lack of thereof) the DSDT
+        * writers might throw at us. When in trouble, we pass NULL to
         * asus_model_match() and try something completely different.
         */
        if (buffer.pointer) {
@@ -1193,7 +1193,7 @@
        /* Sort of per-model blacklist */
        if (strncmp(string, "L2B", 3) == 0)
                hotk->methods->lcd_status = NULL;
-       /* L2B is similar enough to L3C to use its settings, with this only
+       /* L2B is similar enough to L3C to use its settings, with this only
           exception */
        else if (strncmp(string, "A3G", 3) == 0)
                hotk->methods->lcd_status = "\\BLFG";

-- 
CHARY 'Iksaif' Corentin
http://xf.iksaif.net