From: Jean Delvare <khali@linux-fr.org>
To: Chuck Ebbert <cebbert@redhat.com>
Cc: Rudolf Marek <r.marek@assembler.cz>,
linux-acpi@vger.kernel.org,
linux-kernel <linux-kernel@vger.kernel.org>,
lm-sensors@lm-sensors.org
Subject: Re: [lm-sensors] Could the k8temp driver be interfering with ACPI?
Date: Sun, 18 Feb 2007 18:38:05 +0100 [thread overview]
Message-ID: <20070218183805.5a4fd813.khali@linux-fr.org> (raw)
In-Reply-To: <45D7461A.2040808@redhat.com>
On Sat, 17 Feb 2007 13:14:50 -0500, Chuck Ebbert wrote:
> Well I had an idea after looking at k8temp -- why not make it default to
> doing only reads from the sensor? You'd only get information from whatever
> core/sensor combination that ACPI had last used, but it would be safe.
ACPI is broken here, not k8temp, so let's fix ACPI instead. ACPI
doesn't conflict with only k8temp, but with virtually all hardware
monitoring drivers, all I2C/SMBus drivers, and probably other types of
drivers too. We just can't restrict or blacklist all these drivers
because ACPI misbehaves.
--
Jean Delvare
next prev parent reply other threads:[~2007-02-18 17:37 UTC|newest]
Thread overview: 102+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-02-16 17:31 Could the k8temp driver be interfering with ACPI? Chuck Ebbert
2007-02-16 17:57 ` Len Brown
2007-02-16 18:14 ` Chuck Ebbert
2007-02-16 19:59 ` Andi Kleen
2007-02-16 19:31 ` Chuck Ebbert
2007-02-18 17:32 ` [lm-sensors] " Jean Delvare
2007-02-18 23:22 ` Andi Kleen
2007-02-17 10:49 ` Rudolf Marek
2007-02-17 18:14 ` [lm-sensors] " Chuck Ebbert
2007-02-18 17:38 ` Jean Delvare [this message]
2007-02-20 15:18 ` Matthew Garrett
2007-02-20 15:33 ` Luca Tettamanti
2007-02-21 14:59 ` Jean Delvare
2007-02-21 15:07 ` Jean Delvare
2007-02-28 21:38 ` Pavel Machek
2007-03-01 14:26 ` Jean Delvare
2007-03-01 17:48 ` [lm-sensors] " Dave Jones
2007-03-02 11:27 ` Jean Delvare
2007-03-02 11:31 ` Pavel Machek
2007-03-02 13:37 ` Jean Delvare
2007-03-02 13:47 ` Henrique de Moraes Holschuh
2007-03-02 13:57 ` Pavel Machek
2007-03-03 6:44 ` Jean Delvare
2007-03-02 11:40 ` Pavel Machek
2007-03-02 11:47 ` Matthew Garrett
2007-03-02 13:58 ` Pavel Machek
2007-03-02 21:00 ` Jean Delvare
2007-03-02 21:22 ` Henrique de Moraes Holschuh
2007-04-01 15:39 ` Pavel Machek
2007-04-02 15:48 ` Jean Delvare
2007-04-02 19:22 ` Dave Jones
2007-04-03 5:49 ` Jean Delvare
2007-04-02 20:55 ` Moore, Robert
2007-04-03 7:21 ` Jean Delvare
2007-04-04 21:35 ` Moore, Robert
2007-03-02 14:10 ` [lm-sensors] " Jean Delvare
2007-03-02 14:18 ` Matthew Garrett
2007-03-02 21:04 ` Jean Delvare
2007-03-02 21:12 ` Matthew Garrett
2007-03-03 9:53 ` Jean Delvare
2007-03-03 15:47 ` David Hubbard
2007-03-03 15:50 ` Matthew Garrett
2007-03-03 17:08 ` Rudolf Marek
2007-03-04 17:29 ` Rudolf Marek
2007-03-05 21:16 ` Jean Delvare
2007-03-05 21:35 ` David Hubbard
2007-03-06 15:10 ` Jean Delvare
2007-03-04 10:54 ` Jean Delvare
2007-03-05 22:25 ` Pavel Machek
2007-03-06 7:55 ` Benny Amorsen
2007-03-06 15:26 ` Jean Delvare
2007-03-06 20:07 ` Stefan Monnier
2007-03-06 21:20 ` Pavel Machek
2007-03-06 21:25 ` Moore, Robert
2007-03-18 19:36 ` richardvoigt
2007-03-19 7:08 ` Jean Delvare
2007-03-02 22:07 ` Moore, Robert
2007-03-09 7:18 ` Pavel Machek
2007-03-09 10:24 ` Jean Delvare
2007-03-09 10:39 ` Alexey Starikovskiy
2007-03-09 11:21 ` Pavel Machek
2007-03-09 17:23 ` Jean Delvare
2007-03-09 17:35 ` Alexey Starikovskiy
2007-03-09 21:03 ` Moore, Robert
2007-03-09 20:56 ` Moore, Robert
2007-03-02 14:22 ` Pavel Machek
2007-03-02 14:03 ` Jean Delvare
2007-03-02 14:24 ` Pavel Machek
2007-03-02 14:57 ` Matthew Garrett
2007-03-02 21:41 ` Jean Delvare
2007-03-02 21:46 ` Matthew Garrett
2007-03-06 21:28 ` Jean Delvare
2007-04-13 18:18 ` Bjorn Helgaas
2007-04-13 20:07 ` Pavel Machek
2007-04-13 20:59 ` Bjorn Helgaas
2007-04-15 9:41 ` Jean Delvare
2007-04-15 20:31 ` Bjorn Helgaas
2007-04-15 20:59 ` Luca Tettamanti
2007-04-16 0:57 ` Bjorn Helgaas
2007-04-16 21:14 ` Luca Tettamanti
2007-04-16 22:28 ` Bjorn Helgaas
2007-04-17 23:50 ` Luca Tettamanti
2007-04-22 16:55 ` Luca Tettamanti
2007-04-17 10:03 ` Jean Delvare
2007-02-18 22:43 ` Rudolf Marek
2007-02-20 15:08 ` Chuck Ebbert
2007-02-20 19:11 ` Dave Jones
2007-02-21 16:17 ` Jean Delvare
2007-02-21 17:37 ` Dave Jones
2007-02-21 20:19 ` Dave Jones
2007-02-22 16:37 ` Jean Delvare
2007-02-23 7:13 ` Hans de Goede
2007-02-23 7:47 ` [lm-sensors] " Jean Delvare
2007-02-21 14:54 ` Jean Delvare
2007-02-21 16:03 ` Chuck Ebbert
2007-02-21 16:22 ` Jean Delvare
[not found] <7PvLN-1cj-3@gated-at.bofh.it>
[not found] ` <7TEGV-6Jy-39@gated-at.bofh.it>
[not found] ` <7TUBX-6TN-5@gated-at.bofh.it>
[not found] ` <7UeqX-4QO-17@gated-at.bofh.it>
[not found] ` <7UeqZ-4QO-27@gated-at.bofh.it>
[not found] ` <7UgM5-np-1@gated-at.bofh.it>
[not found] ` <7UgM8-np-11@gated-at.bofh.it>
[not found] ` <7UnaS-2xP-9@gated-at.bofh.it>
[not found] ` <7UnkC-2JB-9@gated-at.bofh.it>
[not found] ` <7Uzcd-49u-3@gated-at.bofh.it>
[not found] ` <7UEEN-4xi-3@gated-at.bofh.it>
2007-03-05 13:56 ` Bodo Eggert
2007-03-06 15:19 ` Jean Delvare
2007-03-06 20:40 ` Bodo Eggert
2007-03-07 9:17 ` Jean Delvare
2007-03-07 9:36 ` Pavel Machek
2007-03-07 17:09 ` Bodo Eggert
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070218183805.5a4fd813.khali@linux-fr.org \
--to=khali@linux-fr.org \
--cc=cebbert@redhat.com \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lm-sensors@lm-sensors.org \
--cc=r.marek@assembler.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox