* Re: Gigabyte GA-M57SLI-S4 (the linuxbios compatible version) problems
[not found] <200703121210.15812.st@iss.tu-darmstadt.de>
@ 2007-03-15 19:05 ` Andrew Morton
2007-03-16 21:54 ` ST
0 siblings, 1 reply; 2+ messages in thread
From: Andrew Morton @ 2007-03-15 19:05 UTC (permalink / raw)
To: ST; +Cc: linux-acpi
> On Mon, 12 Mar 2007 12:10:15 +0100 ST <st@iss.tu-darmstadt.de> wrote:
> Hi
>
> I am trying to boot 2.6.20.2 on a Gigabyte GA-M57SLI-S4 with f7 stock bios.
> I get the message:
> ENABLING IO-APIC IRQs
> ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
> ..MP-BIOS bug: 8254 timer not connected to IO-APIC
> ...trying to set up timer (IRQ0) through the 8259A ... failed.
> ...trying to set up timer as Virtual Wire IRQ... failed.
> ...trying to set up timer as ExtINT IRQ... failed :(.
> Kernel panic - not syncing: IO-APIC + timer doesn't work!
>
> I can boot with noapic option but then i only have one processor (AMD X2 3800+
> stepping 02).
>
> apic=debug doesn't give any more output than this.
>
> A bios update didn't help to the f7 version didn't help. This error is also
> present with the debian stock kernel.
>
> I thought that this MB should be pretty good supported, given the fact that
> there is an linuxbios in the works for this MB or am i bitten by a HW
> failure?
>
Apparently pci=noacpi fixes this.
ST (what sort of a name is that?): please raise a report against ACPI
at bugzilla.kernel.org, thanks.
^ permalink raw reply [flat|nested] 2+ messages in thread* Re: Gigabyte GA-M57SLI-S4 (the linuxbios compatible version) problems
2007-03-15 19:05 ` Gigabyte GA-M57SLI-S4 (the linuxbios compatible version) problems Andrew Morton
@ 2007-03-16 21:54 ` ST
0 siblings, 0 replies; 2+ messages in thread
From: ST @ 2007-03-16 21:54 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-acpi
Hi
> > I am trying to boot 2.6.20.2 on a Gigabyte GA-M57SLI-S4 with f7 stock
> > bios. I get the message:
> > ENABLING IO-APIC IRQs
> > ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
> > ..MP-BIOS bug: 8254 timer not connected to IO-APIC
> > ...trying to set up timer (IRQ0) through the 8259A ... failed.
> > ...trying to set up timer as Virtual Wire IRQ... failed.
> > ...trying to set up timer as ExtINT IRQ... failed :(.
> > Kernel panic - not syncing: IO-APIC + timer doesn't work!
> >
> > I can boot with noapic option but then i only have one processor (AMD X2
> > 3800+ stepping 02).
> >
> > apic=debug doesn't give any more output than this.
> >
> > A bios update didn't help to the f7 version didn't help. This error is
> > also present with the debian stock kernel.
> >
> > I thought that this MB should be pretty good supported, given the fact
> > that there is an linuxbios in the works for this MB or am i bitten by a
> > HW failure?
>
> Apparently pci=noacpi fixes this.
Affirmative, aparentlly it doesn't work without this parameter.
> ST (what sort of a name is that?): please raise a report against ACPI
It's an short pseudonym to keep an low search engine profile.
> at bugzilla.kernel.org, thanks.
It's reported as bug 8219. I can't debug with serial console (since i have
only one machine at this place) but i'm happy to test patches and stuff. Just
tell me :-).
Regards
ST
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2007-03-16 22:02 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <200703121210.15812.st@iss.tu-darmstadt.de>
2007-03-15 19:05 ` Gigabyte GA-M57SLI-S4 (the linuxbios compatible version) problems Andrew Morton
2007-03-16 21:54 ` ST
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox