From mboxrd@z Thu Jan 1 00:00:00 1970 From: Len Brown Subject: Re: acpi/sensors temperature on nx6325 Date: Sun, 17 Jun 2007 23:23:50 -0400 Message-ID: <200706172323.50305.lenb@kernel.org> References: <200706111310.25351.dev.list@mircea.bardac.net> Mime-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Return-path: Received: from hera.kernel.org ([140.211.167.34]:34703 "EHLO hera.kernel.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751977AbXFRDYz (ORCPT ); Sun, 17 Jun 2007 23:24:55 -0400 In-Reply-To: <200706111310.25351.dev.list@mircea.bardac.net> Content-Disposition: inline Sender: linux-acpi-owner@vger.kernel.org List-Id: linux-acpi@vger.kernel.org To: Mircea Bardac Cc: linux-acpi@vger.kernel.org > I got the same effect: I can't see the temperature change dynamically, degree > by degree. Also, in a test, the sensor went up to 60-65C and the trip-point > did't activate. This was with polling set to 1. > > If you need any more information, let me know. Try 2.6.22-rc5 with polling set to 0 and let me know if that doesn't work. thanks, -Len