[PATCH 0/3] Series short description

[PATCH 0/3] Series short description

[Alexey Starikovskiy]

In order to get notifications from Smart Batteries there is a need to
allow non-AML query handlers in EC driver.
AML query handlers are now found at init time, so there is no need to
look them up in namespace at query time.

-- 
Regards,
Alex.

[PATCH 1/3] ACPI EC: Re-factor EC space handler to avoid using label/goto for cycle.

[Alexey Starikovskiy]

Signed-off-by: Alexey Starikovskiy <aystarik@gmail.com>
---

 drivers/acpi/ec.c |   56 ++++++++++++++++-------------------------------------
 1 files changed, 17 insertions(+), 39 deletions(-)

diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index 82f496c..5534b23 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -454,57 +454,35 @@ acpi_ec_space_setup(acpi_handle region_handle,
 }
 
 static acpi_status
-acpi_ec_space_handler(u32 function,
-		      acpi_physical_address address,
-		      u32 bit_width,
-		      acpi_integer * value,
+acpi_ec_space_handler(u32 function, acpi_physical_address address,
+		      u32 bits, acpi_integer *value,
 		      void *handler_context, void *region_context)
 {
-	int result = 0;
 	struct acpi_ec *ec = handler_context;
-	u64 temp = *value;
-	acpi_integer f_v = 0;
-	int i = 0;
+	int result = 0, i = 0;
+	u8 temp = 0;
 
 	if ((address > 0xFF) || !value || !handler_context)
 		return AE_BAD_PARAMETER;
 
-	if (bit_width != 8 && acpi_strict) {
+	if (function != ACPI_READ && function != ACPI_WRITE)
 		return AE_BAD_PARAMETER;
-	}
-
-      next_byte:
-	switch (function) {
-	case ACPI_READ:
-		temp = 0;
-		result = acpi_ec_read(ec, (u8) address, (u8 *) & temp);
-		break;
-	case ACPI_WRITE:
-		result = acpi_ec_write(ec, (u8) address, (u8) temp);
-		break;
-	default:
-		result = -EINVAL;
-		goto out;
-		break;
-	}
 
-	bit_width -= 8;
-	if (bit_width) {
-		if (function == ACPI_READ)
-			f_v |= temp << 8 * i;
-		if (function == ACPI_WRITE)
-			temp >>= 8;
-		i++;
-		address++;
-		goto next_byte;
-	}
+	if (bits != 8 && acpi_strict)
+		return AE_BAD_PARAMETER;
 
-	if (function == ACPI_READ) {
-		f_v |= temp << 8 * i;
-		*value = f_v;
+	while (bits - i > 0) {
+		if (function == ACPI_READ) {
+			result = acpi_ec_read(ec, address, &temp);
+			(*value) |= ((acpi_integer)temp) << i;
+		} else {
+			temp = 0xff & ((*value) >> i);
+			result = acpi_ec_write(ec, address, temp);
+		}
+		i += 8;
+		++address;
 	}
 
-      out:
 	switch (result) {
 	case -EINVAL:
 		return AE_BAD_PARAMETER;

[PATCH 2/3] ACPI EC: drop usage of ACPI_DEBUG_PRINT as too heavy weight

[Alexey Starikovskiy]

Signed-off-by: Alexey Starikovskiy <aystarik@gmail.com>
---

 drivers/acpi/ec.c |   20 ++++++--------------
 1 files changed, 6 insertions(+), 14 deletions(-)

diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index 5534b23..ffb8361 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -39,20 +39,19 @@
 #include <acpi/acpi_drivers.h>
 #include <acpi/actypes.h>
 
-#define _COMPONENT		ACPI_EC_COMPONENT
-ACPI_MODULE_NAME("ec");
-#define ACPI_EC_COMPONENT		0x00100000
 #define ACPI_EC_CLASS			"embedded_controller"
 #define ACPI_EC_HID			"PNP0C09"
 #define ACPI_EC_DEVICE_NAME		"Embedded Controller"
 #define ACPI_EC_FILE_INFO		"info"
 #undef PREFIX
 #define PREFIX				"ACPI: EC: "
+
 /* EC status register */
 #define ACPI_EC_FLAG_OBF	0x01	/* Output buffer full */
 #define ACPI_EC_FLAG_IBF	0x02	/* Input buffer full */
 #define ACPI_EC_FLAG_BURST	0x10	/* burst mode */
 #define ACPI_EC_FLAG_SCI	0x20	/* EC-SCI occurred */
+
 /* EC commands */
 enum ec_command {
 	ACPI_EC_COMMAND_READ = 0x80,
@@ -245,7 +244,7 @@ static int acpi_ec_transaction(struct acpi_ec *ec, u8 command,
 
 	status = acpi_ec_wait(ec, ACPI_EC_EVENT_IBF_0, 0, 0);
 	if (status) {
-		printk(KERN_DEBUG PREFIX
+		printk(KERN_ERR PREFIX
 		       "input buffer is not empty, aborting transaction\n");
 		goto end;
 	}
@@ -630,10 +629,6 @@ static int acpi_ec_add(struct acpi_device *device)
 
 	acpi_ec_add_fs(device);
 
-	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "%s [%s] (gpe %d) interrupt mode.",
-			  acpi_device_name(device), acpi_device_bid(device),
-			  (u32) ec->gpe));
-
 	return 0;
 }
 
@@ -718,9 +713,6 @@ static int acpi_ec_start(struct acpi_device *device)
 	if (!ec)
 		return -EINVAL;
 
-	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "gpe=0x%02lx, ports=0x%2lx,0x%2lx",
-			  ec->gpe, ec->command_addr, ec->data_addr));
-
 	/* Boot EC is already working */
 	if (ec == boot_ec)
 		return 0;
@@ -779,8 +771,8 @@ ec_parse_device(acpi_handle handle, u32 Level, void *context, void **retval)
 
 	ec->handle = handle;
 
-	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "GPE=0x%02lx, ports=0x%2lx, 0x%2lx",
-			  ec->gpe, ec->command_addr, ec->data_addr));
+	printk(KERN_INFO PREFIX "GPE = 0x%lx, I/O: command/status = 0x%lx, data = 0x%lx",
+			  ec->gpe, ec->command_addr, ec->data_addr);
 
 	return AE_CTRL_TERMINATE;
 }
@@ -803,7 +795,7 @@ int __init acpi_ec_ecdt_probe(void)
 	if (ACPI_FAILURE(status))
 		goto error;
 
-	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found ECDT"));
+	printk(KERN_INFO PREFIX "EC description table is found, configuring boot EC\n");
 
 	boot_ec->command_addr = ecdt_ptr->control.address;
 	boot_ec->data_addr = ecdt_ptr->data.address;

[PATCH 3/3] ACPI EC: Add support for non-AML EC query handlers

[Alexey Starikovskiy]

Signed-off-by: Alexey Starikovskiy <aystarik@gmail.com>
---

 drivers/acpi/ec.c |  175 ++++++++++++++++++++++++++++++++++++++---------------
 1 files changed, 125 insertions(+), 50 deletions(-)

diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index ffb8361..10e8510 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -34,6 +34,7 @@
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
 #include <linux/interrupt.h>
+#include <linux/list.h>
 #include <asm/io.h>
 #include <acpi/acpi_bus.h>
 #include <acpi/acpi_drivers.h>
@@ -43,6 +44,7 @@
 #define ACPI_EC_HID			"PNP0C09"
 #define ACPI_EC_DEVICE_NAME		"Embedded Controller"
 #define ACPI_EC_FILE_INFO		"info"
+
 #undef PREFIX
 #define PREFIX				"ACPI: EC: "
 
@@ -60,6 +62,7 @@ enum ec_command {
 	ACPI_EC_BURST_DISABLE = 0x83,
 	ACPI_EC_COMMAND_QUERY = 0x84,
 };
+
 /* EC events */
 enum ec_event {
 	ACPI_EC_EVENT_OBF_1 = 1,	/* Output buffer full */
@@ -93,6 +96,16 @@ static struct acpi_driver acpi_ec_driver = {
 
 /* If we find an EC via the ECDT, we need to keep a ptr to its context */
 /* External interfaces use first EC only, so remember */
+typedef int (*acpi_ec_query_func) (void *data);
+
+struct acpi_ec_query_handler {
+	struct list_head node;
+	acpi_ec_query_func func;
+	acpi_handle handle;
+	void *data;
+	u8 query_bit;
+};
+
 static struct acpi_ec {
 	acpi_handle handle;
 	unsigned long gpe;
@@ -103,6 +116,7 @@ static struct acpi_ec {
 	atomic_t query_pending;
 	atomic_t event_count;
 	wait_queue_head_t wait;
+	struct list_head list;
 } *boot_ec, *first_ec;
 
 /* --------------------------------------------------------------------------
@@ -393,21 +407,67 @@ static int acpi_ec_query(struct acpi_ec *ec, u8 * data)
 /* --------------------------------------------------------------------------
                                 Event Management
    -------------------------------------------------------------------------- */
+int acpi_ec_add_query_handler(struct acpi_ec *ec, u8 query_bit,
+			      acpi_handle handle, acpi_ec_query_func func,
+			      void *data)
+{
+	struct acpi_ec_query_handler *handler =
+	    kzalloc(sizeof(struct acpi_ec_query_handler), GFP_KERNEL);
+	if (!handler)
+		return -ENOMEM;
+
+	handler->query_bit = query_bit;
+	handler->handle = handle;
+	handler->func = func;
+	handler->data = data;
+	mutex_lock(&ec->lock);
+	list_add_tail(&handler->node, &ec->list);
+	mutex_unlock(&ec->lock);
+	return 0;
+}
+
+EXPORT_SYMBOL_GPL(acpi_ec_add_query_handler);
+
+void acpi_ec_remove_query_handler(struct acpi_ec *ec, u8 query_bit)
+{
+	struct acpi_ec_query_handler *handler;
+	mutex_lock(&ec->lock);
+	list_for_each_entry(handler, &ec->list, node) {
+		if (query_bit == handler->query_bit) {
+			list_del(&handler->node);
+			kfree(handler);
+			break;
+		}
+	}
+	mutex_unlock(&ec->lock);
+}
+
+EXPORT_SYMBOL_GPL(acpi_ec_remove_query_handler);
 
 static void acpi_ec_gpe_query(void *ec_cxt)
 {
 	struct acpi_ec *ec = ec_cxt;
 	u8 value = 0;
-	char object_name[8];
+	struct acpi_ec_query_handler *handler, copy;
 
 	if (!ec || acpi_ec_query(ec, &value))
 		return;
-
-	snprintf(object_name, 8, "_Q%2.2X", value);
-
-	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Evaluating %s", object_name));
-
-	acpi_evaluate_object(ec->handle, object_name, NULL, NULL);
+	mutex_lock(&ec->lock);
+	list_for_each_entry(handler, &ec->list, node) {
+		if (value == handler->query_bit) {
+			/* have custom handler for this bit */
+			memcpy(&copy, handler, sizeof(copy));
+			mutex_unlock(&ec->lock);
+			if (copy.func) {
+				copy.func(copy.data);
+			} else if (copy.handle) {
+				acpi_evaluate_object(copy.handle, NULL, NULL, NULL);
+			}
+			return;
+		}
+	}
+	mutex_unlock(&ec->lock);
+	printk(KERN_ERR PREFIX "Handler for query 0x%x is not found!\n", value);
 }
 
 static u32 acpi_ec_gpe_handler(void *data)
@@ -426,8 +486,7 @@ static u32 acpi_ec_gpe_handler(void *data)
 	if ((value & ACPI_EC_FLAG_SCI) && !atomic_read(&ec->query_pending)) {
 		atomic_set(&ec->query_pending, 1);
 		status =
-		    acpi_os_execute(OSL_EC_BURST_HANDLER, acpi_ec_gpe_query,
-				    ec);
+		    acpi_os_execute(OSL_EC_BURST_HANDLER, acpi_ec_gpe_query, ec);
 	}
 
 	return status == AE_OK ?
@@ -574,9 +633,6 @@ static int acpi_ec_remove_fs(struct acpi_device *device)
 static acpi_status
 ec_parse_io_ports(struct acpi_resource *resource, void *context);
 
-static acpi_status
-ec_parse_device(acpi_handle handle, u32 Level, void *context, void **retval);
-
 static struct acpi_ec *make_acpi_ec(void)
 {
 	struct acpi_ec *ec = kzalloc(sizeof(struct acpi_ec), GFP_KERNEL);
@@ -587,13 +643,52 @@ static struct acpi_ec *make_acpi_ec(void)
 	atomic_set(&ec->event_count, 1);
 	mutex_init(&ec->lock);
 	init_waitqueue_head(&ec->wait);
+	INIT_LIST_HEAD(&ec->list);
 
 	return ec;
 }
 
+static acpi_status
+acpi_ec_register_query_methods(acpi_handle handle, u32 level,
+			       void *context, void **return_value)
+{
+	struct acpi_namespace_node *node = handle;
+	struct acpi_ec *ec = context;
+	int value = 0;
+	if (sscanf(node->name.ascii, "_Q%x", &value) == 1) {
+		acpi_ec_add_query_handler(ec, value, handle, NULL, NULL);
+	}
+	return AE_OK;
+}
+
+static int ec_parse_device(struct acpi_ec *ec, acpi_handle handle)
+{
+	if (ACPI_FAILURE(acpi_walk_resources(handle, METHOD_NAME__CRS,
+				     ec_parse_io_ports, ec)))
+		return -EINVAL;
+
+	/* Get GPE bit assignment (EC events). */
+	/* TODO: Add support for _GPE returning a package */
+	if (ACPI_FAILURE(acpi_evaluate_integer(handle, "_GPE", NULL, &ec->gpe)))
+		return -EINVAL;
+
+	/* Use the global lock for all EC transactions? */
+	acpi_evaluate_integer(handle, "_GLK", NULL, &ec->global_lock);
+
+	/* Find and register all query methods */
+	acpi_walk_namespace(ACPI_TYPE_METHOD, handle, 1,
+			    acpi_ec_register_query_methods, ec, NULL);
+
+	ec->handle = handle;
+
+	printk(KERN_INFO PREFIX "GPE = 0x%lx, I/O: command/status = 0x%lx, data = 0x%lx",
+			  ec->gpe, ec->command_addr, ec->data_addr);
+
+	return 0;
+}
+
 static int acpi_ec_add(struct acpi_device *device)
 {
-	acpi_status status = AE_OK;
 	struct acpi_ec *ec = NULL;
 
 	if (!device)
@@ -606,8 +701,7 @@ static int acpi_ec_add(struct acpi_device *device)
 	if (!ec)
 		return -ENOMEM;
 
-	status = ec_parse_device(device->handle, 0, ec, NULL);
-	if (status != AE_CTRL_TERMINATE) {
+	if (ec_parse_device(ec, device->handle)) {
 		kfree(ec);
 		return -EINVAL;
 	}
@@ -618,6 +712,8 @@ static int acpi_ec_add(struct acpi_device *device)
 			/* We might have incorrect info for GL at boot time */
 			mutex_lock(&boot_ec->lock);
 			boot_ec->global_lock = ec->global_lock;
+			/* Copy handlers from new ec into boot ec */
+			list_splice(&ec->list, &boot_ec->list);
 			mutex_unlock(&boot_ec->lock);
 			kfree(ec);
 			ec = boot_ec;
@@ -628,18 +724,24 @@ static int acpi_ec_add(struct acpi_device *device)
 	acpi_driver_data(device) = ec;
 
 	acpi_ec_add_fs(device);
-
 	return 0;
 }
 
 static int acpi_ec_remove(struct acpi_device *device, int type)
 {
 	struct acpi_ec *ec;
+	struct acpi_ec_query_handler *handler;
 
 	if (!device)
 		return -EINVAL;
 
 	ec = acpi_driver_data(device);
+	mutex_lock(&ec->lock);
+	list_for_each_entry(handler, &ec->list, node) {
+		list_del(&handler->node);
+		kfree(handler);
+	}
+	mutex_unlock(&ec->lock);
 	acpi_ec_remove_fs(device);
 	acpi_driver_data(device) = NULL;
 	if (ec == first_ec)
@@ -695,15 +797,13 @@ static int ec_install_handlers(struct acpi_ec *ec)
 		return -ENODEV;
 	}
 
-	/* EC is fully operational, allow queries */
-	atomic_set(&ec->query_pending, 0);
-
 	return 0;
 }
 
 static int acpi_ec_start(struct acpi_device *device)
 {
 	struct acpi_ec *ec;
+	int ret = 0;
 
 	if (!device)
 		return -EINVAL;
@@ -714,10 +814,13 @@ static int acpi_ec_start(struct acpi_device *device)
 		return -EINVAL;
 
 	/* Boot EC is already working */
-	if (ec == boot_ec)
-		return 0;
+	if (ec != boot_ec)
+		ret = ec_install_handlers(ec);
+
+	/* EC is fully operational, allow queries */
+	atomic_set(&ec->query_pending, 0);
 
-	return ec_install_handlers(ec);
+	return ret;
 }
 
 static int acpi_ec_stop(struct acpi_device *device, int type)
@@ -749,34 +852,6 @@ static int acpi_ec_stop(struct acpi_device *device, int type)
 	return 0;
 }
 
-static acpi_status
-ec_parse_device(acpi_handle handle, u32 Level, void *context, void **retval)
-{
-	acpi_status status;
-
-	struct acpi_ec *ec = context;
-	status = acpi_walk_resources(handle, METHOD_NAME__CRS,
-				     ec_parse_io_ports, ec);
-	if (ACPI_FAILURE(status))
-		return status;
-
-	/* Get GPE bit assignment (EC events). */
-	/* TODO: Add support for _GPE returning a package */
-	status = acpi_evaluate_integer(handle, "_GPE", NULL, &ec->gpe);
-	if (ACPI_FAILURE(status))
-		return status;
-
-	/* Use the global lock for all EC transactions? */
-	acpi_evaluate_integer(handle, "_GLK", NULL, &ec->global_lock);
-
-	ec->handle = handle;
-
-	printk(KERN_INFO PREFIX "GPE = 0x%lx, I/O: command/status = 0x%lx, data = 0x%lx",
-			  ec->gpe, ec->command_addr, ec->data_addr);
-
-	return AE_CTRL_TERMINATE;
-}
-
 int __init acpi_ec_ecdt_probe(void)
 {
 	int ret;

Re: [PATCH 1/3] ACPI EC: Re-factor EC space handler to avoid using label/goto for cycle.

[Len Brown]

Applied.

thanks,
-Len

On Tuesday 29 May 2007 08:42, Alexey Starikovskiy wrote:
> Signed-off-by: Alexey Starikovskiy <aystarik@gmail.com>
> ---
> 
>  drivers/acpi/ec.c |   56 ++++++++++++++++-------------------------------------
>  1 files changed, 17 insertions(+), 39 deletions(-)
> 
> diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
> index 82f496c..5534b23 100644
> --- a/drivers/acpi/ec.c
> +++ b/drivers/acpi/ec.c
> @@ -454,57 +454,35 @@ acpi_ec_space_setup(acpi_handle region_handle,
>  }
>  
>  static acpi_status
> -acpi_ec_space_handler(u32 function,
> -		      acpi_physical_address address,
> -		      u32 bit_width,
> -		      acpi_integer * value,
> +acpi_ec_space_handler(u32 function, acpi_physical_address address,
> +		      u32 bits, acpi_integer *value,
>  		      void *handler_context, void *region_context)
>  {
> -	int result = 0;
>  	struct acpi_ec *ec = handler_context;
> -	u64 temp = *value;
> -	acpi_integer f_v = 0;
> -	int i = 0;
> +	int result = 0, i = 0;
> +	u8 temp = 0;
>  
>  	if ((address > 0xFF) || !value || !handler_context)
>  		return AE_BAD_PARAMETER;
>  
> -	if (bit_width != 8 && acpi_strict) {
> +	if (function != ACPI_READ && function != ACPI_WRITE)
>  		return AE_BAD_PARAMETER;
> -	}
> -
> -      next_byte:
> -	switch (function) {
> -	case ACPI_READ:
> -		temp = 0;
> -		result = acpi_ec_read(ec, (u8) address, (u8 *) & temp);
> -		break;
> -	case ACPI_WRITE:
> -		result = acpi_ec_write(ec, (u8) address, (u8) temp);
> -		break;
> -	default:
> -		result = -EINVAL;
> -		goto out;
> -		break;
> -	}
>  
> -	bit_width -= 8;
> -	if (bit_width) {
> -		if (function == ACPI_READ)
> -			f_v |= temp << 8 * i;
> -		if (function == ACPI_WRITE)
> -			temp >>= 8;
> -		i++;
> -		address++;
> -		goto next_byte;
> -	}
> +	if (bits != 8 && acpi_strict)
> +		return AE_BAD_PARAMETER;
>  
> -	if (function == ACPI_READ) {
> -		f_v |= temp << 8 * i;
> -		*value = f_v;
> +	while (bits - i > 0) {
> +		if (function == ACPI_READ) {
> +			result = acpi_ec_read(ec, address, &temp);
> +			(*value) |= ((acpi_integer)temp) << i;
> +		} else {
> +			temp = 0xff & ((*value) >> i);
> +			result = acpi_ec_write(ec, address, temp);
> +		}
> +		i += 8;
> +		++address;
>  	}
>  
> -      out:
>  	switch (result) {
>  	case -EINVAL:
>  		return AE_BAD_PARAMETER;
> 
> -
> To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 
> 

Re: [PATCH 2/3] ACPI EC: drop usage of ACPI_DEBUG_PRINT as too heavy weight

[Len Brown]

Applied.

thanks,
-Len

On Tuesday 29 May 2007 08:42, Alexey Starikovskiy wrote:
> Signed-off-by: Alexey Starikovskiy <aystarik@gmail.com>
> ---
> 
>  drivers/acpi/ec.c |   20 ++++++--------------
>  1 files changed, 6 insertions(+), 14 deletions(-)
> 
> diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
> index 5534b23..ffb8361 100644
> --- a/drivers/acpi/ec.c
> +++ b/drivers/acpi/ec.c
> @@ -39,20 +39,19 @@
>  #include <acpi/acpi_drivers.h>
>  #include <acpi/actypes.h>
>  
> -#define _COMPONENT		ACPI_EC_COMPONENT
> -ACPI_MODULE_NAME("ec");
> -#define ACPI_EC_COMPONENT		0x00100000
>  #define ACPI_EC_CLASS			"embedded_controller"
>  #define ACPI_EC_HID			"PNP0C09"
>  #define ACPI_EC_DEVICE_NAME		"Embedded Controller"
>  #define ACPI_EC_FILE_INFO		"info"
>  #undef PREFIX
>  #define PREFIX				"ACPI: EC: "
> +
>  /* EC status register */
>  #define ACPI_EC_FLAG_OBF	0x01	/* Output buffer full */
>  #define ACPI_EC_FLAG_IBF	0x02	/* Input buffer full */
>  #define ACPI_EC_FLAG_BURST	0x10	/* burst mode */
>  #define ACPI_EC_FLAG_SCI	0x20	/* EC-SCI occurred */
> +
>  /* EC commands */
>  enum ec_command {
>  	ACPI_EC_COMMAND_READ = 0x80,
> @@ -245,7 +244,7 @@ static int acpi_ec_transaction(struct acpi_ec *ec, u8 command,
>  
>  	status = acpi_ec_wait(ec, ACPI_EC_EVENT_IBF_0, 0, 0);
>  	if (status) {
> -		printk(KERN_DEBUG PREFIX
> +		printk(KERN_ERR PREFIX
>  		       "input buffer is not empty, aborting transaction\n");
>  		goto end;
>  	}
> @@ -630,10 +629,6 @@ static int acpi_ec_add(struct acpi_device *device)
>  
>  	acpi_ec_add_fs(device);
>  
> -	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "%s [%s] (gpe %d) interrupt mode.",
> -			  acpi_device_name(device), acpi_device_bid(device),
> -			  (u32) ec->gpe));
> -
>  	return 0;
>  }
>  
> @@ -718,9 +713,6 @@ static int acpi_ec_start(struct acpi_device *device)
>  	if (!ec)
>  		return -EINVAL;
>  
> -	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "gpe=0x%02lx, ports=0x%2lx,0x%2lx",
> -			  ec->gpe, ec->command_addr, ec->data_addr));
> -
>  	/* Boot EC is already working */
>  	if (ec == boot_ec)
>  		return 0;
> @@ -779,8 +771,8 @@ ec_parse_device(acpi_handle handle, u32 Level, void *context, void **retval)
>  
>  	ec->handle = handle;
>  
> -	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "GPE=0x%02lx, ports=0x%2lx, 0x%2lx",
> -			  ec->gpe, ec->command_addr, ec->data_addr));
> +	printk(KERN_INFO PREFIX "GPE = 0x%lx, I/O: command/status = 0x%lx, data = 0x%lx",
> +			  ec->gpe, ec->command_addr, ec->data_addr);
>  
>  	return AE_CTRL_TERMINATE;
>  }
> @@ -803,7 +795,7 @@ int __init acpi_ec_ecdt_probe(void)
>  	if (ACPI_FAILURE(status))
>  		goto error;
>  
> -	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found ECDT"));
> +	printk(KERN_INFO PREFIX "EC description table is found, configuring boot EC\n");
>  
>  	boot_ec->command_addr = ecdt_ptr->control.address;
>  	boot_ec->data_addr = ecdt_ptr->data.address;
> 
> -
> To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 
> 

Re: [PATCH 3/3] ACPI EC: Add support for non-AML EC query handlers

[Len Brown]

What is the benefit of this patch?
(it would be good to say in the check-in comments...hint hint)

Also, if you want your git commit author tag to be
"Alexey Starikovskiy <astarikovskiy@suse.de>" as you mentioned earlier,
then this would be a good time to cut over to sending patches From
and signed-off-by that address.

thanks,
-Len

On Tuesday 29 May 2007 08:43, Alexey Starikovskiy wrote:
> Signed-off-by: Alexey Starikovskiy <aystarik@gmail.com>
> ---
> 
>  drivers/acpi/ec.c |  175 ++++++++++++++++++++++++++++++++++++++---------------
>  1 files changed, 125 insertions(+), 50 deletions(-)
> 
> diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
> index ffb8361..10e8510 100644
> --- a/drivers/acpi/ec.c
> +++ b/drivers/acpi/ec.c
> @@ -34,6 +34,7 @@
>  #include <linux/proc_fs.h>
>  #include <linux/seq_file.h>
>  #include <linux/interrupt.h>
> +#include <linux/list.h>
>  #include <asm/io.h>
>  #include <acpi/acpi_bus.h>
>  #include <acpi/acpi_drivers.h>
> @@ -43,6 +44,7 @@
>  #define ACPI_EC_HID			"PNP0C09"
>  #define ACPI_EC_DEVICE_NAME		"Embedded Controller"
>  #define ACPI_EC_FILE_INFO		"info"
> +
>  #undef PREFIX
>  #define PREFIX				"ACPI: EC: "
>  
> @@ -60,6 +62,7 @@ enum ec_command {
>  	ACPI_EC_BURST_DISABLE = 0x83,
>  	ACPI_EC_COMMAND_QUERY = 0x84,
>  };
> +
>  /* EC events */
>  enum ec_event {
>  	ACPI_EC_EVENT_OBF_1 = 1,	/* Output buffer full */
> @@ -93,6 +96,16 @@ static struct acpi_driver acpi_ec_driver = {
>  
>  /* If we find an EC via the ECDT, we need to keep a ptr to its context */
>  /* External interfaces use first EC only, so remember */
> +typedef int (*acpi_ec_query_func) (void *data);
> +
> +struct acpi_ec_query_handler {
> +	struct list_head node;
> +	acpi_ec_query_func func;
> +	acpi_handle handle;
> +	void *data;
> +	u8 query_bit;
> +};
> +
>  static struct acpi_ec {
>  	acpi_handle handle;
>  	unsigned long gpe;
> @@ -103,6 +116,7 @@ static struct acpi_ec {
>  	atomic_t query_pending;
>  	atomic_t event_count;
>  	wait_queue_head_t wait;
> +	struct list_head list;
>  } *boot_ec, *first_ec;
>  
>  /* --------------------------------------------------------------------------
> @@ -393,21 +407,67 @@ static int acpi_ec_query(struct acpi_ec *ec, u8 * data)
>  /* --------------------------------------------------------------------------
>                                  Event Management
>     -------------------------------------------------------------------------- */
> +int acpi_ec_add_query_handler(struct acpi_ec *ec, u8 query_bit,
> +			      acpi_handle handle, acpi_ec_query_func func,
> +			      void *data)
> +{
> +	struct acpi_ec_query_handler *handler =
> +	    kzalloc(sizeof(struct acpi_ec_query_handler), GFP_KERNEL);
> +	if (!handler)
> +		return -ENOMEM;
> +
> +	handler->query_bit = query_bit;
> +	handler->handle = handle;
> +	handler->func = func;
> +	handler->data = data;
> +	mutex_lock(&ec->lock);
> +	list_add_tail(&handler->node, &ec->list);
> +	mutex_unlock(&ec->lock);
> +	return 0;
> +}
> +
> +EXPORT_SYMBOL_GPL(acpi_ec_add_query_handler);
> +
> +void acpi_ec_remove_query_handler(struct acpi_ec *ec, u8 query_bit)
> +{
> +	struct acpi_ec_query_handler *handler;
> +	mutex_lock(&ec->lock);
> +	list_for_each_entry(handler, &ec->list, node) {
> +		if (query_bit == handler->query_bit) {
> +			list_del(&handler->node);
> +			kfree(handler);
> +			break;
> +		}
> +	}
> +	mutex_unlock(&ec->lock);
> +}
> +
> +EXPORT_SYMBOL_GPL(acpi_ec_remove_query_handler);
>  
>  static void acpi_ec_gpe_query(void *ec_cxt)
>  {
>  	struct acpi_ec *ec = ec_cxt;
>  	u8 value = 0;
> -	char object_name[8];
> +	struct acpi_ec_query_handler *handler, copy;
>  
>  	if (!ec || acpi_ec_query(ec, &value))
>  		return;
> -
> -	snprintf(object_name, 8, "_Q%2.2X", value);
> -
> -	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Evaluating %s", object_name));
> -
> -	acpi_evaluate_object(ec->handle, object_name, NULL, NULL);
> +	mutex_lock(&ec->lock);
> +	list_for_each_entry(handler, &ec->list, node) {
> +		if (value == handler->query_bit) {
> +			/* have custom handler for this bit */
> +			memcpy(&copy, handler, sizeof(copy));
> +			mutex_unlock(&ec->lock);
> +			if (copy.func) {
> +				copy.func(copy.data);
> +			} else if (copy.handle) {
> +				acpi_evaluate_object(copy.handle, NULL, NULL, NULL);
> +			}
> +			return;
> +		}
> +	}
> +	mutex_unlock(&ec->lock);
> +	printk(KERN_ERR PREFIX "Handler for query 0x%x is not found!\n", value);
>  }
>  
>  static u32 acpi_ec_gpe_handler(void *data)
> @@ -426,8 +486,7 @@ static u32 acpi_ec_gpe_handler(void *data)
>  	if ((value & ACPI_EC_FLAG_SCI) && !atomic_read(&ec->query_pending)) {
>  		atomic_set(&ec->query_pending, 1);
>  		status =
> -		    acpi_os_execute(OSL_EC_BURST_HANDLER, acpi_ec_gpe_query,
> -				    ec);
> +		    acpi_os_execute(OSL_EC_BURST_HANDLER, acpi_ec_gpe_query, ec);
>  	}
>  
>  	return status == AE_OK ?
> @@ -574,9 +633,6 @@ static int acpi_ec_remove_fs(struct acpi_device *device)
>  static acpi_status
>  ec_parse_io_ports(struct acpi_resource *resource, void *context);
>  
> -static acpi_status
> -ec_parse_device(acpi_handle handle, u32 Level, void *context, void **retval);
> -
>  static struct acpi_ec *make_acpi_ec(void)
>  {
>  	struct acpi_ec *ec = kzalloc(sizeof(struct acpi_ec), GFP_KERNEL);
> @@ -587,13 +643,52 @@ static struct acpi_ec *make_acpi_ec(void)
>  	atomic_set(&ec->event_count, 1);
>  	mutex_init(&ec->lock);
>  	init_waitqueue_head(&ec->wait);
> +	INIT_LIST_HEAD(&ec->list);
>  
>  	return ec;
>  }
>  
> +static acpi_status
> +acpi_ec_register_query_methods(acpi_handle handle, u32 level,
> +			       void *context, void **return_value)
> +{
> +	struct acpi_namespace_node *node = handle;
> +	struct acpi_ec *ec = context;
> +	int value = 0;
> +	if (sscanf(node->name.ascii, "_Q%x", &value) == 1) {
> +		acpi_ec_add_query_handler(ec, value, handle, NULL, NULL);
> +	}
> +	return AE_OK;
> +}
> +
> +static int ec_parse_device(struct acpi_ec *ec, acpi_handle handle)
> +{
> +	if (ACPI_FAILURE(acpi_walk_resources(handle, METHOD_NAME__CRS,
> +				     ec_parse_io_ports, ec)))
> +		return -EINVAL;
> +
> +	/* Get GPE bit assignment (EC events). */
> +	/* TODO: Add support for _GPE returning a package */
> +	if (ACPI_FAILURE(acpi_evaluate_integer(handle, "_GPE", NULL, &ec->gpe)))
> +		return -EINVAL;
> +
> +	/* Use the global lock for all EC transactions? */
> +	acpi_evaluate_integer(handle, "_GLK", NULL, &ec->global_lock);
> +
> +	/* Find and register all query methods */
> +	acpi_walk_namespace(ACPI_TYPE_METHOD, handle, 1,
> +			    acpi_ec_register_query_methods, ec, NULL);
> +
> +	ec->handle = handle;
> +
> +	printk(KERN_INFO PREFIX "GPE = 0x%lx, I/O: command/status = 0x%lx, data = 0x%lx",
> +			  ec->gpe, ec->command_addr, ec->data_addr);
> +
> +	return 0;
> +}
> +
>  static int acpi_ec_add(struct acpi_device *device)
>  {
> -	acpi_status status = AE_OK;
>  	struct acpi_ec *ec = NULL;
>  
>  	if (!device)
> @@ -606,8 +701,7 @@ static int acpi_ec_add(struct acpi_device *device)
>  	if (!ec)
>  		return -ENOMEM;
>  
> -	status = ec_parse_device(device->handle, 0, ec, NULL);
> -	if (status != AE_CTRL_TERMINATE) {
> +	if (ec_parse_device(ec, device->handle)) {
>  		kfree(ec);
>  		return -EINVAL;
>  	}
> @@ -618,6 +712,8 @@ static int acpi_ec_add(struct acpi_device *device)
>  			/* We might have incorrect info for GL at boot time */
>  			mutex_lock(&boot_ec->lock);
>  			boot_ec->global_lock = ec->global_lock;
> +			/* Copy handlers from new ec into boot ec */
> +			list_splice(&ec->list, &boot_ec->list);
>  			mutex_unlock(&boot_ec->lock);
>  			kfree(ec);
>  			ec = boot_ec;
> @@ -628,18 +724,24 @@ static int acpi_ec_add(struct acpi_device *device)
>  	acpi_driver_data(device) = ec;
>  
>  	acpi_ec_add_fs(device);
> -
>  	return 0;
>  }
>  
>  static int acpi_ec_remove(struct acpi_device *device, int type)
>  {
>  	struct acpi_ec *ec;
> +	struct acpi_ec_query_handler *handler;
>  
>  	if (!device)
>  		return -EINVAL;
>  
>  	ec = acpi_driver_data(device);
> +	mutex_lock(&ec->lock);
> +	list_for_each_entry(handler, &ec->list, node) {
> +		list_del(&handler->node);
> +		kfree(handler);
> +	}
> +	mutex_unlock(&ec->lock);
>  	acpi_ec_remove_fs(device);
>  	acpi_driver_data(device) = NULL;
>  	if (ec == first_ec)
> @@ -695,15 +797,13 @@ static int ec_install_handlers(struct acpi_ec *ec)
>  		return -ENODEV;
>  	}
>  
> -	/* EC is fully operational, allow queries */
> -	atomic_set(&ec->query_pending, 0);
> -
>  	return 0;
>  }
>  
>  static int acpi_ec_start(struct acpi_device *device)
>  {
>  	struct acpi_ec *ec;
> +	int ret = 0;
>  
>  	if (!device)
>  		return -EINVAL;
> @@ -714,10 +814,13 @@ static int acpi_ec_start(struct acpi_device *device)
>  		return -EINVAL;
>  
>  	/* Boot EC is already working */
> -	if (ec == boot_ec)
> -		return 0;
> +	if (ec != boot_ec)
> +		ret = ec_install_handlers(ec);
> +
> +	/* EC is fully operational, allow queries */
> +	atomic_set(&ec->query_pending, 0);
>  
> -	return ec_install_handlers(ec);
> +	return ret;
>  }
>  
>  static int acpi_ec_stop(struct acpi_device *device, int type)
> @@ -749,34 +852,6 @@ static int acpi_ec_stop(struct acpi_device *device, int type)
>  	return 0;
>  }
>  
> -static acpi_status
> -ec_parse_device(acpi_handle handle, u32 Level, void *context, void **retval)
> -{
> -	acpi_status status;
> -
> -	struct acpi_ec *ec = context;
> -	status = acpi_walk_resources(handle, METHOD_NAME__CRS,
> -				     ec_parse_io_ports, ec);
> -	if (ACPI_FAILURE(status))
> -		return status;
> -
> -	/* Get GPE bit assignment (EC events). */
> -	/* TODO: Add support for _GPE returning a package */
> -	status = acpi_evaluate_integer(handle, "_GPE", NULL, &ec->gpe);
> -	if (ACPI_FAILURE(status))
> -		return status;
> -
> -	/* Use the global lock for all EC transactions? */
> -	acpi_evaluate_integer(handle, "_GLK", NULL, &ec->global_lock);
> -
> -	ec->handle = handle;
> -
> -	printk(KERN_INFO PREFIX "GPE = 0x%lx, I/O: command/status = 0x%lx, data = 0x%lx",
> -			  ec->gpe, ec->command_addr, ec->data_addr);
> -
> -	return AE_CTRL_TERMINATE;
> -}
> -
>  int __init acpi_ec_ecdt_probe(void)
>  {
>  	int ret;
> 
> -
> To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>