* fan problem on new mainboard
@ 2007-08-09 8:54 Robert Lemmen
2007-08-09 10:01 ` Zhang Rui
0 siblings, 1 reply; 5+ messages in thread
From: Robert Lemmen @ 2007-08-09 8:54 UTC (permalink / raw)
To: linux-acpi
[-- Attachment #1: Type: text/plain, Size: 5599 bytes --]
hi folks,
i got a new mainboard, an asrock conroe1333 (intel socket 775 thing). so
far everything is nice except the cpu fan, which is always spinning at
top speed. from what i understand, it should be possible to change this
with acpi, or even make it spin depending on the cpu temperature.
(right?) acpi on this box however doesn't seem to do this, i have got no
entries in /proc/acpi/fan or .../thermal_zone. i googled around a bit
and thought it might be the dsdt, so i de- and recompiled it, a few
warnings but no errors. i am running out of ideas how to go on, so if
anyone could give me a hint on how to get this working, or where to
look, i'd appreciate it. the kernel is 2.6.22 (amd64), and the output of
dmesg | grep -i acpi is attached. if you need any other info, holler!
oh, and i tried with and without the acpi_os_name line, of course.
thanks robert
Command line: root=/dev/mapper/cryptroot cryptopts=source=/dev/md0 acpi_os_name="Microsoft Windows XP" ro
BIOS-e820: 000000007f7b0000 - 000000007f7c0000 (ACPI data)
BIOS-e820: 000000007f7c0000 - 000000007f7f0000 (ACPI NVS)
ACPI: RSDP 000F91B0, 0014 (r0 ACPIAM)
ACPI: RSDT 7F7B0000, 0038 (r1 A_M_I OEMRSDT 5000702 MSFT 97)
ACPI: FACP 7F7B0200, 0084 (r2 A M I OEMFACP 12000601 MSFT 97)
ACPI: DSDT 7F7B0440, 4B0B (r1 ASR18 ASR18032 32 INTL 2002026)
ACPI: FACS 7F7C0000, 0040
ACPI: APIC 7F7B0390, 006C (r1 A_M_I OEMAPIC 5000702 MSFT 97)
ACPI: MCFG 7F7B0400, 003C (r1 A_M_I OEMMCFG 5000702 MSFT 97)
ACPI: OEMB 7F7C0040, 0046 (r1 A_M_I AMI_OEM 5000702 MSFT 97)
ACPI: HPET 7F7B4F50, 0038 (r1 A_M_I OEMHPET 5000702 MSFT 97)
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Kernel command line: root=/dev/mapper/cryptroot cryptopts=source=/dev/md0 acpi_os_name="Microsoft Windows XP" ro
ACPI: Core revision 20070126
ACPI: Overriding _OS definition to 'Microsoft Windows XP'
ACPI: bus type pci registered
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 *15)
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: ACPI device : hid PNP0A08
pnp: ACPI device : hid PNP0C01
pnp: ACPI device : hid PNP0200
pnp: ACPI device : hid PNP0B00
pnp: ACPI device : hid PNP0800
pnp: ACPI device : hid PNP0C04
pnp: ACPI device : hid PNP0510
pnp: ACPI device : hid PNP0700
pnp: ACPI device : hid PNP0401
pnp: ACPI device : hid PNP0C02
pnp: ACPI device : hid PNP0103
pnp: ACPI device : hid INT0800
pnp: ACPI device : hid PNP0C02
pnp: ACPI device : hid PNP0C02
pnp: ACPI device : hid PNP0303
pnp: ACPI device : hid PNP0F03
pnp: ACPI device : hid PNP0501
pnp: ACPI device : hid PNP0C02
pnp: ACPI device : hid PNP0C02
pnp: ACPI device : hid PNP0C01
pnp: PnP ACPI: found 20 devices
ACPI: ACPI bus type pnp unregistered
PCI: Using ACPI for IRQ routing
ACPI: RTC can wake from S4
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not present [20070126]
ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not present [20070126]
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 17 (level, low) -> IRQ 17
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19
parport_pc 00:08: reported by Plug and Play ACPI
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
--
Robert Lemmen http://www.semistable.com
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: fan problem on new mainboard
2007-08-09 8:54 fan problem on new mainboard Robert Lemmen
@ 2007-08-09 10:01 ` Zhang Rui
2007-08-11 15:13 ` Robert Lemmen
0 siblings, 1 reply; 5+ messages in thread
From: Zhang Rui @ 2007-08-09 10:01 UTC (permalink / raw)
To: Robert Lemmen; +Cc: linux-acpi
On Thu, 2007-08-09 at 10:54 +0200, Robert Lemmen wrote:
> hi folks,
>
> i got a new mainboard, an asrock conroe1333 (intel socket 775 thing). so
> far everything is nice except the cpu fan, which is always spinning at
> top speed. from what i understand, it should be possible to change this
> with acpi, or even make it spin depending on the cpu temperature.
> (right?) acpi on this box however doesn't seem to do this, i have got no
> entries in /proc/acpi/fan or .../thermal_zone. i googled around a bit
> and thought it might be the dsdt, so i de- and recompiled it, a few
> warnings but no errors. i am running out of ideas how to go on, so if
> anyone could give me a hint on how to get this working, or where to
> look, i'd appreciate it. the kernel is 2.6.22 (amd64), and the output of
> dmesg | grep -i acpi is attached. if you need any other info, holler!
>
> oh, and i tried with and without the acpi_os_name line, of course.
>
Hi, Robert,
Please attach the full _dmesg_ output as well as the acpidump.
Thanks,
Rui
>
> Command line: root=/dev/mapper/cryptroot cryptopts=source=/dev/md0 acpi_os_name="Microsoft Windows XP" ro
> BIOS-e820: 000000007f7b0000 - 000000007f7c0000 (ACPI data)
> BIOS-e820: 000000007f7c0000 - 000000007f7f0000 (ACPI NVS)
> ACPI: RSDP 000F91B0, 0014 (r0 ACPIAM)
> ACPI: RSDT 7F7B0000, 0038 (r1 A_M_I OEMRSDT 5000702 MSFT 97)
> ACPI: FACP 7F7B0200, 0084 (r2 A M I OEMFACP 12000601 MSFT 97)
> ACPI: DSDT 7F7B0440, 4B0B (r1 ASR18 ASR18032 32 INTL 2002026)
> ACPI: FACS 7F7C0000, 0040
> ACPI: APIC 7F7B0390, 006C (r1 A_M_I OEMAPIC 5000702 MSFT 97)
> ACPI: MCFG 7F7B0400, 003C (r1 A_M_I OEMMCFG 5000702 MSFT 97)
> ACPI: OEMB 7F7C0040, 0046 (r1 A_M_I AMI_OEM 5000702 MSFT 97)
> ACPI: HPET 7F7B4F50, 0038 (r1 A_M_I OEMHPET 5000702 MSFT 97)
> ACPI: PM-Timer IO Port: 0x808
> ACPI: Local APIC address 0xfee00000
> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
> ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
> ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
> ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> ACPI: IRQ0 used by override.
> ACPI: IRQ2 used by override.
> ACPI: IRQ9 used by override.
> ACPI: HPET id: 0x8086a201 base: 0xfed00000
> Using ACPI (MADT) for SMP configuration information
> Kernel command line: root=/dev/mapper/cryptroot cryptopts=source=/dev/md0 acpi_os_name="Microsoft Windows XP" ro
> ACPI: Core revision 20070126
> ACPI: Overriding _OS definition to 'Microsoft Windows XP'
> ACPI: bus type pci registered
> ACPI: Interpreter enabled
> ACPI: (supports S0 S1 S3 S4 S5)
> ACPI: Using IOAPIC for interrupt routing
> ACPI: PCI Root Bridge [PCI0] (0000:00)
> PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
> ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
> ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
> ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
> ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
> ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
> ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
> ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
> ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 *15)
> pnp: PnP ACPI init
> ACPI: bus type pnp registered
> pnp: ACPI device : hid PNP0A08
> pnp: ACPI device : hid PNP0C01
> pnp: ACPI device : hid PNP0200
> pnp: ACPI device : hid PNP0B00
> pnp: ACPI device : hid PNP0800
> pnp: ACPI device : hid PNP0C04
> pnp: ACPI device : hid PNP0510
> pnp: ACPI device : hid PNP0700
> pnp: ACPI device : hid PNP0401
> pnp: ACPI device : hid PNP0C02
> pnp: ACPI device : hid PNP0103
> pnp: ACPI device : hid INT0800
> pnp: ACPI device : hid PNP0C02
> pnp: ACPI device : hid PNP0C02
> pnp: ACPI device : hid PNP0303
> pnp: ACPI device : hid PNP0F03
> pnp: ACPI device : hid PNP0501
> pnp: ACPI device : hid PNP0C02
> pnp: ACPI device : hid PNP0C02
> pnp: ACPI device : hid PNP0C01
> pnp: PnP ACPI: found 20 devices
> ACPI: ACPI bus type pnp unregistered
> PCI: Using ACPI for IRQ routing
> ACPI: RTC can wake from S4
> ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
> ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
> ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not present [20070126]
> ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not present [20070126]
> ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
> ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
> ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
> ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
> ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
> ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 17 (level, low) -> IRQ 17
> ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
> ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
> ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19
> parport_pc 00:08: reported by Plug and Play ACPI
> ACPI: Power Button (FF) [PWRF]
> ACPI: Power Button (CM) [PWRB]
> ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: fan problem on new mainboard
2007-08-09 10:01 ` Zhang Rui
@ 2007-08-11 15:13 ` Robert Lemmen
2007-08-16 13:08 ` Thomas Renninger
0 siblings, 1 reply; 5+ messages in thread
From: Robert Lemmen @ 2007-08-11 15:13 UTC (permalink / raw)
To: linux-acpi
[-- Attachment #1: Type: text/plain, Size: 725 bytes --]
On Thu, Aug 09, 2007 at 06:01:29PM +0800, Zhang Rui wrote:
> Hi, Robert,
> Please attach the full _dmesg_ output as well as the acpidump.
sorry for the delay, the list seems to eat mails with lareg attachemnts,
therefore you can find the files here:
http://www.semistable.com/files/dmesg
http://www.semistable.com/files/acpidump
(perhaps) interestingly acpidump also said (on stderr):
Wrong checksum for generic table!
as a reminder because it took so long: the problem is that i have
nothing in /proc/acpi/thermal_zone or proc/acpi//fan, and my cpu fan is
spinning like crazy even though my cpu is ice cold
thanks robert
--
Robert Lemmen http://www.semistable.com
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: fan problem on new mainboard
2007-08-11 15:13 ` Robert Lemmen
@ 2007-08-16 13:08 ` Thomas Renninger
2007-08-17 10:35 ` Robert Lemmen
0 siblings, 1 reply; 5+ messages in thread
From: Thomas Renninger @ 2007-08-16 13:08 UTC (permalink / raw)
To: Robert Lemmen; +Cc: linux-acpi
On Sat, 2007-08-11 at 17:13 +0200, Robert Lemmen wrote:
> On Thu, Aug 09, 2007 at 06:01:29PM +0800, Zhang Rui wrote:
> > Hi, Robert,
> > Please attach the full _dmesg_ output as well as the acpidump.
>
> sorry for the delay, the list seems to eat mails with lareg attachemnts,
> therefore you can find the files here:
>
> http://www.semistable.com/files/dmesg
> http://www.semistable.com/files/acpidump
>
> (perhaps) interestingly acpidump also said (on stderr):
> Wrong checksum for generic table!
>
> as a reminder because it took so long: the problem is that i have
> nothing in /proc/acpi/thermal_zone or proc/acpi//fan, and my cpu fan is
> spinning like crazy even though my cpu is ice cold
Your ACPI DSDT table does not show any thermal/fan control code.
So you won't be able to do much through ACPI.
Have you already searched for a BIOS update?
If you still have problems, maybe you find something in the BIOS
configuration...
Thomas
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: fan problem on new mainboard
2007-08-16 13:08 ` Thomas Renninger
@ 2007-08-17 10:35 ` Robert Lemmen
0 siblings, 0 replies; 5+ messages in thread
From: Robert Lemmen @ 2007-08-17 10:35 UTC (permalink / raw)
To: linux-acpi
[-- Attachment #1: Type: text/plain, Size: 691 bytes --]
On Thu, Aug 16, 2007 at 03:08:20PM +0200, Thomas Renninger wrote:
> Your ACPI DSDT table does not show any thermal/fan control code.
> So you won't be able to do much through ACPI.
> Have you already searched for a BIOS update?
> If you still have problems, maybe you find something in the BIOS
> configuration...
bios configuration is fine, the bios changelog update doesn't say
anything about fans or such, but i'll try anyway. this is gonna be a
drag without a floppy drive or a windows boot disk...
anyway, thnks for the info, i'll do the update and see if this improves
things.
cu robert
--
Robert Lemmen http://www.semistable.com
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2007-08-17 10:35 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-08-09 8:54 fan problem on new mainboard Robert Lemmen
2007-08-09 10:01 ` Zhang Rui
2007-08-11 15:13 ` Robert Lemmen
2007-08-16 13:08 ` Thomas Renninger
2007-08-17 10:35 ` Robert Lemmen
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).