* Re: 2.6.23-mm1 [not found] <20071011213126.cf92efb7.akpm@linux-foundation.org> @ 2007-10-12 21:32 ` Rafael J. Wysocki 2007-10-15 16:09 ` 2.6.23-mm1 Mark Gross 2007-10-17 17:21 ` [PATCH] static initialization and blocking notification for pm_qos... was 2.6.23-mm1 Mark Gross 0 siblings, 2 replies; 8+ messages in thread From: Rafael J. Wysocki @ 2007-10-12 21:32 UTC (permalink / raw) To: Andrew Morton Cc: linux-kernel, ACPI Devel Maling List, Mark Gross, Len Brown, Arjan van de Ven [-- Attachment #1: Type: text/plain, Size: 2135 bytes --] On Friday, 12 October 2007 06:31, Andrew Morton wrote: > > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.23/2.6.23-mm1/ > > - I've been largely avoiding applying anything since rc8-mm2 in an attempt > to stabilise things for the 2.6.23 merge. > > But that didn't stop all the subsystem maintainers from going nuts, with > the usual accuracy. We're up to a 37MB diff now, but it seems to be working > a bit better. I get many traces similar to the one below from it (w/ hotfixes): WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() Call Trace: [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 [<ffffffff8024ee6d>] update_target+0x71/0x76 [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2 [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 [<ffffffff8022f18e>] default_wake_function+0x0/0xf [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 [<ffffffff80282e91>] vma_link+0xdd/0x10b [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 [<ffffffff802a0896>] do_ioctl+0x2a/0x77 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b [<ffffffff8020bfde>] system_call+0x7e/0x83 Full dmesg attached. Greetings, Rafael [-- Attachment #2: dmesg.log --] [-- Type: text/x-log, Size: 184579 bytes --] Linux version 2.6.23-mm1 (rafael@albercik) (gcc version 4.1.2 20061115 (prerelease) (SUSE Linux)) #26 SMP Fri Oct 12 22:59:33 CEST 2007 Command line: root=/dev/sda3 vga=792 resume=/dev/sda1 no_console_suspend BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000077fd0000 (usable) BIOS-e820: 0000000077fd0000 - 0000000077fe5600 (reserved) BIOS-e820: 0000000077fe5600 - 0000000077ff8000 (ACPI NVS) BIOS-e820: 0000000077ff8000 - 0000000080000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec02000 (reserved) BIOS-e820: 00000000ffbc0000 - 00000000ffcc0000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) Entering add_active_range(0, 0, 159) 0 entries of 256 used Entering add_active_range(0, 256, 491472) 1 entries of 256 used end_pfn_map = 1048576 DMI 2.4 present. ACPI: RSDP 000F7D30, 0024 (r2 HP ) ACPI: XSDT 77FE57B4, 0054 (r1 HP 0944 6070620 HP 1) ACPI: FACP 77FE5684, 00F4 (r4 HP 0944 3 HP 1) ACPI: DSDT 77FE58DC, EE7A (r1 HP SB400 10000 MSFT 100000E) ACPI: FACS 77FF7E80, 0040 ACPI: APIC 77FE5808, 0062 (r1 HP 0944 1 HP 1) ACPI: MCFG 77FE586C, 003C (r1 HP 0944 1 HP 1) ACPI: TCPA 77FE58A8, 0032 (r2 HP 0944 1 HP 1) ACPI: SSDT 77FF4756, 0059 (r1 HP HPQNLP 1 MSFT 100000E) ACPI: SSDT 77FF47AF, 0206 (r1 HP PSSTBLID 1 HP 1) Entering add_active_range(0, 0, 159) 0 entries of 256 used Entering add_active_range(0, 256, 491472) 1 entries of 256 used No mptable found. sizeof(struct page) = 56 Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1048576 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0 -> 159 0: 256 -> 491472 On node 0 totalpages: 491375 Node 0 memmap at 0xffff810001000000 size 27525120 first pfn 0xffff810001000000 DMA zone: 56 pages used for memmap DMA zone: 1481 pages reserved DMA zone: 2462 pages, LIFO batch:0 DMA32 zone: 6663 pages used for memmap DMA32 zone: 480713 pages, LIFO batch:31 Normal zone: 0 pages used for memmap Movable zone: 0 pages used for memmap ATI board detected. Disabling timer routing over 8254. ACPI: PM-Timer IO Port: 0x8008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. Setting APIC routing to flat Using ACPI (MADT) for SMP configuration information swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000 swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000 Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) SMP: Allowing 2 CPUs, 0 hotplug CPUs PERCPU: Allocating 46704 bytes of per cpu data Built 1 zonelists in Zone order, mobility grouping on. Total pages: 483175 Kernel command line: root=/dev/sda3 vga=792 resume=/dev/sda1 no_console_suspend Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Extended CMOS year: 2000 TSC calibrated against PM_TIMER Marking TSC unstable due to TSCs unsynchronized time.c: Detected 1995.006 MHz processor. Console: colour dummy device 80x25 console [tty0] enabled Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Checking aperture... CPU 0: aperture @ 108000000 size 32 MB Aperture too small (32 MB) No AGP bridge found Memory: 1923916k/1965888k available (2285k kernel code, 41360k reserved, 1517k data, 252k init) Calibrating delay using timer specific routine.. 3994.14 BogoMIPS (lpj=7988280) Security Framework initialized Capability LSM initialized Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 SMP alternatives: switching to UP code ACPI: Core revision 20070126 Parsing all Control Methods: Table [DSDT](id 0001) - 1153 Objects with 113 Devices 337 Methods 33 Regions Parsing all Control Methods: Table [SSDT](id 0002) - 2 Objects with 0 Devices 2 Methods 0 Regions Parsing all Control Methods: Table [SSDT](id 0003) - 8 Objects with 0 Devices 0 Methods 0 Regions tbxface-0598 [00] tb_load_namespace : ACPI Tables successfully acquired evxfevnt-0091 [00] enable : Transition to ACPI mode successful ..MP-BIOS bug: 8254 timer not connected to IO-APIC Disabling APIC timer SMP alternatives: switching to SMP code Booting processor 1/2 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 3990.29 BogoMIPS (lpj=7980587) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping 02 Brought up 2 CPUs CPU0 attaching sched-domain: domain 0: span 00000000,00000000,00000000,00000003 groups: 00000000,00000000,00000000,00000001 00000000,00000000,00000000,00000002 CPU1 attaching sched-domain: domain 0: span 00000000,00000000,00000000,00000003 groups: 00000000,00000000,00000000,00000002 00000000,00000000,00000000,00000001 net_namespace: 120 bytes Time: 21:13:03 Date: 10/12/07 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using configuration type 1 evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x15 evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 3 Wake, Enabled 11 Runtime GPEs in this block ACPI: EC: Look up EC in DSDT Completing Region/Field/Buffer/Package initialization:................................................................................................................................................................ Initialized 29/33 Regions 0/0 Fields 63/64 Buffers 68/78 Packages (1172 nodes) Initializing Device/Processor/Thermal objects by executing _INI methods:....... Executed 7 _INI methods requiring 2 _STA executions (examined 120 objects) ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing PCI: MCFG configuration 0: base 3758096384 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in ACPI motherboard resources PCI: Using MMCONFIG at e0000000 - efffffff PCI: No mmconfig possible on device 00:18 ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 ACPI: PCI Root Bridge [C074] (0000:00) PCI: Transparent bridge - 0000:00:14.4 ACPI: PCI Interrupt Routing Table [\_SB_.C074._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C074.C075._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C074.C0DF._PRT] ACPI: PCI Interrupt Link [C125] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C126] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C127] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C128] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C129] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C12A] (IRQs 9) *0, disabled. ACPI: PCI Interrupt Link [C12B] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C12C] (IRQs *10 11) ACPI: Power Resource [C223] (off) ACPI: Power Resource [C1FE] (off) ACPI: Power Resource [C217] (on) ACPI: Power Resource [C34B] (off) ACPI: Power Resource [C34C] (off) ACPI: Power Resource [C34D] (off) ACPI: Power Resource [C34E] (off) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered SCSI subsystem initialized libata version 3.00 loaded. PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Cannot allocate resource region 0 of device 0000:00:14.2 NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default DMAR:No DMAR devices found ACPI: RTC can wake from S4 system 00:00: iomem range 0x0-0x9ffff could not be reserved system 00:00: iomem range 0xe0000-0xfffff could not be reserved system 00:00: iomem range 0x100000-0x77ffffff could not be reserved system 00:0a: ioport range 0x40b-0x40b has been reserved system 00:0a: ioport range 0x4d0-0x4d1 has been reserved system 00:0a: ioport range 0x4d6-0x4d6 has been reserved system 00:0a: iomem range 0xffb00000-0xffbfffff could not be reserved system 00:0a: iomem range 0xfff00000-0xffffffff could not be reserved system 00:0b: ioport range 0x8000-0x802f has been reserved system 00:0b: ioport range 0x8100-0x811f has been reserved system 00:0b: iomem range 0xe0000000-0xefffffff could not be reserved system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved system 00:0c: iomem range 0xcf000-0xcffff has been reserved system 00:0c: iomem range 0x78000000-0x7fffffff could not be reserved system 00:0c: iomem range 0xfee00000-0xfee00fff could not be reserved PCI: Bridge: 0000:00:01.0 IO window: 6000-6fff MEM window: d4300000-d43fffff PREFETCH window: c0000000-c7ffffff PCI: Bridge: 0000:00:04.0 IO window: 4000-5fff MEM window: d0000000-d3ffffff PREFETCH window: disabled. PCI: Bridge: 0000:00:05.0 IO window: 2000-3fff MEM window: cc000000-cfffffff PREFETCH window: disabled. PCI: Bridge: 0000:00:06.0 IO window: disabled. MEM window: c8000000-c80fffff PREFETCH window: disabled. PCI: Bus 3, cardbus bridge: 0000:02:04.0 IO window: 00001000-000010ff IO window: 00001400-000014ff PREFETCH window: 8c000000-8fffffff MEM window: 90000000-93ffffff PCI: Bridge: 0000:00:14.4 IO window: disabled. MEM window: d4000000-d42fffff PREFETCH window: disabled. PCI: Setting latency timer of device 0000:00:04.0 to 64 PCI: Setting latency timer of device 0000:00:05.0 to 64 PCI: Setting latency timer of device 0000:00:06.0 to 64 ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 20 (level, low) -> IRQ 20 NET: Registered protocol family 2 Time: acpi_pm clocksource has been installed. Clockevents: could not switch to one-shot mode:<6>Clockevents: could not switch to one-shot mode: lapic is not functional. Could not switch to high resolution mode on CPU 1 lapic is not functional. Could not switch to high resolution mode on CPU 0 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 131072 (order: 9, 3145728 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 5282k freed audit: initializing netlink socket (disabled) audit(1192223582.968:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: MSI quirk detected. MSI deactivated. Boot video device is 0000:01:05.0 PCI: Setting latency timer of device 0000:00:04.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:04.0:pcie00] Allocate Port Service[0000:00:04.0:pcie01] Allocate Port Service[0000:00:04.0:pcie03] PCI: Setting latency timer of device 0000:00:05.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:05.0:pcie00] Allocate Port Service[0000:00:05.0:pcie01] Allocate Port Service[0000:00:05.0:pcie03] PCI: Setting latency timer of device 0000:00:06.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:06.0:pcie00] Allocate Port Service[0000:00:06.0:pcie01] Allocate Port Service[0000:00:06.0:pcie03] AER service couldn't init device 0000:00:04.0:pcie01 - no _OSC support AER service couldn't init device 0000:00:05.0:pcie01 - no _OSC support AER service couldn't init device 0000:00:06.0:pcie01 - no _OSC support vesafb: framebuffer at 0xc0000000, mapped to 0xffffc20010100000, using 4608k, total 16384k vesafb: mode is 1024x768x24, linelength=3072, pages=6 vesafb: scrolling: redraw vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 Linux agpgart interface v0.102 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled RAMDISK driver initialized: 16 RAM disks of 128000K size 1024 blocksize sata_sil 0000:00:12.0: version 2.3 ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 16 (level, low) -> IRQ 16 scsi0 : sata_sil scsi1 : sata_sil ata1: SATA max UDMA/100 mmio m512@0xd4409000 tf 0xd4409080 irq 16 ata2: SATA max UDMA/100 mmio m512@0xd4409000 tf 0xd44090c0 irq 16 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-7: FUJITSU MHV2080BH, 892C, max UDMA/100 ata1.00: 156301488 sectors, multi 16: LBA48 ata1.00: configured for UDMA/100 ata2: SATA link down (SStatus 0 SControl 300) scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2080B 892C PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 > sd 0:0:0:0: [sda] Attached SCSI disk PNP: PS/2 Controller [PNP0303:C214,PNP0f13:C215] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: PC Speaker as /class/input/input0 input: AT Translated Set 2 keyboard as /class/input/input1 NET: Registered protocol family 1 swsusp: Resume From Partition /dev/sda1 PM: Checking swsusp image. PM: Resume from disk failed. registered taskstats version 1 Magic number: 11:322:247 Freeing unused kernel memory: 252k freed Write protecting the kernel read-only data: 1124k sd 0:0:0:0: Attached scsi generic sg0 type 0 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ATIIXP: IDE controller (0x1002:0x4376 rev 0x80) at PCI slot 0000:00:14.1 ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16 ATIIXP: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x7040-0x7047, BIOS settings: hda:DMA, hdb:pio ATIIXP: simplex device: DMA disabled ide1: ATIIXP Bus-Master DMA disabled (BIOS) Probing IDE interface ide0... hda: HL-DT-ST DVDRAM GMA-4082N, ATAPI CD/DVD-ROM drive hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hda: selected mode 0x22 ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... BIOS EDD facility v0.16 2004-Jun-25, 6 devices found swsusp: Marking nosave pages: 000000000009f000 - 0000000000100000 swsusp: Basic memory bitmaps created swsusp: Basic memory bitmaps freed Attempting manual resume swsusp: Resume From Partition 8:1 PM: Checking swsusp image. PM: Resume from disk failed. kjournald starting. Commit interval 5 seconds EXT3 FS on sda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. ieee80211_crypt: registered algorithm 'NULL' ieee80211: 802.11 data/management/control stack, git-1.1.13 ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com> Floppy drive(s): fd0 is 1.44M bcm43xx driver ACPI: PCI Interrupt 0000:30:00.0[A] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:30:00.0 to 64 bcm43xx: Chip ID 0x4311, rev 0x1 bcm43xx: Number of cores: 4 bcm43xx: Core 0: ID 0x800, rev 0x11, vendor 0x4243 bcm43xx: Core 1: ID 0x812, rev 0xa, vendor 0x4243 bcm43xx: Core 2: ID 0x817, rev 0x3, vendor 0x4243 bcm43xx: Core 3: ID 0x820, rev 0x1, vendor 0x4243 bcm43xx: PHY connected bcm43xx: Detected PHY: Analog: 4, Type 2, Revision 8 bcm43xx: Detected Radio: ID: 2205017f (Manuf: 17f Ver: 2050 Rev: 2) bcm43xx: Radio initialized bcm43xx: Radio initialized ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16 sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman tg3.c:v3.82 (October 5, 2007) eth0 renamed to eth1 sysfs: duplicate filename 'eth1' can not be created WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/fs/sysfs/dir.c:416 sysfs_add_one() Call Trace: [<ffffffff802da54e>] sysfs_add_one+0x5c/0xc9 [<ffffffff802db415>] sysfs_create_link+0xd1/0x12c [<ffffffff80382e0a>] device_rename+0x17a/0x1db [<ffffffff803d6c9d>] dev_change_name+0x13c/0x234 [<ffffffff803d6f99>] dev_ifsioc+0x204/0x2d0 [<ffffffff803d7585>] dev_ioctl+0x520/0x633 [<ffffffff8027ef6a>] handle_mm_fault+0x1f6/0x6e5 [<ffffffff8030cb16>] __up_read+0x8f/0x97 [<ffffffff803c9d4d>] sock_ioctl+0x1fe/0x20c [<ffffffff802a0896>] do_ioctl+0x2a/0x77 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b [<ffffffff8020bfde>] system_call+0x7e/0x83 net eth1: device_rename: sysfs_create_symlink failed (-17) ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 23 (level, low) -> IRQ 23 eth0: Tigon3 [partno(BCM95788A50) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000Base-T Ethernet 00:17:08:2e:2e:f3 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1] eth0: dma_rwctrl[763f0000] dma_mask[32-bit] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device sdhci: SDHCI controller found at 0000:02:04.3 [104c:803c] (rev 0) ACPI: PCI Interrupt 0000:02:04.3[A] -> GSI 20 (level, low) -> IRQ 20 mmc0: SDHCI at 0xd4019000 irq 20 PIO usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ACPI: PCI Interrupt 0000:02:04.1[A] -> GSI 20 (level, low) -> IRQ 20 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[d4011000-d40117ff] Max Packet=[2048] IR/IT contexts=[4/8] ehci_hcd: block sizes: qh 160 qtd 96 itd 192 sitd 96 ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:13.2: EHCI Host Controller /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file 'devices' /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '001' ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:13.2: reset hcs_params 0x2408 dbg=0 cc=2 pcc=4 ordered !ppc ports=8 ehci_hcd 0000:00:13.2: reset hcc_params a012 thresh 1 uframes 256/512/1024 ehci_hcd 0000:00:13.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT ehci_hcd 0000:00:13.2: MWI active ehci_hcd 0000:00:13.2: irq 19, io mem 0xd4403000 ehci_hcd 0000:00:13.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT ehci_hcd 0000:00:13.2: init command 010009 (park)=0 ithresh=1 period=256 RUN ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: default language 0x0409 usb usb1: uevent usb usb1: usb_probe_device usb usb1: configuration #1 chosen from 1 choice usb usb1: adding 1-0:1.0 (config #1, interface 0) usb 1-0:1.0: uevent usb 1-0:1.0: uevent hub 1-0:1.0: usb_probe_interface hub 1-0:1.0: usb_probe_interface - got id hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected hub 1-0:1.0: standalone hub hub 1-0:1.0: no power switching (usb 1.0) hub 1-0:1.0: individual port over-current protection hub 1-0:1.0: Single TT hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns) hub 1-0:1.0: power on to power good time: 20ms hub 1-0:1.0: local power source is good hub 1-0:1.0: trying to enable port power on non-switchable hub hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, DMA Uniform CD-ROM driver Revision: 3.20 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd: block sizes: ed 80 td 96 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0000 /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '001' usb usb1: new device found, idVendor=0000, idProduct=0000 ehci_hcd 0000:00:13.2: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT hub 1-0:1.0: port 2, status 0501, change 0001, 480 Mb/s usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.23-mm1 ehci_hcd usb usb1: SerialNumber: 0000:00:13.2 hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x501 ACPI: PCI Interrupt 0000:02:04.2[A] -> GSI 20 (level, low) -> IRQ 20 Yenta: CardBus bridge found at 0000:02:04.0 [103c:30b0] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 19 Yenta: Enabling burst memory read transactions ohci_hcd 0000:00:13.0: OHCI Host Controller /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '002' ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:13.0: created debug files ohci_hcd 0000:00:13.0: irq 19, io mem 0xd4401000 Yenta: Using INTVAL to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:02:04.0, mfunc 0x01a11002, devctl 0x64 ehci_hcd 0000:00:13.2: port 2 full speed --> companion ehci_hcd 0000:00:13.2: GetStatus port 2 status 003801 POWER OWNER sig=j CONNECT hub 1-0:1.0: port 2 not reset yet, waiting 50ms ohci_hcd 0000:00:13.0: OHCI controller state ohci_hcd 0000:00:13.0: OHCI 1.0, NO legacy support registers ohci_hcd 0000:00:13.0: control 0x083 HCFS=operational CBSR=3 ohci_hcd 0000:00:13.0: cmdstatus 0x00000 SOC=0 ohci_hcd 0000:00:13.0: intrstatus 0x00000004 SF ohci_hcd 0000:00:13.0: intrenable 0x8000005a MIE RHSC UE RD WDH ohci_hcd 0000:00:13.0: hcca frame #0005 ohci_hcd 0000:00:13.0: roothub.a 02000204 POTPGT=2 NPS NDP=4(4) ohci_hcd 0000:00:13.0: roothub.b 00000000 PPCM=0000 DR=0000 ohci_hcd 0000:00:13.0: roothub.status 00008000 DRWE ohci_hcd 0000:00:13.0: roothub.portstatus [0] 0x00000100 PPS ohci_hcd 0000:00:13.0: roothub.portstatus [1] 0x00010100 CSC PPS ohci_hcd 0000:00:13.0: roothub.portstatus [2] 0x00000100 PPS ohci_hcd 0000:00:13.0: roothub.portstatus [3] 0x00000100 PPS usb usb2: default language 0x0409 usb usb2: uevent usb usb2: usb_probe_device usb usb2: configuration #1 chosen from 1 choice ehci_hcd 0000:00:13.2: GetStatus port 2 status 003002 POWER OWNER sig=se0 CSC ehci_hcd 0000:00:13.2: GetStatus port 3 status 001803 POWER sig=j CSC CONNECT hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s usb usb2: adding 2-0:1.0 (config #1, interface 0) usb 2-0:1.0: uevent usb 2-0:1.0: uevent hub 2-0:1.0: usb_probe_interface hub 2-0:1.0: usb_probe_interface - got id hub 2-0:1.0: USB hub found hub 2-0:1.0: 4 ports detected hub 2-0:1.0: standalone hub hub 2-0:1.0: no power switching (usb 1.0) hub 2-0:1.0: global over-current protection hub 2-0:1.0: power on to power good time: 4ms hub 2-0:1.0: local power source is good hub 2-0:1.0: no over-current condition exists hub 2-0:1.0: trying to enable port power on non-switchable hub rtc_cmos: probe of 00:07 failed with error -16 hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x501 Yenta: ISA IRQ mask 0x0eb8, PCI irq 20 ehci_hcd 0000:00:13.2: port 3 full speed --> companion ehci_hcd 0000:00:13.2: GetStatus port 3 status 003801 POWER OWNER sig=j CONNECT hub 1-0:1.0: port 3 not reset yet, waiting 50ms Socket status: 30000006 /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '001' usb usb2: new device found, idVendor=0000, idProduct=0000 usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: OHCI Host Controller usb usb2: Manufacturer: Linux 2.6.23-mm1 ohci_hcd usb usb2: SerialNumber: 0000:00:13.0 ehci_hcd 0000:00:13.2: GetStatus port 3 status 003002 POWER OWNER sig=se0 CSC ehci_hcd 0000:00:13.2: GetStatus port 6 status 001403 POWER sig=k CSC CONNECT hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06 hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501 ehci_hcd 0000:00:13.2: port 6 low speed --> companion pcmcia: parent PCI bridge Memory window: 0xd4000000 - 0xd42fffff shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 19 ohci_hcd 0000:00:13.1: OHCI Host Controller ehci_hcd 0000:00:13.2: GetStatus port 6 status 003002 POWER OWNER sig=se0 CSC hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0040 hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0004 ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [1] = 0x00010101 CSC PPS CCS hub 2-0:1.0: port 2, status 0101, change 0001, 12 Mb/s /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '003' ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:13.1: created debug files ohci_hcd 0000:00:13.1: irq 19, io mem 0xd4402000 hub 2-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101 ohci_hcd 0000:00:13.1: OHCI controller state ohci_hcd 0000:00:13.1: OHCI 1.0, NO legacy support registers ohci_hcd 0000:00:13.1: control 0x083 HCFS=operational CBSR=3 ohci_hcd 0000:00:13.1: cmdstatus 0x00000 SOC=0 ohci_hcd 0000:00:13.1: intrstatus 0x00000004 SF ohci_hcd 0000:00:13.1: intrenable 0x8000005a MIE RHSC UE RD WDH ohci_hcd 0000:00:13.1: hcca frame #0005 ohci_hcd 0000:00:13.1: roothub.a 02000204 POTPGT=2 NPS NDP=4(4) ohci_hcd 0000:00:13.1: roothub.b 00000000 PPCM=0000 DR=0000 ohci_hcd 0000:00:13.1: roothub.status 00008000 DRWE ohci_hcd 0000:00:13.1: roothub.portstatus [0] 0x00010100 CSC PPS ohci_hcd 0000:00:13.1: roothub.portstatus [1] 0x00000100 PPS ohci_hcd 0000:00:13.1: roothub.portstatus [2] 0x00010100 CSC PPS ohci_hcd 0000:00:13.1: roothub.portstatus [3] 0x00000100 PPS usb usb3: default language 0x0409 usb usb3: uevent usb usb3: usb_probe_device usb usb3: configuration #1 chosen from 1 choice usb usb3: adding 3-0:1.0 (config #1, interface 0) usb 3-0:1.0: uevent usb 3-0:1.0: uevent hub 3-0:1.0: usb_probe_interface hub 3-0:1.0: usb_probe_interface - got id hub 3-0:1.0: USB hub found hub 3-0:1.0: 4 ports detected hub 3-0:1.0: standalone hub hub 3-0:1.0: no power switching (usb 1.0) hub 3-0:1.0: global over-current protection hub 3-0:1.0: power on to power good time: 4ms hub 3-0:1.0: local power source is good hub 3-0:1.0: no over-current condition exists hub 3-0:1.0: trying to enable port power on non-switchable hub ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f9929613f0c] usb 2-2: new full speed USB device using ohci_hcd and address 2 /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '001' usb usb3: new device found, idVendor=0000, idProduct=0000 usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: OHCI Host Controller usb usb3: Manufacturer: Linux 2.6.23-mm1 ohci_hcd usb usb3: SerialNumber: 0000:00:13.1 ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS usb 2-2: skipped 1 descriptor after interface usb 2-2: default language 0x0409 usb 2-2: uevent usb 2-2: usb_probe_device usb 2-2: configuration #1 chosen from 1 choice usb 2-2: adding 2-2:1.0 (config #1, interface 0) usb 2-2:1.0: uevent usb 2-2:1.0: uevent usb 2-2: adding 2-2:1.1 (config #1, interface 1) usb 2-2:1.1: uevent usb 2-2:1.1: uevent usb 2-2: adding 2-2:1.2 (config #1, interface 2) usb 2-2:1.2: uevent usb 2-2:1.2: uevent usb 2-2: adding 2-2:1.3 (config #1, interface 3) usb 2-2:1.3: uevent usb 2-2:1.3: uevent /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '002' usb 2-2: new device found, idVendor=03f0, idProduct=171d usb 2-2: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-2: Product: HP Integrated Module usb 2-2: Manufacturer: Broadcom Corp floppy0: no floppy controllers found hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0044 ehci_hcd 0000:00:13.2: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT hub 1-0:1.0: port 2, status 0501, change 0001, 480 Mb/s Bluetooth: Core ver 2.11 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x501 Bluetooth: HCI USB driver ver 2.9 ehci_hcd 0000:00:13.2: port 2 full speed --> companion ehci_hcd 0000:00:13.2: GetStatus port 2 status 003801 POWER OWNER sig=j CONNECT hub 1-0:1.0: port 2 not reset yet, waiting 50ms ehci_hcd 0000:00:13.2: GetStatus port 2 status 003002 POWER OWNER sig=se0 CSC ehci_hcd 0000:00:13.2: GetStatus port 6 status 001403 POWER sig=k CSC CONNECT hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501 ehci_hcd 0000:00:13.2: port 6 low speed --> companion ehci_hcd 0000:00:13.2: GetStatus port 6 status 003002 POWER OWNER sig=se0 CSC hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0004 hub 3-0:1.0: state 7 ports 4 chg 0000 evt 000a ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [0] = 0x00010101 CSC PPS CCS hci_usb 2-2:1.0: usb_probe_interface hci_usb 2-2:1.0: usb_probe_interface - got id hub 3-0:1.0: port 1, status 0101, change 0001, 12 Mb/s hci_usb 2-2:1.2: usb_probe_interface hci_usb 2-2:1.2: usb_probe_interface - got id hci_usb 2-2:1.3: usb_probe_interface hci_usb 2-2:1.3: usb_probe_interface - got id usbcore: registered new interface driver hci_usb hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized usb 3-1: new full speed USB device using ohci_hcd and address 2 Bluetooth: HIDP (Human Interface Emulation) ver 1.2 ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS Bluetooth: RFCOMM socket layer initialized usb 3-1: ep0 maxpacket = 8 Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.8 usb 3-1: default language 0x0409 usb 3-1: uevent usb 3-1: usb_probe_device usb 3-1: configuration #1 chosen from 1 choice usb 3-1: adding 3-1:1.0 (config #1, interface 0) usb 3-1:1.0: uevent usb 3-1:1.0: uevent /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '002' usb 3-1: new device found, idVendor=08ff, idProduct=2580 usb 3-1: new device strings: Mfr=0, Product=1, SerialNumber=0 usb 3-1: Product: Fingerprint Sensor ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [2] = 0x00010301 CSC LSDA PPS CCS hub 3-0:1.0: port 3, status 0301, change 0001, 1.5 Mb/s hub 3-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x301 ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [2] = 0x00100303 PRSC LSDA PPS PES CCS usb 3-3: new low speed USB device using ohci_hcd and address 3 ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [2] = 0x00100303 PRSC LSDA PPS PES CCS usb 3-3: skipped 1 descriptor after interface usb 3-3: skipped 1 descriptor after interface usb 3-3: default language 0x0409 usb 3-3: uevent usb 3-3: usb_probe_device usb 3-3: configuration #1 chosen from 1 choice usb 3-3: adding 3-3:1.0 (config #1, interface 0) usb 3-3:1.0: uevent usb 3-3:1.0: uevent usb 3-3: adding 3-3:1.1 (config #1, interface 1) usb 3-3:1.1: uevent usb 3-3:1.1: uevent /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '003' usb 3-3: new device found, idVendor=046d, idProduct=c521 usb 3-3: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-3: Product: USB Receiver usb 3-3: Manufacturer: Logitech hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0040 hub 3-0:1.0: state 7 ports 4 chg 0000 evt 0000 usbcore: registered new interface driver hiddev usbhid 3-3:1.0: usb_probe_interface usbhid 3-3:1.0: usb_probe_interface - got id input: Logitech USB Receiver as /class/input/input2 input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:13.1-3 usbhid 3-3:1.1: usb_probe_interface usbhid 3-3:1.1: usb_probe_interface - got id input: Logitech USB Receiver as /class/input/input3 /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/file.c: looking for a minor, starting at 96 input,hiddev96: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:13.1-3 usbcore: registered new interface driver usbhid /home/rafael/src/mm/linux-2.6.23-mm1/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04793/0x300000 serio: Synaptics pass-through port at isa0060/serio4/input0 input: SynPS/2 Synaptics TouchPad as /class/input/input4 device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com hub 1-0:1.0: hub_suspend usb usb1: bus auto-suspend ehci_hcd 0000:00:13.2: suspend root hub loop: module loaded kjournald starting. Commit interval 5 seconds EXT3 FS on sda2, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda7, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda8, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda5, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda6, internal journal EXT3-fs: mounted filesystem with ordered data mode. Floppy drive(s): fd0 is 1.44M floppy0: no floppy controllers found Adding 1052216k swap on /dev/sda1. Priority:-1 extents:1 across:1052216k NET: Registered protocol family 10 lo: Disabled Privacy Extensions ip6_tables: (C) 2000-2006 Netfilter Core Team ip_tables: (C) 2000-2006 Netfilter Core Team nf_conntrack version 0.5.0 (16384 buckets, 65536 max) ACPI: AC Adapter [C1BD] (on-line) ACPI: Battery Slot [C1BF] (battery present) ACPI: Battery Slot [C1BE] (battery absent) input: Power Button (FF) as /class/input/input5 ACPI: Power Button (FF) [PWRF] input: Sleep Button (CM) as /class/input/input6 ACPI: Sleep Button (CM) [C25A] input: Lid Switch as /class/input/input7 ACPI: Lid Switch [C25B] ACPI: Transitioning device [C34F] to D3 ACPI: Transitioning device [C34F] to D3 ACPI: Fan [C34F] (off) ACPI: Transitioning device [C350] to D3 ACPI: Transitioning device [C350] to D3 ACPI: Fan [C350] (off) ACPI: Transitioning device [C351] to D3 ACPI: Transitioning device [C351] to D3 ACPI: Fan [C351] (off) ACPI: Transitioning device [C352] to D3 ACPI: Transitioning device [C352] to D3 ACPI: Fan [C352] (off) ACPI: Processor [C000] (supports 8 throttling states) ACPI: Processor [C001] (supports 8 throttling states) ACPI: Thermal Zone [TZ1] (62 C) ACPI: Thermal Zone [TZ2] (52 C) ACPI: Thermal Zone [TZ3] (32 C) powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-60 processors (2 cpu cores) (version 2.00.00) powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x13 powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x15 powernow-k8: 2 : fid 0x8 (1600 MHz), vid 0x17 powernow-k8: 3 : fid 0x0 (800 MHz), vid 0x1e powernow-k8: ph2 null fid transition 0xc mtrr: no more MTRRs available APIC error on CPU1: 00(40) APIC error on CPU0: 00(40) WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() Call Trace: [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 [<ffffffff8024ee6d>] update_target+0x71/0x76 [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2 [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 [<ffffffff80270cbe>] find_lock_page+0x2a/0xa6 [<ffffffff80272bce>] filemap_fault+0x1d3/0x35b [<ffffffff80270bab>] unlock_page+0x2d/0x31 [<ffffffff8027d6ec>] __do_fault+0x38e/0x3c4 [<ffffffff8027ef6a>] handle_mm_fault+0x1f6/0x6e5 [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a [<ffffffff8024e56b>] up_read+0x9/0xb [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 [<ffffffff802a0896>] do_ioctl+0x2a/0x77 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b [<ffffffff8020bfde>] system_call+0x7e/0x83 hda-intel: Invalid position buffer, using LPIB read method instead. WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() Call Trace: [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 [<ffffffff8024ee6d>] update_target+0x71/0x76 [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0 [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 [<ffffffff8022f18e>] default_wake_function+0x0/0xf [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 [<ffffffff80282e91>] vma_link+0xdd/0x10b [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 [<ffffffff802a0896>] do_ioctl+0x2a/0x77 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b [<ffffffff8020bfde>] system_call+0x7e/0x83 WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() Call Trace: [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 [<ffffffff8024ee6d>] update_target+0x71/0x76 [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2 [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 [<ffffffff8022f18e>] default_wake_function+0x0/0xf [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 [<ffffffff80282e91>] vma_link+0xdd/0x10b [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 [<ffffffff802a0896>] do_ioctl+0x2a/0x77 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b [<ffffffff8020bfde>] system_call+0x7e/0x83 WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() Call Trace: [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 [<ffffffff8024ee6d>] update_target+0x71/0x76 [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0 [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 [<ffffffff8022f18e>] default_wake_function+0x0/0xf [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 [<ffffffff80282e91>] vma_link+0xdd/0x10b [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 [<ffffffff802a0896>] do_ioctl+0x2a/0x77 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b [<ffffffff8020bfde>] system_call+0x7e/0x83 WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() Call Trace: [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 [<ffffffff8024ee6d>] update_target+0x71/0x76 [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2 [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 [<ffffffff8022f18e>] default_wake_function+0x0/0xf [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 [<ffffffff80282e91>] vma_link+0xdd/0x10b [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 [<ffffffff802a0896>] do_ioctl+0x2a/0x77 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b [<ffffffff8020bfde>] system_call+0x7e/0x83 ACPI: PCI interrupt for device 0000:30:00.0 disabled bcm43xx driver ACPI: PCI Interrupt 0000:30:00.0[A] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:30:00.0 to 64 bcm43xx: Chip ID 0x4311, rev 0x1 bcm43xx: Number of cores: 4 bcm43xx: Core 0: ID 0x800, rev 0x11, vendor 0x4243 bcm43xx: Core 1: ID 0x812, rev 0xa, vendor 0x4243 bcm43xx: Core 2: ID 0x817, rev 0x3, vendor 0x4243 bcm43xx: Core 3: ID 0x820, rev 0x1, vendor 0x4243 bcm43xx: PHY connected bcm43xx: Detected PHY: Analog: 4, Type 2, Revision 8 bcm43xx: Detected Radio: ID: 2205017f (Manuf: 17f Ver: 2050 Rev: 2) bcm43xx: Radio initialized bcm43xx: Radio initialized bcm43xx: PHY connected bcm43xx: Microcode rev 0x127, pl 0xe (2005-04-18 02:36:27) bcm43xx: Radio turned on bcm43xx: Radio enabled by hardware bcm43xx: Chip initialized bcm43xx: 32-bit DMA initialized bcm43xx: Keys cleared bcm43xx: Selected 802.11 core (phytype 2) ADDRCONF(NETDEV_UP): eth1: link is not ready SoftMAC: Scanning finished: scanned 13 channels starting with channel 1 SoftMAC: Associate: Scanning for networks first. SoftMAC: Scanning finished: scanned 13 channels starting with channel 1 SoftMAC: Queueing Authentication Request to 00:17:9a:f3:b5:75 SoftMAC: Cannot associate without being authenticated, requested authentication SoftMAC: Sent Authentication Request to 00:17:9a:f3:b5:75. SoftMAC: Open Authentication completed with 00:17:9a:f3:b5:75 SoftMAC: sent association request! SoftMAC: associated! ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready SFW2-OUT-ERROR IN= OUT=eth1 SRC=0000:0000:0000:0000:0000:0000:0000:0000 DST=ff02:0000:0000:0000:0000:0000:0000:0016 LEN=76 TC=0 HOPLIMIT=1 FLOWLBL=0 OPT ( ) PROTO=ICMPv6 TYPE=143 CODE=0 SoftMAC: Getting essid from req_essid SFW2-OUT-ERROR IN= OUT=eth1 SRC=0000:0000:0000:0000:0000:0000:0000:0000 DST=ff02:0000:0000:0000:0000:0001:ffbe:9531 LEN=64 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=ICMPv6 TYPE=135 CODE=0 NET: Registered protocol family 17 SoftMAC: Getting essid from req_essid SFW2-OUT-ERROR IN= OUT=eth1 SRC=fe80:0000:0000:0000:0214:a5ff:febe:9531 DST=ff02:0000:0000:0000:0000:0000:0000:0002 LEN=56 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=ICMPv6 TYPE=133 CODE=0 SoftMAC: Getting essid from req_essid SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:17:9a:f3:b5:75:08:00 SRC=62.121.83.254 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=7883 PROTO=2 SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SFW2-OUT-ERROR IN= OUT=eth1 SRC=fe80:0000:0000:0000:0214:a5ff:febe:9531 DST=ff02:0000:0000:0000:0000:0000:0000:0002 LEN=56 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=ICMPv6 TYPE=133 CODE=0 SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SFW2-OUT-ERROR IN= OUT=eth1 SRC=fe80:0000:0000:0000:0214:a5ff:febe:9531 DST=ff02:0000:0000:0000:0000:0000:0000:0002 LEN=56 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=ICMPv6 TYPE=133 CODE=0 SFW2-OUT-ERROR IN= OUT=eth1 SRC=fe80:0000:0000:0000:0214:a5ff:febe:9531 DST=ff02:0000:0000:0000:0000:0000:0000:0016 LEN=76 TC=0 HOPLIMIT=1 FLOWLBL=0 OPT ( ) PROTO=ICMPv6 TYPE=143 CODE=0 SoftMAC: Getting essid from req_essid eth1: no IPv6 routers present SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid bcm43xx: Radio initialized bcm43xx: DMA-32 0x0200 (RX) max used slots: 1/64 bcm43xx: DMA-32 0x02A0 (TX) max used slots: 0/512 bcm43xx: DMA-32 0x0280 (TX) max used slots: 0/512 bcm43xx: DMA-32 0x0260 (TX) max used slots: 0/512 bcm43xx: DMA-32 0x0240 (TX) max used slots: 0/512 bcm43xx: DMA-32 0x0220 (TX) max used slots: 2/512 bcm43xx: DMA-32 0x0200 (TX) max used slots: 0/512 ACPI: PCI interrupt for device 0000:30:00.0 disabled Syncing filesystems ... done. PM: Preparing system for mem sleep Freezing user space processes ... (elapsed 0.00 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. PM: Entering mem sleep Suspending device vcsa10 Suspending device vcs10 Suspending device vcsa4 Suspending device vcs4 Suspending device vcsa2 Suspending device vcs2 Suspending device vcsa6 Suspending device vcs6 Suspending device vcsa5 Suspending device vcs5 Suspending device vcsa3 Suspending device vcs3 Suspending device vcsa7 Suspending device vcs7 Suspending device audio Suspending device dsp Suspending device mixer Suspending device event7 Suspending device input7 Suspending device event6 Suspending device input6 Suspending device event5 Suspending device input5 Suspending device seq Suspending device C1BE Suspending device C1BF Suspending device C1BD Suspending device device-mapper Suspending device serio5 Suspending device event4 Suspending device mouse1 Suspending device input4 Suspending device hiddev0 Suspending device event3 Suspending device input3 Suspending device event2 Suspending device mouse0 Suspending device input2 Suspending device usbdev3.3 Suspending device usbdev3.3_ep82 Suspending device 3-3:1.1 Suspending device usbdev3.3_ep81 Suspending device 3-3:1.0 Suspending device usbdev3.3_ep00 Suspending device 3-3 usb 3-3: usb suspend Suspending device usbdev3.2 Suspending device usbdev3.2_ep02 Suspending device usbdev3.2_ep81 Suspending device 3-1:1.0 Suspending device usbdev3.2_ep00 Suspending device 3-1 usb 3-1: usb suspend Suspending device hci0 Suspending device usbdev2.2_ep03 Suspending device usbdev2.2_ep83 Suspending device bluetooth Suspending device usbdev2.2 Suspending device 2-2:1.3 Suspending device usbdev2.2_ep04 Suspending device usbdev2.2_ep84 Suspending device 2-2:1.2 Suspending device 2-2:1.1 Suspending device usbdev2.2_ep02 Suspending device usbdev2.2_ep82 Suspending device usbdev2.2_ep81 Suspending device 2-2:1.0 Suspending device usbdev2.2_ep00 Suspending device 2-2 usb 2-2: usb suspend Suspending device usbdev3.1 Suspending device usbdev3.1_ep81 Suspending device 00023f9929613f0c Suspending device 00023f9929613f0c Suspending device 3-0:1.0 Suspending device usbdev3.1_ep00 Suspending device usb3 hub 3-0:1.0: hub_suspend usb usb3: bus suspend ohci_hcd 0000:00:13.1: suspend root hub Suspending device pcmcia_socket0 Suspending device usbdev2.1 Suspending device usbdev2.1_ep81 Suspending device 2-0:1.0 Suspending device usbdev2.1_ep00 Suspending device usb2 hub 2-0:1.0: hub_suspend usb usb2: bus suspend ohci_hcd 0000:00:13.0: suspend root hub Suspending device hwmon0 Suspending device usbdev1.1 Suspending device usbdev1.1_ep81 Suspending device 1-0:1.0 Suspending device usbdev1.1_ep00 Suspending device usb1 Suspending device fw-host0 Suspending device fw-host0 Suspending device mmc0 Suspending device i2c-0 Suspending device eth0 Suspending device controlC0 Suspending device hwC0D0 Suspending device hwC0D1 Suspending device pcmC0D0c Suspending device pcmC0D0p Suspending device timer Suspending device vcsa1 Suspending device vcs1 Suspending device 0.0 Suspending device ide0 Suspending device network_throughput Suspending device network_latency Suspending device cpu_dma_latency Suspending device event1 Suspending device event0 Suspending device input1 Suspending device input0 Suspending device psaux Suspending device mice Suspending device serio4 Suspending device serio3 Suspending device serio2 Suspending device serio1 Suspending device serio0 Suspending device i8042 Suspending device 0:0:0:0 sd 0:0:0:0: [sda] Synchronizing SCSI cache sd 0:0:0:0: [sda] Stopping disk Suspending device target0:0:0 Suspending device host1 Suspending device host0 Suspending device ttyS3 Suspending device ttyS2 Suspending device ttyS1 Suspending device ttyS0 Suspending device serial8250 Suspending device nvram Suspending device hpet Suspending device rtc Suspending device ttysf Suspending device ttyse Suspending device ttysd Suspending device ttysc Suspending device ttysb Suspending device ttysa Suspending device ttys9 Suspending device ttys8 Suspending device ttys7 Suspending device ttys6 Suspending device ttys5 Suspending device ttys4 Suspending device ttys3 Suspending device ttys2 Suspending device ttys1 Suspending device ttys0 Suspending device ttyrf Suspending device ttyre Suspending device ttyrd Suspending device ttyrc Suspending device ttyrb Suspending device ttyra Suspending device ttyr9 Suspending device ttyr8 Suspending device ttyr7 Suspending device ttyr6 Suspending device ttyr5 Suspending device ttyr4 Suspending device ttyr3 Suspending device ttyr2 Suspending device ttyr1 Suspending device ttyr0 Suspending device ttyqf Suspending device ttyqe Suspending device ttyqd Suspending device ttyqc Suspending device ttyqb Suspending device ttyqa Suspending device ttyq9 Suspending device ttyq8 Suspending device ttyq7 Suspending device ttyq6 Suspending device ttyq5 Suspending device ttyq4 Suspending device ttyq3 Suspending device ttyq2 Suspending device ttyq1 Suspending device ttyq0 Suspending device ttypf Suspending device ttype Suspending device ttypd Suspending device ttypc Suspending device ttypb Suspending device ttypa Suspending device ttyp9 Suspending device ttyp8 Suspending device ttyp7 Suspending device ttyp6 Suspending device ttyp5 Suspending device ttyp4 Suspending device ttyp3 Suspending device ttyp2 Suspending device ttyp1 Suspending device ttyp0 Suspending device ptysf Suspending device ptyse Suspending device ptysd Suspending device ptysc Suspending device ptysb Suspending device ptysa Suspending device ptys9 Suspending device ptys8 Suspending device ptys7 Suspending device ptys6 Suspending device ptys5 Suspending device ptys4 Suspending device ptys3 Suspending device ptys2 Suspending device ptys1 Suspending device ptys0 Suspending device ptyrf Suspending device ptyre Suspending device ptyrd Suspending device ptyrc Suspending device ptyrb Suspending device ptyra Suspending device ptyr9 Suspending device ptyr8 Suspending device ptyr7 Suspending device ptyr6 Suspending device ptyr5 Suspending device ptyr4 Suspending device ptyr3 Suspending device ptyr2 Suspending device ptyr1 Suspending device ptyr0 Suspending device ptyqf Suspending device ptyqe Suspending device ptyqd Suspending device ptyqc Suspending device ptyqb Suspending device ptyqa Suspending device ptyq9 Suspending device ptyq8 Suspending device ptyq7 Suspending device ptyq6 Suspending device ptyq5 Suspending device ptyq4 Suspending device ptyq3 Suspending device ptyq2 Suspending device ptyq1 Suspending device ptyq0 Suspending device ptypf Suspending device ptype Suspending device ptypd Suspending device ptypc Suspending device ptypb Suspending device ptypa Suspending device ptyp9 Suspending device ptyp8 Suspending device ptyp7 Suspending device ptyp6 Suspending device ptyp5 Suspending device ptyp4 Suspending device ptyp3 Suspending device ptyp2 Suspending device ptyp1 Suspending device ptyp0 Suspending device tty63 Suspending device tty62 Suspending device tty61 Suspending device tty60 Suspending device tty59 Suspending device tty58 Suspending device tty57 Suspending device tty56 Suspending device tty55 Suspending device tty54 Suspending device tty53 Suspending device tty52 Suspending device tty51 Suspending device tty50 Suspending device tty49 Suspending device tty48 Suspending device tty47 Suspending device tty46 Suspending device tty45 Suspending device tty44 Suspending device tty43 Suspending device tty42 Suspending device tty41 Suspending device tty40 Suspending device tty39 Suspending device tty38 Suspending device tty37 Suspending device tty36 Suspending device tty35 Suspending device tty34 Suspending device tty33 Suspending device tty32 Suspending device tty31 Suspending device tty30 Suspending device tty29 Suspending device tty28 Suspending device tty27 Suspending device tty26 Suspending device tty25 Suspending device tty24 Suspending device tty23 Suspending device tty22 Suspending device tty21 Suspending device tty20 Suspending device tty19 Suspending device tty18 Suspending device tty17 Suspending device tty16 Suspending device tty15 Suspending device tty14 Suspending device tty13 Suspending device tty12 Suspending device tty11 Suspending device tty10 Suspending device tty9 Suspending device tty8 Suspending device tty7 Suspending device tty6 Suspending device tty5 Suspending device tty4 Suspending device tty3 Suspending device tty2 Suspending device tty1 Suspending device vcsa Suspending device vcs Suspending device tty0 Suspending device ptmx Suspending device console Suspending device tty Suspending device vtcon1 Suspending device fb0 Suspending device vesafb.0 Suspending device fbcon Suspending device 0000:00:06.0:pcie03 Suspending device 0000:00:06.0:pcie01 Suspending device 0000:00:06.0:pcie00 Suspending device 0000:00:05.0:pcie03 Suspending device 0000:00:05.0:pcie01 Suspending device 0000:00:05.0:pcie00 Suspending device 0000:00:04.0:pcie03 Suspending device 0000:00:04.0:pcie01 Suspending device 0000:00:04.0:pcie00 Suspending device snapshot Suspending device pcspkr Suspending device mcelog Suspending device lo Suspending device kmsg Suspending device urandom Suspending device random Suspending device full Suspending device zero Suspending device port Suspending device null Suspending device kmem Suspending device mem Suspending device 00:0c ACPI handle has no context! Suspending device 00:0b Suspending device 00:0a Suspending device 00:09 Suspending device 00:08 Suspending device 00:07 Suspending device 00:06 Suspending device 00:05 Suspending device 00:04 Suspending device 00:03 Suspending device 00:02 Suspending device 00:01 Suspending device 00:00 Suspending device pnp0 Suspending device 0000:02 Suspending device 0000:03 Suspending device 0000:02:04.3 ACPI handle has no context! ACPI: PCI interrupt for device 0000:02:04.3 disabled ACPI handle has no context! Suspending device 0000:02:04.2 ACPI handle has no context! ACPI: PCI interrupt for device 0000:02:04.2 disabled ACPI handle has no context! Suspending device 0000:02:04.1 ACPI handle has no context! Suspending device 0000:02:04.0 Suspending device 0000:02:01.0 Suspending device 0000:30 Suspending device 0000:30:00.0 Suspending device 0000:20 Suspending device 0000:10 Suspending device 0000:01 Suspending device 0000:01:05.0 Suspending device 0000:00:18.3 Suspending device 0000:00:18.2 Suspending device 0000:00:18.1 Suspending device 0000:00:18.0 Suspending device 0000:00:14.4 Suspending device 0000:00:14.3 Suspending device 0000:00:14.2 ACPI: PCI interrupt for device 0000:00:14.2 disabled Suspending device 0000:00:14.1 Suspending device 0000:00:14.0 Suspending device 0000:00:13.2 ACPI: PCI interrupt for device 0000:00:13.2 disabled ehci_hcd 0000:00:13.2: --> PCI D3 Suspending device 0000:00:13.1 ACPI: PCI interrupt for device 0000:00:13.1 disabled ohci_hcd 0000:00:13.1: --> PCI D0/legacy Suspending device 0000:00:13.0 ACPI: PCI interrupt for device 0000:00:13.0 disabled ohci_hcd 0000:00:13.0: --> PCI D0/legacy Suspending device 0000:00:12.0 ACPI: PCI interrupt for device 0000:00:12.0 disabled Suspending device 0000:00:06.0 Suspending device 0000:00:05.0 Suspending device 0000:00:04.0 Suspending device 0000:00:01.0 Suspending device 0000:00:00.0 Suspending device 0000:00 Suspending device pci0000:00 Suspending device LNXTHERM:03 Suspending device LNXTHERM:02 Suspending device LNXTHERM:01 Suspending device PNP0C0B:03 Suspending device PNP0C0B:02 ACPI: Transitioning device [C351] to D0 ACPI: Transitioning device [C351] to D0 Suspending device PNP0C0B:01 ACPI: Transitioning device [C350] to D0 ACPI: Transitioning device [C350] to D0 Suspending device PNP0C0B:00 ACPI: Transitioning device [C34F] to D0 ACPI: Transitioning device [C34F] to D0 Suspending device LNXPOWER:06 Suspending device LNXPOWER:05 Suspending device LNXPOWER:04 Suspending device LNXPOWER:03 Suspending device LNXTHERM:00 Suspending device PNP0C02:02 Suspending device PNP0C14:00 Suspending device PNP0C0D:00 Suspending device PNP0C0E:00 Suspending device ACPI0003:00 Suspending device PNP0C0A:01 Suspending device PNP0C0A:00 Suspending device HPQ0006:00 Suspending device PNP0C02:01 Suspending device device:49 Suspending device device:48 Suspending device device:47 Suspending device device:46 Suspending device device:45 Suspending device device:44 Suspending device device:43 Suspending device device:42 Suspending device device:41 Suspending device device:40 Suspending device device:3f Suspending device device:3e Suspending device device:3d Suspending device device:3c Suspending device device:3b Suspending device device:3a Suspending device device:39 Suspending device device:38 Suspending device device:37 Suspending device device:36 Suspending device device:35 Suspending device device:34 Suspending device device:33 Suspending device PNP0C0F:07 Suspending device PNP0C0F:06 Suspending device PNP0C0F:05 Suspending device PNP0C0F:04 Suspending device PNP0C0F:03 Suspending device PNP0C0F:02 Suspending device PNP0C0F:01 Suspending device PNP0C0F:00 Suspending device device:32 Suspending device device:31 Suspending device device:30 Suspending device device:2f Suspending device device:2e Suspending device device:2d Suspending device device:2c Suspending device device:2b Suspending device device:2a Suspending device device:29 Suspending device device:28 Suspending device device:27 Suspending device device:26 Suspending device device:25 Suspending device device:24 Suspending device device:23 Suspending device device:22 Suspending device device:21 Suspending device device:20 Suspending device device:1f Suspending device device:1e Suspending device device:1d Suspending device device:1c Suspending device device:1b Suspending device device:1a Suspending device device:19 Suspending device device:18 Suspending device device:17 Suspending device device:16 Suspending device device:15 Suspending device device:14 Suspending device device:13 Suspending device device:12 Suspending device device:11 Suspending device device:10 Suspending device PNP0C02:00 Suspending device PNP0000:00 Suspending device LNXPOWER:02 Suspending device SYN0118:00 Suspending device PNP0303:00 Suspending device PNP0B00:00 Suspending device PNP0800:00 Suspending device PNP0200:00 Suspending device PNP0100:00 Suspending device PNP0C04:00 Suspending device IFX0102:00 Suspending device LNXPOWER:01 Suspending device PNP0401:00 Suspending device PNP0A06:00 Suspending device PNP0C09:00 Suspending device device:0f Suspending device device:0e Suspending device LNXPOWER:00 Suspending device device:0d Suspending device device:0c Suspending device device:0b Suspending device device:0a Suspending device device:09 Suspending device device:08 Suspending device device:07 Suspending device device:06 Suspending device device:05 Suspending device device:04 Suspending device device:03 Suspending device device:02 Suspending device LNXVIDEO:00 Suspending device device:01 Suspending device PNP0A03:00 Suspending device PNP0C01:00 Suspending device device:00 Suspending device ACPI0007:01 Suspending device ACPI0007:00 Suspending device LNXPWRBN:00 Suspending device LNXSYSTM:00 Suspending device id Suspending device vtcon0 Suspending device platform Disabling non-boot CPUs ... CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. Cannot set affinity for irq 0 CPU 1 is now offline SMP alternatives: switching to UP code CPU0 attaching NULL sched-domain. CPU1 is down Extended CMOS year: 2000 hwsleep-0317 [00] enter_sleep_state : Entering sleep state [S3] Back to C! WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:427 smp_call_function_single() Call Trace: [<ffffffff8022ecc6>] task_rq_lock+0x3d/0x6f [<ffffffff8021b51b>] smp_call_function_single+0x52/0xa0 [<ffffffff80232f59>] set_cpus_allowed+0xbf/0xcc [<ffffffff80214c61>] sc_freq_event+0x71/0x75 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 [<ffffffff803c1b1d>] cpufreq_resume+0x131/0x157 [<ffffffff80383128>] __sysdev_resume+0x34/0x4a [<ffffffff8038366e>] sysdev_resume+0x1f/0x61 [<ffffffff80388050>] device_power_up+0x9/0x10 [<ffffffff8025bba4>] suspend_devices_and_enter+0xbf/0xf7 [<ffffffff8025bd3f>] enter_state+0x163/0x1e5 [<ffffffff8025be65>] state_store+0xa4/0xc2 [<ffffffff802d98a1>] subsys_attr_store+0x31/0x33 [<ffffffff802d9ccd>] sysfs_write_file+0xe0/0x11c [<ffffffff80294d07>] vfs_write+0xc7/0x150 [<ffffffff80295288>] sys_write+0x47/0x70 [<ffffffff8020bfde>] system_call+0x7e/0x83 Extended CMOS year: 2000 Enabling non-boot CPUs ... CPU0 attaching NULL sched-domain. SMP alternatives: switching to SMP code Booting processor 1/2 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 3990.28 BogoMIPS (lpj=7980574) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping 02 Machine check events logged CPU0 attaching sched-domain: domain 0: span 00000000,00000000,00000000,00000003 groups: 00000000,00000000,00000000,00000001 00000000,00000000,00000000,00000002 CPU1 attaching sched-domain: domain 0: span 00000000,00000000,00000000,00000003 groups: 00000000,00000000,00000000,00000002 00000000,00000000,00000000,00000001 CPU1 is up Clockevents: could not switch to one-shot mode: lapic is not functional. Could not switch to high resolution mode on CPU 1 ACPI: Transitioning device [C34F] to D3 ACPI: Transitioning device [C34F] to D3 ACPI: Transitioning device [C350] to D3 ACPI: Transitioning device [C350] to D3 ACPI: Transitioning device [C351] to D3 ACPI: Transitioning device [C351] to D3 PM: Writing back config space on device 0000:00:01.0 at offset 7 (was 22206161, writing 2206161) PM: Writing back config space on device 0000:00:04.0 at offset 9 (was 10001, writing 1fff1) PM: Writing back config space on device 0000:00:04.0 at offset 8 (was 0, writing d3f0d000) PM: Writing back config space on device 0000:00:04.0 at offset 7 (was 101, writing 5141) PM: Writing back config space on device 0000:00:04.0 at offset 3 (was 10000, writing 10010) PM: Writing back config space on device 0000:00:04.0 at offset 1 (was 100000, writing 100007) PCI: Setting latency timer of device 0000:00:04.0 to 64 PM: Writing back config space on device 0000:00:05.0 at offset 9 (was 10001, writing 1fff1) PM: Writing back config space on device 0000:00:05.0 at offset 8 (was 0, writing cff0cc00) PM: Writing back config space on device 0000:00:05.0 at offset 7 (was 101, writing 3121) PM: Writing back config space on device 0000:00:05.0 at offset 3 (was 10000, writing 10010) PM: Writing back config space on device 0000:00:05.0 at offset 1 (was 100000, writing 100007) PCI: Setting latency timer of device 0000:00:05.0 to 64 PM: Writing back config space on device 0000:00:06.0 at offset 9 (was 10001, writing 1fff1) PM: Writing back config space on device 0000:00:06.0 at offset 8 (was 0, writing c800c800) PM: Writing back config space on device 0000:00:06.0 at offset 7 (was 101, writing 1f1) PM: Writing back config space on device 0000:00:06.0 at offset 3 (was 10000, writing 10010) PM: Writing back config space on device 0000:00:06.0 at offset 1 (was 100000, writing 100007) PCI: Setting latency timer of device 0000:00:06.0 to 64 PM: Writing back config space on device 0000:00:12.0 at offset f (was 100, writing 10a) PM: Writing back config space on device 0000:00:12.0 at offset 3 (was 0, writing 4010) ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 16 (level, low) -> IRQ 16 ohci_hcd 0000:00:13.0: PCI legacy resume PCI: Enabling device 0000:00:13.0 (0000 -> 0002) ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:13.0 to 64 PM: Writing back config space on device 0000:00:13.0 at offset f (was 100, writing 10b) PM: Writing back config space on device 0000:00:13.0 at offset 4 (was 0, writing d4401000) PM: Writing back config space on device 0000:00:13.0 at offset 3 (was 804000, writing 804010) PM: Writing back config space on device 0000:00:13.0 at offset 1 (was 2b00006, writing 2b00007) ohci_hcd 0000:00:13.1: PCI legacy resume PCI: Enabling device 0000:00:13.1 (0000 -> 0002) ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:13.1 to 64 PM: Writing back config space on device 0000:00:13.1 at offset f (was 100, writing 10b) PM: Writing back config space on device 0000:00:13.1 at offset 4 (was 0, writing d4402000) PM: Writing back config space on device 0000:00:13.1 at offset 1 (was 2b00006, writing 2b00007) ehci_hcd 0000:00:13.2: PCI D0, from previous PCI D3 ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:13.2 to 64 PM: Writing back config space on device 0000:00:13.2 at offset f (was 100, writing 10b) ehci_hcd 0000:00:13.2: lost power, restarting usb usb1: root hub lost power or was reset ehci_hcd 0000:00:13.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT ehci_hcd 0000:00:13.2: MWI active PM: Writing back config space on device 0000:00:14.1 at offset f (was 100, writing 10a) PM: Writing back config space on device 0000:00:14.1 at offset 8 (was 1, writing 7041) PM: Writing back config space on device 0000:00:14.1 at offset 3 (was 0, writing 4010) PM: Writing back config space on device 0000:00:14.1 at offset 1 (was 2300000, writing 2300005) ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16 PM: Writing back config space on device 0000:00:14.2 at offset f (was 10a, writing a) PM: Writing back config space on device 0000:00:14.2 at offset 1 (was 4100000, writing 4100002) ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16 PM: Writing back config space on device 0000:00:14.4 at offset 3 (was 816000, writing 814000) PM: Writing back config space on device 0000:30:00.0 at offset f (was 100, writing 10a) PM: Writing back config space on device 0000:30:00.0 at offset 4 (was 0, writing c8000000) PM: Writing back config space on device 0000:30:00.0 at offset 3 (was 0, writing 10) PM: Writing back config space on device 0000:30:00.0 at offset 1 (was 100000, writing 100003) PM: Writing back config space on device 0000:02:01.0 at offset 3 (was 0, writing 4010) PM: Writing back config space on device 0000:02:01.0 at offset 1 (was 2b00000, writing 2b00006) PM: Writing back config space on device 0000:02:04.0 at offset f (was 34001ff, writing 5c0010a) PM: Writing back config space on device 0000:02:04.0 at offset e (was 0, writing 14fc) PM: Writing back config space on device 0000:02:04.0 at offset d (was 0, writing 1400) PM: Writing back config space on device 0000:02:04.0 at offset c (was 0, writing 10fc) PM: Writing back config space on device 0000:02:04.0 at offset b (was 0, writing 1000) PM: Writing back config space on device 0000:02:04.0 at offset a (was 0, writing 93fff000) PM: Writing back config space on device 0000:02:04.0 at offset 9 (was 0, writing 90000000) PM: Writing back config space on device 0000:02:04.0 at offset 8 (was 0, writing 8ffff000) PM: Writing back config space on device 0000:02:04.0 at offset 7 (was 0, writing 8c000000) PM: Writing back config space on device 0000:02:04.0 at offset 6 (was 0, writing b0060302) PM: Writing back config space on device 0000:02:04.0 at offset 4 (was 0, writing d4010000) PM: Writing back config space on device 0000:02:04.0 at offset 3 (was 820000, writing 82a810) PM: Writing back config space on device 0000:02:04.0 at offset 1 (was 2100000, writing 2100007) PM: Writing back config space on device 0000:02:04.1 at offset f (was 4020100, writing 402010a) PM: Writing back config space on device 0000:02:04.1 at offset 5 (was 0, writing d4014000) PM: Writing back config space on device 0000:02:04.1 at offset 4 (was 0, writing d4011000) PM: Writing back config space on device 0000:02:04.1 at offset 3 (was 800000, writing 804010) PM: Writing back config space on device 0000:02:04.1 at offset 1 (was 2100000, writing 2100006) ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[d4011000-d40117ff] Max Packet=[2048] IR/IT contexts=[4/8] PM: Writing back config space on device 0000:02:04.2 at offset f (was 40701ff, writing 407010a) PM: Writing back config space on device 0000:02:04.2 at offset 4 (was 0, writing d4018000) PM: Writing back config space on device 0000:02:04.2 at offset 3 (was 800000, writing 804010) PM: Writing back config space on device 0000:02:04.2 at offset 1 (was 2100000, writing 2100006) ACPI: PCI Interrupt 0000:02:04.2[A] -> GSI 20 (level, low) -> IRQ 20 PM: Writing back config space on device 0000:02:04.3 at offset f (was 40701ff, writing 407010a) PM: Writing back config space on device 0000:02:04.3 at offset 4 (was 0, writing d4019000) PM: Writing back config space on device 0000:02:04.3 at offset 3 (was 800000, writing 804010) PM: Writing back config space on device 0000:02:04.3 at offset 1 (was 2100000, writing 2100006) ACPI: PCI Interrupt 0000:02:04.3[A] -> GSI 20 (level, low) -> IRQ 20 sd 0:0:0:0: [sda] Starting disk ata2: SATA link down (SStatus 0 SControl 300) ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: configured for UDMA/100 sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hda: selected mode 0x22 usb usb1: usb resume ehci_hcd 0000:00:13.2: resume root hub after power loss hub 1-0:1.0: trying to enable port power on non-switchable hub usb usb2: usb resume ohci_hcd 0000:00:13.0: lost power ohci_hcd 0000:00:13.0: OHCI controller state ohci_hcd 0000:00:13.0: OHCI 1.0, NO legacy support registers ohci_hcd 0000:00:13.0: control 0x083 HCFS=operational CBSR=3 ohci_hcd 0000:00:13.0: cmdstatus 0x00000 SOC=0 ohci_hcd 0000:00:13.0: intrstatus 0x00000004 SF ohci_hcd 0000:00:13.0: intrenable 0x8000005a MIE RHSC UE RD WDH ohci_hcd 0000:00:13.0: hcca frame #0005 ohci_hcd 0000:00:13.0: roothub.a 02000204 POTPGT=2 NPS NDP=4(4) ohci_hcd 0000:00:13.0: roothub.b 00000000 PPCM=0000 DR=0000 ohci_hcd 0000:00:13.0: roothub.status 00008000 DRWE ohci_hcd 0000:00:13.0: roothub.portstatus [0] 0x00000100 PPS ohci_hcd 0000:00:13.0: roothub.portstatus [1] 0x00000100 PPS ohci_hcd 0000:00:13.0: roothub.portstatus [2] 0x00000100 PPS ohci_hcd 0000:00:13.0: roothub.portstatus [3] 0x00000100 PPS ohci_hcd 0000:00:13.0: restart complete usb usb2: root hub lost power or was reset hub 2-0:1.0: trying to enable port power on non-switchable hub hub 2-0:1.0: logical disconnect on port 2 usb usb3: usb resume ohci_hcd 0000:00:13.1: lost power ohci_hcd 0000:00:13.1: OHCI controller state ohci_hcd 0000:00:13.1: OHCI 1.0, NO legacy support registers ohci_hcd 0000:00:13.1: control 0x083 HCFS=operational CBSR=3 ohci_hcd 0000:00:13.1: cmdstatus 0x00000 SOC=0 ohci_hcd 0000:00:13.1: intrstatus 0x00000004 SF ohci_hcd 0000:00:13.1: intrenable 0x8000005a MIE RHSC UE RD WDH ohci_hcd 0000:00:13.1: hcca frame #000b ohci_hcd 0000:00:13.1: roothub.a 02000204 POTPGT=2 NPS NDP=4(4) ohci_hcd 0000:00:13.1: roothub.b 00000000 PPCM=0000 DR=0000 ohci_hcd 0000:00:13.1: roothub.status 00008000 DRWE ohci_hcd 0000:00:13.1: roothub.portstatus [0] 0x00000100 PPS ohci_hcd 0000:00:13.1: roothub.portstatus [1] 0x00000100 PPS ohci_hcd 0000:00:13.1: roothub.portstatus [2] 0x00000100 PPS ohci_hcd 0000:00:13.1: roothub.portstatus [3] 0x00000100 PPS ohci_hcd 0000:00:13.1: restart complete usb usb3: root hub lost power or was reset hub 3-0:1.0: trying to enable port power on non-switchable hub hub 3-0:1.0: logical disconnect on port 1 hub 3-0:1.0: logical disconnect on port 3 PM: Finishing wakeup. Restarting tasks ... done. hub 1-0:1.0: state 7 ports 8 chg 0000 evt 004c ehci_hcd 0000:00:13.2: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT hub 1-0:1.0: port 2, status 0501, change 0001, 480 Mb/s hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x501 ehci_hcd 0000:00:13.2: port 2 full speed --> companion ehci_hcd 0000:00:13.2: GetStatus port 2 status 003801 POWER OWNER sig=j CONNECT hub 1-0:1.0: port 2 not reset yet, waiting 50ms ehci_hcd 0000:00:13.2: GetStatus port 2 status 003002 POWER OWNER sig=se0 CSC ehci_hcd 0000:00:13.2: GetStatus port 3 status 001803 POWER sig=j CSC CONNECT hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x501 ehci_hcd 0000:00:13.2: port 3 full speed --> companion ehci_hcd 0000:00:13.2: GetStatus port 3 status 003801 POWER OWNER sig=j CONNECT hub 1-0:1.0: port 3 not reset yet, waiting 50ms ehci_hcd 0000:00:13.2: GetStatus port 3 status 003002 POWER OWNER sig=se0 CSC ehci_hcd 0000:00:13.2: GetStatus port 6 status 001403 POWER sig=k CSC CONNECT hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501 ehci_hcd 0000:00:13.2: port 6 low speed --> companion ehci_hcd 0000:00:13.2: GetStatus port 6 status 003002 POWER OWNER sig=se0 CSC hub 2-0:1.0: state 7 ports 4 chg 0004 evt 0004 ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [1] = 0x00010101 CSC PPS CCS hub 2-0:1.0: port 2, status 0101, change 0001, 12 Mb/s usb 2-2: USB disconnect, address 2 usb 2-2: unregistering device usb 2-2: usb_disable_device nuking all URBs usb 2-2: unregistering interface 2-2:1.0 usb 2-2:1.0: uevent usb 2-2:1.0: uevent usb 2-2: unregistering interface 2-2:1.1 usb 2-2:1.1: uevent usb 2-2:1.1: uevent usb 2-2: unregistering interface 2-2:1.2 usb 2-2:1.2: uevent usb 2-2:1.2: uevent usb 2-2: unregistering interface 2-2:1.3 usb 2-2:1.3: uevent usb 2-2:1.3: uevent usb 2-2: uevent hub 2-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101 ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS usb 2-2: new full speed USB device using ohci_hcd and address 3 ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS usb 2-2: skipped 1 descriptor after interface usb 2-2: default language 0x0409 usb 2-2: uevent usb 2-2: usb_probe_device usb 2-2: configuration #1 chosen from 1 choice usb 2-2: adding 2-2:1.0 (config #1, interface 0) usb 2-2:1.0: uevent usb 2-2:1.0: uevent hci_usb 2-2:1.0: usb_probe_interface hci_usb 2-2:1.0: usb_probe_interface - got id usb 2-2: adding 2-2:1.1 (config #1, interface 1) usb 2-2:1.1: uevent usb 2-2:1.1: uevent usb 2-2: adding 2-2:1.2 (config #1, interface 2) usb 2-2:1.2: uevent usb 2-2:1.2: uevent hci_usb 2-2:1.2: usb_probe_interface hci_usb 2-2:1.2: usb_probe_interface - got id usb 2-2: adding 2-2:1.3 (config #1, interface 3) usb 2-2:1.3: uevent usb 2-2:1.3: uevent hci_usb 2-2:1.3: usb_probe_interface hci_usb 2-2:1.3: usb_probe_interface - got id /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '003' usb 2-2: new device found, idVendor=03f0, idProduct=171d usb 2-2: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-2: Product: HP Integrated Module usb 2-2: Manufacturer: Broadcom Corp hub 3-0:1.0: state 7 ports 4 chg 000a evt 000a ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [0] = 0x00010101 CSC PPS CCS hub 3-0:1.0: port 1, status 0101, change 0001, 12 Mb/s usb 3-1: USB disconnect, address 2 usb 3-1: unregistering device usb 3-1: usb_disable_device nuking all URBs usb 3-1: unregistering interface 3-1:1.0 usb 3-1:1.0: uevent usb 3-1:1.0: uevent usb 3-1: uevent hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS usb 3-1: new full speed USB device using ohci_hcd and address 4 ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS usb 3-1: ep0 maxpacket = 8 usb 3-1: default language 0x0409 usb 3-1: uevent usb 3-1: usb_probe_device usb 3-1: configuration #1 chosen from 1 choice usb 3-1: adding 3-1:1.0 (config #1, interface 0) usb 3-1:1.0: uevent usb 3-1:1.0: uevent /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '004' usb 3-1: new device found, idVendor=08ff, idProduct=2580 usb 3-1: new device strings: Mfr=0, Product=1, SerialNumber=0 usb 3-1: Product: Fingerprint Sensor ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [2] = 0x00010301 CSC LSDA PPS CCS hub 3-0:1.0: port 3, status 0301, change 0001, 1.5 Mb/s usb 3-3: USB disconnect, address 3 usb 3-3: unregistering device usb 3-3: usb_disable_device nuking all URBs usb 3-3: unregistering interface 3-3:1.0 usb 3-3:1.0: uevent usb 3-3:1.0: uevent usb 3-3: unregistering interface 3-3:1.1 /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/file.c: removing 96 minor usb 3-3:1.1: uevent usb 3-3:1.1: uevent usb 3-3: uevent hub 3-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x301 ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [2] = 0x00100303 PRSC LSDA PPS PES CCS usb 3-3: new low speed USB device using ohci_hcd and address 5 ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [2] = 0x00100303 PRSC LSDA PPS PES CCS usb 3-3: skipped 1 descriptor after interface usb 3-3: skipped 1 descriptor after interface usb 3-3: default language 0x0409 usb 3-3: uevent usb 3-3: usb_probe_device usb 3-3: configuration #1 chosen from 1 choice usb 3-3: adding 3-3:1.0 (config #1, interface 0) usb 3-3:1.0: uevent usb 3-3:1.0: uevent usbhid 3-3:1.0: usb_probe_interface usbhid 3-3:1.0: usb_probe_interface - got id input: Logitech USB Receiver as /class/input/input8 input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:13.1-3 usb 3-3: adding 3-3:1.1 (config #1, interface 1) usb 3-3:1.1: uevent usb 3-3:1.1: uevent usbhid 3-3:1.1: usb_probe_interface usbhid 3-3:1.1: usb_probe_interface - got id input: Logitech USB Receiver as /class/input/input9 /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/file.c: looking for a minor, starting at 96 input,hiddev96: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:13.1-3 /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '005' usb 3-3: new device found, idVendor=046d, idProduct=c521 usb 3-3: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-3: Product: USB Receiver usb 3-3: Manufacturer: Logitech hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0040 hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0004 hub 3-0:1.0: state 7 ports 4 chg 0000 evt 0008 hub 1-0:1.0: hub_suspend usb usb1: bus auto-suspend ehci_hcd 0000:00:13.2: suspend root hub bcm43xx driver ACPI: PCI Interrupt 0000:30:00.0[A] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:30:00.0 to 64 bcm43xx: Chip ID 0x4311, rev 0x1 bcm43xx: Number of cores: 4 bcm43xx: Core 0: ID 0x800, rev 0x11, vendor 0x4243 bcm43xx: Core 1: ID 0x812, rev 0xa, vendor 0x4243 bcm43xx: Core 2: ID 0x817, rev 0x3, vendor 0x4243 bcm43xx: Core 3: ID 0x820, rev 0x1, vendor 0x4243 bcm43xx: PHY connected bcm43xx: Detected PHY: Analog: 4, Type 2, Revision 8 bcm43xx: Detected Radio: ID: 2205017f (Manuf: 17f Ver: 2050 Rev: 2) bcm43xx: Radio initialized bcm43xx: Radio initialized bcm43xx: PHY connected bcm43xx: Microcode rev 0x127, pl 0xe (2005-04-18 02:36:27) bcm43xx: Radio turned on bcm43xx: Radio enabled by hardware bcm43xx: Chip initialized bcm43xx: 32-bit DMA initialized bcm43xx: Keys cleared bcm43xx: Selected 802.11 core (phytype 2) ADDRCONF(NETDEV_UP): eth1: link is not ready SoftMAC: Scanning finished: scanned 13 channels starting with channel 1 SoftMAC: Associate: Scanning for networks first. SoftMAC: Scanning finished: scanned 13 channels starting with channel 1 SoftMAC: Queueing Authentication Request to 00:17:9a:f3:b5:75 SoftMAC: Cannot associate without being authenticated, requested authentication SoftMAC: Sent Authentication Request to 00:17:9a:f3:b5:75. SoftMAC: Open Authentication completed with 00:17:9a:f3:b5:75 SoftMAC: sent association request! SoftMAC: associated! ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready SFW2-OUT-ERROR IN= OUT=eth1 SRC=0000:0000:0000:0000:0000:0000:0000:0000 DST=ff02:0000:0000:0000:0000:0000:0000:0016 LEN=76 TC=0 HOPLIMIT=1 FLOWLBL=0 OPT ( ) PROTO=ICMPv6 TYPE=143 CODE=0 SoftMAC: Getting essid from req_essid SFW2-OUT-ERROR IN= OUT=eth1 SRC=0000:0000:0000:0000:0000:0000:0000:0000 DST=ff02:0000:0000:0000:0000:0001:ffbe:9531 LEN=64 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=ICMPv6 TYPE=135 CODE=0 SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SFW2-OUT-ERROR IN= OUT=eth1 SRC=fe80:0000:0000:0000:0214:a5ff:febe:9531 DST=ff02:0000:0000:0000:0000:0000:0000:0002 LEN=56 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=ICMPv6 TYPE=133 CODE=0 SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SFW2-OUT-ERROR IN= OUT=eth1 SRC=fe80:0000:0000:0000:0214:a5ff:febe:9531 DST=ff02:0000:0000:0000:0000:0000:0000:0002 LEN=56 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=ICMPv6 TYPE=133 CODE=0 SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SFW2-OUT-ERROR IN= OUT=eth1 SRC=fe80:0000:0000:0000:0214:a5ff:febe:9531 DST=ff02:0000:0000:0000:0000:0000:0000:0016 LEN=76 TC=0 HOPLIMIT=1 FLOWLBL=0 OPT ( ) PROTO=ICMPv6 TYPE=143 CODE=0 SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SFW2-OUT-ERROR IN= OUT=eth1 SRC=fe80:0000:0000:0000:0214:a5ff:febe:9531 DST=ff02:0000:0000:0000:0000:0000:0000:0002 LEN=56 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=ICMPv6 TYPE=133 CODE=0 SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid eth1: no IPv6 routers present WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() Call Trace: [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 [<ffffffff8024ee6d>] update_target+0x71/0x76 [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0 [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 [<ffffffff80282e91>] vma_link+0xdd/0x10b [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 [<ffffffff802a0896>] do_ioctl+0x2a/0x77 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b [<ffffffff8020bfde>] system_call+0x7e/0x83 WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() Call Trace: [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 [<ffffffff8024ee6d>] update_target+0x71/0x76 [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2 [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 [<ffffffff80282e91>] vma_link+0xdd/0x10b [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 [<ffffffff802a0896>] do_ioctl+0x2a/0x77 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b [<ffffffff8020bfde>] system_call+0x7e/0x83 SoftMAC: Getting essid from req_essid WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() Call Trace: [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 [<ffffffff8024ee6d>] update_target+0x71/0x76 [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0 [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 [<ffffffff8022f18e>] default_wake_function+0x0/0xf [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 [<ffffffff80282e91>] vma_link+0xdd/0x10b [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 [<ffffffff802a0896>] do_ioctl+0x2a/0x77 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b [<ffffffff8020bfde>] system_call+0x7e/0x83 WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() Call Trace: [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 [<ffffffff8024ee6d>] update_target+0x71/0x76 [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2 [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 [<ffffffff8022f18e>] default_wake_function+0x0/0xf [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 [<ffffffff80282e91>] vma_link+0xdd/0x10b [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 [<ffffffff802a0896>] do_ioctl+0x2a/0x77 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b [<ffffffff8020bfde>] system_call+0x7e/0x83 SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() Call Trace: [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 [<ffffffff8024ee6d>] update_target+0x71/0x76 [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0 [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 [<ffffffff8022f18e>] default_wake_function+0x0/0xf [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 [<ffffffff80282e91>] vma_link+0xdd/0x10b [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 [<ffffffff802a0896>] do_ioctl+0x2a/0x77 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b [<ffffffff8020bfde>] system_call+0x7e/0x83 WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() Call Trace: [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 [<ffffffff8024ee6d>] update_target+0x71/0x76 [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2 [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 [<ffffffff8022f18e>] default_wake_function+0x0/0xf [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 [<ffffffff80282e91>] vma_link+0xdd/0x10b [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 [<ffffffff802a0896>] do_ioctl+0x2a/0x77 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b [<ffffffff8020bfde>] system_call+0x7e/0x83 SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() Call Trace: [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 [<ffffffff8024ee6d>] update_target+0x71/0x76 [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0 [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 [<ffffffff8022f18e>] default_wake_function+0x0/0xf [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 [<ffffffff80282e91>] vma_link+0xdd/0x10b [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 [<ffffffff802a0896>] do_ioctl+0x2a/0x77 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b [<ffffffff8020bfde>] system_call+0x7e/0x83 WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() Call Trace: [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 [<ffffffff8024ee6d>] update_target+0x71/0x76 [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2 [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 [<ffffffff8022f18e>] default_wake_function+0x0/0xf [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 [<ffffffff80282e91>] vma_link+0xdd/0x10b [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 [<ffffffff802a0896>] do_ioctl+0x2a/0x77 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b [<ffffffff8020bfde>] system_call+0x7e/0x83 SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid bcm43xx: Radio initialized bcm43xx: DMA-32 0x0200 (RX) max used slots: 1/64 bcm43xx: DMA-32 0x02A0 (TX) max used slots: 0/512 bcm43xx: DMA-32 0x0280 (TX) max used slots: 0/512 bcm43xx: DMA-32 0x0260 (TX) max used slots: 0/512 bcm43xx: DMA-32 0x0240 (TX) max used slots: 0/512 bcm43xx: DMA-32 0x0220 (TX) max used slots: 2/512 bcm43xx: DMA-32 0x0200 (TX) max used slots: 0/512 ACPI: PCI interrupt for device 0000:30:00.0 disabled swsusp: Marking nosave pages: 000000000009f000 - 0000000000100000 swsusp: Basic memory bitmaps created Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.00 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.19 seconds) done. Shrinking memory... \b-\b\\bdone (15072 pages freed) Freed 60288 kbytes in 0.22 seconds (274.03 MB/s) Suspending device vcsa8 Suspending device vcs8 Suspending device vcsa10 Suspending device vcs10 Suspending device usbdev3.5 Suspending device usbdev3.5_ep82 Suspending device hiddev0 Suspending device event3 Suspending device input9 Suspending device 3-3:1.1 Suspending device usbdev3.5_ep81 Suspending device event2 Suspending device mouse0 Suspending device input8 Suspending device 3-3:1.0 Suspending device usbdev3.5_ep00 Suspending device 3-3 Suspending device usbdev3.4 Suspending device usbdev3.4_ep02 Suspending device usbdev3.4_ep81 Suspending device 3-1:1.0 Suspending device usbdev3.4_ep00 Suspending device 3-1 Suspending device usbdev2.3 Suspending device 2-2:1.3 Suspending device usbdev2.3_ep04 Suspending device usbdev2.3_ep84 Suspending device 2-2:1.2 Suspending device usbdev2.3_ep03 Suspending device usbdev2.3_ep83 Suspending device 2-2:1.1 Suspending device usbdev2.3_ep02 Suspending device usbdev2.3_ep82 Suspending device usbdev2.3_ep81 Suspending device hci0 Suspending device 2-2:1.0 Suspending device usbdev2.3_ep00 Suspending device 2-2 Suspending device vcsa4 Suspending device vcs4 Suspending device vcsa2 Suspending device vcs2 Suspending device vcsa6 Suspending device vcs6 Suspending device vcsa5 Suspending device vcs5 Suspending device vcsa3 Suspending device vcs3 Suspending device vcsa7 Suspending device vcs7 Suspending device audio Suspending device dsp Suspending device mixer Suspending device event7 Suspending device input7 Suspending device event6 Suspending device input6 Suspending device event5 Suspending device input5 Suspending device seq Suspending device C1BE Suspending device C1BF Suspending device C1BD Suspending device device-mapper Suspending device serio5 Suspending device event4 Suspending device mouse1 Suspending device input4 Suspending device bluetooth Suspending device usbdev3.1 Suspending device usbdev3.1_ep81 Suspending device 00023f9929613f0c Suspending device 00023f9929613f0c Suspending device 3-0:1.0 Suspending device usbdev3.1_ep00 Suspending device usb3 hub 3-0:1.0: hub_suspend usb usb3: bus suspend ohci_hcd 0000:00:13.1: suspend root hub Suspending device pcmcia_socket0 Suspending device usbdev2.1 Suspending device usbdev2.1_ep81 Suspending device 2-0:1.0 Suspending device usbdev2.1_ep00 Suspending device usb2 hub 2-0:1.0: hub_suspend usb usb2: bus suspend ohci_hcd 0000:00:13.0: suspend root hub Suspending device hwmon0 Suspending device usbdev1.1 Suspending device usbdev1.1_ep81 Suspending device 1-0:1.0 Suspending device usbdev1.1_ep00 Suspending device usb1 Suspending device fw-host0 Suspending device fw-host0 Suspending device mmc0 Suspending device i2c-0 Suspending device eth0 Suspending device controlC0 Suspending device hwC0D0 Suspending device hwC0D1 Suspending device pcmC0D0c Suspending device pcmC0D0p Suspending device timer Suspending device vcsa1 Suspending device vcs1 Suspending device 0.0 Suspending device ide0 Suspending device network_throughput Suspending device network_latency Suspending device cpu_dma_latency Suspending device event1 Suspending device event0 Suspending device input1 Suspending device input0 Suspending device psaux Suspending device mice Suspending device serio4 Suspending device serio3 Suspending device serio2 Suspending device serio1 Suspending device serio0 Suspending device i8042 Suspending device 0:0:0:0 sd 0:0:0:0: [sda] Synchronizing SCSI cache Suspending device target0:0:0 Suspending device host1 Suspending device host0 Suspending device ttyS3 Suspending device ttyS2 Suspending device ttyS1 Suspending device ttyS0 Suspending device serial8250 Suspending device nvram Suspending device hpet Suspending device rtc Suspending device ttysf Suspending device ttyse Suspending device ttysd Suspending device ttysc Suspending device ttysb Suspending device ttysa Suspending device ttys9 Suspending device ttys8 Suspending device ttys7 Suspending device ttys6 Suspending device ttys5 Suspending device ttys4 Suspending device ttys3 Suspending device ttys2 Suspending device ttys1 Suspending device ttys0 Suspending device ttyrf Suspending device ttyre Suspending device ttyrd Suspending device ttyrc Suspending device ttyrb Suspending device ttyra Suspending device ttyr9 Suspending device ttyr8 Suspending device ttyr7 Suspending device ttyr6 Suspending device ttyr5 Suspending device ttyr4 Suspending device ttyr3 Suspending device ttyr2 Suspending device ttyr1 Suspending device ttyr0 Suspending device ttyqf Suspending device ttyqe Suspending device ttyqd Suspending device ttyqc Suspending device ttyqb Suspending device ttyqa Suspending device ttyq9 Suspending device ttyq8 Suspending device ttyq7 Suspending device ttyq6 Suspending device ttyq5 Suspending device ttyq4 Suspending device ttyq3 Suspending device ttyq2 Suspending device ttyq1 Suspending device ttyq0 Suspending device ttypf Suspending device ttype Suspending device ttypd Suspending device ttypc Suspending device ttypb Suspending device ttypa Suspending device ttyp9 Suspending device ttyp8 Suspending device ttyp7 Suspending device ttyp6 Suspending device ttyp5 Suspending device ttyp4 Suspending device ttyp3 Suspending device ttyp2 Suspending device ttyp1 Suspending device ttyp0 Suspending device ptysf Suspending device ptyse Suspending device ptysd Suspending device ptysc Suspending device ptysb Suspending device ptysa Suspending device ptys9 Suspending device ptys8 Suspending device ptys7 Suspending device ptys6 Suspending device ptys5 Suspending device ptys4 Suspending device ptys3 Suspending device ptys2 Suspending device ptys1 Suspending device ptys0 Suspending device ptyrf Suspending device ptyre Suspending device ptyrd Suspending device ptyrc Suspending device ptyrb Suspending device ptyra Suspending device ptyr9 Suspending device ptyr8 Suspending device ptyr7 Suspending device ptyr6 Suspending device ptyr5 Suspending device ptyr4 Suspending device ptyr3 Suspending device ptyr2 Suspending device ptyr1 Suspending device ptyr0 Suspending device ptyqf Suspending device ptyqe Suspending device ptyqd Suspending device ptyqc Suspending device ptyqb Suspending device ptyqa Suspending device ptyq9 Suspending device ptyq8 Suspending device ptyq7 Suspending device ptyq6 Suspending device ptyq5 Suspending device ptyq4 Suspending device ptyq3 Suspending device ptyq2 Suspending device ptyq1 Suspending device ptyq0 Suspending device ptypf Suspending device ptype Suspending device ptypd Suspending device ptypc Suspending device ptypb Suspending device ptypa Suspending device ptyp9 Suspending device ptyp8 Suspending device ptyp7 Suspending device ptyp6 Suspending device ptyp5 Suspending device ptyp4 Suspending device ptyp3 Suspending device ptyp2 Suspending device ptyp1 Suspending device ptyp0 Suspending device tty63 Suspending device tty62 Suspending device tty61 Suspending device tty60 Suspending device tty59 Suspending device tty58 Suspending device tty57 Suspending device tty56 Suspending device tty55 Suspending device tty54 Suspending device tty53 Suspending device tty52 Suspending device tty51 Suspending device tty50 Suspending device tty49 Suspending device tty48 Suspending device tty47 Suspending device tty46 Suspending device tty45 Suspending device tty44 Suspending device tty43 Suspending device tty42 Suspending device tty41 Suspending device tty40 Suspending device tty39 Suspending device tty38 Suspending device tty37 Suspending device tty36 Suspending device tty35 Suspending device tty34 Suspending device tty33 Suspending device tty32 Suspending device tty31 Suspending device tty30 Suspending device tty29 Suspending device tty28 Suspending device tty27 Suspending device tty26 Suspending device tty25 Suspending device tty24 Suspending device tty23 Suspending device tty22 Suspending device tty21 Suspending device tty20 Suspending device tty19 Suspending device tty18 Suspending device tty17 Suspending device tty16 Suspending device tty15 Suspending device tty14 Suspending device tty13 Suspending device tty12 Suspending device tty11 Suspending device tty10 Suspending device tty9 Suspending device tty8 Suspending device tty7 Suspending device tty6 Suspending device tty5 Suspending device tty4 Suspending device tty3 Suspending device tty2 Suspending device tty1 Suspending device vcsa Suspending device vcs Suspending device tty0 Suspending device ptmx Suspending device console Suspending device tty Suspending device vtcon1 Suspending device fb0 Suspending device vesafb.0 Suspending device fbcon Suspending device 0000:00:06.0:pcie03 Suspending device 0000:00:06.0:pcie01 Suspending device 0000:00:06.0:pcie00 Suspending device 0000:00:05.0:pcie03 Suspending device 0000:00:05.0:pcie01 Suspending device 0000:00:05.0:pcie00 Suspending device 0000:00:04.0:pcie03 Suspending device 0000:00:04.0:pcie01 Suspending device 0000:00:04.0:pcie00 Suspending device snapshot Suspending device pcspkr Suspending device mcelog Suspending device lo Suspending device kmsg Suspending device urandom Suspending device random Suspending device full Suspending device zero Suspending device port Suspending device null Suspending device kmem Suspending device mem Suspending device 00:0c ACPI handle has no context! Suspending device 00:0b Suspending device 00:0a Suspending device 00:09 Suspending device 00:08 Suspending device 00:07 Suspending device 00:06 Suspending device 00:05 Suspending device 00:04 Suspending device 00:03 Suspending device 00:02 Suspending device 00:01 Suspending device 00:00 Suspending device pnp0 Suspending device 0000:02 Suspending device 0000:03 Suspending device 0000:02:04.3 ACPI handle has no context! ACPI: PCI interrupt for device 0000:02:04.3 disabled ACPI handle has no context! Suspending device 0000:02:04.2 ACPI handle has no context! ACPI: PCI interrupt for device 0000:02:04.2 disabled ACPI handle has no context! Suspending device 0000:02:04.1 ACPI handle has no context! Suspending device 0000:02:04.0 Suspending device 0000:02:01.0 Suspending device 0000:30 Suspending device 0000:30:00.0 Suspending device 0000:20 Suspending device 0000:10 Suspending device 0000:01 Suspending device 0000:01:05.0 Suspending device 0000:00:18.3 Suspending device 0000:00:18.2 Suspending device 0000:00:18.1 Suspending device 0000:00:18.0 Suspending device 0000:00:14.4 Suspending device 0000:00:14.3 Suspending device 0000:00:14.2 ACPI: PCI interrupt for device 0000:00:14.2 disabled Suspending device 0000:00:14.1 Suspending device 0000:00:14.0 Suspending device 0000:00:13.2 ACPI: PCI interrupt for device 0000:00:13.2 disabled ehci_hcd 0000:00:13.2: --> PCI D3 Suspending device 0000:00:13.1 ACPI: PCI interrupt for device 0000:00:13.1 disabled ohci_hcd 0000:00:13.1: --> PCI D0/legacy Suspending device 0000:00:13.0 ACPI: PCI interrupt for device 0000:00:13.0 disabled ohci_hcd 0000:00:13.0: --> PCI D0/legacy Suspending device 0000:00:12.0 ACPI: PCI interrupt for device 0000:00:12.0 disabled Suspending device 0000:00:06.0 Suspending device 0000:00:05.0 Suspending device 0000:00:04.0 Suspending device 0000:00:01.0 Suspending device 0000:00:00.0 Suspending device 0000:00 Suspending device pci0000:00 Suspending device LNXTHERM:03 Suspending device LNXTHERM:02 Suspending device LNXTHERM:01 Suspending device PNP0C0B:03 Suspending device PNP0C0B:02 ACPI: Transitioning device [C351] to D0 ACPI: Transitioning device [C351] to D0 Suspending device PNP0C0B:01 ACPI: Transitioning device [C350] to D0 ACPI: Transitioning device [C350] to D0 Suspending device PNP0C0B:00 ACPI: Transitioning device [C34F] to D0 ACPI: Transitioning device [C34F] to D0 Suspending device LNXPOWER:06 Suspending device LNXPOWER:05 Suspending device LNXPOWER:04 Suspending device LNXPOWER:03 Suspending device LNXTHERM:00 Suspending device PNP0C02:02 Suspending device PNP0C14:00 Suspending device PNP0C0D:00 Suspending device PNP0C0E:00 Suspending device ACPI0003:00 Suspending device PNP0C0A:01 Suspending device PNP0C0A:00 Suspending device HPQ0006:00 Suspending device PNP0C02:01 Suspending device device:49 Suspending device device:48 Suspending device device:47 Suspending device device:46 Suspending device device:45 Suspending device device:44 Suspending device device:43 Suspending device device:42 Suspending device device:41 Suspending device device:40 Suspending device device:3f Suspending device device:3e Suspending device device:3d Suspending device device:3c Suspending device device:3b Suspending device device:3a Suspending device device:39 Suspending device device:38 Suspending device device:37 Suspending device device:36 Suspending device device:35 Suspending device device:34 Suspending device device:33 Suspending device PNP0C0F:07 Suspending device PNP0C0F:06 Suspending device PNP0C0F:05 Suspending device PNP0C0F:04 Suspending device PNP0C0F:03 Suspending device PNP0C0F:02 Suspending device PNP0C0F:01 Suspending device PNP0C0F:00 Suspending device device:32 Suspending device device:31 Suspending device device:30 Suspending device device:2f Suspending device device:2e Suspending device device:2d Suspending device device:2c Suspending device device:2b Suspending device device:2a Suspending device device:29 Suspending device device:28 Suspending device device:27 Suspending device device:26 Suspending device device:25 Suspending device device:24 Suspending device device:23 Suspending device device:22 Suspending device device:21 Suspending device device:20 Suspending device device:1f Suspending device device:1e Suspending device device:1d Suspending device device:1c Suspending device device:1b Suspending device device:1a Suspending device device:19 Suspending device device:18 Suspending device device:17 Suspending device device:16 Suspending device device:15 Suspending device device:14 Suspending device device:13 Suspending device device:12 Suspending device device:11 Suspending device device:10 Suspending device PNP0C02:00 Suspending device PNP0000:00 Suspending device LNXPOWER:02 Suspending device SYN0118:00 Suspending device PNP0303:00 Suspending device PNP0B00:00 Suspending device PNP0800:00 Suspending device PNP0200:00 Suspending device PNP0100:00 Suspending device PNP0C04:00 Suspending device IFX0102:00 Suspending device LNXPOWER:01 Suspending device PNP0401:00 Suspending device PNP0A06:00 Suspending device PNP0C09:00 Suspending device device:0f Suspending device device:0e Suspending device LNXPOWER:00 Suspending device device:0d Suspending device device:0c Suspending device device:0b Suspending device device:0a Suspending device device:09 Suspending device device:08 Suspending device device:07 Suspending device device:06 Suspending device device:05 Suspending device device:04 Suspending device device:03 Suspending device device:02 Suspending device LNXVIDEO:00 Suspending device device:01 Suspending device PNP0A03:00 Suspending device PNP0C01:00 Suspending device device:00 Suspending device ACPI0007:01 Suspending device ACPI0007:00 Suspending device LNXPWRBN:00 Suspending device LNXSYSTM:00 Suspending device id Suspending device vtcon0 Suspending device platform Disabling non-boot CPUs ... CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU 1 is now offline SMP alternatives: switching to UP code CPU0 attaching NULL sched-domain. CPU1 is down Extended CMOS year: 2000 swsusp: critical section: swsusp: Need to copy 149622 pages swsusp: Normal pages needed: 149622 + 1024 + 36, available pages: 341743 evxfevnt-0079 [00] enable : System is already in ACPI mode Extended CMOS year: 2000 Enabling non-boot CPUs ... CPU0 attaching NULL sched-domain. SMP alternatives: switching to SMP code Booting processor 1/2 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 3990.20 BogoMIPS (lpj=7980408) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping 02 Clockevents: could not switch to one-shot mode: lapic is not functional. CPU0 attaching sched-domain: Could not switch to high resolution mode on CPU 1 domain 0: span 00000000,00000000,00000000,00000003 groups: 00000000,00000000,00000000,00000001 00000000,00000000,00000000,00000002 CPU1 attaching sched-domain: domain 0: span 00000000,00000000,00000000,00000003 groups: 00000000,00000000,00000000,00000002 00000000,00000000,00000000,00000001 CPU1 is up ACPI: Transitioning device [C34F] to D3 ACPI: Transitioning device [C34F] to D3 ACPI: Transitioning device [C350] to D3 ACPI: Transitioning device [C350] to D3 PM: Writing back config space on device 0000:00:01.0 at offset 7 (was 2206161, writing 22206161) PCI: Setting latency timer of device 0000:00:04.0 to 64 PCI: Setting latency timer of device 0000:00:05.0 to 64 PCI: Setting latency timer of device 0000:00:06.0 to 64 PM: Writing back config space on device 0000:00:12.0 at offset 1 (was 2b00003, writing 2b00007) ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 16 (level, low) -> IRQ 16 ohci_hcd 0000:00:13.0: PCI legacy resume ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 19 ohci_hcd 0000:00:13.1: PCI legacy resume ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:13.2: PCI D0, from previous PCI D3 ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 19 PM: Writing back config space on device 0000:00:13.2 at offset 1 (was 2b00007, writing 2b00017) ehci_hcd 0000:00:13.2: lost power, restarting usb usb1: root hub lost power or was reset ehci_hcd 0000:00:13.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT ehci_hcd 0000:00:13.2: MWI active ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16 PM: Writing back config space on device 0000:00:14.2 at offset f (was 10a, writing a) PM: Writing back config space on device 0000:00:14.2 at offset 1 (was 4100006, writing 4100002) ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16 PM: Writing back config space on device 0000:00:14.4 at offset 6 (was 40030200, writing 40060200) PM: Writing back config space on device 0000:30:00.0 at offset 1 (was 100007, writing 100003) PM: Writing back config space on device 0000:02:04.0 at offset f (was 3c4010a, writing 5c0010a) PM: Writing back config space on device 0000:02:04.0 at offset 3 (was 824010, writing 82a810) ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[d4011000-d40117ff] Max Packet=[2048] IR/IT contexts=[4/8] ACPI: PCI Interrupt 0000:02:04.2[A] -> GSI 20 (level, low) -> IRQ 20 ACPI: PCI Interrupt 0000:02:04.3[A] -> GSI 20 (level, low) -> IRQ 20 sd 0:0:0:0: [sda] Starting disk ata2: SATA link down (SStatus 0 SControl 300) ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: configured for UDMA/100 sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hda: selected mode 0x22 usb usb1: usb resume ehci_hcd 0000:00:13.2: resume root hub after power loss hub 1-0:1.0: trying to enable port power on non-switchable hub usb usb2: usb resume ohci_hcd 0000:00:13.0: BIOS/SMM active, control 008 ohci_hcd 0000:00:13.0: OHCI controller state ohci_hcd 0000:00:13.0: OHCI 1.0, NO legacy support registers ohci_hcd 0000:00:13.0: control 0x083 HCFS=operational CBSR=3 ohci_hcd 0000:00:13.0: cmdstatus 0x00000 SOC=0 ohci_hcd 0000:00:13.0: intrstatus 0x00000004 SF ohci_hcd 0000:00:13.0: intrenable 0x8000005a MIE RHSC UE RD WDH ohci_hcd 0000:00:13.0: hcca frame #0005 ohci_hcd 0000:00:13.0: roothub.a 02000204 POTPGT=2 NPS NDP=4(4) ohci_hcd 0000:00:13.0: roothub.b 00000000 PPCM=0000 DR=0000 ohci_hcd 0000:00:13.0: roothub.status 00008000 DRWE ohci_hcd 0000:00:13.0: roothub.portstatus [0] 0x00000100 PPS ohci_hcd 0000:00:13.0: roothub.portstatus [1] 0x00010100 CSC PPS ohci_hcd 0000:00:13.0: roothub.portstatus [2] 0x00000100 PPS ohci_hcd 0000:00:13.0: roothub.portstatus [3] 0x00000100 PPS ohci_hcd 0000:00:13.0: restart complete usb usb2: root hub lost power or was reset hub 2-0:1.0: trying to enable port power on non-switchable hub hub 2-0:1.0: logical disconnect on port 2 usb usb3: usb resume ohci_hcd 0000:00:13.1: BIOS/SMM active, control 008 ohci_hcd 0000:00:13.1: OHCI controller state ohci_hcd 0000:00:13.1: OHCI 1.0, NO legacy support registers ohci_hcd 0000:00:13.1: control 0x083 HCFS=operational CBSR=3 ohci_hcd 0000:00:13.1: cmdstatus 0x00000 SOC=0 ohci_hcd 0000:00:13.1: intrstatus 0x00000004 SF ohci_hcd 0000:00:13.1: intrenable 0x8000005a MIE RHSC UE RD WDH ohci_hcd 0000:00:13.1: hcca frame #0005 ohci_hcd 0000:00:13.1: roothub.a 02000204 POTPGT=2 NPS NDP=4(4) ohci_hcd 0000:00:13.1: roothub.b 00000000 PPCM=0000 DR=0000 ohci_hcd 0000:00:13.1: roothub.status 00008000 DRWE ohci_hcd 0000:00:13.1: roothub.portstatus [0] 0x00010100 CSC PPS ohci_hcd 0000:00:13.1: roothub.portstatus [1] 0x00000100 PPS ohci_hcd 0000:00:13.1: roothub.portstatus [2] 0x00010100 CSC PPS ohci_hcd 0000:00:13.1: roothub.portstatus [3] 0x00000100 PPS ohci_hcd 0000:00:13.1: restart complete usb usb3: root hub lost power or was reset hub 3-0:1.0: trying to enable port power on non-switchable hub hub 3-0:1.0: logical disconnect on port 1 hub 3-0:1.0: logical disconnect on port 3 Restarting tasks ... <7>hub 1-0:1.0: state 7 ports 8 chg 0000 evt 004c ehci_hcd 0000:00:13.2: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT hub 1-0:1.0: port 2, status 0501, change 0001, 480 Mb/s done. swsusp: Basic memory bitmaps freed hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x501 ehci_hcd 0000:00:13.2: port 2 full speed --> companion ehci_hcd 0000:00:13.2: GetStatus port 2 status 003801 POWER OWNER sig=j CONNECT hub 1-0:1.0: port 2 not reset yet, waiting 50ms ehci_hcd 0000:00:13.2: GetStatus port 2 status 003002 POWER OWNER sig=se0 CSC ehci_hcd 0000:00:13.2: GetStatus port 3 status 001803 POWER sig=j CSC CONNECT hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x501 ehci_hcd 0000:00:13.2: port 3 full speed --> companion ehci_hcd 0000:00:13.2: GetStatus port 3 status 003801 POWER OWNER sig=j CONNECT hub 1-0:1.0: port 3 not reset yet, waiting 50ms ehci_hcd 0000:00:13.2: GetStatus port 3 status 003002 POWER OWNER sig=se0 CSC ehci_hcd 0000:00:13.2: GetStatus port 6 status 001403 POWER sig=k CSC CONNECT hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501 ehci_hcd 0000:00:13.2: port 6 low speed --> companion ehci_hcd 0000:00:13.2: GetStatus port 6 status 003002 POWER OWNER sig=se0 CSC hub 2-0:1.0: state 7 ports 4 chg 0004 evt 0004 ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [1] = 0x00010101 CSC PPS CCS hub 2-0:1.0: port 2, status 0101, change 0001, 12 Mb/s usb 2-2: USB disconnect, address 3 usb 2-2: unregistering device usb 2-2: usb_disable_device nuking all URBs usb 2-2: unregistering interface 2-2:1.0 usb 2-2:1.0: uevent usb 2-2:1.0: uevent usb 2-2: unregistering interface 2-2:1.1 usb 2-2:1.1: uevent usb 2-2:1.1: uevent usb 2-2: unregistering interface 2-2:1.2 usb 2-2:1.2: uevent usb 2-2:1.2: uevent usb 2-2: unregistering interface 2-2:1.3 usb 2-2:1.3: uevent usb 2-2:1.3: uevent usb 2-2: uevent hub 2-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101 ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS usb 2-2: new full speed USB device using ohci_hcd and address 4 ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS usb 2-2: skipped 1 descriptor after interface usb 2-2: default language 0x0409 usb 2-2: uevent usb 2-2: usb_probe_device usb 2-2: configuration #1 chosen from 1 choice usb 2-2: adding 2-2:1.0 (config #1, interface 0) usb 2-2:1.0: uevent usb 2-2:1.0: uevent hci_usb 2-2:1.0: usb_probe_interface hci_usb 2-2:1.0: usb_probe_interface - got id usb 2-2: adding 2-2:1.1 (config #1, interface 1) usb 2-2:1.1: uevent usb 2-2:1.1: uevent usb 2-2: adding 2-2:1.2 (config #1, interface 2) usb 2-2:1.2: uevent usb 2-2:1.2: uevent hci_usb 2-2:1.2: usb_probe_interface hci_usb 2-2:1.2: usb_probe_interface - got id usb 2-2: adding 2-2:1.3 (config #1, interface 3) usb 2-2:1.3: uevent usb 2-2:1.3: uevent hci_usb 2-2:1.3: usb_probe_interface hci_usb 2-2:1.3: usb_probe_interface - got id /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '004' usb 2-2: new device found, idVendor=03f0, idProduct=171d usb 2-2: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-2: Product: HP Integrated Module usb 2-2: Manufacturer: Broadcom Corp hub 3-0:1.0: state 7 ports 4 chg 000a evt 000a ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [0] = 0x00010101 CSC PPS CCS hub 3-0:1.0: port 1, status 0101, change 0001, 12 Mb/s usb 3-1: USB disconnect, address 4 usb 3-1: unregistering device usb 3-1: usb_disable_device nuking all URBs usb 3-1: unregistering interface 3-1:1.0 usb 3-1:1.0: uevent usb 3-1:1.0: uevent usb 3-1: uevent hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS usb 3-1: new full speed USB device using ohci_hcd and address 6 ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS usb 3-1: ep0 maxpacket = 8 usb 3-1: default language 0x0409 usb 3-1: uevent usb 3-1: usb_probe_device usb 3-1: configuration #1 chosen from 1 choice usb 3-1: adding 3-1:1.0 (config #1, interface 0) usb 3-1:1.0: uevent usb 3-1:1.0: uevent /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '006' usb 3-1: new device found, idVendor=08ff, idProduct=2580 usb 3-1: new device strings: Mfr=0, Product=1, SerialNumber=0 usb 3-1: Product: Fingerprint Sensor ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [2] = 0x00010301 CSC LSDA PPS CCS hub 3-0:1.0: port 3, status 0301, change 0001, 1.5 Mb/s usb 3-3: USB disconnect, address 5 usb 3-3: unregistering device usb 3-3: usb_disable_device nuking all URBs usb 3-3: unregistering interface 3-3:1.0 usb 3-3:1.0: uevent usb 3-3:1.0: uevent usb 3-3: unregistering interface 3-3:1.1 /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/file.c: removing 96 minor usb 3-3:1.1: uevent usb 3-3:1.1: uevent usb 3-3: uevent hub 3-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x301 ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [2] = 0x00100303 PRSC LSDA PPS PES CCS usb 3-3: new low speed USB device using ohci_hcd and address 7 ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [2] = 0x00100303 PRSC LSDA PPS PES CCS usb 3-3: skipped 1 descriptor after interface usb 3-3: skipped 1 descriptor after interface usb 3-3: default language 0x0409 usb 3-3: uevent usb 3-3: usb_probe_device usb 3-3: configuration #1 chosen from 1 choice usb 3-3: adding 3-3:1.0 (config #1, interface 0) usb 3-3:1.0: uevent usb 3-3:1.0: uevent usbhid 3-3:1.0: usb_probe_interface usbhid 3-3:1.0: usb_probe_interface - got id input: Logitech USB Receiver as /class/input/input10 input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:13.1-3 usb 3-3: adding 3-3:1.1 (config #1, interface 1) usb 3-3:1.1: uevent usb 3-3:1.1: uevent usbhid 3-3:1.1: usb_probe_interface usbhid 3-3:1.1: usb_probe_interface - got id input: Logitech USB Receiver as /class/input/input11 /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/file.c: looking for a minor, starting at 96 input,hiddev96: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:13.1-3 /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '007' usb 3-3: new device found, idVendor=046d, idProduct=c521 usb 3-3: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-3: Product: USB Receiver usb 3-3: Manufacturer: Logitech hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0040 hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0004 hub 3-0:1.0: state 7 ports 4 chg 0000 evt 0008 hub 1-0:1.0: hub_suspend usb usb1: bus auto-suspend ehci_hcd 0000:00:13.2: suspend root hub bcm43xx driver ACPI: PCI Interrupt 0000:30:00.0[A] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:30:00.0 to 64 bcm43xx: Chip ID 0x4311, rev 0x1 bcm43xx: Number of cores: 4 bcm43xx: Core 0: ID 0x800, rev 0x11, vendor 0x4243 bcm43xx: Core 1: ID 0x812, rev 0xa, vendor 0x4243 bcm43xx: Core 2: ID 0x817, rev 0x3, vendor 0x4243 bcm43xx: Core 3: ID 0x820, rev 0x1, vendor 0x4243 bcm43xx: PHY connected bcm43xx: Detected PHY: Analog: 4, Type 2, Revision 8 bcm43xx: Detected Radio: ID: 2205017f (Manuf: 17f Ver: 2050 Rev: 2) bcm43xx: Radio initialized bcm43xx: Radio initialized bcm43xx: PHY connected bcm43xx: Microcode rev 0x127, pl 0xe (2005-04-18 02:36:27) bcm43xx: Radio turned on bcm43xx: Radio enabled by hardware bcm43xx: Chip initialized bcm43xx: 32-bit DMA initialized bcm43xx: Keys cleared bcm43xx: Selected 802.11 core (phytype 2) ADDRCONF(NETDEV_UP): eth1: link is not ready SoftMAC: Scanning finished: scanned 13 channels starting with channel 1 SoftMAC: Associate: Scanning for networks first. SoftMAC: Scanning finished: scanned 13 channels starting with channel 1 SoftMAC: Queueing Authentication Request to 00:17:9a:f3:b5:75 SoftMAC: Cannot associate without being authenticated, requested authentication SoftMAC: Sent Authentication Request to 00:17:9a:f3:b5:75. SoftMAC: Open Authentication completed with 00:17:9a:f3:b5:75 SoftMAC: sent association request! SoftMAC: associated! ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready SFW2-OUT-ERROR IN= OUT=eth1 SRC=0000:0000:0000:0000:0000:0000:0000:0000 DST=ff02:0000:0000:0000:0000:0000:0000:0016 LEN=76 TC=0 HOPLIMIT=1 FLOWLBL=0 OPT ( ) PROTO=ICMPv6 TYPE=143 CODE=0 SoftMAC: Getting essid from req_essid SFW2-OUT-ERROR IN= OUT=eth1 SRC=0000:0000:0000:0000:0000:0000:0000:0000 DST=ff02:0000:0000:0000:0000:0001:ffbe:9531 LEN=64 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=ICMPv6 TYPE=135 CODE=0 SoftMAC: Getting essid from req_essid SFW2-OUT-ERROR IN= OUT=eth1 SRC=fe80:0000:0000:0000:0214:a5ff:febe:9531 DST=ff02:0000:0000:0000:0000:0000:0000:0002 LEN=56 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=ICMPv6 TYPE=133 CODE=0 SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SFW2-OUT-ERROR IN= OUT=eth1 SRC=fe80:0000:0000:0000:0214:a5ff:febe:9531 DST=ff02:0000:0000:0000:0000:0000:0000:0016 LEN=76 TC=0 HOPLIMIT=1 FLOWLBL=0 OPT ( ) PROTO=ICMPv6 TYPE=143 CODE=0 SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SFW2-OUT-ERROR IN= OUT=eth1 SRC=fe80:0000:0000:0000:0214:a5ff:febe:9531 DST=ff02:0000:0000:0000:0000:0000:0000:0002 LEN=56 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=ICMPv6 TYPE=133 CODE=0 SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:17:9a:f3:b5:75:08:00 SRC=62.121.83.254 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=19492 PROTO=2 SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SFW2-OUT-ERROR IN= OUT=eth1 SRC=fe80:0000:0000:0000:0214:a5ff:febe:9531 DST=ff02:0000:0000:0000:0000:0000:0000:0002 LEN=56 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=ICMPv6 TYPE=133 CODE=0 SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid eth1: no IPv6 routers present WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() Call Trace: [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 [<ffffffff8024ee6d>] update_target+0x71/0x76 [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0 [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 [<ffffffff8022f18e>] default_wake_function+0x0/0xf [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 [<ffffffff80282e91>] vma_link+0xdd/0x10b [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 [<ffffffff802a0896>] do_ioctl+0x2a/0x77 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b [<ffffffff8020bfde>] system_call+0x7e/0x83 WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() Call Trace: [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 [<ffffffff8024ee6d>] update_target+0x71/0x76 [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2 [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 [<ffffffff8022f18e>] default_wake_function+0x0/0xf [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 [<ffffffff80282e91>] vma_link+0xdd/0x10b [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 [<ffffffff802a0896>] do_ioctl+0x2a/0x77 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b [<ffffffff8020bfde>] system_call+0x7e/0x83 SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() Call Trace: [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 [<ffffffff8024ee6d>] update_target+0x71/0x76 [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0 [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 [<ffffffff8022f18e>] default_wake_function+0x0/0xf [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 [<ffffffff80282e91>] vma_link+0xdd/0x10b [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 [<ffffffff802a0896>] do_ioctl+0x2a/0x77 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b [<ffffffff8020bfde>] system_call+0x7e/0x83 WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() Call Trace: [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 [<ffffffff8024ee6d>] update_target+0x71/0x76 [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2 [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 [<ffffffff8022f18e>] default_wake_function+0x0/0xf [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 [<ffffffff80282e91>] vma_link+0xdd/0x10b [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 [<ffffffff802a0896>] do_ioctl+0x2a/0x77 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b [<ffffffff8020bfde>] system_call+0x7e/0x83 SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:17:9a:f3:b5:75:08:00 SRC=62.121.83.254 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=21260 PROTO=2 SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:17:9a:f3:b5:75:08:00 SRC=62.121.83.254 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=23324 PROTO=2 SoftMAC: Getting essid from req_essid WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() Call Trace: [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 [<ffffffff8024ee6d>] update_target+0x71/0x76 [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0 [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 [<ffffffff8022f18e>] default_wake_function+0x0/0xf [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 [<ffffffff80282e91>] vma_link+0xdd/0x10b [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 [<ffffffff802a0896>] do_ioctl+0x2a/0x77 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b [<ffffffff8020bfde>] system_call+0x7e/0x83 WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() Call Trace: [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 [<ffffffff8024ee6d>] update_target+0x71/0x76 [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2 [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 [<ffffffff8022f18e>] default_wake_function+0x0/0xf [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 [<ffffffff80282e91>] vma_link+0xdd/0x10b [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 [<ffffffff802a0896>] do_ioctl+0x2a/0x77 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b [<ffffffff8020bfde>] system_call+0x7e/0x83 SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() Call Trace: [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 [<ffffffff8024ee6d>] update_target+0x71/0x76 [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0 [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 [<ffffffff8022f18e>] default_wake_function+0x0/0xf [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 [<ffffffff80282e91>] vma_link+0xdd/0x10b [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 [<ffffffff802a0896>] do_ioctl+0x2a/0x77 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b [<ffffffff8020bfde>] system_call+0x7e/0x83 WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() Call Trace: [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 [<ffffffff8024ee6d>] update_target+0x71/0x76 [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2 [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 [<ffffffff8022f18e>] default_wake_function+0x0/0xf [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 [<ffffffff80282e91>] vma_link+0xdd/0x10b [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 [<ffffffff802a0896>] do_ioctl+0x2a/0x77 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b [<ffffffff8020bfde>] system_call+0x7e/0x83 SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() Call Trace: [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 [<ffffffff8024ee6d>] update_target+0x71/0x76 [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0 [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 [<ffffffff8022f18e>] default_wake_function+0x0/0xf [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 [<ffffffff80282e91>] vma_link+0xdd/0x10b [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 [<ffffffff802a0896>] do_ioctl+0x2a/0x77 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b [<ffffffff8020bfde>] system_call+0x7e/0x83 WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() Call Trace: [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 [<ffffffff8024ee6d>] update_target+0x71/0x76 [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2 [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 [<ffffffff8022f18e>] default_wake_function+0x0/0xf [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 [<ffffffff80282e91>] vma_link+0xdd/0x10b [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 [<ffffffff802a0896>] do_ioctl+0x2a/0x77 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b [<ffffffff8020bfde>] system_call+0x7e/0x83 SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() Call Trace: [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 [<ffffffff8024ee6d>] update_target+0x71/0x76 [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0 [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 [<ffffffff8022f18e>] default_wake_function+0x0/0xf [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 [<ffffffff80282e91>] vma_link+0xdd/0x10b [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 [<ffffffff802a0896>] do_ioctl+0x2a/0x77 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b [<ffffffff8020bfde>] system_call+0x7e/0x83 WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() Call Trace: [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 [<ffffffff8024ee6d>] update_target+0x71/0x76 [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2 [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 [<ffffffff8022f18e>] default_wake_function+0x0/0xf [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 [<ffffffff80282e91>] vma_link+0xdd/0x10b [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 [<ffffffff802a0896>] do_ioctl+0x2a/0x77 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b [<ffffffff8020bfde>] system_call+0x7e/0x83 SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() Call Trace: [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 [<ffffffff8024ee6d>] update_target+0x71/0x76 [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0 [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 [<ffffffff8022f18e>] default_wake_function+0x0/0xf [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 [<ffffffff80282e91>] vma_link+0xdd/0x10b [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 [<ffffffff802a0896>] do_ioctl+0x2a/0x77 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b [<ffffffff8020bfde>] system_call+0x7e/0x83 WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() Call Trace: [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 [<ffffffff8024ee6d>] update_target+0x71/0x76 [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2 [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 [<ffffffff8022f18e>] default_wake_function+0x0/0xf [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 [<ffffffff80282e91>] vma_link+0xdd/0x10b [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 [<ffffffff802a0896>] do_ioctl+0x2a/0x77 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b [<ffffffff8020bfde>] system_call+0x7e/0x83 SoftMAC: Getting essid from req_essid SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:17:9a:f3:b5:75:08:00 SRC=62.121.83.254 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=25180 PROTO=2 SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() Call Trace: [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 [<ffffffff8024ee6d>] update_target+0x71/0x76 [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0 [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 [<ffffffff8022f18e>] default_wake_function+0x0/0xf [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 [<ffffffff80282e91>] vma_link+0xdd/0x10b [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 [<ffffffff802a0896>] do_ioctl+0x2a/0x77 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b [<ffffffff8020bfde>] system_call+0x7e/0x83 WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() Call Trace: [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 [<ffffffff8024ee6d>] update_target+0x71/0x76 [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2 [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 [<ffffffff8022f18e>] default_wake_function+0x0/0xf [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 [<ffffffff80282e91>] vma_link+0xdd/0x10b [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 [<ffffffff802a0896>] do_ioctl+0x2a/0x77 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b [<ffffffff8020bfde>] system_call+0x7e/0x83 SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() Call Trace: [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 [<ffffffff8024ee6d>] update_target+0x71/0x76 [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0 [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 [<ffffffff8022f18e>] default_wake_function+0x0/0xf [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 [<ffffffff80282e91>] vma_link+0xdd/0x10b [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 [<ffffffff802a0896>] do_ioctl+0x2a/0x77 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b [<ffffffff8020bfde>] system_call+0x7e/0x83 WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() Call Trace: [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 [<ffffffff8024ee6d>] update_target+0x71/0x76 [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2 [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 [<ffffffff8022f18e>] default_wake_function+0x0/0xf [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 [<ffffffff80282e91>] vma_link+0xdd/0x10b [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 [<ffffffff802a0896>] do_ioctl+0x2a/0x77 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b [<ffffffff8020bfde>] system_call+0x7e/0x83 SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() Call Trace: [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 [<ffffffff8024ee6d>] update_target+0x71/0x76 [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0 [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 [<ffffffff8022f18e>] default_wake_function+0x0/0xf [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 [<ffffffff80282e91>] vma_link+0xdd/0x10b [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 [<ffffffff802a0896>] do_ioctl+0x2a/0x77 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b [<ffffffff8020bfde>] system_call+0x7e/0x83 WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() Call Trace: [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 [<ffffffff8024ee6d>] update_target+0x71/0x76 [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2 [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 [<ffffffff8022f18e>] default_wake_function+0x0/0xf [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 [<ffffffff80282e91>] vma_link+0xdd/0x10b [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 [<ffffffff802a0896>] do_ioctl+0x2a/0x77 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b [<ffffffff8020bfde>] system_call+0x7e/0x83 SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:17:9a:f3:b5:75:08:00 SRC=62.121.83.254 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=26892 PROTO=2 SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() Call Trace: [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 [<ffffffff8024ee6d>] update_target+0x71/0x76 [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0 [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 [<ffffffff8022f18e>] default_wake_function+0x0/0xf [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 [<ffffffff80282e91>] vma_link+0xdd/0x10b [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 [<ffffffff802a0896>] do_ioctl+0x2a/0x77 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b [<ffffffff8020bfde>] system_call+0x7e/0x83 WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() Call Trace: [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 [<ffffffff8024ee6d>] update_target+0x71/0x76 [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2 [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 [<ffffffff8022f18e>] default_wake_function+0x0/0xf [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 [<ffffffff80282e91>] vma_link+0xdd/0x10b [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 [<ffffffff802a0896>] do_ioctl+0x2a/0x77 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b [<ffffffff8020bfde>] system_call+0x7e/0x83 SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() Call Trace: [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 [<ffffffff8024ee6d>] update_target+0x71/0x76 [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0 [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 [<ffffffff8022f18e>] default_wake_function+0x0/0xf [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 [<ffffffff80282e91>] vma_link+0xdd/0x10b [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 [<ffffffff802a0896>] do_ioctl+0x2a/0x77 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b [<ffffffff8020bfde>] system_call+0x7e/0x83 WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() Call Trace: [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 [<ffffffff8024ee6d>] update_target+0x71/0x76 [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2 [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 [<ffffffff8022f18e>] default_wake_function+0x0/0xf [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 [<ffffffff80282e91>] vma_link+0xdd/0x10b [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 [<ffffffff802a0896>] do_ioctl+0x2a/0x77 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b [<ffffffff8020bfde>] system_call+0x7e/0x83 SoftMAC: Getting essid from req_essid WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() Call Trace: [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 [<ffffffff8024ee6d>] update_target+0x71/0x76 [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0 [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 [<ffffffff8022f18e>] default_wake_function+0x0/0xf [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 [<ffffffff80282e91>] vma_link+0xdd/0x10b [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 [<ffffffff802a0896>] do_ioctl+0x2a/0x77 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b [<ffffffff8020bfde>] system_call+0x7e/0x83 WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() Call Trace: [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82 [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2 [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 [<ffffffff8024ee6d>] update_target+0x71/0x76 [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2 [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382 [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 [<ffffffff8022f18e>] default_wake_function+0x0/0xf [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 [<ffffffff80282e91>] vma_link+0xdd/0x10b [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 [<ffffffff802a0896>] do_ioctl+0x2a/0x77 [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b [<ffffffff8020bfde>] system_call+0x7e/0x83 SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid SoftMAC: Getting essid from req_essid ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: 2.6.23-mm1 2007-10-12 21:32 ` 2.6.23-mm1 Rafael J. Wysocki @ 2007-10-15 16:09 ` Mark Gross 2007-10-15 20:40 ` 2.6.23-mm1 Rafael J. Wysocki 2007-10-17 17:21 ` [PATCH] static initialization and blocking notification for pm_qos... was 2.6.23-mm1 Mark Gross 1 sibling, 1 reply; 8+ messages in thread From: Mark Gross @ 2007-10-15 16:09 UTC (permalink / raw) To: Rafael J. Wysocki Cc: Andrew Morton, linux-kernel, ACPI Devel Maling List, Len Brown, Arjan van de Ven On Fri, Oct 12, 2007 at 11:32:40PM +0200, Rafael J. Wysocki wrote: > On Friday, 12 October 2007 06:31, Andrew Morton wrote: > > > > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.23/2.6.23-mm1/ > > > > - I've been largely avoiding applying anything since rc8-mm2 in an attempt > > to stabilise things for the 2.6.23 merge. > > > > But that didn't stop all the subsystem maintainers from going nuts, with > > the usual accuracy. We're up to a 37MB diff now, but it seems to be working > > a bit better. > > I get many traces similar to the one below from it (w/ hotfixes): > > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() This is from : WARN_ON(irqs_disabled()) in the cmp_call_function_mask processor_idle.c is registering a acpi_processor_latency_notify my code changed the notifier call from blocking_notifier_call_chain to srcu_notifier_call_chain, because dynamic creation of notifier chains at runtime where easier with the srcu_notifier_call_chain than the blocking_notifier_call_chain. As dynamic creation of PM_QOS parameters are no longer needed I can change the notifiers back to match what was in lanency.c However; looking at the call tree differences between blockin_notifier_call_chain and srcu_notifier_call_chain I cannot see a difference in irq enabling / disabling. I'm not confident this will address this yet. I'll change the PM_QOS params patch to use blocking notifiers and test on a 64bit boot and see what happens. I've been needing to setup my x86_64 dev box for a while now anyway. thanks, --mgross > > Call Trace: > [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 > [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 > [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 > [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 > [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 > [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2 > [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 > [<ffffffff8024ee6d>] update_target+0x71/0x76 > [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2 > [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382 > [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc > [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 > [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f > [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 > [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 > [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 > [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 > [<ffffffff8022f18e>] default_wake_function+0x0/0xf > [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 > [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 > [<ffffffff80282e91>] vma_link+0xdd/0x10b > [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a > [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 > [<ffffffff802a0896>] do_ioctl+0x2a/0x77 > [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e > [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b > [<ffffffff8020bfde>] system_call+0x7e/0x83 > > Full dmesg attached. > > Greetings, > Rafael > Linux version 2.6.23-mm1 (rafael@albercik) (gcc version 4.1.2 20061115 (prerelease) (SUSE Linux)) #26 SMP Fri Oct 12 22:59:33 CEST 2007 > Command line: root=/dev/sda3 vga=792 resume=/dev/sda1 no_console_suspend > BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) > BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) > BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 0000000077fd0000 (usable) > BIOS-e820: 0000000077fd0000 - 0000000077fe5600 (reserved) > BIOS-e820: 0000000077fe5600 - 0000000077ff8000 (ACPI NVS) > BIOS-e820: 0000000077ff8000 - 0000000080000000 (reserved) > BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) > BIOS-e820: 00000000fec00000 - 00000000fec02000 (reserved) > BIOS-e820: 00000000ffbc0000 - 00000000ffcc0000 (reserved) > BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) > Entering add_active_range(0, 0, 159) 0 entries of 256 used > Entering add_active_range(0, 256, 491472) 1 entries of 256 used > end_pfn_map = 1048576 > DMI 2.4 present. > ACPI: RSDP 000F7D30, 0024 (r2 HP ) > ACPI: XSDT 77FE57B4, 0054 (r1 HP 0944 6070620 HP 1) > ACPI: FACP 77FE5684, 00F4 (r4 HP 0944 3 HP 1) > ACPI: DSDT 77FE58DC, EE7A (r1 HP SB400 10000 MSFT 100000E) > ACPI: FACS 77FF7E80, 0040 > ACPI: APIC 77FE5808, 0062 (r1 HP 0944 1 HP 1) > ACPI: MCFG 77FE586C, 003C (r1 HP 0944 1 HP 1) > ACPI: TCPA 77FE58A8, 0032 (r2 HP 0944 1 HP 1) > ACPI: SSDT 77FF4756, 0059 (r1 HP HPQNLP 1 MSFT 100000E) > ACPI: SSDT 77FF47AF, 0206 (r1 HP PSSTBLID 1 HP 1) > Entering add_active_range(0, 0, 159) 0 entries of 256 used > Entering add_active_range(0, 256, 491472) 1 entries of 256 used > No mptable found. > sizeof(struct page) = 56 > Zone PFN ranges: > DMA 0 -> 4096 > DMA32 4096 -> 1048576 > Normal 1048576 -> 1048576 > Movable zone start PFN for each node > early_node_map[2] active PFN ranges > 0: 0 -> 159 > 0: 256 -> 491472 > On node 0 totalpages: 491375 > Node 0 memmap at 0xffff810001000000 size 27525120 first pfn 0xffff810001000000 > DMA zone: 56 pages used for memmap > DMA zone: 1481 pages reserved > DMA zone: 2462 pages, LIFO batch:0 > DMA32 zone: 6663 pages used for memmap > DMA32 zone: 480713 pages, LIFO batch:31 > Normal zone: 0 pages used for memmap > Movable zone: 0 pages used for memmap > ATI board detected. Disabling timer routing over 8254. > ACPI: PM-Timer IO Port: 0x8008 > ACPI: Local APIC address 0xfee00000 > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) > Processor #0 (Bootup-CPU) > ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) > Processor #1 > ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) > ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) > IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level) > ACPI: IRQ0 used by override. > ACPI: IRQ2 used by override. > Setting APIC routing to flat > Using ACPI (MADT) for SMP configuration information > swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 > swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000 > swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000 > Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) > SMP: Allowing 2 CPUs, 0 hotplug CPUs > PERCPU: Allocating 46704 bytes of per cpu data > Built 1 zonelists in Zone order, mobility grouping on. Total pages: 483175 > Kernel command line: root=/dev/sda3 vga=792 resume=/dev/sda1 no_console_suspend > Initializing CPU#0 > PID hash table entries: 4096 (order: 12, 32768 bytes) > Extended CMOS year: 2000 > TSC calibrated against PM_TIMER > Marking TSC unstable due to TSCs unsynchronized > time.c: Detected 1995.006 MHz processor. > Console: colour dummy device 80x25 > console [tty0] enabled > Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) > Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) > Checking aperture... > CPU 0: aperture @ 108000000 size 32 MB > Aperture too small (32 MB) > No AGP bridge found > Memory: 1923916k/1965888k available (2285k kernel code, 41360k reserved, 1517k data, 252k init) > Calibrating delay using timer specific routine.. 3994.14 BogoMIPS (lpj=7988280) > Security Framework initialized > Capability LSM initialized > Mount-cache hash table entries: 256 > CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) > CPU: L2 Cache: 512K (64 bytes/line) > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 0 > SMP alternatives: switching to UP code > ACPI: Core revision 20070126 > Parsing all Control Methods: > Table [DSDT](id 0001) - 1153 Objects with 113 Devices 337 Methods 33 Regions > Parsing all Control Methods: > Table [SSDT](id 0002) - 2 Objects with 0 Devices 2 Methods 0 Regions > Parsing all Control Methods: > Table [SSDT](id 0003) - 8 Objects with 0 Devices 0 Methods 0 Regions > tbxface-0598 [00] tb_load_namespace : ACPI Tables successfully acquired > evxfevnt-0091 [00] enable : Transition to ACPI mode successful > ..MP-BIOS bug: 8254 timer not connected to IO-APIC > Disabling APIC timer > SMP alternatives: switching to SMP code > Booting processor 1/2 APIC 0x1 > Initializing CPU#1 > Calibrating delay using timer specific routine.. 3990.29 BogoMIPS (lpj=7980587) > CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) > CPU: L2 Cache: 512K (64 bytes/line) > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 1 > AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping 02 > Brought up 2 CPUs > CPU0 attaching sched-domain: > domain 0: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000001 00000000,00000000,00000000,00000002 > CPU1 attaching sched-domain: > domain 0: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000002 00000000,00000000,00000000,00000001 > net_namespace: 120 bytes > Time: 21:13:03 Date: 10/12/07 > NET: Registered protocol family 16 > ACPI: bus type pci registered > PCI: Using configuration type 1 > evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x15 > evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 3 Wake, Enabled 11 Runtime GPEs in this block > ACPI: EC: Look up EC in DSDT > Completing Region/Field/Buffer/Package initialization:................................................................................................................................................................ > Initialized 29/33 Regions 0/0 Fields 63/64 Buffers 68/78 Packages (1172 nodes) > Initializing Device/Processor/Thermal objects by executing _INI methods:....... > Executed 7 _INI methods requiring 2 _STA executions (examined 120 objects) > ACPI: Interpreter enabled > ACPI: (supports S0 S3 S4 S5) > ACPI: Using IOAPIC for interrupt routing > PCI: MCFG configuration 0: base 3758096384 segment 0 buses 0 - 255 > PCI: MCFG area at e0000000 reserved in ACPI motherboard resources > PCI: Using MMCONFIG at e0000000 - efffffff > PCI: No mmconfig possible on device 00:18 > ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 > ACPI: PCI Root Bridge [C074] (0000:00) > PCI: Transparent bridge - 0000:00:14.4 > ACPI: PCI Interrupt Routing Table [\_SB_.C074._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.C074.C075._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.C074.C0DF._PRT] > ACPI: PCI Interrupt Link [C125] (IRQs 10 11) *0, disabled. > ACPI: PCI Interrupt Link [C126] (IRQs 10 11) *0, disabled. > ACPI: PCI Interrupt Link [C127] (IRQs 10 11) *0, disabled. > ACPI: PCI Interrupt Link [C128] (IRQs 10 11) *0, disabled. > ACPI: PCI Interrupt Link [C129] (IRQs 10 11) *0, disabled. > ACPI: PCI Interrupt Link [C12A] (IRQs 9) *0, disabled. > ACPI: PCI Interrupt Link [C12B] (IRQs 10 11) *0, disabled. > ACPI: PCI Interrupt Link [C12C] (IRQs *10 11) > ACPI: Power Resource [C223] (off) > ACPI: Power Resource [C1FE] (off) > ACPI: Power Resource [C217] (on) > ACPI: Power Resource [C34B] (off) > ACPI: Power Resource [C34C] (off) > ACPI: Power Resource [C34D] (off) > ACPI: Power Resource [C34E] (off) > Linux Plug and Play Support v0.97 (c) Adam Belay > pnp: PnP ACPI init > ACPI: bus type pnp registered > pnp: PnP ACPI: found 13 devices > ACPI: ACPI bus type pnp unregistered > SCSI subsystem initialized > libata version 3.00 loaded. > PCI: Using ACPI for IRQ routing > PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report > PCI: Cannot allocate resource region 0 of device 0000:00:14.2 > NetLabel: Initializing > NetLabel: domain hash size = 128 > NetLabel: protocols = UNLABELED CIPSOv4 > NetLabel: unlabeled traffic allowed by default > DMAR:No DMAR devices found > ACPI: RTC can wake from S4 > system 00:00: iomem range 0x0-0x9ffff could not be reserved > system 00:00: iomem range 0xe0000-0xfffff could not be reserved > system 00:00: iomem range 0x100000-0x77ffffff could not be reserved > system 00:0a: ioport range 0x40b-0x40b has been reserved > system 00:0a: ioport range 0x4d0-0x4d1 has been reserved > system 00:0a: ioport range 0x4d6-0x4d6 has been reserved > system 00:0a: iomem range 0xffb00000-0xffbfffff could not be reserved > system 00:0a: iomem range 0xfff00000-0xffffffff could not be reserved > system 00:0b: ioport range 0x8000-0x802f has been reserved > system 00:0b: ioport range 0x8100-0x811f has been reserved > system 00:0b: iomem range 0xe0000000-0xefffffff could not be reserved > system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved > system 00:0c: iomem range 0xcf000-0xcffff has been reserved > system 00:0c: iomem range 0x78000000-0x7fffffff could not be reserved > system 00:0c: iomem range 0xfee00000-0xfee00fff could not be reserved > PCI: Bridge: 0000:00:01.0 > IO window: 6000-6fff > MEM window: d4300000-d43fffff > PREFETCH window: c0000000-c7ffffff > PCI: Bridge: 0000:00:04.0 > IO window: 4000-5fff > MEM window: d0000000-d3ffffff > PREFETCH window: disabled. > PCI: Bridge: 0000:00:05.0 > IO window: 2000-3fff > MEM window: cc000000-cfffffff > PREFETCH window: disabled. > PCI: Bridge: 0000:00:06.0 > IO window: disabled. > MEM window: c8000000-c80fffff > PREFETCH window: disabled. > PCI: Bus 3, cardbus bridge: 0000:02:04.0 > IO window: 00001000-000010ff > IO window: 00001400-000014ff > PREFETCH window: 8c000000-8fffffff > MEM window: 90000000-93ffffff > PCI: Bridge: 0000:00:14.4 > IO window: disabled. > MEM window: d4000000-d42fffff > PREFETCH window: disabled. > PCI: Setting latency timer of device 0000:00:04.0 to 64 > PCI: Setting latency timer of device 0000:00:05.0 to 64 > PCI: Setting latency timer of device 0000:00:06.0 to 64 > ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 20 (level, low) -> IRQ 20 > NET: Registered protocol family 2 > Time: acpi_pm clocksource has been installed. > Clockevents: could not switch to one-shot mode:<6>Clockevents: could not switch to one-shot mode: lapic is not functional. > Could not switch to high resolution mode on CPU 1 > lapic is not functional. > Could not switch to high resolution mode on CPU 0 > IP route cache hash table entries: 65536 (order: 7, 524288 bytes) > TCP established hash table entries: 131072 (order: 9, 3145728 bytes) > TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) > TCP: Hash tables configured (established 131072 bind 65536) > TCP reno registered > checking if image is initramfs... it is > Freeing initrd memory: 5282k freed > audit: initializing netlink socket (disabled) > audit(1192223582.968:1): initialized > Total HugeTLB memory allocated, 0 > VFS: Disk quotas dquot_6.5.1 > Dquot-cache hash table entries: 512 (order 0, 4096 bytes) > io scheduler noop registered > io scheduler anticipatory registered > io scheduler deadline registered > io scheduler cfq registered (default) > PCI: MSI quirk detected. MSI deactivated. > Boot video device is 0000:01:05.0 > PCI: Setting latency timer of device 0000:00:04.0 to 64 > assign_interrupt_mode Found MSI capability > Allocate Port Service[0000:00:04.0:pcie00] > Allocate Port Service[0000:00:04.0:pcie01] > Allocate Port Service[0000:00:04.0:pcie03] > PCI: Setting latency timer of device 0000:00:05.0 to 64 > assign_interrupt_mode Found MSI capability > Allocate Port Service[0000:00:05.0:pcie00] > Allocate Port Service[0000:00:05.0:pcie01] > Allocate Port Service[0000:00:05.0:pcie03] > PCI: Setting latency timer of device 0000:00:06.0 to 64 > assign_interrupt_mode Found MSI capability > Allocate Port Service[0000:00:06.0:pcie00] > Allocate Port Service[0000:00:06.0:pcie01] > Allocate Port Service[0000:00:06.0:pcie03] > AER service couldn't init device 0000:00:04.0:pcie01 - no _OSC support > AER service couldn't init device 0000:00:05.0:pcie01 - no _OSC support > AER service couldn't init device 0000:00:06.0:pcie01 - no _OSC support > vesafb: framebuffer at 0xc0000000, mapped to 0xffffc20010100000, using 4608k, total 16384k > vesafb: mode is 1024x768x24, linelength=3072, pages=6 > vesafb: scrolling: redraw > vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 > Console: switching to colour frame buffer device 128x48 > fb0: VESA VGA frame buffer device > Real Time Clock Driver v1.12ac > Non-volatile memory driver v1.2 > Linux agpgart interface v0.102 > Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled > RAMDISK driver initialized: 16 RAM disks of 128000K size 1024 blocksize > sata_sil 0000:00:12.0: version 2.3 > ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 16 (level, low) -> IRQ 16 > scsi0 : sata_sil > scsi1 : sata_sil > ata1: SATA max UDMA/100 mmio m512@0xd4409000 tf 0xd4409080 irq 16 > ata2: SATA max UDMA/100 mmio m512@0xd4409000 tf 0xd44090c0 irq 16 > ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) > ata1.00: ATA-7: FUJITSU MHV2080BH, 892C, max UDMA/100 > ata1.00: 156301488 sectors, multi 16: LBA48 > ata1.00: configured for UDMA/100 > ata2: SATA link down (SStatus 0 SControl 300) > scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2080B 892C PQ: 0 ANSI: 5 > sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) > sd 0:0:0:0: [sda] Write Protect is off > sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) > sd 0:0:0:0: [sda] Write Protect is off > sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 > > sd 0:0:0:0: [sda] Attached SCSI disk > PNP: PS/2 Controller [PNP0303:C214,PNP0f13:C215] at 0x60,0x64 irq 1,12 > i8042.c: Detected active multiplexing controller, rev 1.1. > serio: i8042 KBD port at 0x60,0x64 irq 1 > serio: i8042 AUX0 port at 0x60,0x64 irq 12 > serio: i8042 AUX1 port at 0x60,0x64 irq 12 > serio: i8042 AUX2 port at 0x60,0x64 irq 12 > serio: i8042 AUX3 port at 0x60,0x64 irq 12 > mice: PS/2 mouse device common for all mice > input: PC Speaker as /class/input/input0 > input: AT Translated Set 2 keyboard as /class/input/input1 > NET: Registered protocol family 1 > swsusp: Resume From Partition /dev/sda1 > PM: Checking swsusp image. > PM: Resume from disk failed. > registered taskstats version 1 > Magic number: 11:322:247 > Freeing unused kernel memory: 252k freed > Write protecting the kernel read-only data: 1124k > sd 0:0:0:0: Attached scsi generic sg0 type 0 > Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx > ATIIXP: IDE controller (0x1002:0x4376 rev 0x80) at PCI slot 0000:00:14.1 > ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16 > ATIIXP: not 100% native mode: will probe irqs later > ide0: BM-DMA at 0x7040-0x7047, BIOS settings: hda:DMA, hdb:pio > ATIIXP: simplex device: DMA disabled > ide1: ATIIXP Bus-Master DMA disabled (BIOS) > Probing IDE interface ide0... > hda: HL-DT-ST DVDRAM GMA-4082N, ATAPI CD/DVD-ROM drive > hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 > hda: selected mode 0x22 > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > Probing IDE interface ide1... > BIOS EDD facility v0.16 2004-Jun-25, 6 devices found > swsusp: Marking nosave pages: 000000000009f000 - 0000000000100000 > swsusp: Basic memory bitmaps created > swsusp: Basic memory bitmaps freed > Attempting manual resume > swsusp: Resume From Partition 8:1 > PM: Checking swsusp image. > PM: Resume from disk failed. > kjournald starting. Commit interval 5 seconds > EXT3 FS on sda3, internal journal > EXT3-fs: mounted filesystem with ordered data mode. > ieee80211_crypt: registered algorithm 'NULL' > ieee80211: 802.11 data/management/control stack, git-1.1.13 > ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com> > Floppy drive(s): fd0 is 1.44M > bcm43xx driver > ACPI: PCI Interrupt 0000:30:00.0[A] -> GSI 18 (level, low) -> IRQ 18 > PCI: Setting latency timer of device 0000:30:00.0 to 64 > bcm43xx: Chip ID 0x4311, rev 0x1 > bcm43xx: Number of cores: 4 > bcm43xx: Core 0: ID 0x800, rev 0x11, vendor 0x4243 > bcm43xx: Core 1: ID 0x812, rev 0xa, vendor 0x4243 > bcm43xx: Core 2: ID 0x817, rev 0x3, vendor 0x4243 > bcm43xx: Core 3: ID 0x820, rev 0x1, vendor 0x4243 > bcm43xx: PHY connected > bcm43xx: Detected PHY: Analog: 4, Type 2, Revision 8 > bcm43xx: Detected Radio: ID: 2205017f (Manuf: 17f Ver: 2050 Rev: 2) > bcm43xx: Radio initialized > bcm43xx: Radio initialized > ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16 > sdhci: Secure Digital Host Controller Interface driver > sdhci: Copyright(c) Pierre Ossman > tg3.c:v3.82 (October 5, 2007) > eth0 renamed to eth1 > sysfs: duplicate filename 'eth1' can not be created > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/fs/sysfs/dir.c:416 sysfs_add_one() > > Call Trace: > [<ffffffff802da54e>] sysfs_add_one+0x5c/0xc9 > [<ffffffff802db415>] sysfs_create_link+0xd1/0x12c > [<ffffffff80382e0a>] device_rename+0x17a/0x1db > [<ffffffff803d6c9d>] dev_change_name+0x13c/0x234 > [<ffffffff803d6f99>] dev_ifsioc+0x204/0x2d0 > [<ffffffff803d7585>] dev_ioctl+0x520/0x633 > [<ffffffff8027ef6a>] handle_mm_fault+0x1f6/0x6e5 > [<ffffffff8030cb16>] __up_read+0x8f/0x97 > [<ffffffff803c9d4d>] sock_ioctl+0x1fe/0x20c > [<ffffffff802a0896>] do_ioctl+0x2a/0x77 > [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e > [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b > [<ffffffff8020bfde>] system_call+0x7e/0x83 > > net eth1: device_rename: sysfs_create_symlink failed (-17) > ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 23 (level, low) -> IRQ 23 > eth0: Tigon3 [partno(BCM95788A50) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000Base-T Ethernet 00:17:08:2e:2e:f3 > eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1] > eth0: dma_rwctrl[763f0000] dma_mask[32-bit] > piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device > sdhci: SDHCI controller found at 0000:02:04.3 [104c:803c] (rev 0) > ACPI: PCI Interrupt 0000:02:04.3[A] -> GSI 20 (level, low) -> IRQ 20 > mmc0: SDHCI at 0xd4019000 irq 20 PIO > usbcore: registered new interface driver usbfs > usbcore: registered new interface driver hub > usbcore: registered new device driver usb > ACPI: PCI Interrupt 0000:02:04.1[A] -> GSI 20 (level, low) -> IRQ 20 > ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[d4011000-d40117ff] Max Packet=[2048] IR/IT contexts=[4/8] > ehci_hcd: block sizes: qh 160 qtd 96 itd 192 sitd 96 > ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 19 > ehci_hcd 0000:00:13.2: EHCI Host Controller > /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file 'devices' > /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '001' > ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1 > ehci_hcd 0000:00:13.2: reset hcs_params 0x2408 dbg=0 cc=2 pcc=4 ordered !ppc ports=8 > ehci_hcd 0000:00:13.2: reset hcc_params a012 thresh 1 uframes 256/512/1024 > ehci_hcd 0000:00:13.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT > ehci_hcd 0000:00:13.2: MWI active > ehci_hcd 0000:00:13.2: irq 19, io mem 0xd4403000 > ehci_hcd 0000:00:13.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT > ehci_hcd 0000:00:13.2: init command 010009 (park)=0 ithresh=1 period=256 RUN > ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 > usb usb1: default language 0x0409 > usb usb1: uevent > usb usb1: usb_probe_device > usb usb1: configuration #1 chosen from 1 choice > usb usb1: adding 1-0:1.0 (config #1, interface 0) > usb 1-0:1.0: uevent > usb 1-0:1.0: uevent > hub 1-0:1.0: usb_probe_interface > hub 1-0:1.0: usb_probe_interface - got id > hub 1-0:1.0: USB hub found > hub 1-0:1.0: 8 ports detected > hub 1-0:1.0: standalone hub > hub 1-0:1.0: no power switching (usb 1.0) > hub 1-0:1.0: individual port over-current protection > hub 1-0:1.0: Single TT > hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns) > hub 1-0:1.0: power on to power good time: 20ms > hub 1-0:1.0: local power source is good > hub 1-0:1.0: trying to enable port power on non-switchable hub > hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, DMA > Uniform CD-ROM driver Revision: 3.20 > ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver > ohci_hcd: block sizes: ed 80 td 96 > pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0000 > /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '001' > usb usb1: new device found, idVendor=0000, idProduct=0000 > ehci_hcd 0000:00:13.2: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT > hub 1-0:1.0: port 2, status 0501, change 0001, 480 Mb/s > usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb1: Product: EHCI Host Controller > usb usb1: Manufacturer: Linux 2.6.23-mm1 ehci_hcd > usb usb1: SerialNumber: 0000:00:13.2 > hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x501 > ACPI: PCI Interrupt 0000:02:04.2[A] -> GSI 20 (level, low) -> IRQ 20 > Yenta: CardBus bridge found at 0000:02:04.0 [103c:30b0] > ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 19 > Yenta: Enabling burst memory read transactions > ohci_hcd 0000:00:13.0: OHCI Host Controller > /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '002' > ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 > ohci_hcd 0000:00:13.0: created debug files > ohci_hcd 0000:00:13.0: irq 19, io mem 0xd4401000 > Yenta: Using INTVAL to route CSC interrupts to PCI > Yenta: Routing CardBus interrupts to PCI > Yenta TI: socket 0000:02:04.0, mfunc 0x01a11002, devctl 0x64 > ehci_hcd 0000:00:13.2: port 2 full speed --> companion > ehci_hcd 0000:00:13.2: GetStatus port 2 status 003801 POWER OWNER sig=j CONNECT > hub 1-0:1.0: port 2 not reset yet, waiting 50ms > ohci_hcd 0000:00:13.0: OHCI controller state > ohci_hcd 0000:00:13.0: OHCI 1.0, NO legacy support registers > ohci_hcd 0000:00:13.0: control 0x083 HCFS=operational CBSR=3 > ohci_hcd 0000:00:13.0: cmdstatus 0x00000 SOC=0 > ohci_hcd 0000:00:13.0: intrstatus 0x00000004 SF > ohci_hcd 0000:00:13.0: intrenable 0x8000005a MIE RHSC UE RD WDH > ohci_hcd 0000:00:13.0: hcca frame #0005 > ohci_hcd 0000:00:13.0: roothub.a 02000204 POTPGT=2 NPS NDP=4(4) > ohci_hcd 0000:00:13.0: roothub.b 00000000 PPCM=0000 DR=0000 > ohci_hcd 0000:00:13.0: roothub.status 00008000 DRWE > ohci_hcd 0000:00:13.0: roothub.portstatus [0] 0x00000100 PPS > ohci_hcd 0000:00:13.0: roothub.portstatus [1] 0x00010100 CSC PPS > ohci_hcd 0000:00:13.0: roothub.portstatus [2] 0x00000100 PPS > ohci_hcd 0000:00:13.0: roothub.portstatus [3] 0x00000100 PPS > usb usb2: default language 0x0409 > usb usb2: uevent > usb usb2: usb_probe_device > usb usb2: configuration #1 chosen from 1 choice > ehci_hcd 0000:00:13.2: GetStatus port 2 status 003002 POWER OWNER sig=se0 CSC > ehci_hcd 0000:00:13.2: GetStatus port 3 status 001803 POWER sig=j CSC CONNECT > hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s > usb usb2: adding 2-0:1.0 (config #1, interface 0) > usb 2-0:1.0: uevent > usb 2-0:1.0: uevent > hub 2-0:1.0: usb_probe_interface > hub 2-0:1.0: usb_probe_interface - got id > hub 2-0:1.0: USB hub found > hub 2-0:1.0: 4 ports detected > hub 2-0:1.0: standalone hub > hub 2-0:1.0: no power switching (usb 1.0) > hub 2-0:1.0: global over-current protection > hub 2-0:1.0: power on to power good time: 4ms > hub 2-0:1.0: local power source is good > hub 2-0:1.0: no over-current condition exists > hub 2-0:1.0: trying to enable port power on non-switchable hub > rtc_cmos: probe of 00:07 failed with error -16 > hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x501 > Yenta: ISA IRQ mask 0x0eb8, PCI irq 20 > ehci_hcd 0000:00:13.2: port 3 full speed --> companion > ehci_hcd 0000:00:13.2: GetStatus port 3 status 003801 POWER OWNER sig=j CONNECT > hub 1-0:1.0: port 3 not reset yet, waiting 50ms > Socket status: 30000006 > /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '001' > usb usb2: new device found, idVendor=0000, idProduct=0000 > usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb2: Product: OHCI Host Controller > usb usb2: Manufacturer: Linux 2.6.23-mm1 ohci_hcd > usb usb2: SerialNumber: 0000:00:13.0 > ehci_hcd 0000:00:13.2: GetStatus port 3 status 003002 POWER OWNER sig=se0 CSC > ehci_hcd 0000:00:13.2: GetStatus port 6 status 001403 POWER sig=k CSC CONNECT > hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s > Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06 > hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501 > ehci_hcd 0000:00:13.2: port 6 low speed --> companion > pcmcia: parent PCI bridge Memory window: 0xd4000000 - 0xd42fffff > shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 > ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 19 > ohci_hcd 0000:00:13.1: OHCI Host Controller > ehci_hcd 0000:00:13.2: GetStatus port 6 status 003002 POWER OWNER sig=se0 CSC > hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0040 > hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0004 > ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [1] = 0x00010101 CSC PPS CCS > hub 2-0:1.0: port 2, status 0101, change 0001, 12 Mb/s > /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '003' > ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 > ohci_hcd 0000:00:13.1: created debug files > ohci_hcd 0000:00:13.1: irq 19, io mem 0xd4402000 > hub 2-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101 > ohci_hcd 0000:00:13.1: OHCI controller state > ohci_hcd 0000:00:13.1: OHCI 1.0, NO legacy support registers > ohci_hcd 0000:00:13.1: control 0x083 HCFS=operational CBSR=3 > ohci_hcd 0000:00:13.1: cmdstatus 0x00000 SOC=0 > ohci_hcd 0000:00:13.1: intrstatus 0x00000004 SF > ohci_hcd 0000:00:13.1: intrenable 0x8000005a MIE RHSC UE RD WDH > ohci_hcd 0000:00:13.1: hcca frame #0005 > ohci_hcd 0000:00:13.1: roothub.a 02000204 POTPGT=2 NPS NDP=4(4) > ohci_hcd 0000:00:13.1: roothub.b 00000000 PPCM=0000 DR=0000 > ohci_hcd 0000:00:13.1: roothub.status 00008000 DRWE > ohci_hcd 0000:00:13.1: roothub.portstatus [0] 0x00010100 CSC PPS > ohci_hcd 0000:00:13.1: roothub.portstatus [1] 0x00000100 PPS > ohci_hcd 0000:00:13.1: roothub.portstatus [2] 0x00010100 CSC PPS > ohci_hcd 0000:00:13.1: roothub.portstatus [3] 0x00000100 PPS > usb usb3: default language 0x0409 > usb usb3: uevent > usb usb3: usb_probe_device > usb usb3: configuration #1 chosen from 1 choice > usb usb3: adding 3-0:1.0 (config #1, interface 0) > usb 3-0:1.0: uevent > usb 3-0:1.0: uevent > hub 3-0:1.0: usb_probe_interface > hub 3-0:1.0: usb_probe_interface - got id > hub 3-0:1.0: USB hub found > hub 3-0:1.0: 4 ports detected > hub 3-0:1.0: standalone hub > hub 3-0:1.0: no power switching (usb 1.0) > hub 3-0:1.0: global over-current protection > hub 3-0:1.0: power on to power good time: 4ms > hub 3-0:1.0: local power source is good > hub 3-0:1.0: no over-current condition exists > hub 3-0:1.0: trying to enable port power on non-switchable hub > ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS > ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f9929613f0c] > usb 2-2: new full speed USB device using ohci_hcd and address 2 > /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '001' > usb usb3: new device found, idVendor=0000, idProduct=0000 > usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb3: Product: OHCI Host Controller > usb usb3: Manufacturer: Linux 2.6.23-mm1 ohci_hcd > usb usb3: SerialNumber: 0000:00:13.1 > ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS > usb 2-2: skipped 1 descriptor after interface > usb 2-2: default language 0x0409 > usb 2-2: uevent > usb 2-2: usb_probe_device > usb 2-2: configuration #1 chosen from 1 choice > usb 2-2: adding 2-2:1.0 (config #1, interface 0) > usb 2-2:1.0: uevent > usb 2-2:1.0: uevent > usb 2-2: adding 2-2:1.1 (config #1, interface 1) > usb 2-2:1.1: uevent > usb 2-2:1.1: uevent > usb 2-2: adding 2-2:1.2 (config #1, interface 2) > usb 2-2:1.2: uevent > usb 2-2:1.2: uevent > usb 2-2: adding 2-2:1.3 (config #1, interface 3) > usb 2-2:1.3: uevent > usb 2-2:1.3: uevent > /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '002' > usb 2-2: new device found, idVendor=03f0, idProduct=171d > usb 2-2: new device strings: Mfr=1, Product=2, SerialNumber=0 > usb 2-2: Product: HP Integrated Module > usb 2-2: Manufacturer: Broadcom Corp > floppy0: no floppy controllers found > hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0044 > ehci_hcd 0000:00:13.2: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT > hub 1-0:1.0: port 2, status 0501, change 0001, 480 Mb/s > Bluetooth: Core ver 2.11 > NET: Registered protocol family 31 > Bluetooth: HCI device and connection manager initialized > Bluetooth: HCI socket layer initialized > hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x501 > Bluetooth: HCI USB driver ver 2.9 > ehci_hcd 0000:00:13.2: port 2 full speed --> companion > ehci_hcd 0000:00:13.2: GetStatus port 2 status 003801 POWER OWNER sig=j CONNECT > hub 1-0:1.0: port 2 not reset yet, waiting 50ms > ehci_hcd 0000:00:13.2: GetStatus port 2 status 003002 POWER OWNER sig=se0 CSC > ehci_hcd 0000:00:13.2: GetStatus port 6 status 001403 POWER sig=k CSC CONNECT > hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s > hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501 > ehci_hcd 0000:00:13.2: port 6 low speed --> companion > ehci_hcd 0000:00:13.2: GetStatus port 6 status 003002 POWER OWNER sig=se0 CSC > hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0004 > hub 3-0:1.0: state 7 ports 4 chg 0000 evt 000a > ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [0] = 0x00010101 CSC PPS CCS > hci_usb 2-2:1.0: usb_probe_interface > hci_usb 2-2:1.0: usb_probe_interface - got id > hub 3-0:1.0: port 1, status 0101, change 0001, 12 Mb/s > hci_usb 2-2:1.2: usb_probe_interface > hci_usb 2-2:1.2: usb_probe_interface - got id > hci_usb 2-2:1.3: usb_probe_interface > hci_usb 2-2:1.3: usb_probe_interface - got id > usbcore: registered new interface driver hci_usb > hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 > ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS > Bluetooth: L2CAP ver 2.8 > Bluetooth: L2CAP socket layer initialized > usb 3-1: new full speed USB device using ohci_hcd and address 2 > Bluetooth: HIDP (Human Interface Emulation) ver 1.2 > ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS > Bluetooth: RFCOMM socket layer initialized > usb 3-1: ep0 maxpacket = 8 > Bluetooth: RFCOMM TTY layer initialized > Bluetooth: RFCOMM ver 1.8 > usb 3-1: default language 0x0409 > usb 3-1: uevent > usb 3-1: usb_probe_device > usb 3-1: configuration #1 chosen from 1 choice > usb 3-1: adding 3-1:1.0 (config #1, interface 0) > usb 3-1:1.0: uevent > usb 3-1:1.0: uevent > /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '002' > usb 3-1: new device found, idVendor=08ff, idProduct=2580 > usb 3-1: new device strings: Mfr=0, Product=1, SerialNumber=0 > usb 3-1: Product: Fingerprint Sensor > ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [2] = 0x00010301 CSC LSDA PPS CCS > hub 3-0:1.0: port 3, status 0301, change 0001, 1.5 Mb/s > hub 3-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x301 > ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [2] = 0x00100303 PRSC LSDA PPS PES CCS > usb 3-3: new low speed USB device using ohci_hcd and address 3 > ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [2] = 0x00100303 PRSC LSDA PPS PES CCS > usb 3-3: skipped 1 descriptor after interface > usb 3-3: skipped 1 descriptor after interface > usb 3-3: default language 0x0409 > usb 3-3: uevent > usb 3-3: usb_probe_device > usb 3-3: configuration #1 chosen from 1 choice > usb 3-3: adding 3-3:1.0 (config #1, interface 0) > usb 3-3:1.0: uevent > usb 3-3:1.0: uevent > usb 3-3: adding 3-3:1.1 (config #1, interface 1) > usb 3-3:1.1: uevent > usb 3-3:1.1: uevent > /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '003' > usb 3-3: new device found, idVendor=046d, idProduct=c521 > usb 3-3: new device strings: Mfr=1, Product=2, SerialNumber=0 > usb 3-3: Product: USB Receiver > usb 3-3: Manufacturer: Logitech > hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0040 > hub 3-0:1.0: state 7 ports 4 chg 0000 evt 0000 > usbcore: registered new interface driver hiddev > usbhid 3-3:1.0: usb_probe_interface > usbhid 3-3:1.0: usb_probe_interface - got id > input: Logitech USB Receiver as /class/input/input2 > input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:13.1-3 > usbhid 3-3:1.1: usb_probe_interface > usbhid 3-3:1.1: usb_probe_interface - got id > input: Logitech USB Receiver as /class/input/input3 > /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/file.c: looking for a minor, starting at 96 > input,hiddev96: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:13.1-3 > usbcore: registered new interface driver usbhid > /home/rafael/src/mm/linux-2.6.23-mm1/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver > Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04793/0x300000 > serio: Synaptics pass-through port at isa0060/serio4/input0 > input: SynPS/2 Synaptics TouchPad as /class/input/input4 > device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com > hub 1-0:1.0: hub_suspend > usb usb1: bus auto-suspend > ehci_hcd 0000:00:13.2: suspend root hub > loop: module loaded > kjournald starting. Commit interval 5 seconds > EXT3 FS on sda2, internal journal > EXT3-fs: mounted filesystem with ordered data mode. > kjournald starting. Commit interval 5 seconds > EXT3 FS on sda7, internal journal > EXT3-fs: mounted filesystem with ordered data mode. > kjournald starting. Commit interval 5 seconds > EXT3 FS on sda8, internal journal > EXT3-fs: mounted filesystem with ordered data mode. > kjournald starting. Commit interval 5 seconds > EXT3 FS on sda5, internal journal > EXT3-fs: mounted filesystem with ordered data mode. > kjournald starting. Commit interval 5 seconds > EXT3 FS on sda6, internal journal > EXT3-fs: mounted filesystem with ordered data mode. > Floppy drive(s): fd0 is 1.44M > floppy0: no floppy controllers found > Adding 1052216k swap on /dev/sda1. Priority:-1 extents:1 across:1052216k > NET: Registered protocol family 10 > lo: Disabled Privacy Extensions > ip6_tables: (C) 2000-2006 Netfilter Core Team > ip_tables: (C) 2000-2006 Netfilter Core Team > nf_conntrack version 0.5.0 (16384 buckets, 65536 max) > ACPI: AC Adapter [C1BD] (on-line) > ACPI: Battery Slot [C1BF] (battery present) > ACPI: Battery Slot [C1BE] (battery absent) > input: Power Button (FF) as /class/input/input5 > ACPI: Power Button (FF) [PWRF] > input: Sleep Button (CM) as /class/input/input6 > ACPI: Sleep Button (CM) [C25A] > input: Lid Switch as /class/input/input7 > ACPI: Lid Switch [C25B] > ACPI: Transitioning device [C34F] to D3 > ACPI: Transitioning device [C34F] to D3 > ACPI: Fan [C34F] (off) > ACPI: Transitioning device [C350] to D3 > ACPI: Transitioning device [C350] to D3 > ACPI: Fan [C350] (off) > ACPI: Transitioning device [C351] to D3 > ACPI: Transitioning device [C351] to D3 > ACPI: Fan [C351] (off) > ACPI: Transitioning device [C352] to D3 > ACPI: Transitioning device [C352] to D3 > ACPI: Fan [C352] (off) > ACPI: Processor [C000] (supports 8 throttling states) > ACPI: Processor [C001] (supports 8 throttling states) > ACPI: Thermal Zone [TZ1] (62 C) > ACPI: Thermal Zone [TZ2] (52 C) > ACPI: Thermal Zone [TZ3] (32 C) > powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-60 processors (2 cpu cores) (version 2.00.00) > powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x13 > powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x15 > powernow-k8: 2 : fid 0x8 (1600 MHz), vid 0x17 > powernow-k8: 3 : fid 0x0 (800 MHz), vid 0x1e > powernow-k8: ph2 null fid transition 0xc > mtrr: no more MTRRs available > APIC error on CPU1: 00(40) > APIC error on CPU0: 00(40) > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() > > Call Trace: > [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 > [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 > [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 > [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 > [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 > [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2 > [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 > [<ffffffff8024ee6d>] update_target+0x71/0x76 > [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2 > [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382 > [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc > [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 > [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f > [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 > [<ffffffff80270cbe>] find_lock_page+0x2a/0xa6 > [<ffffffff80272bce>] filemap_fault+0x1d3/0x35b > [<ffffffff80270bab>] unlock_page+0x2d/0x31 > [<ffffffff8027d6ec>] __do_fault+0x38e/0x3c4 > [<ffffffff8027ef6a>] handle_mm_fault+0x1f6/0x6e5 > [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a > [<ffffffff8024e56b>] up_read+0x9/0xb > [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 > [<ffffffff802a0896>] do_ioctl+0x2a/0x77 > [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e > [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b > [<ffffffff8020bfde>] system_call+0x7e/0x83 > > hda-intel: Invalid position buffer, using LPIB read method instead. > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() > > Call Trace: > [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9 > [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 > [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 > [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 > [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 > [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 > [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 > [<ffffffff8024ee6d>] update_target+0x71/0x76 > [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0 > [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382 > [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc > [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 > [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f > [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 > [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 > [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 > [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 > [<ffffffff8022f18e>] default_wake_function+0x0/0xf > [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 > [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 > [<ffffffff80282e91>] vma_link+0xdd/0x10b > [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a > [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 > [<ffffffff802a0896>] do_ioctl+0x2a/0x77 > [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e > [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b > [<ffffffff8020bfde>] system_call+0x7e/0x83 > > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() > > Call Trace: > [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82 > [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 > [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 > [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 > [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 > [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 > [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2 > [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 > [<ffffffff8024ee6d>] update_target+0x71/0x76 > [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2 > [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382 > [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc > [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 > [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f > [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 > [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 > [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 > [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 > [<ffffffff8022f18e>] default_wake_function+0x0/0xf > [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 > [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 > [<ffffffff80282e91>] vma_link+0xdd/0x10b > [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a > [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 > [<ffffffff802a0896>] do_ioctl+0x2a/0x77 > [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e > [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b > [<ffffffff8020bfde>] system_call+0x7e/0x83 > > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() > > Call Trace: > [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9 > [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 > [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 > [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 > [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 > [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 > [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 > [<ffffffff8024ee6d>] update_target+0x71/0x76 > [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0 > [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382 > [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc > [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 > [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f > [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 > [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 > [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 > [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 > [<ffffffff8022f18e>] default_wake_function+0x0/0xf > [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 > [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 > [<ffffffff80282e91>] vma_link+0xdd/0x10b > [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a > [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 > [<ffffffff802a0896>] do_ioctl+0x2a/0x77 > [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e > [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b > [<ffffffff8020bfde>] system_call+0x7e/0x83 > > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() > > Call Trace: > [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 > [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 > [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 > [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 > [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 > [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2 > [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 > [<ffffffff8024ee6d>] update_target+0x71/0x76 > [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2 > [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382 > [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc > [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 > [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f > [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 > [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 > [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 > [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 > [<ffffffff8022f18e>] default_wake_function+0x0/0xf > [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 > [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 > [<ffffffff80282e91>] vma_link+0xdd/0x10b > [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a > [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 > [<ffffffff802a0896>] do_ioctl+0x2a/0x77 > [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e > [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b > [<ffffffff8020bfde>] system_call+0x7e/0x83 > > ACPI: PCI interrupt for device 0000:30:00.0 disabled > bcm43xx driver > ACPI: PCI Interrupt 0000:30:00.0[A] -> GSI 18 (level, low) -> IRQ 18 > PCI: Setting latency timer of device 0000:30:00.0 to 64 > bcm43xx: Chip ID 0x4311, rev 0x1 > bcm43xx: Number of cores: 4 > bcm43xx: Core 0: ID 0x800, rev 0x11, vendor 0x4243 > bcm43xx: Core 1: ID 0x812, rev 0xa, vendor 0x4243 > bcm43xx: Core 2: ID 0x817, rev 0x3, vendor 0x4243 > bcm43xx: Core 3: ID 0x820, rev 0x1, vendor 0x4243 > bcm43xx: PHY connected > bcm43xx: Detected PHY: Analog: 4, Type 2, Revision 8 > bcm43xx: Detected Radio: ID: 2205017f (Manuf: 17f Ver: 2050 Rev: 2) > bcm43xx: Radio initialized > bcm43xx: Radio initialized > bcm43xx: PHY connected > bcm43xx: Microcode rev 0x127, pl 0xe (2005-04-18 02:36:27) > bcm43xx: Radio turned on > bcm43xx: Radio enabled by hardware > bcm43xx: Chip initialized > bcm43xx: 32-bit DMA initialized > bcm43xx: Keys cleared > bcm43xx: Selected 802.11 core (phytype 2) > ADDRCONF(NETDEV_UP): eth1: link is not ready > SoftMAC: Scanning finished: scanned 13 channels starting with channel 1 > SoftMAC: Associate: Scanning for networks first. > SoftMAC: Scanning finished: scanned 13 channels starting with channel 1 > SoftMAC: Queueing Authentication Request to 00:17:9a:f3:b5:75 > SoftMAC: Cannot associate without being authenticated, requested authentication > SoftMAC: Sent Authentication Request to 00:17:9a:f3:b5:75. > SoftMAC: Open Authentication completed with 00:17:9a:f3:b5:75 > SoftMAC: sent association request! > SoftMAC: associated! > ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready > SFW2-OUT-ERROR IN= OUT=eth1 SRC=0000:0000:0000:0000:0000:0000:0000:0000 DST=ff02:0000:0000:0000:0000:0000:0000:0016 LEN=76 TC=0 HOPLIMIT=1 FLOWLBL=0 OPT ( ) PROTO=ICMPv6 TYPE=143 CODE=0 > SoftMAC: Getting essid from req_essid > SFW2-OUT-ERROR IN= OUT=eth1 SRC=0000:0000:0000:0000:0000:0000:0000:0000 DST=ff02:0000:0000:0000:0000:0001:ffbe:9531 LEN=64 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=ICMPv6 TYPE=135 CODE=0 > NET: Registered protocol family 17 > SoftMAC: Getting essid from req_essid > SFW2-OUT-ERROR IN= OUT=eth1 SRC=fe80:0000:0000:0000:0214:a5ff:febe:9531 DST=ff02:0000:0000:0000:0000:0000:0000:0002 LEN=56 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=ICMPv6 TYPE=133 CODE=0 > SoftMAC: Getting essid from req_essid > SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:17:9a:f3:b5:75:08:00 SRC=62.121.83.254 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=7883 PROTO=2 > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SFW2-OUT-ERROR IN= OUT=eth1 SRC=fe80:0000:0000:0000:0214:a5ff:febe:9531 DST=ff02:0000:0000:0000:0000:0000:0000:0002 LEN=56 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=ICMPv6 TYPE=133 CODE=0 > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SFW2-OUT-ERROR IN= OUT=eth1 SRC=fe80:0000:0000:0000:0214:a5ff:febe:9531 DST=ff02:0000:0000:0000:0000:0000:0000:0002 LEN=56 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=ICMPv6 TYPE=133 CODE=0 > SFW2-OUT-ERROR IN= OUT=eth1 SRC=fe80:0000:0000:0000:0214:a5ff:febe:9531 DST=ff02:0000:0000:0000:0000:0000:0000:0016 LEN=76 TC=0 HOPLIMIT=1 FLOWLBL=0 OPT ( ) PROTO=ICMPv6 TYPE=143 CODE=0 > SoftMAC: Getting essid from req_essid > eth1: no IPv6 routers present > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > bcm43xx: Radio initialized > bcm43xx: DMA-32 0x0200 (RX) max used slots: 1/64 > bcm43xx: DMA-32 0x02A0 (TX) max used slots: 0/512 > bcm43xx: DMA-32 0x0280 (TX) max used slots: 0/512 > bcm43xx: DMA-32 0x0260 (TX) max used slots: 0/512 > bcm43xx: DMA-32 0x0240 (TX) max used slots: 0/512 > bcm43xx: DMA-32 0x0220 (TX) max used slots: 2/512 > bcm43xx: DMA-32 0x0200 (TX) max used slots: 0/512 > ACPI: PCI interrupt for device 0000:30:00.0 disabled > Syncing filesystems ... done. > PM: Preparing system for mem sleep > Freezing user space processes ... (elapsed 0.00 seconds) done. > Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. > PM: Entering mem sleep > Suspending device vcsa10 > Suspending device vcs10 > Suspending device vcsa4 > Suspending device vcs4 > Suspending device vcsa2 > Suspending device vcs2 > Suspending device vcsa6 > Suspending device vcs6 > Suspending device vcsa5 > Suspending device vcs5 > Suspending device vcsa3 > Suspending device vcs3 > Suspending device vcsa7 > Suspending device vcs7 > Suspending device audio > Suspending device dsp > Suspending device mixer > Suspending device event7 > Suspending device input7 > Suspending device event6 > Suspending device input6 > Suspending device event5 > Suspending device input5 > Suspending device seq > Suspending device C1BE > Suspending device C1BF > Suspending device C1BD > Suspending device device-mapper > Suspending device serio5 > Suspending device event4 > Suspending device mouse1 > Suspending device input4 > Suspending device hiddev0 > Suspending device event3 > Suspending device input3 > Suspending device event2 > Suspending device mouse0 > Suspending device input2 > Suspending device usbdev3.3 > Suspending device usbdev3.3_ep82 > Suspending device 3-3:1.1 > Suspending device usbdev3.3_ep81 > Suspending device 3-3:1.0 > Suspending device usbdev3.3_ep00 > Suspending device 3-3 > usb 3-3: usb suspend > Suspending device usbdev3.2 > Suspending device usbdev3.2_ep02 > Suspending device usbdev3.2_ep81 > Suspending device 3-1:1.0 > Suspending device usbdev3.2_ep00 > Suspending device 3-1 > usb 3-1: usb suspend > Suspending device hci0 > Suspending device usbdev2.2_ep03 > Suspending device usbdev2.2_ep83 > Suspending device bluetooth > Suspending device usbdev2.2 > Suspending device 2-2:1.3 > Suspending device usbdev2.2_ep04 > Suspending device usbdev2.2_ep84 > Suspending device 2-2:1.2 > Suspending device 2-2:1.1 > Suspending device usbdev2.2_ep02 > Suspending device usbdev2.2_ep82 > Suspending device usbdev2.2_ep81 > Suspending device 2-2:1.0 > Suspending device usbdev2.2_ep00 > Suspending device 2-2 > usb 2-2: usb suspend > Suspending device usbdev3.1 > Suspending device usbdev3.1_ep81 > Suspending device 00023f9929613f0c > Suspending device 00023f9929613f0c > Suspending device 3-0:1.0 > Suspending device usbdev3.1_ep00 > Suspending device usb3 > hub 3-0:1.0: hub_suspend > usb usb3: bus suspend > ohci_hcd 0000:00:13.1: suspend root hub > Suspending device pcmcia_socket0 > Suspending device usbdev2.1 > Suspending device usbdev2.1_ep81 > Suspending device 2-0:1.0 > Suspending device usbdev2.1_ep00 > Suspending device usb2 > hub 2-0:1.0: hub_suspend > usb usb2: bus suspend > ohci_hcd 0000:00:13.0: suspend root hub > Suspending device hwmon0 > Suspending device usbdev1.1 > Suspending device usbdev1.1_ep81 > Suspending device 1-0:1.0 > Suspending device usbdev1.1_ep00 > Suspending device usb1 > Suspending device fw-host0 > Suspending device fw-host0 > Suspending device mmc0 > Suspending device i2c-0 > Suspending device eth0 > Suspending device controlC0 > Suspending device hwC0D0 > Suspending device hwC0D1 > Suspending device pcmC0D0c > Suspending device pcmC0D0p > Suspending device timer > Suspending device vcsa1 > Suspending device vcs1 > Suspending device 0.0 > Suspending device ide0 > Suspending device network_throughput > Suspending device network_latency > Suspending device cpu_dma_latency > Suspending device event1 > Suspending device event0 > Suspending device input1 > Suspending device input0 > Suspending device psaux > Suspending device mice > Suspending device serio4 > Suspending device serio3 > Suspending device serio2 > Suspending device serio1 > Suspending device serio0 > Suspending device i8042 > Suspending device 0:0:0:0 > sd 0:0:0:0: [sda] Synchronizing SCSI cache > sd 0:0:0:0: [sda] Stopping disk > Suspending device target0:0:0 > Suspending device host1 > Suspending device host0 > Suspending device ttyS3 > Suspending device ttyS2 > Suspending device ttyS1 > Suspending device ttyS0 > Suspending device serial8250 > Suspending device nvram > Suspending device hpet > Suspending device rtc > Suspending device ttysf > Suspending device ttyse > Suspending device ttysd > Suspending device ttysc > Suspending device ttysb > Suspending device ttysa > Suspending device ttys9 > Suspending device ttys8 > Suspending device ttys7 > Suspending device ttys6 > Suspending device ttys5 > Suspending device ttys4 > Suspending device ttys3 > Suspending device ttys2 > Suspending device ttys1 > Suspending device ttys0 > Suspending device ttyrf > Suspending device ttyre > Suspending device ttyrd > Suspending device ttyrc > Suspending device ttyrb > Suspending device ttyra > Suspending device ttyr9 > Suspending device ttyr8 > Suspending device ttyr7 > Suspending device ttyr6 > Suspending device ttyr5 > Suspending device ttyr4 > Suspending device ttyr3 > Suspending device ttyr2 > Suspending device ttyr1 > Suspending device ttyr0 > Suspending device ttyqf > Suspending device ttyqe > Suspending device ttyqd > Suspending device ttyqc > Suspending device ttyqb > Suspending device ttyqa > Suspending device ttyq9 > Suspending device ttyq8 > Suspending device ttyq7 > Suspending device ttyq6 > Suspending device ttyq5 > Suspending device ttyq4 > Suspending device ttyq3 > Suspending device ttyq2 > Suspending device ttyq1 > Suspending device ttyq0 > Suspending device ttypf > Suspending device ttype > Suspending device ttypd > Suspending device ttypc > Suspending device ttypb > Suspending device ttypa > Suspending device ttyp9 > Suspending device ttyp8 > Suspending device ttyp7 > Suspending device ttyp6 > Suspending device ttyp5 > Suspending device ttyp4 > Suspending device ttyp3 > Suspending device ttyp2 > Suspending device ttyp1 > Suspending device ttyp0 > Suspending device ptysf > Suspending device ptyse > Suspending device ptysd > Suspending device ptysc > Suspending device ptysb > Suspending device ptysa > Suspending device ptys9 > Suspending device ptys8 > Suspending device ptys7 > Suspending device ptys6 > Suspending device ptys5 > Suspending device ptys4 > Suspending device ptys3 > Suspending device ptys2 > Suspending device ptys1 > Suspending device ptys0 > Suspending device ptyrf > Suspending device ptyre > Suspending device ptyrd > Suspending device ptyrc > Suspending device ptyrb > Suspending device ptyra > Suspending device ptyr9 > Suspending device ptyr8 > Suspending device ptyr7 > Suspending device ptyr6 > Suspending device ptyr5 > Suspending device ptyr4 > Suspending device ptyr3 > Suspending device ptyr2 > Suspending device ptyr1 > Suspending device ptyr0 > Suspending device ptyqf > Suspending device ptyqe > Suspending device ptyqd > Suspending device ptyqc > Suspending device ptyqb > Suspending device ptyqa > Suspending device ptyq9 > Suspending device ptyq8 > Suspending device ptyq7 > Suspending device ptyq6 > Suspending device ptyq5 > Suspending device ptyq4 > Suspending device ptyq3 > Suspending device ptyq2 > Suspending device ptyq1 > Suspending device ptyq0 > Suspending device ptypf > Suspending device ptype > Suspending device ptypd > Suspending device ptypc > Suspending device ptypb > Suspending device ptypa > Suspending device ptyp9 > Suspending device ptyp8 > Suspending device ptyp7 > Suspending device ptyp6 > Suspending device ptyp5 > Suspending device ptyp4 > Suspending device ptyp3 > Suspending device ptyp2 > Suspending device ptyp1 > Suspending device ptyp0 > Suspending device tty63 > Suspending device tty62 > Suspending device tty61 > Suspending device tty60 > Suspending device tty59 > Suspending device tty58 > Suspending device tty57 > Suspending device tty56 > Suspending device tty55 > Suspending device tty54 > Suspending device tty53 > Suspending device tty52 > Suspending device tty51 > Suspending device tty50 > Suspending device tty49 > Suspending device tty48 > Suspending device tty47 > Suspending device tty46 > Suspending device tty45 > Suspending device tty44 > Suspending device tty43 > Suspending device tty42 > Suspending device tty41 > Suspending device tty40 > Suspending device tty39 > Suspending device tty38 > Suspending device tty37 > Suspending device tty36 > Suspending device tty35 > Suspending device tty34 > Suspending device tty33 > Suspending device tty32 > Suspending device tty31 > Suspending device tty30 > Suspending device tty29 > Suspending device tty28 > Suspending device tty27 > Suspending device tty26 > Suspending device tty25 > Suspending device tty24 > Suspending device tty23 > Suspending device tty22 > Suspending device tty21 > Suspending device tty20 > Suspending device tty19 > Suspending device tty18 > Suspending device tty17 > Suspending device tty16 > Suspending device tty15 > Suspending device tty14 > Suspending device tty13 > Suspending device tty12 > Suspending device tty11 > Suspending device tty10 > Suspending device tty9 > Suspending device tty8 > Suspending device tty7 > Suspending device tty6 > Suspending device tty5 > Suspending device tty4 > Suspending device tty3 > Suspending device tty2 > Suspending device tty1 > Suspending device vcsa > Suspending device vcs > Suspending device tty0 > Suspending device ptmx > Suspending device console > Suspending device tty > Suspending device vtcon1 > Suspending device fb0 > Suspending device vesafb.0 > Suspending device fbcon > Suspending device 0000:00:06.0:pcie03 > Suspending device 0000:00:06.0:pcie01 > Suspending device 0000:00:06.0:pcie00 > Suspending device 0000:00:05.0:pcie03 > Suspending device 0000:00:05.0:pcie01 > Suspending device 0000:00:05.0:pcie00 > Suspending device 0000:00:04.0:pcie03 > Suspending device 0000:00:04.0:pcie01 > Suspending device 0000:00:04.0:pcie00 > Suspending device snapshot > Suspending device pcspkr > Suspending device mcelog > Suspending device lo > Suspending device kmsg > Suspending device urandom > Suspending device random > Suspending device full > Suspending device zero > Suspending device port > Suspending device null > Suspending device kmem > Suspending device mem > Suspending device 00:0c > ACPI handle has no context! > Suspending device 00:0b > Suspending device 00:0a > Suspending device 00:09 > Suspending device 00:08 > Suspending device 00:07 > Suspending device 00:06 > Suspending device 00:05 > Suspending device 00:04 > Suspending device 00:03 > Suspending device 00:02 > Suspending device 00:01 > Suspending device 00:00 > Suspending device pnp0 > Suspending device 0000:02 > Suspending device 0000:03 > Suspending device 0000:02:04.3 > ACPI handle has no context! > ACPI: PCI interrupt for device 0000:02:04.3 disabled > ACPI handle has no context! > Suspending device 0000:02:04.2 > ACPI handle has no context! > ACPI: PCI interrupt for device 0000:02:04.2 disabled > ACPI handle has no context! > Suspending device 0000:02:04.1 > ACPI handle has no context! > Suspending device 0000:02:04.0 > Suspending device 0000:02:01.0 > Suspending device 0000:30 > Suspending device 0000:30:00.0 > Suspending device 0000:20 > Suspending device 0000:10 > Suspending device 0000:01 > Suspending device 0000:01:05.0 > Suspending device 0000:00:18.3 > Suspending device 0000:00:18.2 > Suspending device 0000:00:18.1 > Suspending device 0000:00:18.0 > Suspending device 0000:00:14.4 > Suspending device 0000:00:14.3 > Suspending device 0000:00:14.2 > ACPI: PCI interrupt for device 0000:00:14.2 disabled > Suspending device 0000:00:14.1 > Suspending device 0000:00:14.0 > Suspending device 0000:00:13.2 > ACPI: PCI interrupt for device 0000:00:13.2 disabled > ehci_hcd 0000:00:13.2: --> PCI D3 > Suspending device 0000:00:13.1 > ACPI: PCI interrupt for device 0000:00:13.1 disabled > ohci_hcd 0000:00:13.1: --> PCI D0/legacy > Suspending device 0000:00:13.0 > ACPI: PCI interrupt for device 0000:00:13.0 disabled > ohci_hcd 0000:00:13.0: --> PCI D0/legacy > Suspending device 0000:00:12.0 > ACPI: PCI interrupt for device 0000:00:12.0 disabled > Suspending device 0000:00:06.0 > Suspending device 0000:00:05.0 > Suspending device 0000:00:04.0 > Suspending device 0000:00:01.0 > Suspending device 0000:00:00.0 > Suspending device 0000:00 > Suspending device pci0000:00 > Suspending device LNXTHERM:03 > Suspending device LNXTHERM:02 > Suspending device LNXTHERM:01 > Suspending device PNP0C0B:03 > Suspending device PNP0C0B:02 > ACPI: Transitioning device [C351] to D0 > ACPI: Transitioning device [C351] to D0 > Suspending device PNP0C0B:01 > ACPI: Transitioning device [C350] to D0 > ACPI: Transitioning device [C350] to D0 > Suspending device PNP0C0B:00 > ACPI: Transitioning device [C34F] to D0 > ACPI: Transitioning device [C34F] to D0 > Suspending device LNXPOWER:06 > Suspending device LNXPOWER:05 > Suspending device LNXPOWER:04 > Suspending device LNXPOWER:03 > Suspending device LNXTHERM:00 > Suspending device PNP0C02:02 > Suspending device PNP0C14:00 > Suspending device PNP0C0D:00 > Suspending device PNP0C0E:00 > Suspending device ACPI0003:00 > Suspending device PNP0C0A:01 > Suspending device PNP0C0A:00 > Suspending device HPQ0006:00 > Suspending device PNP0C02:01 > Suspending device device:49 > Suspending device device:48 > Suspending device device:47 > Suspending device device:46 > Suspending device device:45 > Suspending device device:44 > Suspending device device:43 > Suspending device device:42 > Suspending device device:41 > Suspending device device:40 > Suspending device device:3f > Suspending device device:3e > Suspending device device:3d > Suspending device device:3c > Suspending device device:3b > Suspending device device:3a > Suspending device device:39 > Suspending device device:38 > Suspending device device:37 > Suspending device device:36 > Suspending device device:35 > Suspending device device:34 > Suspending device device:33 > Suspending device PNP0C0F:07 > Suspending device PNP0C0F:06 > Suspending device PNP0C0F:05 > Suspending device PNP0C0F:04 > Suspending device PNP0C0F:03 > Suspending device PNP0C0F:02 > Suspending device PNP0C0F:01 > Suspending device PNP0C0F:00 > Suspending device device:32 > Suspending device device:31 > Suspending device device:30 > Suspending device device:2f > Suspending device device:2e > Suspending device device:2d > Suspending device device:2c > Suspending device device:2b > Suspending device device:2a > Suspending device device:29 > Suspending device device:28 > Suspending device device:27 > Suspending device device:26 > Suspending device device:25 > Suspending device device:24 > Suspending device device:23 > Suspending device device:22 > Suspending device device:21 > Suspending device device:20 > Suspending device device:1f > Suspending device device:1e > Suspending device device:1d > Suspending device device:1c > Suspending device device:1b > Suspending device device:1a > Suspending device device:19 > Suspending device device:18 > Suspending device device:17 > Suspending device device:16 > Suspending device device:15 > Suspending device device:14 > Suspending device device:13 > Suspending device device:12 > Suspending device device:11 > Suspending device device:10 > Suspending device PNP0C02:00 > Suspending device PNP0000:00 > Suspending device LNXPOWER:02 > Suspending device SYN0118:00 > Suspending device PNP0303:00 > Suspending device PNP0B00:00 > Suspending device PNP0800:00 > Suspending device PNP0200:00 > Suspending device PNP0100:00 > Suspending device PNP0C04:00 > Suspending device IFX0102:00 > Suspending device LNXPOWER:01 > Suspending device PNP0401:00 > Suspending device PNP0A06:00 > Suspending device PNP0C09:00 > Suspending device device:0f > Suspending device device:0e > Suspending device LNXPOWER:00 > Suspending device device:0d > Suspending device device:0c > Suspending device device:0b > Suspending device device:0a > Suspending device device:09 > Suspending device device:08 > Suspending device device:07 > Suspending device device:06 > Suspending device device:05 > Suspending device device:04 > Suspending device device:03 > Suspending device device:02 > Suspending device LNXVIDEO:00 > Suspending device device:01 > Suspending device PNP0A03:00 > Suspending device PNP0C01:00 > Suspending device device:00 > Suspending device ACPI0007:01 > Suspending device ACPI0007:00 > Suspending device LNXPWRBN:00 > Suspending device LNXSYSTM:00 > Suspending device id > Suspending device vtcon0 > Suspending device platform > Disabling non-boot CPUs ... > CPU0 attaching NULL sched-domain. > CPU1 attaching NULL sched-domain. > Cannot set affinity for irq 0 > CPU 1 is now offline > SMP alternatives: switching to UP code > CPU0 attaching NULL sched-domain. > CPU1 is down > Extended CMOS year: 2000 > hwsleep-0317 [00] enter_sleep_state : Entering sleep state [S3] > Back to C! > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:427 smp_call_function_single() > > Call Trace: > [<ffffffff8022ecc6>] task_rq_lock+0x3d/0x6f > [<ffffffff8021b51b>] smp_call_function_single+0x52/0xa0 > [<ffffffff80232f59>] set_cpus_allowed+0xbf/0xcc > [<ffffffff80214c61>] sc_freq_event+0x71/0x75 > [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 > [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 > [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 > [<ffffffff803c1b1d>] cpufreq_resume+0x131/0x157 > [<ffffffff80383128>] __sysdev_resume+0x34/0x4a > [<ffffffff8038366e>] sysdev_resume+0x1f/0x61 > [<ffffffff80388050>] device_power_up+0x9/0x10 > [<ffffffff8025bba4>] suspend_devices_and_enter+0xbf/0xf7 > [<ffffffff8025bd3f>] enter_state+0x163/0x1e5 > [<ffffffff8025be65>] state_store+0xa4/0xc2 > [<ffffffff802d98a1>] subsys_attr_store+0x31/0x33 > [<ffffffff802d9ccd>] sysfs_write_file+0xe0/0x11c > [<ffffffff80294d07>] vfs_write+0xc7/0x150 > [<ffffffff80295288>] sys_write+0x47/0x70 > [<ffffffff8020bfde>] system_call+0x7e/0x83 > > Extended CMOS year: 2000 > Enabling non-boot CPUs ... > CPU0 attaching NULL sched-domain. > SMP alternatives: switching to SMP code > Booting processor 1/2 APIC 0x1 > Initializing CPU#1 > Calibrating delay using timer specific routine.. 3990.28 BogoMIPS (lpj=7980574) > CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) > CPU: L2 Cache: 512K (64 bytes/line) > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 1 > AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping 02 > Machine check events logged > CPU0 attaching sched-domain: > domain 0: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000001 00000000,00000000,00000000,00000002 > CPU1 attaching sched-domain: > domain 0: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000002 00000000,00000000,00000000,00000001 > CPU1 is up > Clockevents: could not switch to one-shot mode: lapic is not functional. > Could not switch to high resolution mode on CPU 1 > ACPI: Transitioning device [C34F] to D3 > ACPI: Transitioning device [C34F] to D3 > ACPI: Transitioning device [C350] to D3 > ACPI: Transitioning device [C350] to D3 > ACPI: Transitioning device [C351] to D3 > ACPI: Transitioning device [C351] to D3 > PM: Writing back config space on device 0000:00:01.0 at offset 7 (was 22206161, writing 2206161) > PM: Writing back config space on device 0000:00:04.0 at offset 9 (was 10001, writing 1fff1) > PM: Writing back config space on device 0000:00:04.0 at offset 8 (was 0, writing d3f0d000) > PM: Writing back config space on device 0000:00:04.0 at offset 7 (was 101, writing 5141) > PM: Writing back config space on device 0000:00:04.0 at offset 3 (was 10000, writing 10010) > PM: Writing back config space on device 0000:00:04.0 at offset 1 (was 100000, writing 100007) > PCI: Setting latency timer of device 0000:00:04.0 to 64 > PM: Writing back config space on device 0000:00:05.0 at offset 9 (was 10001, writing 1fff1) > PM: Writing back config space on device 0000:00:05.0 at offset 8 (was 0, writing cff0cc00) > PM: Writing back config space on device 0000:00:05.0 at offset 7 (was 101, writing 3121) > PM: Writing back config space on device 0000:00:05.0 at offset 3 (was 10000, writing 10010) > PM: Writing back config space on device 0000:00:05.0 at offset 1 (was 100000, writing 100007) > PCI: Setting latency timer of device 0000:00:05.0 to 64 > PM: Writing back config space on device 0000:00:06.0 at offset 9 (was 10001, writing 1fff1) > PM: Writing back config space on device 0000:00:06.0 at offset 8 (was 0, writing c800c800) > PM: Writing back config space on device 0000:00:06.0 at offset 7 (was 101, writing 1f1) > PM: Writing back config space on device 0000:00:06.0 at offset 3 (was 10000, writing 10010) > PM: Writing back config space on device 0000:00:06.0 at offset 1 (was 100000, writing 100007) > PCI: Setting latency timer of device 0000:00:06.0 to 64 > PM: Writing back config space on device 0000:00:12.0 at offset f (was 100, writing 10a) > PM: Writing back config space on device 0000:00:12.0 at offset 3 (was 0, writing 4010) > ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 16 (level, low) -> IRQ 16 > ohci_hcd 0000:00:13.0: PCI legacy resume > PCI: Enabling device 0000:00:13.0 (0000 -> 0002) > ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 19 > PCI: Setting latency timer of device 0000:00:13.0 to 64 > PM: Writing back config space on device 0000:00:13.0 at offset f (was 100, writing 10b) > PM: Writing back config space on device 0000:00:13.0 at offset 4 (was 0, writing d4401000) > PM: Writing back config space on device 0000:00:13.0 at offset 3 (was 804000, writing 804010) > PM: Writing back config space on device 0000:00:13.0 at offset 1 (was 2b00006, writing 2b00007) > ohci_hcd 0000:00:13.1: PCI legacy resume > PCI: Enabling device 0000:00:13.1 (0000 -> 0002) > ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 19 > PCI: Setting latency timer of device 0000:00:13.1 to 64 > PM: Writing back config space on device 0000:00:13.1 at offset f (was 100, writing 10b) > PM: Writing back config space on device 0000:00:13.1 at offset 4 (was 0, writing d4402000) > PM: Writing back config space on device 0000:00:13.1 at offset 1 (was 2b00006, writing 2b00007) > ehci_hcd 0000:00:13.2: PCI D0, from previous PCI D3 > ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 19 > PCI: Setting latency timer of device 0000:00:13.2 to 64 > PM: Writing back config space on device 0000:00:13.2 at offset f (was 100, writing 10b) > ehci_hcd 0000:00:13.2: lost power, restarting > usb usb1: root hub lost power or was reset > ehci_hcd 0000:00:13.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT > ehci_hcd 0000:00:13.2: MWI active > PM: Writing back config space on device 0000:00:14.1 at offset f (was 100, writing 10a) > PM: Writing back config space on device 0000:00:14.1 at offset 8 (was 1, writing 7041) > PM: Writing back config space on device 0000:00:14.1 at offset 3 (was 0, writing 4010) > PM: Writing back config space on device 0000:00:14.1 at offset 1 (was 2300000, writing 2300005) > ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16 > PM: Writing back config space on device 0000:00:14.2 at offset f (was 10a, writing a) > PM: Writing back config space on device 0000:00:14.2 at offset 1 (was 4100000, writing 4100002) > ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16 > PM: Writing back config space on device 0000:00:14.4 at offset 3 (was 816000, writing 814000) > PM: Writing back config space on device 0000:30:00.0 at offset f (was 100, writing 10a) > PM: Writing back config space on device 0000:30:00.0 at offset 4 (was 0, writing c8000000) > PM: Writing back config space on device 0000:30:00.0 at offset 3 (was 0, writing 10) > PM: Writing back config space on device 0000:30:00.0 at offset 1 (was 100000, writing 100003) > PM: Writing back config space on device 0000:02:01.0 at offset 3 (was 0, writing 4010) > PM: Writing back config space on device 0000:02:01.0 at offset 1 (was 2b00000, writing 2b00006) > PM: Writing back config space on device 0000:02:04.0 at offset f (was 34001ff, writing 5c0010a) > PM: Writing back config space on device 0000:02:04.0 at offset e (was 0, writing 14fc) > PM: Writing back config space on device 0000:02:04.0 at offset d (was 0, writing 1400) > PM: Writing back config space on device 0000:02:04.0 at offset c (was 0, writing 10fc) > PM: Writing back config space on device 0000:02:04.0 at offset b (was 0, writing 1000) > PM: Writing back config space on device 0000:02:04.0 at offset a (was 0, writing 93fff000) > PM: Writing back config space on device 0000:02:04.0 at offset 9 (was 0, writing 90000000) > PM: Writing back config space on device 0000:02:04.0 at offset 8 (was 0, writing 8ffff000) > PM: Writing back config space on device 0000:02:04.0 at offset 7 (was 0, writing 8c000000) > PM: Writing back config space on device 0000:02:04.0 at offset 6 (was 0, writing b0060302) > PM: Writing back config space on device 0000:02:04.0 at offset 4 (was 0, writing d4010000) > PM: Writing back config space on device 0000:02:04.0 at offset 3 (was 820000, writing 82a810) > PM: Writing back config space on device 0000:02:04.0 at offset 1 (was 2100000, writing 2100007) > PM: Writing back config space on device 0000:02:04.1 at offset f (was 4020100, writing 402010a) > PM: Writing back config space on device 0000:02:04.1 at offset 5 (was 0, writing d4014000) > PM: Writing back config space on device 0000:02:04.1 at offset 4 (was 0, writing d4011000) > PM: Writing back config space on device 0000:02:04.1 at offset 3 (was 800000, writing 804010) > PM: Writing back config space on device 0000:02:04.1 at offset 1 (was 2100000, writing 2100006) > ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[d4011000-d40117ff] Max Packet=[2048] IR/IT contexts=[4/8] > PM: Writing back config space on device 0000:02:04.2 at offset f (was 40701ff, writing 407010a) > PM: Writing back config space on device 0000:02:04.2 at offset 4 (was 0, writing d4018000) > PM: Writing back config space on device 0000:02:04.2 at offset 3 (was 800000, writing 804010) > PM: Writing back config space on device 0000:02:04.2 at offset 1 (was 2100000, writing 2100006) > ACPI: PCI Interrupt 0000:02:04.2[A] -> GSI 20 (level, low) -> IRQ 20 > PM: Writing back config space on device 0000:02:04.3 at offset f (was 40701ff, writing 407010a) > PM: Writing back config space on device 0000:02:04.3 at offset 4 (was 0, writing d4019000) > PM: Writing back config space on device 0000:02:04.3 at offset 3 (was 800000, writing 804010) > PM: Writing back config space on device 0000:02:04.3 at offset 1 (was 2100000, writing 2100006) > ACPI: PCI Interrupt 0000:02:04.3[A] -> GSI 20 (level, low) -> IRQ 20 > sd 0:0:0:0: [sda] Starting disk > ata2: SATA link down (SStatus 0 SControl 300) > ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) > ata1.00: configured for UDMA/100 > sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) > sd 0:0:0:0: [sda] Write Protect is off > sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 > hda: selected mode 0x22 > usb usb1: usb resume > ehci_hcd 0000:00:13.2: resume root hub after power loss > hub 1-0:1.0: trying to enable port power on non-switchable hub > usb usb2: usb resume > ohci_hcd 0000:00:13.0: lost power > ohci_hcd 0000:00:13.0: OHCI controller state > ohci_hcd 0000:00:13.0: OHCI 1.0, NO legacy support registers > ohci_hcd 0000:00:13.0: control 0x083 HCFS=operational CBSR=3 > ohci_hcd 0000:00:13.0: cmdstatus 0x00000 SOC=0 > ohci_hcd 0000:00:13.0: intrstatus 0x00000004 SF > ohci_hcd 0000:00:13.0: intrenable 0x8000005a MIE RHSC UE RD WDH > ohci_hcd 0000:00:13.0: hcca frame #0005 > ohci_hcd 0000:00:13.0: roothub.a 02000204 POTPGT=2 NPS NDP=4(4) > ohci_hcd 0000:00:13.0: roothub.b 00000000 PPCM=0000 DR=0000 > ohci_hcd 0000:00:13.0: roothub.status 00008000 DRWE > ohci_hcd 0000:00:13.0: roothub.portstatus [0] 0x00000100 PPS > ohci_hcd 0000:00:13.0: roothub.portstatus [1] 0x00000100 PPS > ohci_hcd 0000:00:13.0: roothub.portstatus [2] 0x00000100 PPS > ohci_hcd 0000:00:13.0: roothub.portstatus [3] 0x00000100 PPS > ohci_hcd 0000:00:13.0: restart complete > usb usb2: root hub lost power or was reset > hub 2-0:1.0: trying to enable port power on non-switchable hub > hub 2-0:1.0: logical disconnect on port 2 > usb usb3: usb resume > ohci_hcd 0000:00:13.1: lost power > ohci_hcd 0000:00:13.1: OHCI controller state > ohci_hcd 0000:00:13.1: OHCI 1.0, NO legacy support registers > ohci_hcd 0000:00:13.1: control 0x083 HCFS=operational CBSR=3 > ohci_hcd 0000:00:13.1: cmdstatus 0x00000 SOC=0 > ohci_hcd 0000:00:13.1: intrstatus 0x00000004 SF > ohci_hcd 0000:00:13.1: intrenable 0x8000005a MIE RHSC UE RD WDH > ohci_hcd 0000:00:13.1: hcca frame #000b > ohci_hcd 0000:00:13.1: roothub.a 02000204 POTPGT=2 NPS NDP=4(4) > ohci_hcd 0000:00:13.1: roothub.b 00000000 PPCM=0000 DR=0000 > ohci_hcd 0000:00:13.1: roothub.status 00008000 DRWE > ohci_hcd 0000:00:13.1: roothub.portstatus [0] 0x00000100 PPS > ohci_hcd 0000:00:13.1: roothub.portstatus [1] 0x00000100 PPS > ohci_hcd 0000:00:13.1: roothub.portstatus [2] 0x00000100 PPS > ohci_hcd 0000:00:13.1: roothub.portstatus [3] 0x00000100 PPS > ohci_hcd 0000:00:13.1: restart complete > usb usb3: root hub lost power or was reset > hub 3-0:1.0: trying to enable port power on non-switchable hub > hub 3-0:1.0: logical disconnect on port 1 > hub 3-0:1.0: logical disconnect on port 3 > PM: Finishing wakeup. > Restarting tasks ... done. > hub 1-0:1.0: state 7 ports 8 chg 0000 evt 004c > ehci_hcd 0000:00:13.2: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT > hub 1-0:1.0: port 2, status 0501, change 0001, 480 Mb/s > hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x501 > ehci_hcd 0000:00:13.2: port 2 full speed --> companion > ehci_hcd 0000:00:13.2: GetStatus port 2 status 003801 POWER OWNER sig=j CONNECT > hub 1-0:1.0: port 2 not reset yet, waiting 50ms > ehci_hcd 0000:00:13.2: GetStatus port 2 status 003002 POWER OWNER sig=se0 CSC > ehci_hcd 0000:00:13.2: GetStatus port 3 status 001803 POWER sig=j CSC CONNECT > hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s > hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x501 > ehci_hcd 0000:00:13.2: port 3 full speed --> companion > ehci_hcd 0000:00:13.2: GetStatus port 3 status 003801 POWER OWNER sig=j CONNECT > hub 1-0:1.0: port 3 not reset yet, waiting 50ms > ehci_hcd 0000:00:13.2: GetStatus port 3 status 003002 POWER OWNER sig=se0 CSC > ehci_hcd 0000:00:13.2: GetStatus port 6 status 001403 POWER sig=k CSC CONNECT > hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s > hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501 > ehci_hcd 0000:00:13.2: port 6 low speed --> companion > ehci_hcd 0000:00:13.2: GetStatus port 6 status 003002 POWER OWNER sig=se0 CSC > hub 2-0:1.0: state 7 ports 4 chg 0004 evt 0004 > ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [1] = 0x00010101 CSC PPS CCS > hub 2-0:1.0: port 2, status 0101, change 0001, 12 Mb/s > usb 2-2: USB disconnect, address 2 > usb 2-2: unregistering device > usb 2-2: usb_disable_device nuking all URBs > usb 2-2: unregistering interface 2-2:1.0 > usb 2-2:1.0: uevent > usb 2-2:1.0: uevent > usb 2-2: unregistering interface 2-2:1.1 > usb 2-2:1.1: uevent > usb 2-2:1.1: uevent > usb 2-2: unregistering interface 2-2:1.2 > usb 2-2:1.2: uevent > usb 2-2:1.2: uevent > usb 2-2: unregistering interface 2-2:1.3 > usb 2-2:1.3: uevent > usb 2-2:1.3: uevent > usb 2-2: uevent > hub 2-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101 > ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS > usb 2-2: new full speed USB device using ohci_hcd and address 3 > ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS > usb 2-2: skipped 1 descriptor after interface > usb 2-2: default language 0x0409 > usb 2-2: uevent > usb 2-2: usb_probe_device > usb 2-2: configuration #1 chosen from 1 choice > usb 2-2: adding 2-2:1.0 (config #1, interface 0) > usb 2-2:1.0: uevent > usb 2-2:1.0: uevent > hci_usb 2-2:1.0: usb_probe_interface > hci_usb 2-2:1.0: usb_probe_interface - got id > usb 2-2: adding 2-2:1.1 (config #1, interface 1) > usb 2-2:1.1: uevent > usb 2-2:1.1: uevent > usb 2-2: adding 2-2:1.2 (config #1, interface 2) > usb 2-2:1.2: uevent > usb 2-2:1.2: uevent > hci_usb 2-2:1.2: usb_probe_interface > hci_usb 2-2:1.2: usb_probe_interface - got id > usb 2-2: adding 2-2:1.3 (config #1, interface 3) > usb 2-2:1.3: uevent > usb 2-2:1.3: uevent > hci_usb 2-2:1.3: usb_probe_interface > hci_usb 2-2:1.3: usb_probe_interface - got id > /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '003' > usb 2-2: new device found, idVendor=03f0, idProduct=171d > usb 2-2: new device strings: Mfr=1, Product=2, SerialNumber=0 > usb 2-2: Product: HP Integrated Module > usb 2-2: Manufacturer: Broadcom Corp > hub 3-0:1.0: state 7 ports 4 chg 000a evt 000a > ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [0] = 0x00010101 CSC PPS CCS > hub 3-0:1.0: port 1, status 0101, change 0001, 12 Mb/s > usb 3-1: USB disconnect, address 2 > usb 3-1: unregistering device > usb 3-1: usb_disable_device nuking all URBs > usb 3-1: unregistering interface 3-1:1.0 > usb 3-1:1.0: uevent > usb 3-1:1.0: uevent > usb 3-1: uevent > hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 > ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS > usb 3-1: new full speed USB device using ohci_hcd and address 4 > ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS > usb 3-1: ep0 maxpacket = 8 > usb 3-1: default language 0x0409 > usb 3-1: uevent > usb 3-1: usb_probe_device > usb 3-1: configuration #1 chosen from 1 choice > usb 3-1: adding 3-1:1.0 (config #1, interface 0) > usb 3-1:1.0: uevent > usb 3-1:1.0: uevent > /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '004' > usb 3-1: new device found, idVendor=08ff, idProduct=2580 > usb 3-1: new device strings: Mfr=0, Product=1, SerialNumber=0 > usb 3-1: Product: Fingerprint Sensor > ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [2] = 0x00010301 CSC LSDA PPS CCS > hub 3-0:1.0: port 3, status 0301, change 0001, 1.5 Mb/s > usb 3-3: USB disconnect, address 3 > usb 3-3: unregistering device > usb 3-3: usb_disable_device nuking all URBs > usb 3-3: unregistering interface 3-3:1.0 > usb 3-3:1.0: uevent > usb 3-3:1.0: uevent > usb 3-3: unregistering interface 3-3:1.1 > /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/file.c: removing 96 minor > usb 3-3:1.1: uevent > usb 3-3:1.1: uevent > usb 3-3: uevent > hub 3-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x301 > ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [2] = 0x00100303 PRSC LSDA PPS PES CCS > usb 3-3: new low speed USB device using ohci_hcd and address 5 > ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [2] = 0x00100303 PRSC LSDA PPS PES CCS > usb 3-3: skipped 1 descriptor after interface > usb 3-3: skipped 1 descriptor after interface > usb 3-3: default language 0x0409 > usb 3-3: uevent > usb 3-3: usb_probe_device > usb 3-3: configuration #1 chosen from 1 choice > usb 3-3: adding 3-3:1.0 (config #1, interface 0) > usb 3-3:1.0: uevent > usb 3-3:1.0: uevent > usbhid 3-3:1.0: usb_probe_interface > usbhid 3-3:1.0: usb_probe_interface - got id > input: Logitech USB Receiver as /class/input/input8 > input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:13.1-3 > usb 3-3: adding 3-3:1.1 (config #1, interface 1) > usb 3-3:1.1: uevent > usb 3-3:1.1: uevent > usbhid 3-3:1.1: usb_probe_interface > usbhid 3-3:1.1: usb_probe_interface - got id > input: Logitech USB Receiver as /class/input/input9 > /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/file.c: looking for a minor, starting at 96 > input,hiddev96: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:13.1-3 > /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '005' > usb 3-3: new device found, idVendor=046d, idProduct=c521 > usb 3-3: new device strings: Mfr=1, Product=2, SerialNumber=0 > usb 3-3: Product: USB Receiver > usb 3-3: Manufacturer: Logitech > hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0040 > hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0004 > hub 3-0:1.0: state 7 ports 4 chg 0000 evt 0008 > hub 1-0:1.0: hub_suspend > usb usb1: bus auto-suspend > ehci_hcd 0000:00:13.2: suspend root hub > bcm43xx driver > ACPI: PCI Interrupt 0000:30:00.0[A] -> GSI 18 (level, low) -> IRQ 18 > PCI: Setting latency timer of device 0000:30:00.0 to 64 > bcm43xx: Chip ID 0x4311, rev 0x1 > bcm43xx: Number of cores: 4 > bcm43xx: Core 0: ID 0x800, rev 0x11, vendor 0x4243 > bcm43xx: Core 1: ID 0x812, rev 0xa, vendor 0x4243 > bcm43xx: Core 2: ID 0x817, rev 0x3, vendor 0x4243 > bcm43xx: Core 3: ID 0x820, rev 0x1, vendor 0x4243 > bcm43xx: PHY connected > bcm43xx: Detected PHY: Analog: 4, Type 2, Revision 8 > bcm43xx: Detected Radio: ID: 2205017f (Manuf: 17f Ver: 2050 Rev: 2) > bcm43xx: Radio initialized > bcm43xx: Radio initialized > bcm43xx: PHY connected > bcm43xx: Microcode rev 0x127, pl 0xe (2005-04-18 02:36:27) > bcm43xx: Radio turned on > bcm43xx: Radio enabled by hardware > bcm43xx: Chip initialized > bcm43xx: 32-bit DMA initialized > bcm43xx: Keys cleared > bcm43xx: Selected 802.11 core (phytype 2) > ADDRCONF(NETDEV_UP): eth1: link is not ready > SoftMAC: Scanning finished: scanned 13 channels starting with channel 1 > SoftMAC: Associate: Scanning for networks first. > SoftMAC: Scanning finished: scanned 13 channels starting with channel 1 > SoftMAC: Queueing Authentication Request to 00:17:9a:f3:b5:75 > SoftMAC: Cannot associate without being authenticated, requested authentication > SoftMAC: Sent Authentication Request to 00:17:9a:f3:b5:75. > SoftMAC: Open Authentication completed with 00:17:9a:f3:b5:75 > SoftMAC: sent association request! > SoftMAC: associated! > ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready > SFW2-OUT-ERROR IN= OUT=eth1 SRC=0000:0000:0000:0000:0000:0000:0000:0000 DST=ff02:0000:0000:0000:0000:0000:0000:0016 LEN=76 TC=0 HOPLIMIT=1 FLOWLBL=0 OPT ( ) PROTO=ICMPv6 TYPE=143 CODE=0 > SoftMAC: Getting essid from req_essid > SFW2-OUT-ERROR IN= OUT=eth1 SRC=0000:0000:0000:0000:0000:0000:0000:0000 DST=ff02:0000:0000:0000:0000:0001:ffbe:9531 LEN=64 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=ICMPv6 TYPE=135 CODE=0 > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SFW2-OUT-ERROR IN= OUT=eth1 SRC=fe80:0000:0000:0000:0214:a5ff:febe:9531 DST=ff02:0000:0000:0000:0000:0000:0000:0002 LEN=56 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=ICMPv6 TYPE=133 CODE=0 > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SFW2-OUT-ERROR IN= OUT=eth1 SRC=fe80:0000:0000:0000:0214:a5ff:febe:9531 DST=ff02:0000:0000:0000:0000:0000:0000:0002 LEN=56 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=ICMPv6 TYPE=133 CODE=0 > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SFW2-OUT-ERROR IN= OUT=eth1 SRC=fe80:0000:0000:0000:0214:a5ff:febe:9531 DST=ff02:0000:0000:0000:0000:0000:0000:0016 LEN=76 TC=0 HOPLIMIT=1 FLOWLBL=0 OPT ( ) PROTO=ICMPv6 TYPE=143 CODE=0 > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SFW2-OUT-ERROR IN= OUT=eth1 SRC=fe80:0000:0000:0000:0214:a5ff:febe:9531 DST=ff02:0000:0000:0000:0000:0000:0000:0002 LEN=56 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=ICMPv6 TYPE=133 CODE=0 > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > eth1: no IPv6 routers present > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() > > Call Trace: > [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9 > [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 > [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 > [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 > [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 > [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 > [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 > [<ffffffff8024ee6d>] update_target+0x71/0x76 > [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0 > [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382 > [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc > [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 > [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f > [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 > [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 > [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 > [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 > [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 > [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 > [<ffffffff80282e91>] vma_link+0xdd/0x10b > [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a > [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 > [<ffffffff802a0896>] do_ioctl+0x2a/0x77 > [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e > [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b > [<ffffffff8020bfde>] system_call+0x7e/0x83 > > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() > > Call Trace: > [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82 > [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 > [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 > [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 > [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 > [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 > [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2 > [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 > [<ffffffff8024ee6d>] update_target+0x71/0x76 > [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2 > [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382 > [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc > [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 > [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f > [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 > [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 > [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 > [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 > [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 > [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 > [<ffffffff80282e91>] vma_link+0xdd/0x10b > [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a > [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 > [<ffffffff802a0896>] do_ioctl+0x2a/0x77 > [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e > [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b > [<ffffffff8020bfde>] system_call+0x7e/0x83 > > SoftMAC: Getting essid from req_essid > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() > > Call Trace: > [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9 > [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 > [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 > [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 > [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 > [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 > [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 > [<ffffffff8024ee6d>] update_target+0x71/0x76 > [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0 > [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382 > [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc > [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 > [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f > [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 > [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 > [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 > [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 > [<ffffffff8022f18e>] default_wake_function+0x0/0xf > [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 > [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 > [<ffffffff80282e91>] vma_link+0xdd/0x10b > [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a > [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 > [<ffffffff802a0896>] do_ioctl+0x2a/0x77 > [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e > [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b > [<ffffffff8020bfde>] system_call+0x7e/0x83 > > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() > > Call Trace: > [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82 > [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 > [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 > [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 > [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 > [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 > [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2 > [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 > [<ffffffff8024ee6d>] update_target+0x71/0x76 > [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2 > [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382 > [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc > [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 > [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f > [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 > [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 > [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 > [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 > [<ffffffff8022f18e>] default_wake_function+0x0/0xf > [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 > [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 > [<ffffffff80282e91>] vma_link+0xdd/0x10b > [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a > [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 > [<ffffffff802a0896>] do_ioctl+0x2a/0x77 > [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e > [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b > [<ffffffff8020bfde>] system_call+0x7e/0x83 > > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() > > Call Trace: > [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9 > [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 > [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 > [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 > [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 > [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 > [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 > [<ffffffff8024ee6d>] update_target+0x71/0x76 > [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0 > [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382 > [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc > [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 > [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f > [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 > [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 > [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 > [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 > [<ffffffff8022f18e>] default_wake_function+0x0/0xf > [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 > [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 > [<ffffffff80282e91>] vma_link+0xdd/0x10b > [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a > [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 > [<ffffffff802a0896>] do_ioctl+0x2a/0x77 > [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e > [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b > [<ffffffff8020bfde>] system_call+0x7e/0x83 > > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() > > Call Trace: > [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82 > [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 > [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 > [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 > [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 > [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 > [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2 > [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 > [<ffffffff8024ee6d>] update_target+0x71/0x76 > [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2 > [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382 > [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc > [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 > [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f > [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 > [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 > [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 > [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 > [<ffffffff8022f18e>] default_wake_function+0x0/0xf > [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 > [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 > [<ffffffff80282e91>] vma_link+0xdd/0x10b > [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a > [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 > [<ffffffff802a0896>] do_ioctl+0x2a/0x77 > [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e > [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b > [<ffffffff8020bfde>] system_call+0x7e/0x83 > > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() > > Call Trace: > [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9 > [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 > [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 > [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 > [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 > [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 > [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 > [<ffffffff8024ee6d>] update_target+0x71/0x76 > [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0 > [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382 > [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc > [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 > [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f > [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 > [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 > [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 > [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 > [<ffffffff8022f18e>] default_wake_function+0x0/0xf > [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 > [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 > [<ffffffff80282e91>] vma_link+0xdd/0x10b > [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a > [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 > [<ffffffff802a0896>] do_ioctl+0x2a/0x77 > [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e > [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b > [<ffffffff8020bfde>] system_call+0x7e/0x83 > > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() > > Call Trace: > [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82 > [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 > [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 > [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 > [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 > [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 > [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2 > [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 > [<ffffffff8024ee6d>] update_target+0x71/0x76 > [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2 > [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382 > [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc > [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 > [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f > [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 > [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 > [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 > [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 > [<ffffffff8022f18e>] default_wake_function+0x0/0xf > [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 > [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 > [<ffffffff80282e91>] vma_link+0xdd/0x10b > [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a > [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 > [<ffffffff802a0896>] do_ioctl+0x2a/0x77 > [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e > [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b > [<ffffffff8020bfde>] system_call+0x7e/0x83 > > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > bcm43xx: Radio initialized > bcm43xx: DMA-32 0x0200 (RX) max used slots: 1/64 > bcm43xx: DMA-32 0x02A0 (TX) max used slots: 0/512 > bcm43xx: DMA-32 0x0280 (TX) max used slots: 0/512 > bcm43xx: DMA-32 0x0260 (TX) max used slots: 0/512 > bcm43xx: DMA-32 0x0240 (TX) max used slots: 0/512 > bcm43xx: DMA-32 0x0220 (TX) max used slots: 2/512 > bcm43xx: DMA-32 0x0200 (TX) max used slots: 0/512 > ACPI: PCI interrupt for device 0000:30:00.0 disabled > swsusp: Marking nosave pages: 000000000009f000 - 0000000000100000 > swsusp: Basic memory bitmaps created > Syncing filesystems ... done. > Freezing user space processes ... (elapsed 0.00 seconds) done. > Freezing remaining freezable tasks ... (elapsed 0.19 seconds) done. > Shrinking memory... \b-\b\\bdone (15072 pages freed) > Freed 60288 kbytes in 0.22 seconds (274.03 MB/s) > Suspending device vcsa8 > Suspending device vcs8 > Suspending device vcsa10 > Suspending device vcs10 > Suspending device usbdev3.5 > Suspending device usbdev3.5_ep82 > Suspending device hiddev0 > Suspending device event3 > Suspending device input9 > Suspending device 3-3:1.1 > Suspending device usbdev3.5_ep81 > Suspending device event2 > Suspending device mouse0 > Suspending device input8 > Suspending device 3-3:1.0 > Suspending device usbdev3.5_ep00 > Suspending device 3-3 > Suspending device usbdev3.4 > Suspending device usbdev3.4_ep02 > Suspending device usbdev3.4_ep81 > Suspending device 3-1:1.0 > Suspending device usbdev3.4_ep00 > Suspending device 3-1 > Suspending device usbdev2.3 > Suspending device 2-2:1.3 > Suspending device usbdev2.3_ep04 > Suspending device usbdev2.3_ep84 > Suspending device 2-2:1.2 > Suspending device usbdev2.3_ep03 > Suspending device usbdev2.3_ep83 > Suspending device 2-2:1.1 > Suspending device usbdev2.3_ep02 > Suspending device usbdev2.3_ep82 > Suspending device usbdev2.3_ep81 > Suspending device hci0 > Suspending device 2-2:1.0 > Suspending device usbdev2.3_ep00 > Suspending device 2-2 > Suspending device vcsa4 > Suspending device vcs4 > Suspending device vcsa2 > Suspending device vcs2 > Suspending device vcsa6 > Suspending device vcs6 > Suspending device vcsa5 > Suspending device vcs5 > Suspending device vcsa3 > Suspending device vcs3 > Suspending device vcsa7 > Suspending device vcs7 > Suspending device audio > Suspending device dsp > Suspending device mixer > Suspending device event7 > Suspending device input7 > Suspending device event6 > Suspending device input6 > Suspending device event5 > Suspending device input5 > Suspending device seq > Suspending device C1BE > Suspending device C1BF > Suspending device C1BD > Suspending device device-mapper > Suspending device serio5 > Suspending device event4 > Suspending device mouse1 > Suspending device input4 > Suspending device bluetooth > Suspending device usbdev3.1 > Suspending device usbdev3.1_ep81 > Suspending device 00023f9929613f0c > Suspending device 00023f9929613f0c > Suspending device 3-0:1.0 > Suspending device usbdev3.1_ep00 > Suspending device usb3 > hub 3-0:1.0: hub_suspend > usb usb3: bus suspend > ohci_hcd 0000:00:13.1: suspend root hub > Suspending device pcmcia_socket0 > Suspending device usbdev2.1 > Suspending device usbdev2.1_ep81 > Suspending device 2-0:1.0 > Suspending device usbdev2.1_ep00 > Suspending device usb2 > hub 2-0:1.0: hub_suspend > usb usb2: bus suspend > ohci_hcd 0000:00:13.0: suspend root hub > Suspending device hwmon0 > Suspending device usbdev1.1 > Suspending device usbdev1.1_ep81 > Suspending device 1-0:1.0 > Suspending device usbdev1.1_ep00 > Suspending device usb1 > Suspending device fw-host0 > Suspending device fw-host0 > Suspending device mmc0 > Suspending device i2c-0 > Suspending device eth0 > Suspending device controlC0 > Suspending device hwC0D0 > Suspending device hwC0D1 > Suspending device pcmC0D0c > Suspending device pcmC0D0p > Suspending device timer > Suspending device vcsa1 > Suspending device vcs1 > Suspending device 0.0 > Suspending device ide0 > Suspending device network_throughput > Suspending device network_latency > Suspending device cpu_dma_latency > Suspending device event1 > Suspending device event0 > Suspending device input1 > Suspending device input0 > Suspending device psaux > Suspending device mice > Suspending device serio4 > Suspending device serio3 > Suspending device serio2 > Suspending device serio1 > Suspending device serio0 > Suspending device i8042 > Suspending device 0:0:0:0 > sd 0:0:0:0: [sda] Synchronizing SCSI cache > Suspending device target0:0:0 > Suspending device host1 > Suspending device host0 > Suspending device ttyS3 > Suspending device ttyS2 > Suspending device ttyS1 > Suspending device ttyS0 > Suspending device serial8250 > Suspending device nvram > Suspending device hpet > Suspending device rtc > Suspending device ttysf > Suspending device ttyse > Suspending device ttysd > Suspending device ttysc > Suspending device ttysb > Suspending device ttysa > Suspending device ttys9 > Suspending device ttys8 > Suspending device ttys7 > Suspending device ttys6 > Suspending device ttys5 > Suspending device ttys4 > Suspending device ttys3 > Suspending device ttys2 > Suspending device ttys1 > Suspending device ttys0 > Suspending device ttyrf > Suspending device ttyre > Suspending device ttyrd > Suspending device ttyrc > Suspending device ttyrb > Suspending device ttyra > Suspending device ttyr9 > Suspending device ttyr8 > Suspending device ttyr7 > Suspending device ttyr6 > Suspending device ttyr5 > Suspending device ttyr4 > Suspending device ttyr3 > Suspending device ttyr2 > Suspending device ttyr1 > Suspending device ttyr0 > Suspending device ttyqf > Suspending device ttyqe > Suspending device ttyqd > Suspending device ttyqc > Suspending device ttyqb > Suspending device ttyqa > Suspending device ttyq9 > Suspending device ttyq8 > Suspending device ttyq7 > Suspending device ttyq6 > Suspending device ttyq5 > Suspending device ttyq4 > Suspending device ttyq3 > Suspending device ttyq2 > Suspending device ttyq1 > Suspending device ttyq0 > Suspending device ttypf > Suspending device ttype > Suspending device ttypd > Suspending device ttypc > Suspending device ttypb > Suspending device ttypa > Suspending device ttyp9 > Suspending device ttyp8 > Suspending device ttyp7 > Suspending device ttyp6 > Suspending device ttyp5 > Suspending device ttyp4 > Suspending device ttyp3 > Suspending device ttyp2 > Suspending device ttyp1 > Suspending device ttyp0 > Suspending device ptysf > Suspending device ptyse > Suspending device ptysd > Suspending device ptysc > Suspending device ptysb > Suspending device ptysa > Suspending device ptys9 > Suspending device ptys8 > Suspending device ptys7 > Suspending device ptys6 > Suspending device ptys5 > Suspending device ptys4 > Suspending device ptys3 > Suspending device ptys2 > Suspending device ptys1 > Suspending device ptys0 > Suspending device ptyrf > Suspending device ptyre > Suspending device ptyrd > Suspending device ptyrc > Suspending device ptyrb > Suspending device ptyra > Suspending device ptyr9 > Suspending device ptyr8 > Suspending device ptyr7 > Suspending device ptyr6 > Suspending device ptyr5 > Suspending device ptyr4 > Suspending device ptyr3 > Suspending device ptyr2 > Suspending device ptyr1 > Suspending device ptyr0 > Suspending device ptyqf > Suspending device ptyqe > Suspending device ptyqd > Suspending device ptyqc > Suspending device ptyqb > Suspending device ptyqa > Suspending device ptyq9 > Suspending device ptyq8 > Suspending device ptyq7 > Suspending device ptyq6 > Suspending device ptyq5 > Suspending device ptyq4 > Suspending device ptyq3 > Suspending device ptyq2 > Suspending device ptyq1 > Suspending device ptyq0 > Suspending device ptypf > Suspending device ptype > Suspending device ptypd > Suspending device ptypc > Suspending device ptypb > Suspending device ptypa > Suspending device ptyp9 > Suspending device ptyp8 > Suspending device ptyp7 > Suspending device ptyp6 > Suspending device ptyp5 > Suspending device ptyp4 > Suspending device ptyp3 > Suspending device ptyp2 > Suspending device ptyp1 > Suspending device ptyp0 > Suspending device tty63 > Suspending device tty62 > Suspending device tty61 > Suspending device tty60 > Suspending device tty59 > Suspending device tty58 > Suspending device tty57 > Suspending device tty56 > Suspending device tty55 > Suspending device tty54 > Suspending device tty53 > Suspending device tty52 > Suspending device tty51 > Suspending device tty50 > Suspending device tty49 > Suspending device tty48 > Suspending device tty47 > Suspending device tty46 > Suspending device tty45 > Suspending device tty44 > Suspending device tty43 > Suspending device tty42 > Suspending device tty41 > Suspending device tty40 > Suspending device tty39 > Suspending device tty38 > Suspending device tty37 > Suspending device tty36 > Suspending device tty35 > Suspending device tty34 > Suspending device tty33 > Suspending device tty32 > Suspending device tty31 > Suspending device tty30 > Suspending device tty29 > Suspending device tty28 > Suspending device tty27 > Suspending device tty26 > Suspending device tty25 > Suspending device tty24 > Suspending device tty23 > Suspending device tty22 > Suspending device tty21 > Suspending device tty20 > Suspending device tty19 > Suspending device tty18 > Suspending device tty17 > Suspending device tty16 > Suspending device tty15 > Suspending device tty14 > Suspending device tty13 > Suspending device tty12 > Suspending device tty11 > Suspending device tty10 > Suspending device tty9 > Suspending device tty8 > Suspending device tty7 > Suspending device tty6 > Suspending device tty5 > Suspending device tty4 > Suspending device tty3 > Suspending device tty2 > Suspending device tty1 > Suspending device vcsa > Suspending device vcs > Suspending device tty0 > Suspending device ptmx > Suspending device console > Suspending device tty > Suspending device vtcon1 > Suspending device fb0 > Suspending device vesafb.0 > Suspending device fbcon > Suspending device 0000:00:06.0:pcie03 > Suspending device 0000:00:06.0:pcie01 > Suspending device 0000:00:06.0:pcie00 > Suspending device 0000:00:05.0:pcie03 > Suspending device 0000:00:05.0:pcie01 > Suspending device 0000:00:05.0:pcie00 > Suspending device 0000:00:04.0:pcie03 > Suspending device 0000:00:04.0:pcie01 > Suspending device 0000:00:04.0:pcie00 > Suspending device snapshot > Suspending device pcspkr > Suspending device mcelog > Suspending device lo > Suspending device kmsg > Suspending device urandom > Suspending device random > Suspending device full > Suspending device zero > Suspending device port > Suspending device null > Suspending device kmem > Suspending device mem > Suspending device 00:0c > ACPI handle has no context! > Suspending device 00:0b > Suspending device 00:0a > Suspending device 00:09 > Suspending device 00:08 > Suspending device 00:07 > Suspending device 00:06 > Suspending device 00:05 > Suspending device 00:04 > Suspending device 00:03 > Suspending device 00:02 > Suspending device 00:01 > Suspending device 00:00 > Suspending device pnp0 > Suspending device 0000:02 > Suspending device 0000:03 > Suspending device 0000:02:04.3 > ACPI handle has no context! > ACPI: PCI interrupt for device 0000:02:04.3 disabled > ACPI handle has no context! > Suspending device 0000:02:04.2 > ACPI handle has no context! > ACPI: PCI interrupt for device 0000:02:04.2 disabled > ACPI handle has no context! > Suspending device 0000:02:04.1 > ACPI handle has no context! > Suspending device 0000:02:04.0 > Suspending device 0000:02:01.0 > Suspending device 0000:30 > Suspending device 0000:30:00.0 > Suspending device 0000:20 > Suspending device 0000:10 > Suspending device 0000:01 > Suspending device 0000:01:05.0 > Suspending device 0000:00:18.3 > Suspending device 0000:00:18.2 > Suspending device 0000:00:18.1 > Suspending device 0000:00:18.0 > Suspending device 0000:00:14.4 > Suspending device 0000:00:14.3 > Suspending device 0000:00:14.2 > ACPI: PCI interrupt for device 0000:00:14.2 disabled > Suspending device 0000:00:14.1 > Suspending device 0000:00:14.0 > Suspending device 0000:00:13.2 > ACPI: PCI interrupt for device 0000:00:13.2 disabled > ehci_hcd 0000:00:13.2: --> PCI D3 > Suspending device 0000:00:13.1 > ACPI: PCI interrupt for device 0000:00:13.1 disabled > ohci_hcd 0000:00:13.1: --> PCI D0/legacy > Suspending device 0000:00:13.0 > ACPI: PCI interrupt for device 0000:00:13.0 disabled > ohci_hcd 0000:00:13.0: --> PCI D0/legacy > Suspending device 0000:00:12.0 > ACPI: PCI interrupt for device 0000:00:12.0 disabled > Suspending device 0000:00:06.0 > Suspending device 0000:00:05.0 > Suspending device 0000:00:04.0 > Suspending device 0000:00:01.0 > Suspending device 0000:00:00.0 > Suspending device 0000:00 > Suspending device pci0000:00 > Suspending device LNXTHERM:03 > Suspending device LNXTHERM:02 > Suspending device LNXTHERM:01 > Suspending device PNP0C0B:03 > Suspending device PNP0C0B:02 > ACPI: Transitioning device [C351] to D0 > ACPI: Transitioning device [C351] to D0 > Suspending device PNP0C0B:01 > ACPI: Transitioning device [C350] to D0 > ACPI: Transitioning device [C350] to D0 > Suspending device PNP0C0B:00 > ACPI: Transitioning device [C34F] to D0 > ACPI: Transitioning device [C34F] to D0 > Suspending device LNXPOWER:06 > Suspending device LNXPOWER:05 > Suspending device LNXPOWER:04 > Suspending device LNXPOWER:03 > Suspending device LNXTHERM:00 > Suspending device PNP0C02:02 > Suspending device PNP0C14:00 > Suspending device PNP0C0D:00 > Suspending device PNP0C0E:00 > Suspending device ACPI0003:00 > Suspending device PNP0C0A:01 > Suspending device PNP0C0A:00 > Suspending device HPQ0006:00 > Suspending device PNP0C02:01 > Suspending device device:49 > Suspending device device:48 > Suspending device device:47 > Suspending device device:46 > Suspending device device:45 > Suspending device device:44 > Suspending device device:43 > Suspending device device:42 > Suspending device device:41 > Suspending device device:40 > Suspending device device:3f > Suspending device device:3e > Suspending device device:3d > Suspending device device:3c > Suspending device device:3b > Suspending device device:3a > Suspending device device:39 > Suspending device device:38 > Suspending device device:37 > Suspending device device:36 > Suspending device device:35 > Suspending device device:34 > Suspending device device:33 > Suspending device PNP0C0F:07 > Suspending device PNP0C0F:06 > Suspending device PNP0C0F:05 > Suspending device PNP0C0F:04 > Suspending device PNP0C0F:03 > Suspending device PNP0C0F:02 > Suspending device PNP0C0F:01 > Suspending device PNP0C0F:00 > Suspending device device:32 > Suspending device device:31 > Suspending device device:30 > Suspending device device:2f > Suspending device device:2e > Suspending device device:2d > Suspending device device:2c > Suspending device device:2b > Suspending device device:2a > Suspending device device:29 > Suspending device device:28 > Suspending device device:27 > Suspending device device:26 > Suspending device device:25 > Suspending device device:24 > Suspending device device:23 > Suspending device device:22 > Suspending device device:21 > Suspending device device:20 > Suspending device device:1f > Suspending device device:1e > Suspending device device:1d > Suspending device device:1c > Suspending device device:1b > Suspending device device:1a > Suspending device device:19 > Suspending device device:18 > Suspending device device:17 > Suspending device device:16 > Suspending device device:15 > Suspending device device:14 > Suspending device device:13 > Suspending device device:12 > Suspending device device:11 > Suspending device device:10 > Suspending device PNP0C02:00 > Suspending device PNP0000:00 > Suspending device LNXPOWER:02 > Suspending device SYN0118:00 > Suspending device PNP0303:00 > Suspending device PNP0B00:00 > Suspending device PNP0800:00 > Suspending device PNP0200:00 > Suspending device PNP0100:00 > Suspending device PNP0C04:00 > Suspending device IFX0102:00 > Suspending device LNXPOWER:01 > Suspending device PNP0401:00 > Suspending device PNP0A06:00 > Suspending device PNP0C09:00 > Suspending device device:0f > Suspending device device:0e > Suspending device LNXPOWER:00 > Suspending device device:0d > Suspending device device:0c > Suspending device device:0b > Suspending device device:0a > Suspending device device:09 > Suspending device device:08 > Suspending device device:07 > Suspending device device:06 > Suspending device device:05 > Suspending device device:04 > Suspending device device:03 > Suspending device device:02 > Suspending device LNXVIDEO:00 > Suspending device device:01 > Suspending device PNP0A03:00 > Suspending device PNP0C01:00 > Suspending device device:00 > Suspending device ACPI0007:01 > Suspending device ACPI0007:00 > Suspending device LNXPWRBN:00 > Suspending device LNXSYSTM:00 > Suspending device id > Suspending device vtcon0 > Suspending device platform > Disabling non-boot CPUs ... > CPU0 attaching NULL sched-domain. > CPU1 attaching NULL sched-domain. > CPU 1 is now offline > SMP alternatives: switching to UP code > CPU0 attaching NULL sched-domain. > CPU1 is down > Extended CMOS year: 2000 > swsusp: critical section: > swsusp: Need to copy 149622 pages > swsusp: Normal pages needed: 149622 + 1024 + 36, available pages: 341743 > evxfevnt-0079 [00] enable : System is already in ACPI mode > Extended CMOS year: 2000 > Enabling non-boot CPUs ... > CPU0 attaching NULL sched-domain. > SMP alternatives: switching to SMP code > Booting processor 1/2 APIC 0x1 > Initializing CPU#1 > Calibrating delay using timer specific routine.. 3990.20 BogoMIPS (lpj=7980408) > CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) > CPU: L2 Cache: 512K (64 bytes/line) > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 1 > AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping 02 > Clockevents: could not switch to one-shot mode: lapic is not functional. > CPU0 attaching sched-domain: > Could not switch to high resolution mode on CPU 1 > domain 0: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000001 00000000,00000000,00000000,00000002 > CPU1 attaching sched-domain: > domain 0: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000002 00000000,00000000,00000000,00000001 > CPU1 is up > ACPI: Transitioning device [C34F] to D3 > ACPI: Transitioning device [C34F] to D3 > ACPI: Transitioning device [C350] to D3 > ACPI: Transitioning device [C350] to D3 > PM: Writing back config space on device 0000:00:01.0 at offset 7 (was 2206161, writing 22206161) > PCI: Setting latency timer of device 0000:00:04.0 to 64 > PCI: Setting latency timer of device 0000:00:05.0 to 64 > PCI: Setting latency timer of device 0000:00:06.0 to 64 > PM: Writing back config space on device 0000:00:12.0 at offset 1 (was 2b00003, writing 2b00007) > ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 16 (level, low) -> IRQ 16 > ohci_hcd 0000:00:13.0: PCI legacy resume > ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 19 > ohci_hcd 0000:00:13.1: PCI legacy resume > ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 19 > ehci_hcd 0000:00:13.2: PCI D0, from previous PCI D3 > ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 19 > PM: Writing back config space on device 0000:00:13.2 at offset 1 (was 2b00007, writing 2b00017) > ehci_hcd 0000:00:13.2: lost power, restarting > usb usb1: root hub lost power or was reset > ehci_hcd 0000:00:13.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT > ehci_hcd 0000:00:13.2: MWI active > ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16 > PM: Writing back config space on device 0000:00:14.2 at offset f (was 10a, writing a) > PM: Writing back config space on device 0000:00:14.2 at offset 1 (was 4100006, writing 4100002) > ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16 > PM: Writing back config space on device 0000:00:14.4 at offset 6 (was 40030200, writing 40060200) > PM: Writing back config space on device 0000:30:00.0 at offset 1 (was 100007, writing 100003) > PM: Writing back config space on device 0000:02:04.0 at offset f (was 3c4010a, writing 5c0010a) > PM: Writing back config space on device 0000:02:04.0 at offset 3 (was 824010, writing 82a810) > ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[d4011000-d40117ff] Max Packet=[2048] IR/IT contexts=[4/8] > ACPI: PCI Interrupt 0000:02:04.2[A] -> GSI 20 (level, low) -> IRQ 20 > ACPI: PCI Interrupt 0000:02:04.3[A] -> GSI 20 (level, low) -> IRQ 20 > sd 0:0:0:0: [sda] Starting disk > ata2: SATA link down (SStatus 0 SControl 300) > ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) > ata1.00: configured for UDMA/100 > sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) > sd 0:0:0:0: [sda] Write Protect is off > sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 > hda: selected mode 0x22 > usb usb1: usb resume > ehci_hcd 0000:00:13.2: resume root hub after power loss > hub 1-0:1.0: trying to enable port power on non-switchable hub > usb usb2: usb resume > ohci_hcd 0000:00:13.0: BIOS/SMM active, control 008 > ohci_hcd 0000:00:13.0: OHCI controller state > ohci_hcd 0000:00:13.0: OHCI 1.0, NO legacy support registers > ohci_hcd 0000:00:13.0: control 0x083 HCFS=operational CBSR=3 > ohci_hcd 0000:00:13.0: cmdstatus 0x00000 SOC=0 > ohci_hcd 0000:00:13.0: intrstatus 0x00000004 SF > ohci_hcd 0000:00:13.0: intrenable 0x8000005a MIE RHSC UE RD WDH > ohci_hcd 0000:00:13.0: hcca frame #0005 > ohci_hcd 0000:00:13.0: roothub.a 02000204 POTPGT=2 NPS NDP=4(4) > ohci_hcd 0000:00:13.0: roothub.b 00000000 PPCM=0000 DR=0000 > ohci_hcd 0000:00:13.0: roothub.status 00008000 DRWE > ohci_hcd 0000:00:13.0: roothub.portstatus [0] 0x00000100 PPS > ohci_hcd 0000:00:13.0: roothub.portstatus [1] 0x00010100 CSC PPS > ohci_hcd 0000:00:13.0: roothub.portstatus [2] 0x00000100 PPS > ohci_hcd 0000:00:13.0: roothub.portstatus [3] 0x00000100 PPS > ohci_hcd 0000:00:13.0: restart complete > usb usb2: root hub lost power or was reset > hub 2-0:1.0: trying to enable port power on non-switchable hub > hub 2-0:1.0: logical disconnect on port 2 > usb usb3: usb resume > ohci_hcd 0000:00:13.1: BIOS/SMM active, control 008 > ohci_hcd 0000:00:13.1: OHCI controller state > ohci_hcd 0000:00:13.1: OHCI 1.0, NO legacy support registers > ohci_hcd 0000:00:13.1: control 0x083 HCFS=operational CBSR=3 > ohci_hcd 0000:00:13.1: cmdstatus 0x00000 SOC=0 > ohci_hcd 0000:00:13.1: intrstatus 0x00000004 SF > ohci_hcd 0000:00:13.1: intrenable 0x8000005a MIE RHSC UE RD WDH > ohci_hcd 0000:00:13.1: hcca frame #0005 > ohci_hcd 0000:00:13.1: roothub.a 02000204 POTPGT=2 NPS NDP=4(4) > ohci_hcd 0000:00:13.1: roothub.b 00000000 PPCM=0000 DR=0000 > ohci_hcd 0000:00:13.1: roothub.status 00008000 DRWE > ohci_hcd 0000:00:13.1: roothub.portstatus [0] 0x00010100 CSC PPS > ohci_hcd 0000:00:13.1: roothub.portstatus [1] 0x00000100 PPS > ohci_hcd 0000:00:13.1: roothub.portstatus [2] 0x00010100 CSC PPS > ohci_hcd 0000:00:13.1: roothub.portstatus [3] 0x00000100 PPS > ohci_hcd 0000:00:13.1: restart complete > usb usb3: root hub lost power or was reset > hub 3-0:1.0: trying to enable port power on non-switchable hub > hub 3-0:1.0: logical disconnect on port 1 > hub 3-0:1.0: logical disconnect on port 3 > Restarting tasks ... <7>hub 1-0:1.0: state 7 ports 8 chg 0000 evt 004c > ehci_hcd 0000:00:13.2: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT > hub 1-0:1.0: port 2, status 0501, change 0001, 480 Mb/s > done. > swsusp: Basic memory bitmaps freed > hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x501 > ehci_hcd 0000:00:13.2: port 2 full speed --> companion > ehci_hcd 0000:00:13.2: GetStatus port 2 status 003801 POWER OWNER sig=j CONNECT > hub 1-0:1.0: port 2 not reset yet, waiting 50ms > ehci_hcd 0000:00:13.2: GetStatus port 2 status 003002 POWER OWNER sig=se0 CSC > ehci_hcd 0000:00:13.2: GetStatus port 3 status 001803 POWER sig=j CSC CONNECT > hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s > hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x501 > ehci_hcd 0000:00:13.2: port 3 full speed --> companion > ehci_hcd 0000:00:13.2: GetStatus port 3 status 003801 POWER OWNER sig=j CONNECT > hub 1-0:1.0: port 3 not reset yet, waiting 50ms > ehci_hcd 0000:00:13.2: GetStatus port 3 status 003002 POWER OWNER sig=se0 CSC > ehci_hcd 0000:00:13.2: GetStatus port 6 status 001403 POWER sig=k CSC CONNECT > hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s > hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501 > ehci_hcd 0000:00:13.2: port 6 low speed --> companion > ehci_hcd 0000:00:13.2: GetStatus port 6 status 003002 POWER OWNER sig=se0 CSC > hub 2-0:1.0: state 7 ports 4 chg 0004 evt 0004 > ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [1] = 0x00010101 CSC PPS CCS > hub 2-0:1.0: port 2, status 0101, change 0001, 12 Mb/s > usb 2-2: USB disconnect, address 3 > usb 2-2: unregistering device > usb 2-2: usb_disable_device nuking all URBs > usb 2-2: unregistering interface 2-2:1.0 > usb 2-2:1.0: uevent > usb 2-2:1.0: uevent > usb 2-2: unregistering interface 2-2:1.1 > usb 2-2:1.1: uevent > usb 2-2:1.1: uevent > usb 2-2: unregistering interface 2-2:1.2 > usb 2-2:1.2: uevent > usb 2-2:1.2: uevent > usb 2-2: unregistering interface 2-2:1.3 > usb 2-2:1.3: uevent > usb 2-2:1.3: uevent > usb 2-2: uevent > hub 2-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101 > ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS > usb 2-2: new full speed USB device using ohci_hcd and address 4 > ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS > usb 2-2: skipped 1 descriptor after interface > usb 2-2: default language 0x0409 > usb 2-2: uevent > usb 2-2: usb_probe_device > usb 2-2: configuration #1 chosen from 1 choice > usb 2-2: adding 2-2:1.0 (config #1, interface 0) > usb 2-2:1.0: uevent > usb 2-2:1.0: uevent > hci_usb 2-2:1.0: usb_probe_interface > hci_usb 2-2:1.0: usb_probe_interface - got id > usb 2-2: adding 2-2:1.1 (config #1, interface 1) > usb 2-2:1.1: uevent > usb 2-2:1.1: uevent > usb 2-2: adding 2-2:1.2 (config #1, interface 2) > usb 2-2:1.2: uevent > usb 2-2:1.2: uevent > hci_usb 2-2:1.2: usb_probe_interface > hci_usb 2-2:1.2: usb_probe_interface - got id > usb 2-2: adding 2-2:1.3 (config #1, interface 3) > usb 2-2:1.3: uevent > usb 2-2:1.3: uevent > hci_usb 2-2:1.3: usb_probe_interface > hci_usb 2-2:1.3: usb_probe_interface - got id > /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '004' > usb 2-2: new device found, idVendor=03f0, idProduct=171d > usb 2-2: new device strings: Mfr=1, Product=2, SerialNumber=0 > usb 2-2: Product: HP Integrated Module > usb 2-2: Manufacturer: Broadcom Corp > hub 3-0:1.0: state 7 ports 4 chg 000a evt 000a > ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [0] = 0x00010101 CSC PPS CCS > hub 3-0:1.0: port 1, status 0101, change 0001, 12 Mb/s > usb 3-1: USB disconnect, address 4 > usb 3-1: unregistering device > usb 3-1: usb_disable_device nuking all URBs > usb 3-1: unregistering interface 3-1:1.0 > usb 3-1:1.0: uevent > usb 3-1:1.0: uevent > usb 3-1: uevent > hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 > ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS > usb 3-1: new full speed USB device using ohci_hcd and address 6 > ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS > usb 3-1: ep0 maxpacket = 8 > usb 3-1: default language 0x0409 > usb 3-1: uevent > usb 3-1: usb_probe_device > usb 3-1: configuration #1 chosen from 1 choice > usb 3-1: adding 3-1:1.0 (config #1, interface 0) > usb 3-1:1.0: uevent > usb 3-1:1.0: uevent > /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '006' > usb 3-1: new device found, idVendor=08ff, idProduct=2580 > usb 3-1: new device strings: Mfr=0, Product=1, SerialNumber=0 > usb 3-1: Product: Fingerprint Sensor > ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [2] = 0x00010301 CSC LSDA PPS CCS > hub 3-0:1.0: port 3, status 0301, change 0001, 1.5 Mb/s > usb 3-3: USB disconnect, address 5 > usb 3-3: unregistering device > usb 3-3: usb_disable_device nuking all URBs > usb 3-3: unregistering interface 3-3:1.0 > usb 3-3:1.0: uevent > usb 3-3:1.0: uevent > usb 3-3: unregistering interface 3-3:1.1 > /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/file.c: removing 96 minor > usb 3-3:1.1: uevent > usb 3-3:1.1: uevent > usb 3-3: uevent > hub 3-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x301 > ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [2] = 0x00100303 PRSC LSDA PPS PES CCS > usb 3-3: new low speed USB device using ohci_hcd and address 7 > ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [2] = 0x00100303 PRSC LSDA PPS PES CCS > usb 3-3: skipped 1 descriptor after interface > usb 3-3: skipped 1 descriptor after interface > usb 3-3: default language 0x0409 > usb 3-3: uevent > usb 3-3: usb_probe_device > usb 3-3: configuration #1 chosen from 1 choice > usb 3-3: adding 3-3:1.0 (config #1, interface 0) > usb 3-3:1.0: uevent > usb 3-3:1.0: uevent > usbhid 3-3:1.0: usb_probe_interface > usbhid 3-3:1.0: usb_probe_interface - got id > input: Logitech USB Receiver as /class/input/input10 > input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:13.1-3 > usb 3-3: adding 3-3:1.1 (config #1, interface 1) > usb 3-3:1.1: uevent > usb 3-3:1.1: uevent > usbhid 3-3:1.1: usb_probe_interface > usbhid 3-3:1.1: usb_probe_interface - got id > input: Logitech USB Receiver as /class/input/input11 > /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/file.c: looking for a minor, starting at 96 > input,hiddev96: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:13.1-3 > /home/rafael/src/mm/linux-2.6.23-mm1/drivers/usb/core/inode.c: creating file '007' > usb 3-3: new device found, idVendor=046d, idProduct=c521 > usb 3-3: new device strings: Mfr=1, Product=2, SerialNumber=0 > usb 3-3: Product: USB Receiver > usb 3-3: Manufacturer: Logitech > hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0040 > hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0004 > hub 3-0:1.0: state 7 ports 4 chg 0000 evt 0008 > hub 1-0:1.0: hub_suspend > usb usb1: bus auto-suspend > ehci_hcd 0000:00:13.2: suspend root hub > bcm43xx driver > ACPI: PCI Interrupt 0000:30:00.0[A] -> GSI 18 (level, low) -> IRQ 18 > PCI: Setting latency timer of device 0000:30:00.0 to 64 > bcm43xx: Chip ID 0x4311, rev 0x1 > bcm43xx: Number of cores: 4 > bcm43xx: Core 0: ID 0x800, rev 0x11, vendor 0x4243 > bcm43xx: Core 1: ID 0x812, rev 0xa, vendor 0x4243 > bcm43xx: Core 2: ID 0x817, rev 0x3, vendor 0x4243 > bcm43xx: Core 3: ID 0x820, rev 0x1, vendor 0x4243 > bcm43xx: PHY connected > bcm43xx: Detected PHY: Analog: 4, Type 2, Revision 8 > bcm43xx: Detected Radio: ID: 2205017f (Manuf: 17f Ver: 2050 Rev: 2) > bcm43xx: Radio initialized > bcm43xx: Radio initialized > bcm43xx: PHY connected > bcm43xx: Microcode rev 0x127, pl 0xe (2005-04-18 02:36:27) > bcm43xx: Radio turned on > bcm43xx: Radio enabled by hardware > bcm43xx: Chip initialized > bcm43xx: 32-bit DMA initialized > bcm43xx: Keys cleared > bcm43xx: Selected 802.11 core (phytype 2) > ADDRCONF(NETDEV_UP): eth1: link is not ready > SoftMAC: Scanning finished: scanned 13 channels starting with channel 1 > SoftMAC: Associate: Scanning for networks first. > SoftMAC: Scanning finished: scanned 13 channels starting with channel 1 > SoftMAC: Queueing Authentication Request to 00:17:9a:f3:b5:75 > SoftMAC: Cannot associate without being authenticated, requested authentication > SoftMAC: Sent Authentication Request to 00:17:9a:f3:b5:75. > SoftMAC: Open Authentication completed with 00:17:9a:f3:b5:75 > SoftMAC: sent association request! > SoftMAC: associated! > ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready > SFW2-OUT-ERROR IN= OUT=eth1 SRC=0000:0000:0000:0000:0000:0000:0000:0000 DST=ff02:0000:0000:0000:0000:0000:0000:0016 LEN=76 TC=0 HOPLIMIT=1 FLOWLBL=0 OPT ( ) PROTO=ICMPv6 TYPE=143 CODE=0 > SoftMAC: Getting essid from req_essid > SFW2-OUT-ERROR IN= OUT=eth1 SRC=0000:0000:0000:0000:0000:0000:0000:0000 DST=ff02:0000:0000:0000:0000:0001:ffbe:9531 LEN=64 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=ICMPv6 TYPE=135 CODE=0 > SoftMAC: Getting essid from req_essid > SFW2-OUT-ERROR IN= OUT=eth1 SRC=fe80:0000:0000:0000:0214:a5ff:febe:9531 DST=ff02:0000:0000:0000:0000:0000:0000:0002 LEN=56 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=ICMPv6 TYPE=133 CODE=0 > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SFW2-OUT-ERROR IN= OUT=eth1 SRC=fe80:0000:0000:0000:0214:a5ff:febe:9531 DST=ff02:0000:0000:0000:0000:0000:0000:0016 LEN=76 TC=0 HOPLIMIT=1 FLOWLBL=0 OPT ( ) PROTO=ICMPv6 TYPE=143 CODE=0 > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SFW2-OUT-ERROR IN= OUT=eth1 SRC=fe80:0000:0000:0000:0214:a5ff:febe:9531 DST=ff02:0000:0000:0000:0000:0000:0000:0002 LEN=56 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=ICMPv6 TYPE=133 CODE=0 > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:17:9a:f3:b5:75:08:00 SRC=62.121.83.254 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=19492 PROTO=2 > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SFW2-OUT-ERROR IN= OUT=eth1 SRC=fe80:0000:0000:0000:0214:a5ff:febe:9531 DST=ff02:0000:0000:0000:0000:0000:0000:0002 LEN=56 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=ICMPv6 TYPE=133 CODE=0 > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > eth1: no IPv6 routers present > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() > > Call Trace: > [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9 > [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 > [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 > [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 > [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 > [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 > [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 > [<ffffffff8024ee6d>] update_target+0x71/0x76 > [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0 > [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382 > [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc > [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 > [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f > [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 > [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 > [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 > [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 > [<ffffffff8022f18e>] default_wake_function+0x0/0xf > [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 > [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 > [<ffffffff80282e91>] vma_link+0xdd/0x10b > [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a > [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 > [<ffffffff802a0896>] do_ioctl+0x2a/0x77 > [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e > [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b > [<ffffffff8020bfde>] system_call+0x7e/0x83 > > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() > > Call Trace: > [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82 > [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 > [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 > [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 > [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 > [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 > [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2 > [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 > [<ffffffff8024ee6d>] update_target+0x71/0x76 > [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2 > [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382 > [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc > [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 > [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f > [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 > [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 > [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 > [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 > [<ffffffff8022f18e>] default_wake_function+0x0/0xf > [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 > [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 > [<ffffffff80282e91>] vma_link+0xdd/0x10b > [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a > [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 > [<ffffffff802a0896>] do_ioctl+0x2a/0x77 > [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e > [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b > [<ffffffff8020bfde>] system_call+0x7e/0x83 > > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() > > Call Trace: > [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9 > [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 > [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 > [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 > [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 > [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 > [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 > [<ffffffff8024ee6d>] update_target+0x71/0x76 > [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0 > [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382 > [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc > [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 > [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f > [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 > [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 > [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 > [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 > [<ffffffff8022f18e>] default_wake_function+0x0/0xf > [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 > [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 > [<ffffffff80282e91>] vma_link+0xdd/0x10b > [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a > [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 > [<ffffffff802a0896>] do_ioctl+0x2a/0x77 > [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e > [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b > [<ffffffff8020bfde>] system_call+0x7e/0x83 > > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() > > Call Trace: > [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82 > [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 > [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 > [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 > [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 > [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 > [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2 > [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 > [<ffffffff8024ee6d>] update_target+0x71/0x76 > [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2 > [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382 > [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc > [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 > [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f > [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 > [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 > [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 > [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 > [<ffffffff8022f18e>] default_wake_function+0x0/0xf > [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 > [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 > [<ffffffff80282e91>] vma_link+0xdd/0x10b > [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a > [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 > [<ffffffff802a0896>] do_ioctl+0x2a/0x77 > [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e > [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b > [<ffffffff8020bfde>] system_call+0x7e/0x83 > > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:17:9a:f3:b5:75:08:00 SRC=62.121.83.254 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=21260 PROTO=2 > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:17:9a:f3:b5:75:08:00 SRC=62.121.83.254 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=23324 PROTO=2 > SoftMAC: Getting essid from req_essid > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() > > Call Trace: > [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9 > [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 > [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 > [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 > [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 > [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 > [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 > [<ffffffff8024ee6d>] update_target+0x71/0x76 > [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0 > [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382 > [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc > [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 > [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f > [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 > [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 > [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 > [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 > [<ffffffff8022f18e>] default_wake_function+0x0/0xf > [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 > [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 > [<ffffffff80282e91>] vma_link+0xdd/0x10b > [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a > [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 > [<ffffffff802a0896>] do_ioctl+0x2a/0x77 > [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e > [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b > [<ffffffff8020bfde>] system_call+0x7e/0x83 > > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() > > Call Trace: > [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82 > [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 > [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 > [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 > [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 > [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 > [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2 > [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 > [<ffffffff8024ee6d>] update_target+0x71/0x76 > [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2 > [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382 > [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc > [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 > [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f > [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 > [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 > [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 > [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 > [<ffffffff8022f18e>] default_wake_function+0x0/0xf > [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 > [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 > [<ffffffff80282e91>] vma_link+0xdd/0x10b > [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a > [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 > [<ffffffff802a0896>] do_ioctl+0x2a/0x77 > [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e > [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b > [<ffffffff8020bfde>] system_call+0x7e/0x83 > > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() > > Call Trace: > [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9 > [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 > [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 > [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 > [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 > [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 > [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 > [<ffffffff8024ee6d>] update_target+0x71/0x76 > [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0 > [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382 > [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc > [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 > [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f > [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 > [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 > [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 > [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 > [<ffffffff8022f18e>] default_wake_function+0x0/0xf > [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 > [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 > [<ffffffff80282e91>] vma_link+0xdd/0x10b > [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a > [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 > [<ffffffff802a0896>] do_ioctl+0x2a/0x77 > [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e > [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b > [<ffffffff8020bfde>] system_call+0x7e/0x83 > > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() > > Call Trace: > [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82 > [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 > [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 > [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 > [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 > [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 > [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2 > [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 > [<ffffffff8024ee6d>] update_target+0x71/0x76 > [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2 > [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382 > [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc > [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 > [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f > [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 > [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 > [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 > [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 > [<ffffffff8022f18e>] default_wake_function+0x0/0xf > [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 > [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 > [<ffffffff80282e91>] vma_link+0xdd/0x10b > [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a > [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 > [<ffffffff802a0896>] do_ioctl+0x2a/0x77 > [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e > [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b > [<ffffffff8020bfde>] system_call+0x7e/0x83 > > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() > > Call Trace: > [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9 > [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 > [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 > [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 > [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 > [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 > [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 > [<ffffffff8024ee6d>] update_target+0x71/0x76 > [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0 > [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382 > [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc > [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 > [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f > [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 > [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 > [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 > [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 > [<ffffffff8022f18e>] default_wake_function+0x0/0xf > [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 > [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 > [<ffffffff80282e91>] vma_link+0xdd/0x10b > [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a > [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 > [<ffffffff802a0896>] do_ioctl+0x2a/0x77 > [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e > [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b > [<ffffffff8020bfde>] system_call+0x7e/0x83 > > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() > > Call Trace: > [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82 > [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 > [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 > [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 > [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 > [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 > [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2 > [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 > [<ffffffff8024ee6d>] update_target+0x71/0x76 > [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2 > [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382 > [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc > [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 > [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f > [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 > [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 > [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 > [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 > [<ffffffff8022f18e>] default_wake_function+0x0/0xf > [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 > [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 > [<ffffffff80282e91>] vma_link+0xdd/0x10b > [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a > [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 > [<ffffffff802a0896>] do_ioctl+0x2a/0x77 > [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e > [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b > [<ffffffff8020bfde>] system_call+0x7e/0x83 > > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() > > Call Trace: > [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9 > [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 > [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 > [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 > [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 > [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 > [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 > [<ffffffff8024ee6d>] update_target+0x71/0x76 > [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0 > [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382 > [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc > [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 > [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f > [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 > [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 > [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 > [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 > [<ffffffff8022f18e>] default_wake_function+0x0/0xf > [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 > [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 > [<ffffffff80282e91>] vma_link+0xdd/0x10b > [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a > [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 > [<ffffffff802a0896>] do_ioctl+0x2a/0x77 > [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e > [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b > [<ffffffff8020bfde>] system_call+0x7e/0x83 > > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() > > Call Trace: > [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82 > [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 > [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 > [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 > [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 > [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 > [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2 > [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 > [<ffffffff8024ee6d>] update_target+0x71/0x76 > [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2 > [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382 > [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc > [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 > [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f > [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 > [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 > [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 > [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 > [<ffffffff8022f18e>] default_wake_function+0x0/0xf > [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 > [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 > [<ffffffff80282e91>] vma_link+0xdd/0x10b > [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a > [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 > [<ffffffff802a0896>] do_ioctl+0x2a/0x77 > [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e > [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b > [<ffffffff8020bfde>] system_call+0x7e/0x83 > > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() > > Call Trace: > [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9 > [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 > [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 > [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 > [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 > [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 > [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 > [<ffffffff8024ee6d>] update_target+0x71/0x76 > [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0 > [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382 > [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc > [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 > [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f > [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 > [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 > [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 > [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 > [<ffffffff8022f18e>] default_wake_function+0x0/0xf > [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 > [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 > [<ffffffff80282e91>] vma_link+0xdd/0x10b > [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a > [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 > [<ffffffff802a0896>] do_ioctl+0x2a/0x77 > [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e > [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b > [<ffffffff8020bfde>] system_call+0x7e/0x83 > > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() > > Call Trace: > [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82 > [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 > [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 > [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 > [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 > [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 > [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2 > [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 > [<ffffffff8024ee6d>] update_target+0x71/0x76 > [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2 > [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382 > [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc > [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 > [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f > [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 > [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 > [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 > [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 > [<ffffffff8022f18e>] default_wake_function+0x0/0xf > [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 > [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 > [<ffffffff80282e91>] vma_link+0xdd/0x10b > [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a > [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 > [<ffffffff802a0896>] do_ioctl+0x2a/0x77 > [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e > [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b > [<ffffffff8020bfde>] system_call+0x7e/0x83 > > SoftMAC: Getting essid from req_essid > SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:17:9a:f3:b5:75:08:00 SRC=62.121.83.254 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=25180 PROTO=2 > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() > > Call Trace: > [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9 > [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 > [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 > [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 > [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 > [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 > [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 > [<ffffffff8024ee6d>] update_target+0x71/0x76 > [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0 > [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382 > [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc > [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 > [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f > [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 > [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 > [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 > [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 > [<ffffffff8022f18e>] default_wake_function+0x0/0xf > [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 > [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 > [<ffffffff80282e91>] vma_link+0xdd/0x10b > [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a > [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 > [<ffffffff802a0896>] do_ioctl+0x2a/0x77 > [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e > [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b > [<ffffffff8020bfde>] system_call+0x7e/0x83 > > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() > > Call Trace: > [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 > [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 > [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 > [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 > [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 > [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2 > [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 > [<ffffffff8024ee6d>] update_target+0x71/0x76 > [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2 > [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382 > [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc > [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 > [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f > [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 > [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 > [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 > [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 > [<ffffffff8022f18e>] default_wake_function+0x0/0xf > [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 > [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 > [<ffffffff80282e91>] vma_link+0xdd/0x10b > [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a > [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 > [<ffffffff802a0896>] do_ioctl+0x2a/0x77 > [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e > [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b > [<ffffffff8020bfde>] system_call+0x7e/0x83 > > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() > > Call Trace: > [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9 > [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 > [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 > [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 > [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 > [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 > [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 > [<ffffffff8024ee6d>] update_target+0x71/0x76 > [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0 > [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382 > [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc > [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 > [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f > [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 > [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 > [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 > [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 > [<ffffffff8022f18e>] default_wake_function+0x0/0xf > [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 > [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 > [<ffffffff80282e91>] vma_link+0xdd/0x10b > [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a > [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 > [<ffffffff802a0896>] do_ioctl+0x2a/0x77 > [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e > [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b > [<ffffffff8020bfde>] system_call+0x7e/0x83 > > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() > > Call Trace: > [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82 > [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 > [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 > [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 > [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 > [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 > [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2 > [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 > [<ffffffff8024ee6d>] update_target+0x71/0x76 > [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2 > [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382 > [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc > [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 > [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f > [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 > [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 > [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 > [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 > [<ffffffff8022f18e>] default_wake_function+0x0/0xf > [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 > [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 > [<ffffffff80282e91>] vma_link+0xdd/0x10b > [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a > [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 > [<ffffffff802a0896>] do_ioctl+0x2a/0x77 > [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e > [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b > [<ffffffff8020bfde>] system_call+0x7e/0x83 > > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() > > Call Trace: > [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9 > [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 > [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 > [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 > [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 > [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 > [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 > [<ffffffff8024ee6d>] update_target+0x71/0x76 > [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0 > [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382 > [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc > [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 > [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f > [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 > [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 > [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 > [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 > [<ffffffff8022f18e>] default_wake_function+0x0/0xf > [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 > [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 > [<ffffffff80282e91>] vma_link+0xdd/0x10b > [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a > [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 > [<ffffffff802a0896>] do_ioctl+0x2a/0x77 > [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e > [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b > [<ffffffff8020bfde>] system_call+0x7e/0x83 > > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() > > Call Trace: > [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 > [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 > [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 > [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 > [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 > [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2 > [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 > [<ffffffff8024ee6d>] update_target+0x71/0x76 > [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2 > [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382 > [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc > [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 > [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f > [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 > [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 > [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 > [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 > [<ffffffff8022f18e>] default_wake_function+0x0/0xf > [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 > [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 > [<ffffffff80282e91>] vma_link+0xdd/0x10b > [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a > [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 > [<ffffffff802a0896>] do_ioctl+0x2a/0x77 > [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e > [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b > [<ffffffff8020bfde>] system_call+0x7e/0x83 > > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:17:9a:f3:b5:75:08:00 SRC=62.121.83.254 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=26892 PROTO=2 > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() > > Call Trace: > [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9 > [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 > [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 > [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 > [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 > [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 > [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 > [<ffffffff8024ee6d>] update_target+0x71/0x76 > [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0 > [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382 > [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc > [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 > [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f > [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 > [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 > [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 > [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 > [<ffffffff8022f18e>] default_wake_function+0x0/0xf > [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 > [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 > [<ffffffff80282e91>] vma_link+0xdd/0x10b > [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a > [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 > [<ffffffff802a0896>] do_ioctl+0x2a/0x77 > [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e > [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b > [<ffffffff8020bfde>] system_call+0x7e/0x83 > > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() > > Call Trace: > [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 > [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 > [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 > [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 > [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 > [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2 > [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 > [<ffffffff8024ee6d>] update_target+0x71/0x76 > [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2 > [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382 > [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc > [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 > [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f > [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 > [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 > [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 > [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 > [<ffffffff8022f18e>] default_wake_function+0x0/0xf > [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 > [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 > [<ffffffff80282e91>] vma_link+0xdd/0x10b > [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a > [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 > [<ffffffff802a0896>] do_ioctl+0x2a/0x77 > [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e > [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b > [<ffffffff8020bfde>] system_call+0x7e/0x83 > > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() > > Call Trace: > [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9 > [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 > [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 > [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 > [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 > [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 > [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 > [<ffffffff8024ee6d>] update_target+0x71/0x76 > [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0 > [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382 > [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc > [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 > [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f > [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 > [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 > [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 > [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 > [<ffffffff8022f18e>] default_wake_function+0x0/0xf > [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 > [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 > [<ffffffff80282e91>] vma_link+0xdd/0x10b > [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a > [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 > [<ffffffff802a0896>] do_ioctl+0x2a/0x77 > [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e > [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b > [<ffffffff8020bfde>] system_call+0x7e/0x83 > > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() > > Call Trace: > [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82 > [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 > [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 > [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 > [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 > [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 > [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2 > [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 > [<ffffffff8024ee6d>] update_target+0x71/0x76 > [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2 > [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382 > [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc > [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 > [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f > [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 > [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 > [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 > [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 > [<ffffffff8022f18e>] default_wake_function+0x0/0xf > [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 > [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 > [<ffffffff80282e91>] vma_link+0xdd/0x10b > [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a > [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 > [<ffffffff802a0896>] do_ioctl+0x2a/0x77 > [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e > [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b > [<ffffffff8020bfde>] system_call+0x7e/0x83 > > SoftMAC: Getting essid from req_essid > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() > > Call Trace: > [<ffffffff88160769>] :snd_pcm:snd_pcm_hw_refine+0x292/0x3d9 > [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 > [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 > [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 > [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 > [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 > [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 > [<ffffffff8024ee6d>] update_target+0x71/0x76 > [<ffffffff8024eef4>] pm_qos_remove_requirement+0x82/0xc0 > [<ffffffff88160bbe>] :snd_pcm:snd_pcm_hw_params+0x30e/0x382 > [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc > [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 > [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f > [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 > [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 > [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 > [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 > [<ffffffff8022f18e>] default_wake_function+0x0/0xf > [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 > [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 > [<ffffffff80282e91>] vma_link+0xdd/0x10b > [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a > [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 > [<ffffffff802a0896>] do_ioctl+0x2a/0x77 > [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e > [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b > [<ffffffff8020bfde>] system_call+0x7e/0x83 > > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() > > Call Trace: > [<ffffffff8021b2b2>] smp_call_function_mask+0x6d/0x82 > [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 > [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 > [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 > [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 > [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 > [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2 > [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 > [<ffffffff8024ee6d>] update_target+0x71/0x76 > [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2 > [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382 > [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc > [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 > [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f > [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 > [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 > [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 > [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 > [<ffffffff8022f18e>] default_wake_function+0x0/0xf > [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 > [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 > [<ffffffff80282e91>] vma_link+0xdd/0x10b > [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a > [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 > [<ffffffff802a0896>] do_ioctl+0x2a/0x77 > [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e > [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b > [<ffffffff8020bfde>] system_call+0x7e/0x83 > > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid > SoftMAC: Getting essid from req_essid ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: 2.6.23-mm1 2007-10-15 16:09 ` 2.6.23-mm1 Mark Gross @ 2007-10-15 20:40 ` Rafael J. Wysocki 2007-10-16 19:58 ` 2.6.23-mm1 Mark Gross 0 siblings, 1 reply; 8+ messages in thread From: Rafael J. Wysocki @ 2007-10-15 20:40 UTC (permalink / raw) To: mgross Cc: Andrew Morton, linux-kernel, ACPI Devel Maling List, Len Brown, Arjan van de Ven On Monday, 15 October 2007 18:09, Mark Gross wrote: > On Fri, Oct 12, 2007 at 11:32:40PM +0200, Rafael J. Wysocki wrote: > > On Friday, 12 October 2007 06:31, Andrew Morton wrote: > > > > > > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.23/2.6.23-mm1/ > > > > > > - I've been largely avoiding applying anything since rc8-mm2 in an attempt > > > to stabilise things for the 2.6.23 merge. > > > > > > But that didn't stop all the subsystem maintainers from going nuts, with > > > the usual accuracy. We're up to a 37MB diff now, but it seems to be working > > > a bit better. > > > > I get many traces similar to the one below from it (w/ hotfixes): > > > > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() > > This is from : WARN_ON(irqs_disabled()) in the cmp_call_function_mask > processor_idle.c is registering a acpi_processor_latency_notify > > my code changed the notifier call from blocking_notifier_call_chain to > srcu_notifier_call_chain, because dynamic creation of notifier chains at > runtime where easier with the srcu_notifier_call_chain than the > blocking_notifier_call_chain. > > As dynamic creation of PM_QOS parameters are no longer needed I can > change the notifiers back to match what was in lanency.c > > However; looking at the call tree differences between > blockin_notifier_call_chain and srcu_notifier_call_chain I cannot see a > difference in irq enabling / disabling. I'm not confident this will > address this yet. Well, you can send me a patch to check. :-) > I'll change the PM_QOS params patch to use blocking notifiers and test > on a 64bit boot and see what happens. I've been needing to setup my > x86_64 dev box for a while now anyway. OK, thanks. Greetings, Rafael ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: 2.6.23-mm1 2007-10-15 20:40 ` 2.6.23-mm1 Rafael J. Wysocki @ 2007-10-16 19:58 ` Mark Gross 2007-10-16 20:28 ` 2.6.23-mm1 Rafael J. Wysocki 0 siblings, 1 reply; 8+ messages in thread From: Mark Gross @ 2007-10-16 19:58 UTC (permalink / raw) To: Rafael J. Wysocki Cc: Andrew Morton, linux-kernel, ACPI Devel Maling List, Len Brown, Arjan van de Ven On Mon, Oct 15, 2007 at 10:40:02PM +0200, Rafael J. Wysocki wrote: > On Monday, 15 October 2007 18:09, Mark Gross wrote: > > On Fri, Oct 12, 2007 at 11:32:40PM +0200, Rafael J. Wysocki wrote: > > > On Friday, 12 October 2007 06:31, Andrew Morton wrote: > > > > > > > > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.23/2.6.23-mm1/ > > > > > > > > - I've been largely avoiding applying anything since rc8-mm2 in an attempt > > > > to stabilise things for the 2.6.23 merge. > > > > > > > > But that didn't stop all the subsystem maintainers from going nuts, with > > > > the usual accuracy. We're up to a 37MB diff now, but it seems to be working > > > > a bit better. > > > > > > I get many traces similar to the one below from it (w/ hotfixes): > > > > > > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() > > > > This is from : WARN_ON(irqs_disabled()) in the cmp_call_function_mask > > processor_idle.c is registering a acpi_processor_latency_notify > > > > my code changed the notifier call from blocking_notifier_call_chain to > > srcu_notifier_call_chain, because dynamic creation of notifier chains at > > runtime where easier with the srcu_notifier_call_chain than the > > blocking_notifier_call_chain. > > > > As dynamic creation of PM_QOS parameters are no longer needed I can > > change the notifiers back to match what was in lanency.c > > > > However; looking at the call tree differences between > > blockin_notifier_call_chain and srcu_notifier_call_chain I cannot see a > > difference in irq enabling / disabling. I'm not confident this will > > address this yet. > > Well, you can send me a patch to check. :-) I think I'll have to send you a patch that changes the notifiers but I doubt it will fix it. After a bit of messing around I have the 2.6.23-mm1 running on my core-2 box note: Ubuntu's make-kpkg on the mm1 tree resulted in a system that wouldn't boot past the intrd. Looks like the pivot root failed or something. Anyway, I'm not reproducing your experience, snd_pcm is loaded. I don't know none of the WARN's are not hitting on my box. do you have some configuration information that could help me reproduce the issue? > > > I'll change the PM_QOS params patch to use blocking notifiers and test > > on a 64bit boot and see what happens. I've been needing to setup my > > x86_64 dev box for a while now anyway. > > OK, thanks. well its booting but I'm not reproducing the trace messages. I'll do the patch for you to test. --mgross ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: 2.6.23-mm1 2007-10-16 19:58 ` 2.6.23-mm1 Mark Gross @ 2007-10-16 20:28 ` Rafael J. Wysocki 2007-10-16 23:31 ` 2.6.23-mm1 Mark Gross 2007-10-17 21:15 ` [PATCH] static initialization with blocking notifiers. was :wqRe: 2.6.23-mm1 Mark Gross 0 siblings, 2 replies; 8+ messages in thread From: Rafael J. Wysocki @ 2007-10-16 20:28 UTC (permalink / raw) To: mgross Cc: Andrew Morton, linux-kernel, ACPI Devel Maling List, Len Brown, Arjan van de Ven On Tuesday, 16 October 2007 21:58, Mark Gross wrote: > On Mon, Oct 15, 2007 at 10:40:02PM +0200, Rafael J. Wysocki wrote: > > On Monday, 15 October 2007 18:09, Mark Gross wrote: > > > On Fri, Oct 12, 2007 at 11:32:40PM +0200, Rafael J. Wysocki wrote: > > > > On Friday, 12 October 2007 06:31, Andrew Morton wrote: > > > > > > > > > > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.23/2.6.23-mm1/ > > > > > > > > > > - I've been largely avoiding applying anything since rc8-mm2 in an attempt > > > > > to stabilise things for the 2.6.23 merge. > > > > > > > > > > But that didn't stop all the subsystem maintainers from going nuts, with > > > > > the usual accuracy. We're up to a 37MB diff now, but it seems to be working > > > > > a bit better. > > > > > > > > I get many traces similar to the one below from it (w/ hotfixes): > > > > > > > > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() > > > > > > This is from : WARN_ON(irqs_disabled()) in the cmp_call_function_mask > > > processor_idle.c is registering a acpi_processor_latency_notify > > > > > > my code changed the notifier call from blocking_notifier_call_chain to > > > srcu_notifier_call_chain, because dynamic creation of notifier chains at > > > runtime where easier with the srcu_notifier_call_chain than the > > > blocking_notifier_call_chain. > > > > > > As dynamic creation of PM_QOS parameters are no longer needed I can > > > change the notifiers back to match what was in lanency.c > > > > > > However; looking at the call tree differences between > > > blockin_notifier_call_chain and srcu_notifier_call_chain I cannot see a > > > difference in irq enabling / disabling. I'm not confident this will > > > address this yet. > > > > Well, you can send me a patch to check. :-) > > I think I'll have to send you a patch that changes the notifiers but I > doubt it will fix it. > > After a bit of messing around I have the 2.6.23-mm1 running on my core-2 > box note: Ubuntu's make-kpkg on the mm1 tree resulted in a system that > wouldn't boot past the intrd. Looks like the pivot root failed or > something. > > Anyway, I'm not reproducing your experience, snd_pcm is loaded. I don't > know none of the WARN's are not hitting on my box. > > do you have some configuration information that could help me reproduce > the issue? Well, I can send you the .config, but the box is AMD-based (Turion 64 X2), with an ATI chipset and an HP BIOS, so it seems to be much different from yours. Greetings, Rafael ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: 2.6.23-mm1 2007-10-16 20:28 ` 2.6.23-mm1 Rafael J. Wysocki @ 2007-10-16 23:31 ` Mark Gross 2007-10-17 21:15 ` [PATCH] static initialization with blocking notifiers. was :wqRe: 2.6.23-mm1 Mark Gross 1 sibling, 0 replies; 8+ messages in thread From: Mark Gross @ 2007-10-16 23:31 UTC (permalink / raw) To: Rafael J. Wysocki Cc: Andrew Morton, linux-kernel, ACPI Devel Maling List, Len Brown, Arjan van de Ven On Tue, Oct 16, 2007 at 10:28:13PM +0200, Rafael J. Wysocki wrote: > On Tuesday, 16 October 2007 21:58, Mark Gross wrote: > > On Mon, Oct 15, 2007 at 10:40:02PM +0200, Rafael J. Wysocki wrote: > > > On Monday, 15 October 2007 18:09, Mark Gross wrote: > > > > On Fri, Oct 12, 2007 at 11:32:40PM +0200, Rafael J. Wysocki wrote: > > > > > On Friday, 12 October 2007 06:31, Andrew Morton wrote: > > > > > > > > > > > > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.23/2.6.23-mm1/ > > > > > > > > > > > > - I've been largely avoiding applying anything since rc8-mm2 in an attempt > > > > > > to stabilise things for the 2.6.23 merge. > > > > > > > > > > > > But that didn't stop all the subsystem maintainers from going nuts, with > > > > > > the usual accuracy. We're up to a 37MB diff now, but it seems to be working > > > > > > a bit better. > > > > > > > > > > I get many traces similar to the one below from it (w/ hotfixes): > > > > > > > > > > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() > > > > > > > > This is from : WARN_ON(irqs_disabled()) in the cmp_call_function_mask > > > > processor_idle.c is registering a acpi_processor_latency_notify > > > > > > > > my code changed the notifier call from blocking_notifier_call_chain to > > > > srcu_notifier_call_chain, because dynamic creation of notifier chains at > > > > runtime where easier with the srcu_notifier_call_chain than the > > > > blocking_notifier_call_chain. > > > > > > > > As dynamic creation of PM_QOS parameters are no longer needed I can > > > > change the notifiers back to match what was in lanency.c > > > > > > > > However; looking at the call tree differences between > > > > blockin_notifier_call_chain and srcu_notifier_call_chain I cannot see a > > > > difference in irq enabling / disabling. I'm not confident this will > > > > address this yet. > > > > > > Well, you can send me a patch to check. :-) > > > > I think I'll have to send you a patch that changes the notifiers but I > > doubt it will fix it. > > > > After a bit of messing around I have the 2.6.23-mm1 running on my core-2 > > box note: Ubuntu's make-kpkg on the mm1 tree resulted in a system that > > wouldn't boot past the intrd. Looks like the pivot root failed or > > something. > > > > Anyway, I'm not reproducing your experience, snd_pcm is loaded. I don't > > know none of the WARN's are not hitting on my box. > > > > do you have some configuration information that could help me reproduce > > the issue? > > Well, I can send you the .config, but the box is AMD-based (Turion 64 X2), > with an ATI chipset and an HP BIOS, so it seems to be much different from > yours. it may be worth a shot anyway. BTW while changing my code to use the blocking notifiers I found that there is a initialization race between cpu-idle and pm_qos I have to fix. I need to re factor my start up code to handle cpuidle registering itself in as a notifier at core_initcall time. I'll have a patch ready tomorrow. thanks, --mgross ^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH] static initialization with blocking notifiers. was :wqRe: 2.6.23-mm1 2007-10-16 20:28 ` 2.6.23-mm1 Rafael J. Wysocki 2007-10-16 23:31 ` 2.6.23-mm1 Mark Gross @ 2007-10-17 21:15 ` Mark Gross 1 sibling, 0 replies; 8+ messages in thread From: Mark Gross @ 2007-10-17 21:15 UTC (permalink / raw) To: Rafael J. Wysocki Cc: Andrew Morton, linux-kernel, ACPI Devel Maling List, Len Brown, Arjan van de Ven I didn't see my patch show up on the list so I'm resending it. On Wed, Oct 17, 2007 at 01:53:48AM +0200, Rafael J. Wysocki wrote: > On Wednesday, 17 October 2007 01:31, Mark Gross wrote: > > On Tue, Oct 16, 2007 at 10:28:13PM +0200, Rafael J. Wysocki wrote: > > > On Tuesday, 16 October 2007 21:58, Mark Gross wrote: > > > > On Mon, Oct 15, 2007 at 10:40:02PM +0200, Rafael J. Wysocki wrote: > > > > > On Monday, 15 October 2007 18:09, Mark Gross wrote: > > > > > > On Fri, Oct 12, 2007 at 11:32:40PM +0200, Rafael J. Wysocki wrote: > > > > > > > On Friday, 12 October 2007 06:31, Andrew Morton wrote: > > > > > > > > > > > > > > > > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.23/2.6.23-mm1/ > > > > > > > > > > > > > > > > - I've been largely avoiding applying anything since rc8-mm2 in an attempt > > > > > > > > to stabilise things for the 2.6.23 merge. > > > > > > > > > > > > > > > > But that didn't stop all the subsystem maintainers from going nuts, with > > > > > > > > the usual accuracy. We're up to a 37MB diff now, but it seems to be working > > > > > > > > a bit better. > > > > > > > > > > > > > > I get many traces similar to the one below from it (w/ hotfixes): > > > > > > > > > > > > > > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() > > > > > > > > > > > > This is from : WARN_ON(irqs_disabled()) in the cmp_call_function_mask > > > > > > processor_idle.c is registering a acpi_processor_latency_notify > > > > > > > > > > > > my code changed the notifier call from blocking_notifier_call_chain to > > > > > > srcu_notifier_call_chain, because dynamic creation of notifier chains at > > > > > > runtime where easier with the srcu_notifier_call_chain than the > > > > > > blocking_notifier_call_chain. > > > > > > > > > > > > As dynamic creation of PM_QOS parameters are no longer needed I can > > > > > > change the notifiers back to match what was in lanency.c > > > > > > > > > > > > However; looking at the call tree differences between > > > > > > blockin_notifier_call_chain and srcu_notifier_call_chain I cannot see a > > > > > > difference in irq enabling / disabling. I'm not confident this will > > > > > > address this yet. > > > > > > > > > > Well, you can send me a patch to check. :-) The following is a patch to update the pm_qos code in the mm1 tree. It removes the PM_QOS_CPUIDLE parameter (replacing it with PM_CPU_DMA_LATENCY), It changes the notifications from srcu to blocking in hopes of fixing the WARNS reported by xxx, and it changes the initialization to me largely static to avoid initialization race with cpu-idle. I think we will have to re-visit the static vrs dynamic initialization and this init race in a while to support pm_qos parameters per power domain (i.e. per cpu-socket) based on platform information (ACPI) but for now lets see if this fixes the warning's reported. Thanks, Signed-off-by: mark gross <mgross@linux.intel.com> Binary files linux-2.6.23-mm1/arch/x86_64/ia32/vsyscall-syscall.so.dbg and linux-2.6.23-mm1-pmqos/arch/x86_64/ia32/vsyscall-syscall.so.dbg differ Binary files linux-2.6.23-mm1/arch/x86_64/ia32/vsyscall-sysenter.so.dbg and linux-2.6.23-mm1-pmqos/arch/x86_64/ia32/vsyscall-sysenter.so.dbg differ Binary files linux-2.6.23-mm1/arch/x86_64/vdso/vdso.so.dbg and linux-2.6.23-mm1-pmqos/arch/x86_64/vdso/vdso.so.dbg differ diff -urN -X linux-2.6.23-mm1/Documentation/dontdiff linux-2.6.23-mm1/drivers/cpuidle/cpuidle.c linux-2.6.23-mm1-pmqos/drivers/cpuidle/cpuidle.c --- linux-2.6.23-mm1/drivers/cpuidle/cpuidle.c 2007-10-16 15:03:30.000000000 -0700 +++ linux-2.6.23-mm1-pmqos/drivers/cpuidle/cpuidle.c 2007-10-17 09:26:21.000000000 -0700 @@ -268,7 +268,7 @@ static inline void latency_notifier_init(struct notifier_block *n) { - pm_qos_add_notifier(PM_QOS_CPUIDLE, n); + pm_qos_add_notifier(PM_QOS_CPU_DMA_LATENCY, n); } #else /* CONFIG_SMP */ diff -urN -X linux-2.6.23-mm1/Documentation/dontdiff linux-2.6.23-mm1/drivers/cpuidle/governors/ladder.c linux-2.6.23-mm1-pmqos/drivers/cpuidle/governors/ladder.c --- linux-2.6.23-mm1/drivers/cpuidle/governors/ladder.c 2007-10-16 15:03:30.000000000 -0700 +++ linux-2.6.23-mm1-pmqos/drivers/cpuidle/governors/ladder.c 2007-10-17 09:26:21.000000000 -0700 @@ -82,7 +82,7 @@ if (last_idx < dev->state_count - 1 && last_residency > last_state->threshold.promotion_time && dev->states[last_idx + 1].exit_latency <= - pm_qos_requirement(PM_QOS_CPUIDLE)) { + pm_qos_requirement(PM_QOS_CPU_DMA_LATENCY)) { last_state->stats.promotion_count++; last_state->stats.demotion_count = 0; if (last_state->stats.promotion_count >= last_state->threshold.promotion_count) { diff -urN -X linux-2.6.23-mm1/Documentation/dontdiff linux-2.6.23-mm1/drivers/cpuidle/governors/menu.c linux-2.6.23-mm1-pmqos/drivers/cpuidle/governors/menu.c --- linux-2.6.23-mm1/drivers/cpuidle/governors/menu.c 2007-10-16 15:03:30.000000000 -0700 +++ linux-2.6.23-mm1-pmqos/drivers/cpuidle/governors/menu.c 2007-10-17 09:26:21.000000000 -0700 @@ -48,7 +48,7 @@ break; if (s->target_residency > data->predicted_us) break; - if (s->exit_latency > pm_qos_requirement(PM_QOS_CPUIDLE)) + if (s->exit_latency > pm_qos_requirement(PM_QOS_CPU_DMA_LATENCY)) break; } diff -urN -X linux-2.6.23-mm1/Documentation/dontdiff linux-2.6.23-mm1/include/linux/pm_qos_params.h linux-2.6.23-mm1-pmqos/include/linux/pm_qos_params.h --- linux-2.6.23-mm1/include/linux/pm_qos_params.h 2007-10-16 15:04:26.000000000 -0700 +++ linux-2.6.23-mm1-pmqos/include/linux/pm_qos_params.h 2007-10-17 09:54:00.000000000 -0700 @@ -6,23 +6,12 @@ #include <linux/notifier.h> #include <linux/miscdevice.h> -struct requirement_list { - struct list_head list; - union { - s32 value; - s32 usec; - s32 kbps; - }; - char *name; -}; - #define PM_QOS_RESERVED 0 #define PM_QOS_CPU_DMA_LATENCY 1 #define PM_QOS_NETWORK_LATENCY 2 #define PM_QOS_NETWORK_THROUGHPUT 3 -#define PM_QOS_CPUIDLE 4 -#define PM_QOS_NUM_CLASSES 5 +#define PM_QOS_NUM_CLASSES 4 #define PM_QOS_DEFAULT_VALUE -1 int pm_qos_add_requirement(int qos, char *name, s32 value); diff -urN -X linux-2.6.23-mm1/Documentation/dontdiff linux-2.6.23-mm1/kernel/pm_qos_params.c linux-2.6.23-mm1-pmqos/kernel/pm_qos_params.c --- linux-2.6.23-mm1/kernel/pm_qos_params.c 2007-10-16 15:04:27.000000000 -0700 +++ linux-2.6.23-mm1-pmqos/kernel/pm_qos_params.c 2007-10-17 09:24:46.000000000 -0700 @@ -46,17 +46,70 @@ * or pm_qos_object list and pm_qos_objects need to happen with pm_qos_lock * held, taken with _irqsave. One lock to rule them all */ +struct requirement_list { + struct list_head list; + union { + s32 value; + s32 usec; + s32 kbps; + }; + char *name; +}; + +static s32 max_compare(s32 v1, s32 v2); +static s32 min_compare(s32 v1, s32 v2); struct pm_qos_object { struct requirement_list requirements; - struct srcu_notifier_head notifiers; + struct blocking_notifier_head *notifiers; struct miscdevice pm_qos_power_miscdev; char *name; s32 default_value; s32 target_value; s32 (*comparitor)(s32, s32); }; -static struct pm_qos_object pm_qos_array[PM_QOS_NUM_CLASSES]; + +static struct pm_qos_object null_pm_qos; +static BLOCKING_NOTIFIER_HEAD(cpu_dma_lat_notifier); +static struct pm_qos_object cpu_dma_pm_qos = { + .requirements = {LIST_HEAD_INIT(cpu_dma_pm_qos.requirements.list)}, + .notifiers = &cpu_dma_lat_notifier, + .name = "cpu_dma_latency", + .default_value = 2000 * USEC_PER_SEC, + .target_value = 2000 * USEC_PER_SEC, + .comparitor = min_compare +}; + +static BLOCKING_NOTIFIER_HEAD(network_lat_notifier); +static struct pm_qos_object network_lat_pm_qos = { + .requirements = {LIST_HEAD_INIT(network_lat_pm_qos.requirements.list)}, + .notifiers = &network_lat_notifier, + .name = "network_latency", + .default_value = 2000 * USEC_PER_SEC, + .target_value = 2000 * USEC_PER_SEC, + .comparitor = min_compare +}; + + +static BLOCKING_NOTIFIER_HEAD(network_throughput_notifier); +static struct pm_qos_object network_throughput_pm_qos = { + .requirements = + {LIST_HEAD_INIT(network_throughput_pm_qos.requirements.list)}, + .notifiers = &network_throughput_notifier, + .name = "network_throughput", + .default_value = 0, + .target_value = 0, + .comparitor = max_compare +}; + + +static struct pm_qos_object *pm_qos_array[] = { + &null_pm_qos, + &cpu_dma_pm_qos, + &network_lat_pm_qos, + &network_throughput_pm_qos +}; + static DEFINE_SPINLOCK(pm_qos_lock); static ssize_t pm_qos_power_write(struct file *filp, const char __user *buf, @@ -81,29 +134,31 @@ return min(v1, v2); } + + /* assumes pm_qos_lock is held */ static void update_target(int target) { s32 extreme_value; struct requirement_list *node; - extreme_value = pm_qos_array[target].default_value; + extreme_value = pm_qos_array[target]->default_value; list_for_each_entry(node, - &pm_qos_array[target].requirements.list, list) { - extreme_value = pm_qos_array[target].comparitor( + &pm_qos_array[target]->requirements.list, list) { + extreme_value = pm_qos_array[target]->comparitor( extreme_value, node->value); } - if (pm_qos_array[target].target_value != extreme_value) { - pm_qos_array[target].target_value = extreme_value; + if (pm_qos_array[target]->target_value != extreme_value) { + pm_qos_array[target]->target_value = extreme_value; pr_debug(KERN_ERR "new target for qos %d is %d\n", target, - pm_qos_array[target].target_value); - srcu_notifier_call_chain(&pm_qos_array[target].notifiers, - (unsigned long) pm_qos_array[target].target_value, + pm_qos_array[target]->target_value); + blocking_notifier_call_chain(pm_qos_array[target]->notifiers, + (unsigned long) pm_qos_array[target]->target_value, NULL); } } -static int register_new_pm_qos_misc(struct pm_qos_object *qos) +static int register_pm_qos_misc(struct pm_qos_object *qos) { qos->pm_qos_power_miscdev.minor = MISC_DYNAMIC_MINOR; qos->pm_qos_power_miscdev.name = qos->name; @@ -112,38 +167,6 @@ return misc_register(&qos->pm_qos_power_miscdev); } - -/* constructors */ -static int init_pm_qos_object(int pm_qos_class, const char *name, - s32 default_value, s32 (*comparitor)(s32, s32)) -{ - int ret = -ENOMEM; - struct pm_qos_object *qos = NULL; - - if (pm_qos_class < PM_QOS_NUM_CLASSES) { - qos = &pm_qos_array[pm_qos_class]; - qos->name = kstrdup(name, GFP_KERNEL); - if (!qos->name) - goto cleanup; - - qos->default_value = default_value; - qos->target_value = default_value; - qos->comparitor = comparitor; - srcu_init_notifier_head(&qos->notifiers); - INIT_LIST_HEAD(&qos->requirements.list); - ret = register_new_pm_qos_misc(qos); - if (ret < 0) - goto cleanup; - } else - ret = -EINVAL; - - return ret; -cleanup: - kfree(qos->name); - - return ret; -} - static int find_pm_qos_object_by_minor(int minor) { int pm_qos_class; @@ -151,24 +174,12 @@ for (pm_qos_class = 0; pm_qos_class < PM_QOS_NUM_CLASSES; pm_qos_class++) { if (minor == - pm_qos_array[pm_qos_class].pm_qos_power_miscdev.minor) + pm_qos_array[pm_qos_class]->pm_qos_power_miscdev.minor) return pm_qos_class; } return -1; } -static int new_latency_qos(int pm_qos_class, const char *name) -{ - return init_pm_qos_object(pm_qos_class, name, 2000 * USEC_PER_SEC, - min_compare); - /* 2000 sec is about infinite */ -} - -static int new_throughput_qos(int pm_qos_class, const char *name) -{ - return init_pm_qos_object(pm_qos_class, name, 0, max_compare); -} - /** * pm_qos_requirement - returns current system wide qos expectation * @pm_qos_class: identification of which qos value is requested @@ -181,7 +192,7 @@ unsigned long flags; spin_lock_irqsave(&pm_qos_lock, flags); - ret_val = pm_qos_array[pm_qos_class].target_value; + ret_val = pm_qos_array[pm_qos_class]->target_value; spin_unlock_irqrestore(&pm_qos_lock, flags); return ret_val; @@ -206,7 +217,7 @@ dep = kzalloc(sizeof(struct requirement_list), GFP_KERNEL); if (dep) { if (value == PM_QOS_DEFAULT_VALUE) - dep->value = pm_qos_array[pm_qos_class].default_value; + dep->value = pm_qos_array[pm_qos_class]->default_value; else dep->value = value; dep->name = kstrdup(name, GFP_KERNEL); @@ -215,7 +226,7 @@ spin_lock_irqsave(&pm_qos_lock, flags); list_add(&dep->list, - &pm_qos_array[pm_qos_class].requirements.list); + &pm_qos_array[pm_qos_class]->requirements.list); update_target(pm_qos_class); spin_unlock_irqrestore(&pm_qos_lock, flags); @@ -247,11 +258,11 @@ spin_lock_irqsave(&pm_qos_lock, flags); list_for_each_entry(node, - &pm_qos_array[pm_qos_class].requirements.list, list) { + &pm_qos_array[pm_qos_class]->requirements.list, list) { if (strcmp(node->name, name) == 0) { if (new_value == PM_QOS_DEFAULT_VALUE) node->value = - pm_qos_array[pm_qos_class].default_value; + pm_qos_array[pm_qos_class]->default_value; else node->value = new_value; pending_update = 1; @@ -283,7 +294,7 @@ spin_lock_irqsave(&pm_qos_lock, flags); list_for_each_entry(node, - &pm_qos_array[pm_qos_class].requirements.list, list) { + &pm_qos_array[pm_qos_class]->requirements.list, list) { if (strcmp(node->name, name) == 0) { kfree(node->name); list_del(&node->list); @@ -312,8 +323,8 @@ int retval; spin_lock_irqsave(&pm_qos_lock, flags); - retval = srcu_notifier_chain_register( - &pm_qos_array[pm_qos_class].notifiers, notifier); + retval = blocking_notifier_chain_register( + pm_qos_array[pm_qos_class]->notifiers, notifier); spin_unlock_irqrestore(&pm_qos_lock, flags); return retval; @@ -334,8 +345,8 @@ int retval; spin_lock_irqsave(&pm_qos_lock, flags); - retval = srcu_notifier_chain_unregister( - &pm_qos_array[pm_qos_class].notifiers, notifier); + retval = blocking_notifier_chain_unregister( + pm_qos_array[pm_qos_class]->notifiers, notifier); spin_unlock_irqrestore(&pm_qos_lock, flags); return retval; @@ -395,18 +406,18 @@ static int __init pm_qos_power_init(void) { int ret = 0; - ret = new_latency_qos(PM_QOS_CPU_DMA_LATENCY, "cpu_dma_latency"); + + ret = register_pm_qos_misc(&cpu_dma_pm_qos); if (ret < 0) { printk(KERN_ERR "pm_qos_param: cpu_dma_latency setup failed\n"); return ret; } - ret = new_latency_qos(PM_QOS_NETWORK_LATENCY, "network_latency"); + ret = register_pm_qos_misc(&network_lat_pm_qos); if (ret < 0) { printk(KERN_ERR "pm_qos_param: network_latency setup failed\n"); return ret; } - ret = new_throughput_qos(PM_QOS_NETWORK_THROUGHPUT, - "network_throughput"); + ret = register_pm_qos_misc(&network_throughput_pm_qos); if (ret < 0) printk(KERN_ERR "pm_qos_param: network_throughput setup failed\n"); ^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH] static initialization and blocking notification for pm_qos... was Re: 2.6.23-mm1 2007-10-12 21:32 ` 2.6.23-mm1 Rafael J. Wysocki 2007-10-15 16:09 ` 2.6.23-mm1 Mark Gross @ 2007-10-17 17:21 ` Mark Gross 1 sibling, 0 replies; 8+ messages in thread From: Mark Gross @ 2007-10-17 17:21 UTC (permalink / raw) To: Rafael J. Wysocki Cc: Andrew Morton, linux-kernel, ACPI Devel Maling List, Len Brown, Arjan van de Ven On Fri, Oct 12, 2007 at 11:32:40PM +0200, Rafael J. Wysocki wrote: > On Friday, 12 October 2007 06:31, Andrew Morton wrote: > > > > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.23/2.6.23-mm1/ > > > > - I've been largely avoiding applying anything since rc8-mm2 in an attempt > > to stabilise things for the 2.6.23 merge. > > > > But that didn't stop all the subsystem maintainers from going nuts, with > > the usual accuracy. We're up to a 37MB diff now, but it seems to be working > > a bit better. > > I get many traces similar to the one below from it (w/ hotfixes): > > WARNING: at /home/rafael/src/mm/linux-2.6.23-mm1/arch/x86_64/kernel/smp.c:397 smp_call_function_mask() > > Call Trace: > [<ffffffff8021b290>] smp_call_function_mask+0x4b/0x82 > [<ffffffff8021b2ea>] smp_call_function+0x23/0x25 > [<ffffffff884a0b80>] :processor:acpi_processor_latency_notify+0x19/0x20 > [<ffffffff80437ace>] notifier_call_chain+0x33/0x65 > [<ffffffff8024f32f>] __srcu_notifier_call_chain+0x4b/0x69 > [<ffffffff8024f07c>] pm_qos_add_requirement+0x24/0xd2 > [<ffffffff8024f35c>] srcu_notifier_call_chain+0xf/0x11 > [<ffffffff8024ee6d>] update_target+0x71/0x76 > [<ffffffff8024f101>] pm_qos_add_requirement+0xa9/0xd2 > [<ffffffff88160bf9>] :snd_pcm:snd_pcm_hw_params+0x349/0x382 > [<ffffffff80291110>] kmem_cache_alloc+0x8a/0xbc > [<ffffffff88160d75>] :snd_pcm:snd_pcm_hw_params_user+0x50/0x87 > [<ffffffff88160fe1>] :snd_pcm:snd_pcm_common_ioctl1+0x1ae/0xd4f > [<ffffffff8815f755>] :snd_pcm:snd_pcm_open+0xd6/0x1f2 > [<ffffffff8028fc17>] cache_alloc_debugcheck_after+0x11a/0x199 > [<ffffffff8024b514>] remove_wait_queue+0x40/0x45 > [<ffffffff8815f7bd>] :snd_pcm:snd_pcm_open+0x13e/0x1f2 > [<ffffffff8022f18e>] default_wake_function+0x0/0xf > [<ffffffff8030b24d>] prio_tree_insert+0x18c/0x231 > [<ffffffff8027b5fb>] vma_prio_tree_insert+0x23/0x39 > [<ffffffff80282e91>] vma_link+0xdd/0x10b > [<ffffffff8816206f>] :snd_pcm:snd_pcm_playback_ioctl1+0x24d/0x26a > [<ffffffff8816292c>] :snd_pcm:snd_pcm_playback_ioctl+0x2e/0x36 > [<ffffffff802a0896>] do_ioctl+0x2a/0x77 > [<ffffffff802a0b34>] vfs_ioctl+0x251/0x26e > [<ffffffff802a0ba8>] sys_ioctl+0x57/0x7b > [<ffffffff8020bfde>] system_call+0x7e/0x83 > > Full dmesg attached. > ubject: [PATCH] static initialization and blocking notification for pm_qos... was Re: 2.6.23-mm1 please try this patch and let me know if the warnings go away. (I have not been able to reproduce your issue.) The following is a patch to update the pm_qos code in the mm1 tree. It removes the PM_QOS_CPUIDLE parameter (replacing it with PM_CPU_DMA_LATENCY), It changes the notifications from srcu to blocking in hopes of fixing the WARNS reported by xxx, and it changes the initialization to me largely static to avoid initialization race with cpu-idle. I think we will have to re-visit the static vrs dynamic initialization and this init race in a while to support pm_qos parameters per power domain (i.e. per cpu-socket) based on platform information (ACPI) but for now lets see if this fixes the warning's reported. Thanks, Signed-off-by: mark gross <mgross@linux.intel.com> Binary files linux-2.6.23-mm1/arch/x86_64/ia32/vsyscall-syscall.so.dbg and linux-2.6.23-mm1-pmqos/arch/x86_64/ia32/vsyscall-syscall.so.dbg differ Binary files linux-2.6.23-mm1/arch/x86_64/ia32/vsyscall-sysenter.so.dbg and linux-2.6.23-mm1-pmqos/arch/x86_64/ia32/vsyscall-sysenter.so.dbg differ Binary files linux-2.6.23-mm1/arch/x86_64/vdso/vdso.so.dbg and linux-2.6.23-mm1-pmqos/arch/x86_64/vdso/vdso.so.dbg differ diff -urN -X linux-2.6.23-mm1/Documentation/dontdiff linux-2.6.23-mm1/drivers/cpuidle/cpuidle.c linux-2.6.23-mm1-pmqos/drivers/cpuidle/cpuidle.c --- linux-2.6.23-mm1/drivers/cpuidle/cpuidle.c 2007-10-16 15:03:30.000000000 -0700 +++ linux-2.6.23-mm1-pmqos/drivers/cpuidle/cpuidle.c 2007-10-17 09:26:21.000000000 -0700 @@ -268,7 +268,7 @@ static inline void latency_notifier_init(struct notifier_block *n) { - pm_qos_add_notifier(PM_QOS_CPUIDLE, n); + pm_qos_add_notifier(PM_QOS_CPU_DMA_LATENCY, n); } #else /* CONFIG_SMP */ diff -urN -X linux-2.6.23-mm1/Documentation/dontdiff linux-2.6.23-mm1/drivers/cpuidle/governors/ladder.c linux-2.6.23-mm1-pmqos/drivers/cpuidle/governors/ladder.c --- linux-2.6.23-mm1/drivers/cpuidle/governors/ladder.c 2007-10-16 15:03:30.000000000 -0700 +++ linux-2.6.23-mm1-pmqos/drivers/cpuidle/governors/ladder.c 2007-10-17 09:26:21.000000000 -0700 @@ -82,7 +82,7 @@ if (last_idx < dev->state_count - 1 && last_residency > last_state->threshold.promotion_time && dev->states[last_idx + 1].exit_latency <= - pm_qos_requirement(PM_QOS_CPUIDLE)) { + pm_qos_requirement(PM_QOS_CPU_DMA_LATENCY)) { last_state->stats.promotion_count++; last_state->stats.demotion_count = 0; if (last_state->stats.promotion_count >= last_state->threshold.promotion_count) { diff -urN -X linux-2.6.23-mm1/Documentation/dontdiff linux-2.6.23-mm1/drivers/cpuidle/governors/menu.c linux-2.6.23-mm1-pmqos/drivers/cpuidle/governors/menu.c --- linux-2.6.23-mm1/drivers/cpuidle/governors/menu.c 2007-10-16 15:03:30.000000000 -0700 +++ linux-2.6.23-mm1-pmqos/drivers/cpuidle/governors/menu.c 2007-10-17 09:26:21.000000000 -0700 @@ -48,7 +48,7 @@ break; if (s->target_residency > data->predicted_us) break; - if (s->exit_latency > pm_qos_requirement(PM_QOS_CPUIDLE)) + if (s->exit_latency > pm_qos_requirement(PM_QOS_CPU_DMA_LATENCY)) break; } diff -urN -X linux-2.6.23-mm1/Documentation/dontdiff linux-2.6.23-mm1/include/linux/pm_qos_params.h linux-2.6.23-mm1-pmqos/include/linux/pm_qos_params.h --- linux-2.6.23-mm1/include/linux/pm_qos_params.h 2007-10-16 15:04:26.000000000 -0700 +++ linux-2.6.23-mm1-pmqos/include/linux/pm_qos_params.h 2007-10-17 09:54:00.000000000 -0700 @@ -6,23 +6,12 @@ #include <linux/notifier.h> #include <linux/miscdevice.h> -struct requirement_list { - struct list_head list; - union { - s32 value; - s32 usec; - s32 kbps; - }; - char *name; -}; - #define PM_QOS_RESERVED 0 #define PM_QOS_CPU_DMA_LATENCY 1 #define PM_QOS_NETWORK_LATENCY 2 #define PM_QOS_NETWORK_THROUGHPUT 3 -#define PM_QOS_CPUIDLE 4 -#define PM_QOS_NUM_CLASSES 5 +#define PM_QOS_NUM_CLASSES 4 #define PM_QOS_DEFAULT_VALUE -1 int pm_qos_add_requirement(int qos, char *name, s32 value); diff -urN -X linux-2.6.23-mm1/Documentation/dontdiff linux-2.6.23-mm1/kernel/pm_qos_params.c linux-2.6.23-mm1-pmqos/kernel/pm_qos_params.c --- linux-2.6.23-mm1/kernel/pm_qos_params.c 2007-10-16 15:04:27.000000000 -0700 +++ linux-2.6.23-mm1-pmqos/kernel/pm_qos_params.c 2007-10-17 09:24:46.000000000 -0700 @@ -46,17 +46,70 @@ * or pm_qos_object list and pm_qos_objects need to happen with pm_qos_lock * held, taken with _irqsave. One lock to rule them all */ +struct requirement_list { + struct list_head list; + union { + s32 value; + s32 usec; + s32 kbps; + }; + char *name; +}; + +static s32 max_compare(s32 v1, s32 v2); +static s32 min_compare(s32 v1, s32 v2); struct pm_qos_object { struct requirement_list requirements; - struct srcu_notifier_head notifiers; + struct blocking_notifier_head *notifiers; struct miscdevice pm_qos_power_miscdev; char *name; s32 default_value; s32 target_value; s32 (*comparitor)(s32, s32); }; -static struct pm_qos_object pm_qos_array[PM_QOS_NUM_CLASSES]; + +static struct pm_qos_object null_pm_qos; +static BLOCKING_NOTIFIER_HEAD(cpu_dma_lat_notifier); +static struct pm_qos_object cpu_dma_pm_qos = { + .requirements = {LIST_HEAD_INIT(cpu_dma_pm_qos.requirements.list)}, + .notifiers = &cpu_dma_lat_notifier, + .name = "cpu_dma_latency", + .default_value = 2000 * USEC_PER_SEC, + .target_value = 2000 * USEC_PER_SEC, + .comparitor = min_compare +}; + +static BLOCKING_NOTIFIER_HEAD(network_lat_notifier); +static struct pm_qos_object network_lat_pm_qos = { + .requirements = {LIST_HEAD_INIT(network_lat_pm_qos.requirements.list)}, + .notifiers = &network_lat_notifier, + .name = "network_latency", + .default_value = 2000 * USEC_PER_SEC, + .target_value = 2000 * USEC_PER_SEC, + .comparitor = min_compare +}; + + +static BLOCKING_NOTIFIER_HEAD(network_throughput_notifier); +static struct pm_qos_object network_throughput_pm_qos = { + .requirements = + {LIST_HEAD_INIT(network_throughput_pm_qos.requirements.list)}, + .notifiers = &network_throughput_notifier, + .name = "network_throughput", + .default_value = 0, + .target_value = 0, + .comparitor = max_compare +}; + + +static struct pm_qos_object *pm_qos_array[] = { + &null_pm_qos, + &cpu_dma_pm_qos, + &network_lat_pm_qos, + &network_throughput_pm_qos +}; + static DEFINE_SPINLOCK(pm_qos_lock); static ssize_t pm_qos_power_write(struct file *filp, const char __user *buf, @@ -81,29 +134,31 @@ return min(v1, v2); } + + /* assumes pm_qos_lock is held */ static void update_target(int target) { s32 extreme_value; struct requirement_list *node; - extreme_value = pm_qos_array[target].default_value; + extreme_value = pm_qos_array[target]->default_value; list_for_each_entry(node, - &pm_qos_array[target].requirements.list, list) { - extreme_value = pm_qos_array[target].comparitor( + &pm_qos_array[target]->requirements.list, list) { + extreme_value = pm_qos_array[target]->comparitor( extreme_value, node->value); } - if (pm_qos_array[target].target_value != extreme_value) { - pm_qos_array[target].target_value = extreme_value; + if (pm_qos_array[target]->target_value != extreme_value) { + pm_qos_array[target]->target_value = extreme_value; pr_debug(KERN_ERR "new target for qos %d is %d\n", target, - pm_qos_array[target].target_value); - srcu_notifier_call_chain(&pm_qos_array[target].notifiers, - (unsigned long) pm_qos_array[target].target_value, + pm_qos_array[target]->target_value); + blocking_notifier_call_chain(pm_qos_array[target]->notifiers, + (unsigned long) pm_qos_array[target]->target_value, NULL); } } -static int register_new_pm_qos_misc(struct pm_qos_object *qos) +static int register_pm_qos_misc(struct pm_qos_object *qos) { qos->pm_qos_power_miscdev.minor = MISC_DYNAMIC_MINOR; qos->pm_qos_power_miscdev.name = qos->name; @@ -112,38 +167,6 @@ return misc_register(&qos->pm_qos_power_miscdev); } - -/* constructors */ -static int init_pm_qos_object(int pm_qos_class, const char *name, - s32 default_value, s32 (*comparitor)(s32, s32)) -{ - int ret = -ENOMEM; - struct pm_qos_object *qos = NULL; - - if (pm_qos_class < PM_QOS_NUM_CLASSES) { - qos = &pm_qos_array[pm_qos_class]; - qos->name = kstrdup(name, GFP_KERNEL); - if (!qos->name) - goto cleanup; - - qos->default_value = default_value; - qos->target_value = default_value; - qos->comparitor = comparitor; - srcu_init_notifier_head(&qos->notifiers); - INIT_LIST_HEAD(&qos->requirements.list); - ret = register_new_pm_qos_misc(qos); - if (ret < 0) - goto cleanup; - } else - ret = -EINVAL; - - return ret; -cleanup: - kfree(qos->name); - - return ret; -} - static int find_pm_qos_object_by_minor(int minor) { int pm_qos_class; @@ -151,24 +174,12 @@ for (pm_qos_class = 0; pm_qos_class < PM_QOS_NUM_CLASSES; pm_qos_class++) { if (minor == - pm_qos_array[pm_qos_class].pm_qos_power_miscdev.minor) + pm_qos_array[pm_qos_class]->pm_qos_power_miscdev.minor) return pm_qos_class; } return -1; } -static int new_latency_qos(int pm_qos_class, const char *name) -{ - return init_pm_qos_object(pm_qos_class, name, 2000 * USEC_PER_SEC, - min_compare); - /* 2000 sec is about infinite */ -} - -static int new_throughput_qos(int pm_qos_class, const char *name) -{ - return init_pm_qos_object(pm_qos_class, name, 0, max_compare); -} - /** * pm_qos_requirement - returns current system wide qos expectation * @pm_qos_class: identification of which qos value is requested @@ -181,7 +192,7 @@ unsigned long flags; spin_lock_irqsave(&pm_qos_lock, flags); - ret_val = pm_qos_array[pm_qos_class].target_value; + ret_val = pm_qos_array[pm_qos_class]->target_value; spin_unlock_irqrestore(&pm_qos_lock, flags); return ret_val; @@ -206,7 +217,7 @@ dep = kzalloc(sizeof(struct requirement_list), GFP_KERNEL); if (dep) { if (value == PM_QOS_DEFAULT_VALUE) - dep->value = pm_qos_array[pm_qos_class].default_value; + dep->value = pm_qos_array[pm_qos_class]->default_value; else dep->value = value; dep->name = kstrdup(name, GFP_KERNEL); @@ -215,7 +226,7 @@ spin_lock_irqsave(&pm_qos_lock, flags); list_add(&dep->list, - &pm_qos_array[pm_qos_class].requirements.list); + &pm_qos_array[pm_qos_class]->requirements.list); update_target(pm_qos_class); spin_unlock_irqrestore(&pm_qos_lock, flags); @@ -247,11 +258,11 @@ spin_lock_irqsave(&pm_qos_lock, flags); list_for_each_entry(node, - &pm_qos_array[pm_qos_class].requirements.list, list) { + &pm_qos_array[pm_qos_class]->requirements.list, list) { if (strcmp(node->name, name) == 0) { if (new_value == PM_QOS_DEFAULT_VALUE) node->value = - pm_qos_array[pm_qos_class].default_value; + pm_qos_array[pm_qos_class]->default_value; else node->value = new_value; pending_update = 1; @@ -283,7 +294,7 @@ spin_lock_irqsave(&pm_qos_lock, flags); list_for_each_entry(node, - &pm_qos_array[pm_qos_class].requirements.list, list) { + &pm_qos_array[pm_qos_class]->requirements.list, list) { if (strcmp(node->name, name) == 0) { kfree(node->name); list_del(&node->list); @@ -312,8 +323,8 @@ int retval; spin_lock_irqsave(&pm_qos_lock, flags); - retval = srcu_notifier_chain_register( - &pm_qos_array[pm_qos_class].notifiers, notifier); + retval = blocking_notifier_chain_register( + pm_qos_array[pm_qos_class]->notifiers, notifier); spin_unlock_irqrestore(&pm_qos_lock, flags); return retval; @@ -334,8 +345,8 @@ int retval; spin_lock_irqsave(&pm_qos_lock, flags); - retval = srcu_notifier_chain_unregister( - &pm_qos_array[pm_qos_class].notifiers, notifier); + retval = blocking_notifier_chain_unregister( + pm_qos_array[pm_qos_class]->notifiers, notifier); spin_unlock_irqrestore(&pm_qos_lock, flags); return retval; @@ -395,18 +406,18 @@ static int __init pm_qos_power_init(void) { int ret = 0; - ret = new_latency_qos(PM_QOS_CPU_DMA_LATENCY, "cpu_dma_latency"); + + ret = register_pm_qos_misc(&cpu_dma_pm_qos); if (ret < 0) { printk(KERN_ERR "pm_qos_param: cpu_dma_latency setup failed\n"); return ret; } - ret = new_latency_qos(PM_QOS_NETWORK_LATENCY, "network_latency"); + ret = register_pm_qos_misc(&network_lat_pm_qos); if (ret < 0) { printk(KERN_ERR "pm_qos_param: network_latency setup failed\n"); return ret; } - ret = new_throughput_qos(PM_QOS_NETWORK_THROUGHPUT, - "network_throughput"); + ret = register_pm_qos_misc(&network_throughput_pm_qos); if (ret < 0) printk(KERN_ERR "pm_qos_param: network_throughput setup failed\n"); ^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2007-10-17 21:22 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <20071011213126.cf92efb7.akpm@linux-foundation.org>
2007-10-12 21:32 ` 2.6.23-mm1 Rafael J. Wysocki
2007-10-15 16:09 ` 2.6.23-mm1 Mark Gross
2007-10-15 20:40 ` 2.6.23-mm1 Rafael J. Wysocki
2007-10-16 19:58 ` 2.6.23-mm1 Mark Gross
2007-10-16 20:28 ` 2.6.23-mm1 Rafael J. Wysocki
2007-10-16 23:31 ` 2.6.23-mm1 Mark Gross
2007-10-17 21:15 ` [PATCH] static initialization with blocking notifiers. was :wqRe: 2.6.23-mm1 Mark Gross
2007-10-17 17:21 ` [PATCH] static initialization and blocking notification for pm_qos... was 2.6.23-mm1 Mark Gross
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).