From mboxrd@z Thu Jan 1 00:00:00 1970 From: Elvis Pranskevichus Subject: Re: [lm-sensors] 2.6.24-rc4 hwmon it87 probe fails Date: Wed, 19 Dec 2007 21:13:22 -0500 Message-ID: <200712192113.22974.el@prans.net> References: <20071204215154.7f26285e.mikeserv@bmts.com> <200712191720.23026.bjorn.helgaas@hp.com> <200712200045.16899.carlos@strangeworlds.co.uk> Mime-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Return-path: Received: from mail.prans.org ([64.79.206.200]:49178 "EHLO mail.prans.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753738AbXLTCNw (ORCPT ); Wed, 19 Dec 2007 21:13:52 -0500 In-Reply-To: <200712200045.16899.carlos@strangeworlds.co.uk> Content-Disposition: inline Sender: linux-acpi-owner@vger.kernel.org List-Id: linux-acpi@vger.kernel.org To: Carlos Corbacho Cc: Bjorn Helgaas , Jean Delvare , Shaohua Li , Mike Houston , Adrian Bunk , mhoffman@lightlink.com, linux-kernel@vger.kernel.org, lm-sensors@lm-sensors.org, Adam Belay , Zhao Yakui , Thomas Renninger , lenb@kernel.org, linux-acpi@vger.kernel.org On Wednesday December 19 2007 07:45:14 pm Carlos Corbacho wrote: > On Thursday 20 December 2007 00:20:21 Bjorn Helgaas wrote: > > I suspect the manufacturers would say "Oh, the sensors? The BIOS > > isn't broken, you're just supposed to use WMI or some (undocumented) > > ACPI device to get at those." > > It's quite possible - can we have DSDTs for the boards in question so we > can quickly check if this is a possibility? (Basically, to see if they have > PNP0C14 devices - if they don't, then I'm afraid it's nothing to do with > WMI). > > -Carlos Hi Carlos, I've attached the DSDT for Gigabyte GA-965G-DS3 (rev 1.0, bios rev. F9) to bugzilla entry #9514: http://bugzilla.kernel.org/attachment.cgi?id=14132 Thanks, -- Elvis