From: Carlos Corbacho <carlos@strangeworlds.co.uk>
To: linux-acpi@vger.kernel.org
Cc: Len Brown <lenb@kernel.org>,
Matthew Garrett <mjg59@srcf.ucam.org>,
Alexey Starikovskiy <aystarik@gmail.com>
Subject: [PATCH 0/5] WMI patches for acpi-test
Date: Sat, 02 Feb 2008 12:17:18 +0000 [thread overview]
Message-ID: <20080202121718.2286.89857.stgit@pacifica> (raw)
Len,
Can you please review, and hopefully apply, at least the first two patches in
this series, as I would like to get them into acpi-test (then -mm and eventually
2.6.26-rc1).
It's a little late now to put these into 2.6.25-rc1, and I don't want to
miss another merge window - so the sooner these are looked at by you, the sooner
I can address any concerns and we can have these ready for the 2.6.26-rc1
window.
-Carlos
===
Patch #1: (WMI - driver and in kernel interface) - Minor clean up
Replace leftover occurences of 'x == NULL' with '!x'
Len: For you to review and to be applied to acpi-test.
====
Patch #2: (acer-wmi) - New DMI entry, mail LED detection fix, mismatch fix
* Don't fail if we can't detect a mail LED on AMW0 systems
* Add an EC quirk for the Acer Aspire 9110
* Fix section mismatch warnings
Len: For you to review and to be applied to acpi-test.
====
Patch #3: (tc1100-wmi) - No Change
RFC only, needs actual testing on the hardware, and probably very broken.
Waiting on Matthew Garrett to get some free time to test this.
====
Patch #4: (WMI sysfs interface) - No Change
RFC only (see patch #5 for reason and discussion). Adds interface under
/sys/devices/virtual/wmi
Also adds a function to return the (virtual) device associated with a GUID for
use by other parts of the kernel that want to set a parent device.
Len: To review (but not to apply yet, unless you want to apply patch #5 as well)
====
Patch #5: (WMI sysfs workaround) - No Change
Temporary hack, needed to get patch #4 working, due to a limitation on bus_id
length (Kay Sievers is apparently working on this, ref Greg KH[1]).
Len:
Apparently, the necessary fixes _might_ go into 2.6.25 as well, or worst case
scenario is 2.6.26[2]. So we can either:
1) Hold off on patch #4 until the necessary fixes go in (this might be 2.6.25
if we're lucky, or we end up putting off WMI sysfs support until 2.6.26)
or
2) Apply patch #4, and #5 on top as a temporary hack, and then revert #5 as
soon as the necessary changes go in. (For bisection purposes, #4 and #5 should
be merged if we go ahead with this).
I don't know what would be the best solution here.
[1] http://lkml.org/lkml/2007/12/4/30
[2] http://www.nabble.com/Re:-Fix-Firmware-class-name-collision-p14352966.html
---
Carlos Corbacho (5):
[WIP] ACPI: WMI: Limit size of device string to 19 characters
[RFC] ACPI: WMI: Add sysfs userspace interface
[RFC] tc1100-wmi: Add driver for HP Compaq TC1100 Tablets
acer-wmi: Add driver for newer Acer laptops
ACPI: WMI: Add ACPI-WMI mapping driver
MAINTAINERS | 7
drivers/acpi/Kconfig | 11
drivers/acpi/Makefile | 1
drivers/acpi/wmi.c | 1190 +++++++++++++++++++++++++++++++++++++++++++++
drivers/misc/Kconfig | 25 +
drivers/misc/Makefile | 2
drivers/misc/acer-wmi.c | 1109 ++++++++++++++++++++++++++++++++++++++++++
drivers/misc/tc1100-wmi.c | 290 +++++++++++
include/linux/acpi.h | 21 +
9 files changed, 2656 insertions(+), 0 deletions(-)
create mode 100644 drivers/acpi/wmi.c
create mode 100644 drivers/misc/acer-wmi.c
create mode 100644 drivers/misc/tc1100-wmi.c
next reply other threads:[~2008-02-02 12:17 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-02-02 12:17 Carlos Corbacho [this message]
2008-02-02 12:17 ` [PATCH 1/5] ACPI: WMI: Add ACPI-WMI mapping driver Carlos Corbacho
2008-02-02 12:17 ` [PATCH 2/5] acer-wmi: Add driver for newer Acer laptops Carlos Corbacho
2008-02-02 12:17 ` [PATCH 3/5] [RFC] tc1100-wmi: Add driver for HP Compaq TC1100 Tablets Carlos Corbacho
2008-02-02 12:17 ` [PATCH 4/5] [RFC] ACPI: WMI: Add sysfs userspace interface Carlos Corbacho
2008-02-02 12:17 ` [PATCH 5/5] [WIP] ACPI: WMI: Limit size of device string to 19 characters Carlos Corbacho
2008-02-03 3:44 ` [PATCH 0/5] WMI patches for acpi-test Len Brown
2008-02-03 9:45 ` Carlos Corbacho
2008-02-04 6:30 ` Len Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080202121718.2286.89857.stgit@pacifica \
--to=carlos@strangeworlds.co.uk \
--cc=aystarik@gmail.com \
--cc=lenb@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=mjg59@srcf.ucam.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox